MA1010-EA

Operation Guide 3230/3232

About This Manual
x Depending on the model of your watch, display text appears either as dark figures
on a light background or light figures on a dark background. All sample displays in
this manual are shown using dark figures on a light background.
x Button operations are indicated using the letters shown in the illustration.

[Module 3230] [Module 3232]

E-1

Contents Procedure Lookup

The following is a handy reference list of all the operational procedures contained in
General Guide .......................................................................................................... E-4 this manual.
Timekeeping............................................................................................................. E-6 To set the time and date ......................................................................................... E-6
Alarm ...................................................................................................................... E-10 To switch the backlight function on and off ......................................................... E-9
Countdown Timer .................................................................................................. E-14 To set the alarm time............................................................................................. E-12
Stopwatch .............................................................................................................. E-17 To stop the alarm .................................................................................................. E-13
To switch an alarm and Hourly Time Signal on and off ..................................... E-13
Specifications ........................................................................................................ E-19
To set the countdown time ................................................................................... E-14
To use the countdown timer................................................................................. E-15
To switch auto repeat timing on and off ............................................................. E-16
To measure elapsed time...................................................................................... E-17
To record split times ............................................................................................ E-18
To time first and second place finishes .............................................................. E-18

E-2 E-3

General Guide x Press C to change from mode to mode. After you perform an operation in any
mode, pressing C returns to the Timekeeping.
x All of the illustrations in this manual show Module 3230. x Press D in any mode to illuminate the display. Illumination turns off about two
seconds after you release D.

Timekeeping Alarm Countdown Timer Stopwatch

Press C.

E-4 E-5

Timekeeping 4. While any other digits (besides seconds) are selected (flashing), press E to
increase the number. Holding down E changes the number at high speed.
Day of week
To set the time and date x To switch between the 12-hour and 24-hour formats, press D while some
1. Press A while in the Timekeeping Mode. The seconds digits are flashing.
Month digits flash on the display because they are selected. 5. After you set the time and date, press A to return to the Timekeeping Mode.
2. Press C to change the selection in the following x The day of the week is automatically set in accordance with the date.
Day sequence. x The date can be set within the range of January 1, 2000 to December 31, 2099.
x If you do not operate any button for a few minutes while a selection is flashing, the
Seconds Hour Minutes flashing stops and the watch goes back to the Timekeeping Mode automatically.

Day Month Year

3. While the seconds digits are selected (flashing), press

E to reset the seconds to “00”. If you press E while the
PM indicator seconds count is in the range of 30 to 59, the seconds
are reset to “00” and 1 is added to the minutes. If the
Hour : Minutes Seconds seconds count is in the range of 00 to 29, the minutes
count is unchanged.
E-6 E-7

About the backlight To switch the backlight function on and off

When you switch the backlight function on, the backlight of the watch flashes In the Timekeeping Mode, hold down E for about two seconds to switch the backlight
whenever alarm (page E-10), countdown timer or hourly time signal is sounding. function on and off. When you switch the backlight function on, an indicator appears
x Pressing D in any mode illuminates the display, regardless of the backlight’s on/ on the display as shown.
off setting.
Backlight function on indicator
x The backlight of this watch employs an electro-luminescent (EL) light, which loses its
illuminating power after very long term use.
x Frequent use of the backlight shortens the battery life.
x The watch will emit an audible sound whenever the display is illuminated. This is
caused by a transistor that vibrates when the EL panel lights up. It does not indicate
malfunction of the watch. x The backlight function indicator remains on the display in all modes until you switch
x The illumination provided by the backlight may be hard to see when viewed under the backlight function off.
direct sunlight. x The above operation controls operation of the backlight function only. It does not
x The backlight automatically stops illuminating whenever an alarm sounds. affect operation of audible tones and signals.

E-8 E-9
 Operation Guide 3230/3232
Alarm x To set a date alarm
Set the month, day, hour and minutes for the alarm time. This type of setting causes
Alarm on indicator You can set an alarm with hour, minutes, month, and day. the alarm to sound at the specific time, on the specific date you set.
When the alarm is on, the alarm sounds for 20 seconds
Mode indicator at the preset time. When the Hourly Time Signal is on, the x To set a 1-month alarm
watch beeps every hour on the hour. Set the month, hour and minutes for the alarm time. Set “– –” for the day (see step 3
Month
under “To set the alarm time”). This type of setting causes the alarm to sound every
Day day at the time you set, only during the month you set.
Alarm Types
The types of alarm you get depends on the information x To set a monthly alarm
you set. Set the day, hour and minutes for the alarm time. Set “–” for the month (see step 3
under “To set the alarm time”). This type of setting causes the alarm to sound every
x To set a daily alarm month at the time you set, on the day you set.
Set the hour and minutes for the alarm time. Set “–” for the
month and “– –” for the day (see step 3 under “To set the
alarm time”). This type of setting causes the alarm to sound
every day at the time you set.
Hour : Minutes
Hourly time signal on
indicator
E-10 E-11

