Scribd Logo
Upload

Welcome to Scribd!

  • 44 views

    Quantity Take-Off List: Index Replacement of Main Electrical Switchgear Plant

    Uploaded by

    Tahir Mubeen
    This document is a quantity take-off list for materials needed for replacing a main electrical switchgear. It includes quantities of items like concrete, rebar, bolts, and coatings. There are 11 items listed with descriptions, units of measurement, quantities, and unit prices. The total cost of the materials will be calculated based on the quantities and unit prices provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Quantity Take-Off List: Index Replacement of Main Electrical Switchgear Plant

    Uploaded by

    Tahir Mubeen
    44 views1 page
    This document is a quantity take-off list for materials needed for replacing a main electrical switchgear. It includes quantities of items like concrete, rebar, bolts, and coatings. There are 11 items listed with descriptions, units of measurement, quantities, and unit prices. The total cost of the materials will be calculated based on the quantities and unit prices provided.

    Original Title

    TO-634549

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a quantity take-off list for materials needed for replacing a main electrical switchgear. It includes quantities of items like concrete, rebar, bolts, and coatings. There are 11 items listed with descriptions, units of measurement, quantities, and unit prices. The total cost of the materials will be calculated based on the quantities and unit prices provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    44 views1 page

    Quantity Take-Off List: Index Replacement of Main Electrical Switchgear Plant

    Uploaded by

    Tahir Mubeen
    This document is a quantity take-off list for materials needed for replacing a main electrical switchgear. It includes quantities of items like concrete, rebar, bolts, and coatings. There are 11 items listed with descriptions, units of measurement, quantities, and unit prices. The total cost of the materials will be calculated based on the quantities and unit prices provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    QUANTITY TAKE-OFF LIST

    S. TOTAL
    UNIT PRICE
    NO. QUANTITY UOM PRICE ITEM DESCRIPTION
    (SAR)
    (SAR)

    CONCRETE: READY MIX, FC' = 4000 PSI (28 MPA) COMPRESSIVE


    1 48.00 Cu.M
    STRENGTH, PER 09-SAMSS-097.

    2 1.50 Cu.M CONCRETE, LEAN, 2000 PSI

    3 1,265.00 EA CONCRETE BLOCK: FULL WALL 200 MM X 200 MM X 400 MM


    COATING: ANTI-CORROSIVE, FOR BURIED & IMMERSED STEEL NOT
    EXPOSED TO DIRECT SUNLIGHT SERVICE, BITUMINOUS MASTIC, APCS-
    4 64.50 Sq.M
    10, BLACK, LIQUID, 60 DEG C (140 DEG F), 20 L (5.3 GAL) CAN, 09-SAMSS-
    060
    5 55.50 Sq.M FILM:POLYETHYLENE,0.006 INCH THK,30 FT WD X 100 FT/ROLL

    WIRE: TIE, NO 16 GA, 254 MM (10 IN) LG, COATED COLD DRAWN CS ASTM
    A82, 6 MM (0.25 IN) DIA LOOP AT EACH END LOOP TO BE TWIST
    6 14.60 ROLL FASTENED TO RUN OF WIRE, COATED WITH EITHER EPOXY OR PLASTIC,
    USED FOR FUSION BONDED EPOXY (FBE) COATED CONCRETE
    REINFORCING BARS 1000 WIRE/ROLL

    BAR, REINFORCING, COATED: CONCRETE, 10 MM DIA, STEEL, HOT


    ROLLED, DEFORMED, FUSION BOND EPOXY COATED, 414 MPA (60 KSI)
    YIELD STRENGTH, 0.79 SQ CM, 0.622 KG/M, 11.5-12 M LG, SSA 2/1399H, 09-
    SAMSS-106, ROUND, MEDIUM TENSILE GRADE, SHIPPED IN
    7 964.00 M ACCORDANCE TO ARAMCO BUNDLE PACKING SPEC SHIPPED IN
    ACCORDANCE WITH SAUDI ARAMCO BUNDLE PACKING SPECIFICATION
    EXCEPT ALL BUNDLES ARE TO BE BANDED WITH NYLON WEBBING ONLY
    AND ALL SLINGS UTILIZED FOR HANDLING ARE TO BE NON-METAL TO
    AVOID DAMAGE TO THE EPOXY COATING

    BAR, REINFORCING, COATED: CONCRETE, 12 MM DIA, STEEL, HOT


    ROLLED, DEFORMED, FUSION BOND EPOXY COATED, 414 MPA (60 KSI)
    YIELD STRENGTH, 1.13 SQ CM, 0.897 KG/M, 11.5-12 M LG, SSA 2/1399H, 09-
    SAMSS-106, ROUND, MEDIUM TENSILE GRADE, SHIPPED IN
    8 3,547.00 M ACCORDANCE TO ARAMCO BUNDLE PACKING SPEC SHIPPED IN
    ACCORDANCE WITH SAUDI ARAMCO BUNDLE PACKING SPECIFICATION
    EXCEPT ALL BUNDLES ARE TO BE BANDED WITH NYLON WEBBING ONLY
    AND ALL SLINGS UTILIZED FOR HANDLING ARE TO BE NON-METAL TO
    AVOID DAMAGE TO THE EPOXY COATING

    BAR, REINFORCING, COATED: CONCRETE, 16 MM DIA, STEEL, HOT


    ROLLED, DEFORMED, FUSION BOND EPOXY COATED, 414 MPA (60 KSI)
    YIELD STRENGTH, 2.01 SQ CM, 1.596 KG/M, 11.5-12 M LG, SSA 2/1399H, 09-
    SAMSS-106, ROUND, MEDIUM TENSILE GRADE, SHIPPED IN
    9 1,114.00 M ACCORDANCE TO ARAMCO BUNDLE PACKING SPEC SHIPPED IN
    ACCORDANCE WITH SAUDI ARAMCO BUNDLE PACKING SPECIFICATION
    EXCEPT ALL BUNDLES ARE TO BE BANDED WITH NYLON WEBBING ONLY
    AND ALL SLINGS UTILIZED FOR HANDLING ARE TO BE NON-METAL TO
    AVOID DAMAGE TO THE EPOXY COATING

    10 36.00 Cu.M EXCAVATION

    11 23.00 Cu.M SELECT FILL (BACKFILL)

    BOLT ASSEMBLY, ANCHOR:STRAIGHT, 20 MM DIA X 350 MM LGTH, STEEL,


    12 16.00 EA
    ASTM A36/A36M TYPE 2 PER STD DRAWING AA-036322

    COMPILED REFERENCE DRAWINGS


    DATE CHECKED DATE PROJ.ENGR DATE
    BY: RA-634549.001, RA-634550.001
    RA-634551.001, RA-634552.001 TO 003
    WAPECC 11/04/18 WAPECC 11/04/18 RA-634553.001
    EWO J.O. PHASE ENG ITEM AREA START-UP DATE PRELIMINARY -
    15C059A IFC FINAL Y
    MATERIAL FOR: EWO-17C059A FOUNDATIONS
    INDEX Q
    ELECTRICAL ROOM
    REPLACEMENT OF MAIN ELECTRICAL SWITCHGEAR
    DOCUMENT NO. SHEET REV.
    PLANT N07
    RAS TANURA SAUDI ARABIA TO-634549 001 00

    You might also like