Scribd
Upload
30 views1 page

QW-483 (Back) : ASME BPVC - IX-2019

Uploaded by

Balkishan Dyavanapelly
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
30 views1 page

QW-483 (Back) : ASME BPVC - IX-2019

Uploaded by

Balkishan Dyavanapelly
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

ASME BPVC.

IX-2019

FORM QW-483 (Back)

Tensile Test (QW-150) PQR No.

Ultimate Type of
Specimen Ultimate Unit Stress, Failure and
No. Width Thickness Area Total Load (psi or MPa) Location

Alternative Tension Specimen Specification (QW-462)

Guided-Bend Tests (QW-160)

Type and Figure No. Result

Toughness Tests (QW-170)

Specimen Notch Specimen Test Toughness Values


No. Location Size Temperature ft-lb or J % Shear Mils (in.) or mm Drop Weight Break (Y/N)

Comments

Fillet-Weld Test (QW-180)

Result — Satisfactory: Yes No Penetration into Parent Metal: Yes No

Macro — Results

Other Tests
Type of Test
Deposit Analysis
Other

Welder’s Name Clock No. Stamp No.


Tests Conducted by Laboratory Test No.
We certify that the statements in this record are correct and that the test welds were prepared, welded, and tested in accordance with the
requirements of Section IX of the ASME Boiler and Pressure Vessel Code.

Organization

Date Certified by
(Detail of record of tests are illustrative only and may be modified to conform to the type and number of tests required by the Code.)
(07/19)
--`,``,``,,`,`,,````,`,``,,,`-`-`,,`,,`,`,,`---

327
Copyright ASME International (BPVC)

You might also like