Electromechanical Relays

Selection Guide
Latching Non-Latching

JAN
Commercial

RF

Surface-Mount
Established
Reliability Environmental

Attenuated
Switching Solutions
Teledyne Relays has been the world’s innovative leader Product Assurance
in manufacturing ultraminiature, hermetically sealed, Under an aggressive Total Quality Management (TQM)
electromechanical and solid-state switching products program, Teledyne Relays has embraced a “continuous
for more than 40 years. The company’s comprehensive improvement” culture. With recognized certifications such
product line meets a wide range of requirements for as AS/EN/JISQ 9100 - Revision B and ISO 9001:9002,
defense and aerospace, industrial, commercial, medical DSCC MIL-STD-790 and Boeing D6-82479 Appendix
and RF & wireless uses. A, Teledyne Relays has become a primary supplier of
Business Focus switching solutions with the highest quality and reliability
• MIL QPL & COTS Solid-State Relays to industry leaders around the world.
• MIL QPL & COTS Electromechanical Relays
• HiRel (Space) Electromechanical Relays Technical Service & Customer Support
• RF & Microwave Relays & Coaxial Switches Teledyne Relays provides easy access to technical
• Industrial Solid-State Relays service and customer support. Our websites make it easy
• Switching Matrices to find technical information, buy products and even get
Markets e-mail responses within 24 hours. Switching solutions
• Commercial & Military Aviation are only a mouse click away at www.teledynerelays.com
• Defense & Aerospace or at teledyne-europe.com. Information about coax
• Telecom/Communications (Wireless) switches is available at www.teledynecoax.com. An
• Instrumentation & Test online search function helps engineers locate specific
• Industrial Power & Motion Control solid-state relays, electromechanical relays and coaxial
• Medical Applications switches quickly by selecting parameters via drop-down

Teledyne Relays offer superior signal integrity

up to 12 Gbps. See the RF relays section in our
Parametric Search — The Teledyne Relays website allows
website.
engineers to use drop-down menus to select relays and
switches based on various parameters.

(800) 284-7007 • www.teledynerelays.com ♦ +44 (0) 1236 453124 • www.teledyne-europe.com © 2008 Teledyne Relays
 RF
SWITCHING
SOLUTIONS

CCR-59 and CCR-33K Coaxial Switches GRF312 Surface-Mount Relays

• DC to 33 GHz • DC to 8GHz
• Excellent insertion loss repeatability • Signal Integrity measured to 12 Gbps
• Ultra low passive intermodulation (PIM) • Excellent pole-to-pole Isolation
• 5 million cycles characteristic life • Pick-and-place surface mount solution
• Failsafe and latching • Hermetically sealed - immune to cleaning solutions

(800) 351-7368 • www.teledynecoax.com (800) 596-3855 • www.teledynerelays.com

© 2008 Teledyne Relays SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 1

 RF Relays Selection Matrix
Nominal Coil Frequency
Isolation
Pole to Across Insertion
Series Voltage Resistance Max Range VSWR
Pole Contacts Loss (dB)
(Vdc) (Ω) (GHz) (GHz)
(dB) (dB)
5 50 DC-1 1.1 : 1 40 30 0.1
RF100
12 390 1-2 1.2 : 1 35 25 0.3
3
5 100
RF103 2-3 1.5 : 1 33 22 0.5
12 800
5 50 DC-1 1.1 : 1 50 34 0.2
GRF100 1-2 1.1 : 1 45 27 0.2
12 390
2-3 1.1 : 1 55 27 0.3
6
5 100 3-4 1.2 : 1 38 28 0.4
GRF103 4-5 1.5 : 1 40 26 0.7
12 800
D 5-6 1.8 : 1 38 24 1.1
P
D
5 50 DC-1 1.1 : 1 35 35 0.2
T SGRF100 1-2 1.2 : 1 30 30 0.3
12 390
N
2-3 1.2 : 1 29 29 0.5
6
O 5 100 3-4 1.3 : 1 28 27 0.7
N
L SGRF103 4-5 1.6 : 1 27 25 0.9
12 800
A 5-6 1.7 : 1 25 25 1.0
T
C 5 64 DC-1 1.1 : 1 50 35 0.1
H GRF172 12 400 2.5 1-2 1.2 : 1 43 27 0.2
I
N 26.5 1600 2-3 1.1 : 1 50 25 0.2
G 5 50 DC-1 1.1 : 1 38 30 0.1
RF300
12 390 1-2 1.1 : 1 30 24 0.2
3
5 100
RF303 2-3 1.2 : 1 25 22 0.3
12 850
5 50 DC-1 1.1 : 1 46 32 0.1
GRF300 1-2 1.1 : 1 42 30 0.2
12 390
2-3 1.1 : 1 40 30 0.2
6
5 100 3-4 1.2 : 1 38 30 0.4
GRF303 4-5 1.3 : 1 35 28 0.8
12 850
5-6 1.4 : 1 30 25 0.9

GRF100 SGRF103 GRF172 GRF300

Page 2 (800) 284-7007 • www.teledynerelays.com ♦ +44 (0) 1236 453124 • www.teledyne-europe.com © 2008 Teledyne Relays
 RF Relays Selection Matrix
Nominal Coil Frequency Isolation
Pole to Across Insertion
Series Voltage Resistance Max Range VSWR
Pole Contacts Loss (dB)
(Vdc) (Ω) (GHz) (GHz)
(dB) (dB)
5 50 DC-1 1.1 : 1 43 33 0.2
SGRF300 1-2 1.1 : 1 40 38 0.2
12 390
2-3 1.1 : 1 45 35 0.3
6
5 100 3-4 1.1 : 1 28 44 0.6
SGRF303 4-5 1.1 : 1 23 35 0.7
12 850
5-6 1.4 : 1 18 32 0.8
D
P DC-1 1.1 : 1 45 30 0.1
D 1-2 1.1 : 1 35 24 0.2
T 5 50
2-3 1.1 : 1 30 22 0.3
N 3-4 1.1 : 1 38 27 0.4
O RF312 8
N 4-5 1.1 : 1 26 32 0.5
L 5-6 1.1 : 1 25 40 0.6
A 12 390
T 6-7 1.2 : 1 23 25 0.7
C 7-8 1.3 : 1 22 24 0.8
H
I DC-1 1.1 : 1 70 40 0.1
N 1-2 1.1 : 1 65 32 0.2
G 5 50
2-3 1.1 : 1 50 34 0.3
3-4 1.1 : 1 35 38 0.4
GRF312 8
4-5 1.1 : 1 35 42 0.6
5-6 1.2 : 1 38 33 0.4
12 390
6-7 1.4 : 1 40 28 0.7
7-8 1.8 : 1 42 28 1.3
S 5 63 DC-1 1.1 : 1 38 0.1
P
D 12 500 1-2 1.2 : 1 32 0.2
T RF311
2-3 1.4 : 1 27 0.3
26.5 2000
N 3-4 1.5 : 1 23 0.3
O 8
N 5 125 4-5 1.3 : 1 20 0.4
L
A 12 1025 5-6 1.4 : 1 20 0.5
T
RF331
6-7 1.6 : 1 17 0.7
C 26.5 4000
H 7-8 1.5 : 1 17 0.8