To set the alarm time To stop the alarm

1. Press A while in the Alarm Mode until the hour digits start to flash on the display. Press any button to stop the alarm after it starts to sound.
The hour digits flash because they are selected.
x At this time the alarm is automatically switched on. To switch an alarm and Hourly Time Signal on and off
2. Press C to change the selection in the following sequence. Press E while in the Alarm Mode to change the status of an alarm (see “Alarm
Types” on page E-10) and Hourly Time Signal in the following sequence.
Hour Minutes Month Day
Hourly Time
Both ON Both OFF Alarm Only Signal only
3. Press E to increase the selected digits. Holding down E changes the number at
high speed.
x The format (12-hour and 24-hour) of the alarm time matches the format you select Alarm on indicator
for normal timekeeping.
x When setting the alarm time using the 12-hour format, take care to set the time
correctly as morning or afternoon.
4. After you set the alarm time, press A to return to the Alarm Mode. Hourly time signal on indicator
x If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Alarm Mode automatically.
E-12 E-13

Countdown Timer 4. After you set the countdown time, press A to return to the Countdown Timer
Mode.
Mode indicator The countdown timer can be set within a range of 1 second x If you do not operate any button for a few minutes while a selection is flashing,
to 24 hours. When the countdown reaches zero, an alarm the flashing stops and the watch goes back to the Countdown Timer Mode
Current time automatically.
sounds for 10 seconds or until you press any button.

To set the countdown time To use the countdown timer

1. Press A while in the Countdown Timer Mode. The 1. Press E while in the Countdown Timer Mode to start the countdown timer.
hours digit flashes on the display because it is selected. 2. Press E again to stop the countdown timer.
2. Press C to change the selection in the following x You can continue countdown timer operation by pressing E.
sequence. 3. Stop the timer and then press A until the countdown time is reset to its starting
value.
Hours Minutes Seconds x When the end of the countdown is reached and auto repeat timing is off, the alarm
Hours : Minutes Seconds sounds for 10 seconds or until you stop the alarm by pressing any button.
Countdown timing stops, and the countdown time is automatically reset to its starting
3. Press E to increase the selected number. Holding down E changes the number value after the alarm stops.
at high speed.
x To set the starting value of the countdown time to 24 hours, set 0:00'00.
E-14 E-15

To switch auto repeat timing on and off Stopwatch

1. Press A while in the Countdown Timer Mode. The
hours digit flashes on the display because it is selected. Mode indicator The Stopwatch Mode lets you measure elapsed time, split
2. Press D to switch auto repeat on and off. Current time
times, and two finishes. The range of the stopwatch is
3. Press A to return to the Countdown Timer Mode. 23 hours, 59 minutes, 59 seconds.
x When the end of the countdown is reached while
auto repeat is on, the alarm sounds, but the starting To measure elapsed time
countdown time is reset and countdown timing starts 1. Press E to start the stopwatch.
again automatically whenever the countdown reaches 2. Press E to stop the stopwatch.
Auto repeat on indicator zero. You can stop timing by pressing E, and manually x You can resume the measurement operation by
reset to the starting countdown time by pressing A. pressing E again.
3. Press B to clear the stopwatch to all zeros.
x For the first 60 minutes, the display shows minutes,
Seconds seconds, and 1/100 second. After 60 minutes, the display
Minutes 1/100 second format changes to show hours, minutes, and seconds.

E-16 E-17

To record split times Specifications

1. Press E to start the stopwatch.
2. Press B to display the timing up to that point. Stopwatch timing continues Accuracy at normal temperature: ±15 seconds a month
internally. Timekeeping: Hour, minutes, seconds, pm (P), month, day, the day of the week
3. Press B to clear the split time and to continue time measurement on the display. Time system: Switchable between 12-hour and 24-hour formats
x You can repeat steps 2 and 3 as many times as you want. Calendar system: Auto-calendar pre-programmed from the year 2000 to 2099
4. Press E to stop the time measurement.
Alarm: Multi-function alarm, hourly time signal
5. Press B to clear the stopwatch to all zeros.
Countdown Timer
To time first and second place finishes Measuring unit: 1 second
1. Press E to start the stopwatch. Input range: from 1 second to 24 hours
2. Press B when the first finisher crosses the line, and record the time. Other: Auto-repeat function
3. Press E when the second finisher crosses the line. Stopwatch
4. Press B to display the finishing time of the second finisher. Measuring units: 1/100 second (for the first 60 minutes)
5. Press B again to clear the stopwatch to all zeros. 1 second (after 60 minutes)
Measuring capacity: 23 hours, 59 minutes, 59 seconds
Measuring modes: Elapsed time, split time and two finishes
Illumination: EL (electro-luminescent) backlight
E-18 E-19
 Operation Guide 3230/3232
Battery: One lithium battery (Type: CR2016)
Approximately 2 years on type CR2016 (assuming backlight operation
3.5 sec./day and alarm operation 20 sec./day)

Note: Frequent use of the backlight shortens the battery life noted above.

E-20