TM70 Ex

ATEX: Zones 1 y 2 / II 2 GD
IECEx: Zones 1 y 2 / IECEx II 2 GD
CHARACTERISTICS

• Available frequency bands: 870/915/MHz. • Auxiliary mechanisms: –LBT / Listen Before Talking-
• BT06K-ATEX NiMH rechargeable batteries. - 1-0-1 type position selector switches with • CAN bus physical layer compatible receiver
• New battery charger CB70, with fast (< 2 maintained position or forced return to 0 with CANopen communication protocol;
hours) and intelligent charging mode position (optional) other available communication protocols,
• External and extractable SIM module - 0-1 type position selector switches with IQAN, SAE J1939, Profibus DP and RS-232 /
(extractable EP70) to configure easily a maintained position or forced return to 0 RS-485
spare transmitter providing easy and fast position (optional)
maintenance. • Easy working frequency channel change
• Main mechanisms: and management by software and/or auto
- High sensitivity two step push buttons matic working channel selection

SHOCK absorbers
Maintained or spring
return switch (optional)

Extractable SIM module

(EEPROM)

LED de señalización

Two steps pushbuttons

Battery

Extractable contact
key switch

SHOCK absorbers

STOP pushbutton START pushbutton

>>> Transmitter Mark >>> Receiver Mark

II 2 GD II 2 GD
Ex ib IIB T4 Ex d ia IIB T5
Ex ibD 21 T135ºC Ex tD iaD A21 IP65 T100ºC
CE 0080 R.temp: -20ºC + 70ºC
INERIS 08ATEX0006 CE 0080
IECEx INE 09.0014 INERIS 08ATEX 029 >>> TM 70 ATEX Receiver
MAIN CHARACTERISTICS:

TRANSMITTERS CHARACTERISTICS
Model (Reference) T70/1/870 ATEX (2800044) T70/2/870 ATEX (2800045)
T70/1 915 IECEx (2800052) T70/2 915 IECEx (2800053)
Technical characteristics
IP / NEMA Ingress protection IP65 / NEMA-4
Battery life >8h (50% duty cycle)
Operating temperature range -20ºC +70ºC
Battery type / nominal charge BT06K-ATEX / 500mAh
Battery charger compatibility BC70K o CB70
Orange LED signalling Replaced by double LED signalling (green + red)
DLA (display and limit range option) Not available
Feedback information option Not available
Antenna Internal
SIM module –customized operating parameters- Extractable EP70 EEPROM module
Maximum number of maneuvres 6 + START + STOP 10 + START + STOP
Weight -including battery- 500 g 600 g
CB70 BATTERY CHARGER TECHNICAL CHARACTERISTICS
(AC) Power supply 115, 230 Vac ± 10%; 50/60Hz (according to charger model)
(DC) Power supply 10,5 – 35 Vdc
Charging mode Fast (< 2 hours) and intelligent (adapted to each battery model)
BT06K-ATEX BATTERY TECHNICAL CHARACTERISTICS
Model BT06K-ATEX
Type NiMH
Capacity 500 mAh, 4,8 V
Charging/Discharging temperature range 0 - 70ºC
RECEIVER TECHNICAL SPECIFICATIONS
References Models
2305184 R70/13-ATEX
2305185 R70/21-ATEX
RECEIVER TECHNICAL CHARACTERISTICS
Receiver types R70/13 ATEX R70/21 ATEX
(AC) power supply 48,115,230 Vac ± 10%; 50/60Hz
(DC) power supply On request
External Length = 420mm / Width = 320mm / Heigth = 250mm
Weight 20 Kgr.
Antenna External (internal antenna isolator included)
Operating temperature range -20ºC +70ºC
IP / NEMA Ingress protection IP65 / NEMA-4
Consumption 12 VA 16VA
Number of outputs –relays- 13 21
Other additional outputs –relays- START + STOP(2) + SECURITY (KSAFETY)
STOP function Category 3, according to EN-954-1 or EN 13849 safety standards
Maneuvre relay characteristics 230 Vac / 8A ACI
STOP relay characteristics 230 Vac / 6A ACI
TM70 Ex

HEADQUARTERS - SPAIN
IKUSI - Ángel Iglesias S.A.
Pº Miramón, 170 · 20009 San Sebastián · SPAIN
Tél.: +34 943 44 88 00 · Fax: +34 943 44 88 20
[email protected] · www.ikusi.com