GRF312 SGRF303

© 2008 Teledyne Relays SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 3

 RF Relays Selection Matrix
Nominal Coil Frequency Isolation
Pole to Across Insertion
Series Voltage Resistance Max Range VSWR
Pole Contacts Loss (dB)
(Vdc) (Ω) (GHz) (GHz)
(dB) (dB)
S DC-1 1.1 : 1 42 0.1
P 5 63
D 1-2 1.2 : 1 32 0.2
T
2-3 1.3 : 1 27 0.3
N 12 500 3-4 1.4 : 1 27 0.4
O GRF311 8
N 4-5 1.4 : 1 26 0.5
L
A 5-6 1.4 : 1 23 0.7
T 26.5 2000 6-7 1.5 : 1 19 1.0
C
H 7-8 1.5 : 1 19 1.2
DC-1 1.1 : 1 55 40 0.1
5 61
1-2 1.1 : 1 52 35 0.2
2-3 1.2 : 1 50 30 0.3
RF180 12 500 6
3-4 1.2 : 1 45 29 0.3
4-5 1.4 : 1 32 28 0.7
D 26.5 2000
P 5-6 2.2 : 1 30 26 1.2
D DC-1 1.1 : 1 55 45 0.1
T 5 61
1-2 1.1 : 1 50 36 0.1
L 2-3 1.2 : 1 40 35 0.2
A GRF180 12 500 6
T 3-4 1.2 : 1 35 31 0.4
C 4-5 1.5 : 1 30 30 0.8
H 26.5 2000
I 5-6 2.1 : 1 25 29 1.3
N DC-1 1.1 : 1 50 35 0.2
G
5 61 1-2 1.1 : 1 43 35 0.2
2-3 1.2 : 1 35 34 0.3
GRF342 6
3-4 1.1 : 1 30 30 0.4
12 500 4-5 1.1 : 1 28 29 0.5
5-6 1.4 : 1 27 27 0.7
S DC-1 1.1 : 1 40 0.2
P 5 61
D 1-2 1.1 : 1 35 0.3
T
2-3 1.1 : 1 30 0.5
L RF341 12 500 6
A
3-4 1.1 : 1 27 0.6
T 4-5 1.2 : 1 25 0.8
C 26.5 2000
H 5-6 1.3 : 1 24 1.5

GRF311 GRF180 GRF342

Page 4 (800) 284-7007 • www.teledynerelays.com ♦ +44 (0) 1236 453124 • www.teledyne-europe.com © 2008 Teledyne Relays
 RF Relays Selection Matrix
Insertion
Nominal Coil Frequency VSWR Isolation
Loss
Series Pole to Across
Voltage Resistance Max Range N.O N.C
N.O N.C Pole Contacts
(Vdc) (Ω) (GHz) (GHz) (dB) (dB)
(dB) (dB)
5 50 DC-1 1.1 : 1 1.2 : 1 35 27 0.1 0.2
RF310 3 1-2 1.1 : 1 1.1 : 1 30 24 0.2 0.3
12 390
2-3 1.3 : 1 1.1 : 1 21 22 0.3 0.4
5 100 DC-1 1.1 : 1 1.1 : 1 35 27 0.1 0.2
B RF313 3 1-2 1.1 : 1 1.2 : 1 30 24 0.2 0.3
Y 12 850
P 2-3 1.3 : 1 1.1 : 1 21 22 0.3 0.3
A 5 50 DC-1 1.2 : 1 1.1 : 1 33 27 0.2 0.1
S
S RF320 3 1-2 1.3 : 1 1.1 : 1 28 23 0.4 0.1
12 390
2-3 1.3 : 1 1.3 : 1 26 20 0.5 0.3
5 100 DC-1 1.2 : 1 1.1 : 1 33 27 0.3 0.1
RF323 3 1-2 1.3 : 1 1.1 : 1 28 23 0.4 0.2
12 850
2-3 1.2 : 1 1.3 : 1 26 20 0.5 0.3

Insertion
Nominal Coil Frequency VSWR
Loss (dB)
Series
Voltage Resistance Max Range Attenuated Path Through Path
Typ. Max.
(Vdc) (Ω) (GHz) (GHz) Typ. Max. Typ. Max.
5 50 DC-1 1.20 : 1 1.25 : 1 1.10 : 1 1.20 : 1 0.1 0.25
A
T 12 390 1-2 1.30 : 1 1.35 : 1 1.20 : 1 1.25 : 1 0.2 0.35
T
A150 3
15 610
E 2-3 1.40 : 1 1.45 : 1 1.25 : 1 1.30 : 1 0.3 0.55
N 26.5 1560
U 5 50 DC-1 1.20 : 1 1.25 : 1 1.10 : 1 1.20 : 1 0.1 0.25
A
T 12 390 1-2 1.30 : 1 1.35 : 1 1.20 : 1 1.25 : 1 0.2 0.35
O A152 5
15 610 2-3 1.40 : 1 1.45 : 1 1.25 : 1 1.30 : 1 0.3 0.55
R
26.5 1560 3-5 See Datasheet

RF310 RF320 A150

© 2008 Teledyne Relays SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 5

 Established Reliability T²R Relays Selection Matrix
Nominal Nominal Coil Typical
Series Voltage Resistance Operating
(Vdc) (Ω) Power (mW)
5, 6, 9, 50, 98, 220,
ER114 450
12, 18, 26.5 390, 880, 1560
5, 6, 9, 50, 98, 220,
ER114D 450
ER114 12, 18, 26.5 390, 880, 1560
5, 6, 9, 39, 78, 220,
ER114DD 450
12, 18, 26.5 390, 880, 1560
DPDT - Non-Latching

5, 6, 9, 39, 78, 220,

ER116C 450
12, 18, 26.5 390, 880, 1560
5, 6, 9, 100, 200, 400,
ER134 200
12, 18, 26.5 800, 1600, 3200
5, 6, 9, 100, 200, 400,
ER134D 200
12, 18, 26.5 800, 1600, 3200
5, 6, 9, 64, 125, 400,
ER134DD 200
ER134 12, 18, 26.5 800, 1600, 3200
5, 6, 9, 100, 200, 400
ER136C 200
12, 18, 26.5 800, 1600, 3200
5, 6, 9, 63, 125, 280,
ER411 300
12, 18, 26.5 500, 1130, 2000
SPDT - Non-Latching

