Scribd Logo
Upload

Welcome to Scribd!

  • 65 views

    S5000 Data Sheet PDF

    Uploaded by

    Anonymous X3PnFL6

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    S5000 Data Sheet PDF

    Uploaded by

    Anonymous X3PnFL6
    65 views2 pages

    Original Title

    S5000 data sheet.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    65 views2 pages

    S5000 Data Sheet PDF

    Uploaded by

    Anonymous X3PnFL6

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    S5000 Gas Monitor

    Extreme Durability. Anytime. Anywhere.

    Simple retrofits have identical Wide operating temperature


    footprint and wiring to S4000 for extreme environments
    Gas Monitor series. (-55°C to +75°C).

    Bluetooth® wireless
    technology allows mobile Instrument status indicators
    device to act as HMI screen illuminate power, fault and
    and controller. Download alarm conditions.
    the X/S Connect App from
    the Google Play store.

    Dual sensor capability


    Intuitive user experience
    increases detection coverage
    with industry-first
    without increasing CAPEX
    touch-button interface or
    expense. Remote mount gas
    familiar magnetic interface.
    sensors up to 100 m away.

    Reduce setup time by at least


    50% with the X/S Connect App

    Advanced Sensor Technology

    • Patented XCell Sensors with TruCal technology extend calibration cycles for
    as long as 18 months, actively monitor sensor integrity, and compensate
    for environmental factors and electrochemical sensor drift.
    • Worry-free operation; automatically self-checks four times per day.
    • Three-year warranty and five-year expected life for XCell Sensors.
    • SafeSwap enables safe and quick XCell Sensor replacement
    without powering-off gas detector.

    Applications *Only CO & H2S XCell Sensors

    • Compressor stations • LNG/LPG processing and storage


    • CNG maintenance facilities • Oil well logging
    • Drilling and production platforms • Refineries
    • Fuel loading facilities

    GMS5000.com
    S5000 Gas Monitor
    Specifications

    PRODuCt SPECIfICAtIOnS MECHAnICAl SPECIfICAtIOnS


    COMBuStIBlE GAS Catalytic Bead (Passive Comb, XCell Comb) InPut POWER 24 VDC nominal, 12 to 30 VDC
    SEnSOR tyPE Infrared (IR400)
    SIGnAl OutPut Dual 4-20 mA current source, HART, Modbus,
    tOXIC GAS Hydrogen Sulfide H2S (Passive MOS, XCell Toxic) Bluetooth. Optional: w/o Bluetooth
    SEnSOR tyPE Carbon Monoxide CO (XCell Toxic)
    RElAy RAtInGS 5A @ 30VDC; 5A @220 VAC
    Carbon Monoxide CO H2-Resistant (XCell Toxic)
    (3X) SPDT – fault, warn, alarm
    Oxygen O2 (XCell O2)
    RElAy MODES Common, discrete, horn
    SEnSOR MEASuRInG All Combustible: 0-100% LEL
    RAnGES H2S MOS: 0-20, 0-50, 0-100 ppm nOMInAl MAX Passive Comb 6.0 W
    H2S XCell: 0-10, 0-50, 0-100 ppm POWER Passive MOS 10.8 W
    CO: 0-100, 0-500, 0-1000 ppm IR400 8.9 W
    (W/ RElAyS)
    CO H2-Resist: 0-100 ppm XCell Comb 6.0 W
    O2: 0-25% XCell Toxic & O2 3.6 W
    IR400 + XCell Comb 11.8 W
    tyPICAl SEnSOR lIfE 5 years – catalytic bead, MOS, XCell Sensor IR400 + XCell Toxic or O2 9.6 W
    10 years - infrared Dual XCell Toxic or O2 4.3 W
    SEnSOR t90 Dual XCell Comb 8.4 W
    ZERO DRIft
    PERfORMAnCE* (tyPICAl) REPEAtABIlIty XCell Comb + XCell Toxic or O2 9.1 W
    (PER yEAR)
    EMC DIRECtIvE Complies with EN 50270, EN 61000-6-4,
    PASSIvE COMB <30 sec. +/- 3% LEL < 5% LEL
    EN 61000-6-3
    PASSIvE MOS <60 sec. +/- 2 ppm < 0.1 ppm
    StAtuS InDICAtORS 4-digit scrolling LED, icons depicting fault, warn,
    IR400 <3 sec. +/- 3% LEL < 2% LEL alarm, Bluetooth, 1 and 2 to indicate sensor
    XCEll COMB <22 sec. ≤ +/- 1% LEL <5% LEL reading displayed

