Scribd
Upload
269 views2 pages

MatrikonOPC Server For Simulation Quick Start Guide PDF

Uploaded by

Jorge Perez Castañeda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
269 views2 pages

MatrikonOPC Server For Simulation Quick Start Guide PDF

Uploaded by

Jorge Perez Castañeda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MatrikonOPC Server for Simulation Quick Start

Guide
This document is designed to get you up and running on MatrikonOPC™ Server for Simulation as
quickly as possible.

Getting Started
You must have already installed the product to use this Quick Start Guide. For installation
instructions, refer to the Installation section in the MatrikonOPC Server for Simulation User’s
Manual that accompanies the product software.

Working With MatrikonOPC Server for Simulation


To launch MatrikonOPC Server for Simulation:
1. Click on the Windows Start button and select Programs -> MatrikonOPC->Simulation,
and then select MatrikonOPC Server for Simulation.
2. The MatrikonOPC Server for Simulation Configuration window appears.

Note: The MatrikonOPC Server for Simulation does not require any configuration. However, new
aliases can be added, or security settings can be modified, after the initial install.

To insert a new alias, perform the following steps:


1. Open the MatrikonOPC Server for Simulation Configuration window, as described in the To
launch MatrikonOPC Server for Simulation procedure above.
2. Click on the Alias Configuration node in the Current Configuration panel to open the
Alias Configuration panel.
3. Right-click your mouse and select the Insert New Alias option, or
Press the Insert button on the keyboard, to launch the Insert New Alias window.
4. Fill in a name for the alias, and enter a valid item path. The item path can be found by
browsing the server’s address space (use the ellipsis button next to this field).
5. Save this alias when finished. It will now be visible to OPC clients under the Configured
Aliases heading.
6. For more detailed scaling options, please consult the MatrikonOPC Server for Simulation
User’s Manual.
To configure OPC Security, perform the following steps:
1. Click on the Windows Start button and select Programs -> MatrikonOPC ->Simulation,
and then select Tag Security.
2. Enter the server’s security password. By default, this is MatrikonOPC.
3. To add a new user, click on the Add User icon, and select the user type, location, and user
name.
4. Select a path in the server’s address space, and assign permissions (Browse, Add, Read,
Write) to this path. Repeat as required. Click on the OK button.

MatrikonOPC Server for Simulation Quick Start Guide 1


5. To add a new group, click on the Add Group icon, and select the group type, location, and
group name.
6. Select a path in the server’s address space, and assign permissions (Browse, Add, Read,
Write) to this path. Repeat as required. Click on the OK button.
7. When finished, click on either the OK or Apply button to save the changes to the server’s
security configuration.
8. For more detailed security configurations, please consult the MatrikonOPC Server for
Simulation User’s Manual

For More Information


Should you require more details, please refer to the MatrikonOPC Server for Simulation User’s
Manual. For assistance, please contact MatrikonOPC Support.
The MatrikonOPC Customer Services department (www.opcsupport.com) is available 24 hours a
day, seven days a week. Contact MatrikonOPC Support using the information below, or send an
email ([email protected]).
For Monday to Friday daytime support requests, contact MatrikonOPC Support using the following
regional phone numbers.

Region Office Hours Contact Information


North America
8:00am-5:00pm +1-877-OPC-4-ALL
UTC/GMT -7 hours (MST)
Europe /Africa * +49-221-969-77-0
9:00am-5:00pm
UTC/GMT +1 hours (CET) (Request OPC Support)
Middle East *
9:00am-5:00pm +973-174-65363
UTC/GMT +3 hours
Australia/Asia * +61-2-4908-2198
9:00am-5:00pm
UTC/GMT +10 hours (AEST) (Request OPC Support)
* Toll-free regional numbers coming soon!
For after-hours support in all regions, please use either of the following numbers. There is no
extra charge from MatrikonOPC for calling their after-hours support numbers.

Region Contact Information


+1-780-231-9480
All
+1-780-264-6714

MatrikonOPC Server for Simulation Quick Start Guide 2

You might also like