5, 6, 9, 63, 125, 280,

ER411D 300
12, 18, 26.5 500, 1130, 2000
5, 6, 9, 50, 98, 280,
ER411DD 300
12, 18, 26.5 500, 1130, 2000
5, 6, 9, 63, 125, 280,
ER411T 300
12, 18, 26.5 500, 1130, 2000
5, 6, 9, 50, 98, 220,
ER412 450
12, 18, 26.5 390, 880, 1560
DPDT - Non-Latching

ER411D
5, 6, 9, 50, 98, 220,
ER412D 450
12, 18, 26.5 390, 880, 1560
5, 6, 9, 39, 78, 220,
ER412DD 450
12, 18, 26.5 390, 880, 1560
5, 6, 9, 50, 98, 220,
ER412T 450
12, 18, 26.5 390, 880, 1560

ER412

Page 6 (800) 284-7007 • www.teledynerelays.com ♦ +44 (0) 1236 453124 • www.teledyne-europe.com © 2008 Teledyne Relays
 Established Reliability T²R Relays Selection Matrix
Nominal Nominal Coil Typical
Series Voltage Resistance Operating
(Vdc) (Ω) Power (mW)
5, 6, 9, 61, 120, 280,
ER421 290
SPDT - Latching

12, 18, 26.5 500, 1130, 2000

5, 6, 9, 61, 120, 280,
ER421D 290 ER420
12, 18, 26.5 500, 1130, 2000
5, 6, 9, 48, 97, 280,
ER421DD 290
12, 18, 26.5 500, 1130, 2000
5, 6, 9, 61, 120, 280,
ER420 290
12, 18, 26.5 500, 1130, 2000
5, 6, 9, 61, 120, 280,
ER420D 290
12, 18, 26.5 500, 1130, 2000
DPDT - Latching

5, 6, 9, 48, 97, 280,

ER420DD 290
12, 18, 26.5 500, 1130, 2000
5, 6, 9, 61, 120, 280,
ER422 290
12, 18, 26.5 500, 1130, 2000
5, 6, 9, 61, 120, 280,
ER422D 290
12, 18, 26.5 500, 1130, 2000
5, 6, 9, 48, 97, 280,
ER422DD 290
12, 18, 26.5 500, 1130, 2000
ER422
5, 6, 9, 12, 125, 255, 630,
ER431 150
18, 26.5 1025, 2300, 4000
SPDT - Non-Latching

5, 6, 9, 12, 125, 255, 630,

ER431D 150
18, 26.5 1025, 2300, 4000
5, 6, 9, 12, 100, 200, 630,
ER431DD 150
18, 26.5 1025, 2300, 4000
5, 6, 9, 12, 125, 255, 630,
ER431T 150
18, 26.5 1025, 2300, 4000
5, 6, 9, 12, 100, 200, 400,
ER432 200
18, 26.5 850, 1600, 3300
DPDT - Non-Latching

5, 6, 9, 12, 100, 200, 400,

ER432D 200
18, 26.5 850, 1600, 3300
5, 6, 9, 12, 64, 125, 400,
ER432DD 200
18, 26.5 850, 1600, 3300
5, 6, 9, 12, 100, 200, 400,
ER432T 200
18, 26.5 850, 1600, 3300 ER431D

DPDT = Double-Pole, Double-Throw ER = Teledyne Relays Established Reliability T²R Program

SPDT = Single-Pole, Double-Throw see Appendix B for more details.

© 2008 Teledyne Relays SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 7

 Military Qualified (JAN) Relays Selection Matrix
Nominal Nominal Coil Typical
QPL
Series Voltage Resistance Operating
Number
(Vdc) (Ω) Power (mW)
5, 6, 9, 50, 98, 220,
J114 M39016/17 450
J114 12, 18, 26.5 390, 880, 1560
5, 6, 9, 50, 98, 220,
J114D M39016/18 450
12, 18, 26.5 390, 880, 1560
5, 6, 9, 39, 78, 220,
J114DD M39016/19 450
12, 18, 26.5 390, 880, 1560
DPDT - Non-Latching

5, 6, 9, 39, 78, 220,

J116C M28776/6 450
12, 18, 26.5 390, 880, 1560
5, 6, 9, 100, 200, 400,
J134 M39016/41 200
12, 18, 26.5 800, 1600, 3200
5, 6, 9, 100, 200, 400,
J134D M39016/42 200
12, 18, 26.5 800, 1600, 3200
5, 6, 9, 64, 125, 400,
J134 J134DD M39016/43 200
12, 18, 26.5 800, 1600, 3200
5, 6, 9, 100, 200, 400
J136C M28776/7 200
12, 18, 26.5 800, 1600, 3200
5, 6, 9, 63, 125, 280,
J411 M39016/7 300
12, 18, 26.5 500, 1130, 2000
SPDT - Non-Latching

5, 6, 9, 63, 125, 280,

J411D M39016/23 300
12, 18, 26.5 500, 1130, 2000
5, 6, 9, 50, 98, 280,
J411DD M39016/24 300
12, 18, 26.5 500, 1130, 2000
5, 6, 9, 63, 125, 280,
J411T M28776/5 300
12, 18, 26.5 500, 1130, 2000
J412D
5, 6, 9, 50, 98, 220,
J412 M39016/9 450
12, 18, 26.5 390, 880, 1560
5, 6, 9, 50, 98, 220,
J412D M39016/15 450
12, 18, 26.5 390, 880, 1560
DPDT - Non-Latching

5, 6, 9, 39, 78, 220,

J412DD M39016/20 450
12, 18, 26.5 390, 880, 1560
5, 6, 9, 50, 98, 220,
J412T M28776/1 450
12, 18, 26.5 390, 880, 1560

5, 6, 45, 63,
J255 M39016/45 550
12, 26.5 254, 1000
J255

Page 8 (800) 284-7007 • www.teledynerelays.com ♦ +44 (0) 1236 453124 • www.teledyne-europe.com © 2008 Teledyne Relays
 Military Qualified (JAN) Relays Selection Matrix
Nominal Nominal Coil Typical
QPL
Series Voltage Resistance Operating
Number
(Vdc) (Ω) Power (mW)
5, 6, 9, 61, 120, 280,
J421 M39016/8 290 J421
SPDT - Latching

12, 18, 26.5 500, 1130, 2000

5, 6, 9, 61, 120, 280,
J421D M39016/27 290
12, 18, 26.5 500, 1130, 2000
5, 6, 9, 48, 97, 280,
J421DD M39016/28 290
12, 18, 26.5 500, 1130, 2000
5, 6, 9, 61, 120, 280,
J420 M39016/12 290
12, 18, 26.5 500, 1130, 2000
5, 6, 9, 61, 120, 280,
J420D M39016/29 290
12, 18, 26.5 500, 1130, 2000
DPDT - Latching