    XCEll H2S <23 sec. +/- 5% <1% full scale RS-485 OutPut Modbus RTU, suitable for linking up to 128 units
    or up to 247 units with repeaters
    XCEll CO <9 sec. +/- 5% <1% full scale
    BAuD RAtE 2400, 4800, 9600, 19200, 38400, 115200
    XCEll O2 <15 sec. ≤ +/- 0.3% Vol 0.2% Vol
    HARt HART 7, HART device description language
    APPROvAlS Class I, Div 1&2, Groups A, B, C & D, T5/T4; available
    ClASSIfICAtIOn Class II, Div 1&2, Groups E, F & G, T6; Class III
    Type 4X, IP66 fAultS MOnItORED Low supply voltage, RAM checksum error, flash
    US Zones checksum error, EEPROM error, internal circuit
    Class I, Zone 1 AEx db IIC T5 Gb error, relay, invalid sensor configuration, sensor
    Class I, Zone 2 AEx nA nC IIC T4 Gc faults, calibration faults, analog output
    Class II, Zone 21 AEx tb IIIC T85°C Db mismatch fault
    Canadian Zones/ATEX/IECEx CABlE 3-wire shielded cable for single sensor and
    Ex db IIC T5 Gb REquIREMEntS 4-wire shielded cable for dual sensor
    Ex nA nC IIC T4 Gc configurations. Accommodates up to 12 AWG
    Ex tb IIIC T85°C Db Refer to manual for mounting distances.
    (see manual for complete CSA listings)
    DIMEnSIOnS
    WARRAnty S5000 transmitter: 2 years
    XCell Sensors: 3 years 6.37 4.25
    2X R.155 1.85
    Passive Comb, Passive MOS, IR400: 2 years
    APPROvAlS CSA, ATEX, IECEx, CE Marking
    Complies with C22.2 No. 152, FM 6320,
    5.38 6.00
    IEC/EN 60079-29-1, ANSI/ISA 12.13.01.
    7.62
    Suitable for SIL 2 2.70

    EnvIROnMEntAl SPECIfICAtIOnS
    OPERAtInG Passive Comb (sintered): -40°C to +70°C 4X 3/4 NPT
    tEMPERAtuRE Passive Comb (screened): -40°C to +75°C PASSIVE SENSOR 8 lbs (3.6 kg) - 316 SS

    RAnGE Passive MOS (sintered): -40°C to +70°C Note: This Bulletin contains only a general Corporate Headquarters:
    Passive MOS (screened): -40°C to +75°C description of the products shown. While uses MSA – the Safety Company
    IR400 (CSA): -40°C to +75°C and performance capabilities are described, 1000 Cranberry Woods Drive
    under no circumstances shall the products be Cranberry Township, PA 16066
    IR400 (ATEX/IECEx): -60°C to +75°C used by untrained or unqualified individuals United States
    XCell Comb: -55°C to +60°C and not until the product instructions +1-724-776-8600
    XCell Toxic & O2: -40°C to +60°C including any warnings or cautions provided [email protected]
    have been thoroughly read and understood.
    StORAGE S5000: -45°C to +85°C Only they contain the complete and detailed Design Center:
    tEMPERAtuRE RAnGE (includes housing and all sensors) information concerning proper General Monitors
    use and care of these products. 26776 Simpatica Circle
    OPERAtInG HuMIDIty 10-95% (XCell Toxics & O2) Specifications subject to change Lake Forest, CA 92630
    RAnGE 0-95% (Passive & XCell Comb, IR400, Passive MOS) without notice. United States
    +1-949-581-4464
    [email protected]
    *At ambient conditions ID 1465-021-MC / Apr 2017
    © MSA 2017 Printed in U.S.A.
    Additional locations can be found on our web site:
    www.MSAsafety.com

    MSAsafety.com/detection

    You might also like