5, 6, 9, 48, 97, 280,

J420DD M39016/30 290
12, 18, 26.5 500, 1130, 2000
5, 6, 9, 61, 120, 280,
J422 M39016/12 290
12, 18, 26.5 500, 1130, 2000
5, 6, 9, 61, 120, 280,
J422D M39016/29 290
12, 18, 26.5 500, 1130, 2000
5, 6, 9, 48, 97, 280,
J422DD M39016/30 290
12, 18, 26.5 500, 1130, 2000
5, 6, 9, 125, 255, 630,
J431 M39016/10 150 J422D
12, 18, 26.5 1025, 2300, 4000
SPDT - Non-Latching

5, 6, 9, 125, 255, 630,

J431D M39016/25 150
12, 18, 26.5 1025, 2300, 4000
5, 6, 9, 100, 200, 630,
J431DD M39016/26 150
12, 18, 26.5 1025, 2300, 4000
5, 6, 9, 125, 255, 630,
J431T M28776/4 150
12, 18, 26.5 1025, 2300, 4000
5, 6, 9, 100, 200, 400,
J432 M39016/11 200
12, 18, 26.5 850, 1600, 3300
DPDT - Non-Latching

5, 6, 9, 100, 200, 400,

J432D M39016/16 200
12, 18, 26.5 850, 1600, 3300
5, 6, 9, 64, 125, 400,
J432DD M39016/21 200
12, 18, 26.5 850, 1600, 3300
5, 6, 9, 100, 200, 400,
J432T M28776/3 200
12, 18, 26.5 850, 1600, 3300 J431

DPDT = Double-Pole, Double-Throw JAN = Teledyne Relays Military Qualified Relays

SPDT = Single-Pole, Double-Throw see Appendix B for more details.

© 2008 Teledyne Relays SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 9

 Commercial Relays Selection Matrix
Nominal Nominal Coil Typical
Series Voltage Resistance Operating
(Vdc) (Ω) Power (mW)
5, 6, 9, 50, 98, 220,
S172 S114 450
12, 18, 26.5 390, 880, 1560
5, 6, 9, 50, 98, 220,
S114D 450
12, 18, 26.5 390, 880, 1560
5, 6, 9, 39, 78, 220,
S114DD 450
12, 18, 26.5 390, 880, 1560
Non-Latching

5, 6, 9, 100, 200, 400,

S134 200
12, 18, 26.5 800, 1600, 3200
5, 6, 9, 100, 200, 400,
S134D 200
12, 18, 26.5 800, 1600, 3200
5, 6, 9, 64, 125, 400,
S134DD 200
12, 18, 26.5 800, 1600, 3200
S172 5, 12, 26.5 64, 400, 1600 390
S172D 5, 12, 26.5 64, 400, 1600 390
Latching

5, 6, 9, 48, 120, 280

122C 290
12, 18, 26.5 500, 1130, 2000
DPDT

172 5, 12, 26.5 64, 400, 1600 390

172 172D 5, 12, 26.5 64, 400, 1600 390
5, 6, 9, 50, 98, 220,
Non-Latching

712 450
12, 18, 26.5 390, 880, 1560
5, 6, 9, 50, 98, 220,
712D 450
12, 18, 26.5 390, 880, 1560
5, 6, 9, 50, 98, 220,
712TN 450
12, 18, 26.5 390, 880, 1560
5, 6, 9, 61, 120, 280,
722 290
Latching

12, 18, 26.5 500, 1130, 2000

5, 6, 9, 61, 120, 280,
722D 290
12, 18, 26.5 500, 1130, 2000
5, 6, 9, 100, 200, 400,
732 200
12, 18, 26.5 850, 1600, 3300
Non-Latching

5, 6, 9, 100, 200, 400,

732D 200
12, 18, 26.5 850, 1600, 3300
5, 6, 9, 100, 200, 400,
732TN 200
712 12, 18, 26.5 850, 1600, 3300

Page 10 (800) 284-7007 • www.teledynerelays.com ♦ +44 (0) 1236 453124 • www.teledyne-europe.com © 2008 Teledyne Relays
 Special Environmental Relays Selection Matrix
Nominal Nominal Coil Typical
Series Voltage Resistance Operating
(Vdc) (Ω) Power (mW)
5, 6, 9, 50, 98, 220,
412H 450
Non-Latching

12, 18, 26.5 390, 880, 1560

High Temperature

100, 200, 400,

5, 6, 9, 412H
432H 850, 1600, 200
12, 18, 26.5
3300
61, 120, 280,
5, 6, 9,
422H 500, 1130, 290
12, 18, 26.5
Latching

2000
61, 120, 280,
5, 6, 9,
422K 500, 1130, 290
High Shock

12, 18, 26.5

2000
DPDT

5, 6, 9, 50, 80, 160,

412K 500
12, 18, 26.5 300, 600, 1350
5, 6, 9, 50, 70, 155,
412V 620
12, 18, 26.5 235, 610, 1130
5, 6, 9, 33, 44, 125,
Non-Latching

412DV 620
12, 18, 26.5 215, 470, 1050
High Vibration

5, 6, 9, 33, 44, 125,

412DDV 620
12, 18, 26.5 215, 470, 1050 422H

5, 6, 9, 80, 120, 240,

432V 350
12, 18, 26.5 480, 950, 1900
5, 6, 9, 80, 120, 240,
432DV 350
12, 18, 26.5 480, 950, 1900

DPDT = Double-Pole, Double-Throw JAN = Teledyne Relays Military Qualified Relays

SPDT = Single-Pole, Double-Throw see Appendix B for more details.

432DV

© 2008 Teledyne Relays SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 11

 Teledyne Relays Part Numbering System

RF Attenuator Relays

A150 - 20 - 26 / S Q
Relay Series
Q = Solder-Coated Leads
G = Gold-Plated Leads (RoHS Compliant)
Attenuation Value (dB) * Parts ordered without Suffix may be received with
Solder-Coated or Gold-Plated leads.

S = 0.187” Leads
Nominal Coil Voltage No Suffix = 0.75” Leads
(26 = 26.5 V)

RF Relays

RF100 X - 26 / S Q
Relay Series Q = Solder-Coated Leads
G = Gold-Plated Leads (RoHS Compliant)
Ground Pin Option * Parts ordered without Suffix may be received with
(See Appendix A) Solder-Coated or Gold-Plated leads.
* Not Applicable for GRF Relays
S = 0.187” Leads
No Suffix = 0.75” Leads
* Not Applicable for GRF Relays

Nominal Coil Voltage

(26 = 26.5 V)

T2R Established Reliability Relays

ER 114 Y M4 - 26 A / S Q
Established Reliability Designator Q = Solder-Coated Leads
G = Gold-Plated Leads (RoHS Compliant)
Relay Series * Parts ordered without Suffix may be received with
Solder-Coated or Gold-Plated leads.
Ground Pin Option
(See Appendix A) S = 0.187” Leads
W = 1.5” Leads
Pad Option
No Suffix = 0.75” Leads
(See Appendix A)
Nominal Coil Voltage Screening and Reliability Level
(26 = 26.5 V) (See Appendix for Screening Options B)

Military Qualified (JAN) Relays

J 114 Z M4 - 26 P L
Military (JAN) Designator Screening and Reliability Level
(See Appendix for Screening Options B)
Relay Series
P = 0.187” Leads
Ground Pin Option
W = 1.5” Leads
(See Appendix A)
No Suffix = 0.75” Leads
Pad Option
(See Appendix A) Nominal Coil Voltage
(26 = 26.5 V)

Page 12 (800) 284-7007 • www.teledynerelays.com ♦ +44 (0) 1236 453124 • www.teledyne-europe.com © 2008 Teledyne Relays
 Teledyne Relays Part Numbering System

Commercial Surface Mount Relays

S114D - 26 / G
Q = Solder-Coated Leads
Relay Series G = Gold-Plated Leads (RoHS Compliant)
* Surface Mount Relays are Solder-Coated by default

Nominal Coil Voltage

(26 = 26.5 V)

Commercial Relays

172 X M4 - 26 / S Q
Q = Solder-Coated Leads
Relay Series G = Gold-Plated Leads (RoHS Compliant)
* Parts ordered without Suffix may be received with
Ground Pin Option Solder-Coated or Gold-Plated leads.
(See Appendix A)
S = 0.187” Leads
Pad Option No Suffix = 0.75” Leads
(See Appendix A)
Nominal Coil Voltage
(26 = 26.5 V)

Special Environmental / HI-REL Relays

412DV X M - 26 / S G
Relay Series Q = Solder-Coated Leads
G = Gold-Plated Leads (RoHS Compliant)
Ground Pin Option * Parts ordered without Suffix may be received with
(See Appendix A) Solder-Coated or Gold-Plated leads.

S = 0.187” Leads
Pad Option W = 1.5” Leads
(See Appendix A) No Suffix = 0.75” Leads
Nominal Coil Voltage
(26 = 26.5 V)

If you don’t see what you’re looking for

in this Selection Guide, contact us!
© 2008 Teledyne Relays SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 13
 CERTIFICATE OF COMPLIANCE
It is Hereby Stated and Certified
That the Company (TELEDYNE RELAYS) complies with the
Restrictions on Hazardous Substances (RoHS) Directives
to the extent stated herein:

Teledyne Relays does not use any of the Restricted Substances specified by
the RoHS Directives (listed below) as components in TO-5 and Centigrid®
Electromechanical Relay products, nor are these substances employed during
any electromechanical relay manufacturing process:

Lead
Mercury
Cadmium
Hexavalent Chromium
Polybrominated Biphenyls (PBB’s)
Polybrominated Diphenyl Ethers (PBDE’s)

However, upon request from the Customer, relay leads may be coated with
solder, which contains 60% tin and 40% lead.

www.teledynerelays.com
(800) 284-7007 [email protected]

Page 14 (800) 284-7007 • www.teledynerelays.com ♦ +44 (0) 1236 453124 • www.teledyne-europe.com © 2008 Teledyne Relays
 Appendix A: Spacer Pads
Pad designation and Dim. H
Height For use with the following:
bottom view dimensions Max.
ER411T
.295 (7.49)
Ø.150
ER412, ER412D, ER412DD
Ø.150
[3.81]
[3.81] 712, 712D, 712TN,
(REF)
(REF) .300 (7.62)
Dim H RF300, RF310, RF320
Dim H
MAX
Ø.150 MAX ER420, ER422D, ER420DD, 421,
[3.81] Ø.150
(REF) [3.81] ER421D, ER421DD, ER422, ER422D, .305 (7.75)
(REF)
Ø.150
Ø.150 [3.81]
Dim H ER422DD, 722, 722D, RF341
MAX Dim H
[3.81] Ø.150
(REF) MAX ER431T, ER432T,
(REF)
Ø.150 [3.81]
Dim H
.400 (10.16)
[3.81] (REF)
Dim H MAX ER432, ER432D, ER432DD
(REF)
MAX Dim H
Dim H MAX 732, 732D, 732TN, RF303, RF313,
.410 (10.41)
MAX RF323
“M4” Pad for TO-5 Dim H
Dim H
RF312 .350 (8.89)
MAX
MAX

ER411, ER411D, ER411DD .295 (7.49)

Dim H
MAX Dim H
MAX
Dim H ER431, ER431D, ER431DD .400 (10.16)
Dim H MAX
MAX Dim H
Dim H MAX
MAX RF311 .300 (7.62)
Dim H
Dim H
MAX RF331 .410 (10.41)
“M4” Pad for TO-5 MAX

Dim H 172, 172D .305 (7.75)

MAX Dim H
MAX
Dim H ER114, ER114D, ER114DD,
Dim H MAX .300 (7.62)
MAX Dim H
J114, J114D, J114DD
.156 Dim H MAX
.156
[3.96] MAX
(REF)
[3.96] ER134, ER134D, ER134DD,
(REF) .400 (10.16)
J134, J134D, J134DD
.156
.156 Dim H
[3.96]
(REF) [3.96] MAX
Dim H RF100 .315 (8.00)
(REF) MAX
.256 .156
“M4”
.256 Pad for Centigrid®
[6.5]
[6.5]
.156 [3.96]
RF103 .420 (10.67)
(REF) [3.96] (REF)
.156
(REF) (REF)
.156 Dim H
[3.96]
[3.96] (REF) MAX Dim H 122C, A152 .320 (8.13)
(REF)
MAX
.256
[6.5] .256 Dim H
(REF) [6.5] Dim H MAX
(REF)
.256
MAX Dim H
Dim H MAX
ER116C, J116C .300 (7.62)
.256 [6.5] MAX
[6.5] (REF)
.256
(REF)
.256 [6.5]
[6.5] (REF) ER136C, J136C .400 (10.16)
(REF)

RF180 .325 (8.25)

A150 .305 (7.75)

“M9” Pad for Centigrid®
Notes:
1. Spacer pad material: Polyester film.
2. To specify an “M4” or “M9” spacer pad, refer to the mounting variants portion of the part numbering
example in the applicable datasheet.
3. Dimensions are in inches (mm).
4. Unless otherwise specified, tolerance is ± .010 (.25).
5. Add 10 mΩ to the contact resistance shown in the datasheet.
6. Add 0.01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.
© 2008 Teledyne Relays SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 15
 Appendix A: Spreader Pads

Pad designation and Dim. H

Height For use with the following:
bottom view dimensions Max.
ER411T, J411T, ER412, ER412D
.370[9.4]
.370 [9.4]
MAX SQ
MAX SQ
ER412DD, J412, J412D, J412DD .388 (9.86)
.370[9.4]
.370 [9.4]
MAX SQ
MAX SQ .100
.100
[2.54]
ER412T, J412T
[2.54]
.100
.100
.370
.370[9.4]
MAX
[9.4] [2.54]
[2.54]
Dim HH
Dim 712, 712D, 712TN .393 (9.99)
MAX SQSQ MAX
MAX
Dim
Dim HH
.100
.150
.150 .100
[2.54]
[2.54]
MAX
MAX .014
.014 ER431T, J431T, ER432, ER432D
[3.81]
[3.81] [0.36]
[0.36]
.300
.300 .150
.150
[3.81]
[3.81]
Dim HH
Dim .014
.014
(REF)
(REF)
[0.36]
[0.36]
ER432DD, J432, J432D, J432DD .493 (12.52)
[7.62]
[7.62] MAX
MAX
.300
.300
[7.62] .150
[7.62] .150 .100
.100
(REF)
(REF)
.014
.014
ER432T, J432T
[3.81]
[3.81] [2.54]
[2.54] [0.36]
[0.36]
.300
.300
.100
.100
.370
.370 (REF)
(REF) 732, 732D, 732TN .503 (12.78)
[7.62] [2.54]
[2.54]
[7.62] [9.4]
[9.4]
.200
.200 .100
.100
.370
.370
MIN
MIN
[9.4]
[9.4]
ER420, J420, ER420D, J420D
[5.08]
[5.08] [2.54]
.200
.200 [2.54] MIN
MIN ER420DD, J420DD, ER421, J421
[5.08]
[5.08] .370
.370 .398 (10.11)
.200
[9.4]
MIN
[9.4] ER421D, J421D, ER421DD
.200 MIN
"M" Pad 5/ 6/
[5.08]
[5.08]
.390
.390 [9.91]
[9.91] J422D, ER422DD, J422DD, 722
SQ
SQ
.390[9.91]
.390 [9.91] .100
.100
SQ
SQ [2.54]
[2.54]
.100
.100
ER411T
.390
.390[9.91]
[9.91]
[2.54]
[2.54] ER412, ER412D, ER412DD .441 (11.20)
SQ
SQ
.100
.100
[2.54]
[2.54]
.100
.100
.150
.150
[2.54] Dim HH
Dim
J412, J412D, J412DD
.100
.100 [2.54]
[3.81]
[3.81]
.150
.150 MAX
MAX
.300 [2.54]
.300 [2.54] Dim
Dim HH
[7.62]
[7.62]
[3.81]
[3.81]
MAX
MAX
712, 712D .451 (11.46)
.300 .100
.300
.100
[7.62] [2.54]
[7.62] [2.54]
.150
.150 Dim HH
Dim ER421, ER421D, ER421DD
[3.81]
[3.81] MAX
MAX .451 (11.46)
.300
.300
[7.62]
722, 732D
[7.62] .130
.130
.150
.150
[3.81]
[3.81]
[3.3]
[3.3]
.130
.130 ER431T
.300
.300
.150
.150 [3.3]
[3.3] .546 (13.87)
[7.62]
[7.62] [3.81]
[3.81] ER432, ER432D, ER432DD
.300
.300 .130
.150 .130
[7.62]
[7.62] .150 [3.3]
[3.3]
.3007/ 8/
[3.81]
[3.81] 732, 732D .556 (14.12)
"M2" Pad
.300
[7.62]
[7.62]
.370[9.4]
.370 [9.4]
MAX SQ
MAX SQ
.370[9.4]
.370 [9.4]
ER411, ER411D, ER411DD
MAX SQ
MAX SQ .100
.100
ER411TX
[2.54]
[2.54]
.100
.100 .388 (9.86)
.370
.370[9.4]
MAX
[9.4] [2.54]
[2.54]
Dim HH
Dim ER412X, ER412DX, ER412DDX
MAX SQSQ MAXH
MAX
Dim
Dim H
.150
.150
.100
.100 MAX
MAX .014
.014
ER412TX
[3.81]
[3.81] [2.54]
[2.54] [0.36]
[0.36]
.300
.300 .150
.150
[3.81]
[3.81]
Dim HH
Dim .014
.014
(REF)
(REF)
[0.36]
[0.36]
712X, 712DX, 712TNX .393 (9.99)
[7.62]
[7.62] MAX
MAX
.300
.300 (REF)
(REF)
[7.62] .150
[7.62] .150 .100
.100 .014
.014
ER420X, ER420DX, ER420DDX
[3.81] [0.36]
.300
[3.81] [2.54]
[2.54]
.100
.100
[0.36]
(REF) ER421X, ER421DX, ER421DDX
.300
[7.62] [2.54]
[2.54]
.370
.370 (REF)
.398 (10.11)
[7.62]
.200
.200
[9.4]
[9.4]
.370
.370 ER422X, ER422DX
.100
.100
MIN
MIN
[9.4]
[5.08]
[5.08]
.200
.200 [2.54]
[2.54]
[9.4]
MIN
MIN
ER422DDX, 722X, 722DDX
[5.08]
[5.08] .370
.370
[9.4]
[9.4] ER431, ER431D, ER431DD
.200
.200 MIN
MIN
[5.08]
[5.08] ER431TX
.493 (12.52)
ER432X, ER432DX, ER432DDX
ER432TX
"M3" Pad 5/ 6/ 9/ 732X, 732DX, 732TNX .503 (12.78)
Notes:
1. Spreader pad material: Diallyl Phthalate.
2. To specify an “M”, “M2” or “M3” spreader pad, refer to the mounting variants portion of the part number example
in the applicable datasheet.
3. Dimensions are in inches (mm).
4. Unless otherwise specified, tolerance is ± .010” (0.25).
5/. Add 25 mΩ to the contact resistance shown in the datasheet.
6/. Add .01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.
7/. Add 50 mΩ to the contact resistance shown in the datasheet.
8/. Add 0.025 oz (0.71 g) to the weight of the relay assembly shown in the datasheet.
9/. M3 pad to be used only when the relay has a center pin (e.g. ER411M3-12A, 722XM3-26.)
Page 16 (800) 284-7007 • www.teledynerelays.com ♦ +44 (0) 1236 453124 • www.teledyne-europe.com © 2008 Teledyne Relays
 .050 .050
[1.27] [1.27] "X" "X" POSITION
POSITION

Appendix A: Ground Pin Positions

"U" POSITION
"U" POSITION
.100 .100
[2.54] [2.54] (ER116C and ER136C
(ER116C andonly)
ER136C only)

"Z" "Z" POSITION

POSITION "Z" "Z" POSITION
POSITION
Ø.200 Ø.200
[Ø5.08] [Ø5.08]
"X" "X" POSITION
POSITION Ø.200 Ø.200
[Ø5.08] [Ø5.08]

"Y" POSITION
.100 "Y" POSITION "Y"
36°±3° 36°±3° "Y" POSITION LEGEND:
45°±3° 45°±3° "Y" POSITION
POSITION
[2.54]
Glass Insulated Lead
position
TO-5 Relays: "Z" POSITION TO-5 Relays:
ER411T, ER412, ER412T, ER420, ER421, ER422, Ground
ER411,PinER431,
position RF311, RF331
.100
[2.54] ER431T, ER432, ER432T, 712, 712TN, 400H, 400K,
Either Ground Pin or
400V, RF300, RF303, RF341, RF312, RF310, RF313, Insulated Lead position
RF320, RF323 depending on Relay type

.100
[2.54]

"Y" POSITION
.100
[2.54]
"W" POSITION "Y" POSITION
.100
[2.54]

.100
"Z" POSITION
[2.54] "Z" POSITION

.050 .100
[1.27] "X" POSITION [2.54]

.100
"U" POSITION
.100
[2.54] (ER116C and ER136C only) [2.54]

Centigrid® Relays: Centigrid® Relays:

RF180, ER116C, 122C, ER136C RF100, RF103, ER114, ER134, 172 "Y" POSITION
"Z" POSITION .100"Z" POSITION
ON
Ø.200 [2.54]
[Ø5.08] LEGEND: "W" POSITION
ON "X" POSITION Ø.200
LEGEND:
Glass Insulated Lead [Ø5.08]
position "Z" POSITION
ON
ITION NOTES.100
Glass Insulated Lead [2.54]
LEGEND:
position 1. Terminal views shown
ON Indicates
Ground Pinground
positionpin position
2. Dimensions .050are in inches (mm)
Ground
Glass
IndicatesPinglass
position
Insulated Lead
insulated lead position 3. Tolerances:[1.27]
± .010 (±.25) unless otherwise specified "X" POSITION
Either
position Ground Pin or
ITION Insulated Lead position 4. Ground pin positions are within .015 (0.38) dia. of true position
36°±3°
Indicates ground pin or lead position
Either
depending
Ground on"Y"
Ground PinPOSITION
or type
Relay
Pin position 45°±3° 5. Ground pin head "Y" dia.,
POSITION
0.035 (0.89) ref: height 0.010 (0.25) ref.
depending
Insulated on position
Lead relay type 6. Lead dia. 0.017 (0.43) nom. .100 "U" POSITION
Either Ground Pin or type
depending on Relay
[2.54] (ER116C and ER136C only
Insulated Lead position
© 2008 Teledynedepending
Relays on Relay type SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 17
 Appendix B: Teledyne Relays T2R Program
Teledyne Relays’ program was developed to provide the JAN relay user an alternate means of specifying and procuring
established reliability relays. The form, fit and function of a relay is the same as that of its JAN counterpart. program
requirements differ in certain regimens/tests found in both MIL-PRF-28776 and MIL-PRF-39016 that add cost but no value to
the relay.

This program parallels the military specifications in most aspects. The components that make up such a program are intricate
and varied. It is very difficult to detail on a one-to-one basis how the two programs differ. The following page presents a table
that compares the 100% screening performed on JAN relays and relays prior to shipment.

Other significant highlights of the program include:

• Two unique screening levels

• The ability to define lead finish
• Spacer pad options not allowed by the military specifications
• Ground pin options not allowed by the military specifications
• Reduced lead time
• Reduced cost

The program is fully defined for both general product requirements and detailed product requirements in the following Teledyne
Relays specifications:

TR-R-1
TR-STD-1
TR-STD-2
TR-ERL-1
TR-R-1/XXX
TR Supplement

Copies of these documents are available from Teledyne Relays. We suggest that users check with Teledyne Relays from time
to time to assure that they have the latest issue.

Can’t Find What You Need?

Check out our full line of relays and switches. Order literature online at
http://www.teledynerelays.com/litrequest.asp

Page 18 (800) 284-7007 • www.teledynerelays.com ♦ +44 (0) 1236 453124 • www.teledyne-europe.com © 2008 Teledyne Relays
 Appendix B: Teledyne Relays T2R Program

Screening Levels
Applicable To
INSPECTION A Level B Level JAN L Level JAN M Level
1.5%/10K Cycles .75%/10K Cycles 3%/10K Cycles 1%/10K Cycles
Subgroup 1
Screening, Internal Moisture AQL X X X X
Vibration (Sinusoidal) AQL X
Vibration (Sinusoidal) 100% X X
Screening, Burn-In (Hybrids only) X X X
Screening, Run-In (Room Temperature) X
Screening, Run-In (+125°C and –65°C) X X X
Subgroup 2
Coil Resistance or Coil Current X X X X
Insulation Resistance X X X X
Dielectric Withstanding Voltage X X X X
Static Contact Resistance X X X X
Pickup and Dropout or Set and Reset Voltage X X X X
Operate and Release or Set and Reset Time X X X X
Hold Voltage X X
Turn-On and Turn-Off Time (Hybrids only) X X X X
Contact Bounce Time X X
Contact Stabilization Time X X
Turn-On Current (T Hybrids only) X X X X
Turn-On voltage (C Hybrids only) X X X X
Turn-Off Voltage (Hybrids only) X X X X
Coil Transient Suppression
X X X X
(D, DD and Hybrids only)
Diode Blocking Integrity (DD only) X X X X
Zener Voltage (C Hybrid only) X X X X
Neutral Screen (Latching Relays only) X X X X
Break Before Make Verification X X
Contact Simultaneity X X
Subgroup 3
Solderability 2 Samples per Daily Solderability
X X X X
Inspection Lot
Leak Test X X X X
External Visual and Mechanical Inspection 2/Lot for
X X X X
Dimension and Weight Check

© 2008 Teledyne Relays SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 19

 Appendix: Teledyne Relays HI-REL Program

Teledyne Relays: Because in deep space

there is no acceptable failure rate
Teledyne Relays has a long history of supplying High Relay Types
Reliability relays for use in space bound vehicles. From the TO-5 Magnetic-Latching Relays
earliest deep space probes, such as Voyager I, now nearing TO-5 Non-Latching Relays
10 billion miles out in space, to the next generation of probes TO-5 Magnetic-Latching, High-Shock Relays
scheduled for the future , Teledyne Relays continues to be TO-5 Non-Latching, High-Shock Relays
the preeminent supplier of Hi-Reliability relays to the space TO-5 Non-Latching, High-Vibration Relays
market.
Hi-Rel Screening Capabilities
Teledyne Relays Hi-Reliability Specification: 100% Open Electrical Inspection
TR-HIREL-1 100% Precap Inspection
Fully Automated Small Particle Inspection
• Eliminates the need for customers to develop and maintain
specifications. (Millipore Clean)
Asynchronous Miss Test
• Manufacturing and Quality Assurance requirements are
fully defined and documented. Coil Continuity
Sine Vibration
• Meets the general requirements of both ESA/SCC and
NASA/GSFC documents. Random Vibration
• Offers options for 100% Group A screening High/Low Run In
(Miss Test) –65 ºC ± 125 ºC
• Offers options for 3 levels of Lot Acceptance Testing
(LAT). Radiographic Inspection
Mechanical Shock Test
Teledyne Screening Document 0-40-837 Thermal Shock Test
NASA approved screening regimen based on NASA/GSFC Acceleration
S-311-P.754 Radiographic Inspection (X-ray)
Mechanical Shock Test
Thermal Shock Test
Acceleration
Load Banks for a Variety of Life Test Load
Serialized Printed Electrical Data
Continuous Life Testing
Environmental Testing
Vertical Integration

For information or answers to your questions, contact

Dan Yracheta, Program Manager, at (323) 241-1218 or
[email protected].

Page 20 (800) 284-7007 • www.teledynerelays.com ♦ +44 (0) 1236 453124 • www.teledyne-europe.com © 2008 Teledyne Relays
 Authorized Distributors
NORTH AMERICA FINLAND LATVIA
ALLIED ELECTRONICS ARROW Finland Oy ARROW Latvia
Tel: (800) 433-5700 Tel: +358 9 4766 6396 Tel: +371 7311490
www.alliedelec.com/search.asp www.arrowne.com E-mail: [email protected]  
http:www.arrowne.com  
ASAP ELECTRONICS FRANCE
Tel: (800) 477-1272 ARROW France LITHUANIA
www.asapelectronics.com Tel: +33 1 4180 8424 ARROW Lithuania
E-mail: [email protected] Tel: +370-37-759015
AVNET E-mail: [email protected]  
Tel: (800) 772-8638 GERMANY http:www.arrowne.com    
www.em.avnet.com Adelco Elektronik GmbH
Tel: +49 (0) 4106 61040 MALAYSIA
CCA-WESCO E-mail: [email protected] Device Electronics PTE, Ltd.
(Solid State Relays Only) www.adelco-elektronik.de Tel: (603) 7880 8626/8636
Tel: (508) 870-5000 E-mail: [email protected]
www.cca-corp.com Hot Electronic GmbH
Tel:+49 (0) 89 666 2836 NETHERLANDS
MASTER DISTRIBUTORS E-mail: [email protected] Nijkerk Electronics B.V.
Tel: (888) 473-5297 www.hot-electronic.de Tel: +32 (0) 3 544 7066
www.onlinecomponents.com E-mail: [email protected]
MRC Components oHG www.nijkerk-ne.com
MOUSER ELECTRONICS Tel: +49 (0) 8161 98480
Tel: (800) 346-6873 E-mail: [email protected] NORWAY
www.mouser.com www.mrccomponents.de ARROW Norway A/S
Tel: +47 (0) 21306532
RICHARDSON ELECTRONICS Zettler electronics GmbH [email protected]
Tel: (800) 737-6937 Tel: +49 (0) 89 800 97-0 www.arrowne.com
www.rell.com E-mail: [email protected]
www.zettlerelectronics.com POLAND
SHERBURN ELECTRONICS Zettler electronics Poland sp.z.o.o.
Tel: (800) 366-3066 INDIA Tel: +48 (0) 68 4791438
www.sherburn.com Specsynergy Technologies, Inc. E-mail: [email protected]
San Jose, CA (Main Office) www.zettlerelectronics.pl
INTERNATIONAL Tel: (408) 954-8474 x105
RICHARDSON ELECTRONICS E-mail: [email protected] RUSSIA
Tel: (800) 737-6937 Petersburg Electronic Company JSC
www.rell.com Specsynergy Technologies, Inc. Tel: +7 812 4488 777
New Delhi Office e-mail: [email protected]
BELGIUM & LUXEMBOURG Tel: 91 11 25860 752 www.pec.spb.ru
Nijkerk Electronics nv E-mail: [email protected]
Tel: +32 (0) 3 544 7066 SINGAPORE
E-mail: [email protected] ISRAEL Device Electronics PTE, Ltd.
www.nijkerk-ne.com STG International Ltd. Tel: 65-288 6455
Tel: +972 (0) 3 733 1400 E-mail: [email protected]
CANADA E-mail: [email protected]
Cee-Jay Microsystems www.stggroup.co.il SWEDEN
Tel: (613) 599-5626 OEM Electronics
www.cjmicro.com ITALY Tel: +46 75 242 4562
SINCRON s.r.l. E-mail: [email protected]
CHINA & HONG KONG Tel: +39 02 95384218 www.oemelectronics.se
El-Pax, Inc. E-mail: [email protected]
USA Head Office www.sincron.it SWITZERLAND
Tel: 650-692-8896 ENA AG
E-mail: [email protected] JAPAN Tel: +41 56 6342834
Comcraft Corporation Tokyo E-mail: [email protected]
Beijing Office Tel: 81-3-3395-5553 www.ena.ch
Tel: 86-10-6503-2171 E-mail: [email protected]
E-mail: [email protected] www.comcraft.co.jp TAIWAN
Bright Toward Industrial Co., Ltd.
CZECH REPUBLIC Comcraft Corporation Osaka Tel: +886-2-822-76000
Amtek spol. s.r.o. Tel: 81-6-6396-7722 E-mail: [email protected]
Tel: +420 547 125 555 E-mail: [email protected] www.relays.com.tw
E-mail: [email protected] www.comcraft.co.jp
www.amtek.cz UNITED KINGDOM
KOREA Arrow Electronics UK Ltd.
DENMARK Electro-Comm USA Tel: +44 (0) 1279 626 777
ARROW Denmark A/S Tel: (323) 254-7790 www.arrowne.com
Tel: +45 (0) 70102211 E-mail: [email protected]
E-mail: [email protected] www.anyeparts.com Willow Technologies Ltd.
www.arrowne.com Tel: +44 (0) 1342 835 234
Electro-Comm SEOUL E-mail: [email protected]
ESTONIA Tel: 82-31-713-4216 www.willow.co.uk
ARROW Estonia E-mail: [email protected]
Tel: +372 6 774250 www.anyeparts.com 2001 Electronic Components Ltd.
E-mail: [email protected] Tel: +44 (0) 1438 742 001
www.arrowne.com E-mail: [email protected]
www.2001elec.co.uk

© 2008 Teledyne Relays SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 21

 HEADQUARTERS
12525 Daphne Ave.
Hawthorne, CA 90250
Phone: (323) 777-0077 or (800) 284-7007
Fax: (323) 241-1287
E-mail: [email protected]

www.teledynerelays.com

EUROPE
9-13 Napier Road
Wardpark North
Cumbernauld G68 OEF
Scotland UK
Phone: +44 (0) 1236 453 124
Fax: +44 (0) 1236 780 651
E-mail: [email protected]

www.teledyne-europe.com

PRINTED IN U.S.A. TR0408