Scribd
Upload
77 views1 page

Plat

This mill test certificate provides details on a steel plate order from PT. Bukaka Teknik Utama Tbk including specifications, chemical composition, tensile and impact test results. A total of 96 plates across 13 grades were produced weighing 235,791 kg. The certificate confirms the material was produced according to specifications and certifies the test results in accordance with ISO and EN standards.

Uploaded by

Sitorus Devis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
77 views1 page

Plat

This mill test certificate provides details on a steel plate order from PT. Bukaka Teknik Utama Tbk including specifications, chemical composition, tensile and impact test results. A total of 96 plates across 13 grades were produced weighing 235,791 kg. The certificate confirms the material was produced according to specifications and certifies the test results in accordance with ISO and EN standards.

Uploaded by

Sitorus Devis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Certificate No./No.

Sertifikat : 200929-FPQ8IN-0011A1-0015
Mill Test Certificate Date of Issue/Tanggal Penerbitan : Oct., 01, 2020
Sertifikat Pengujian Pabrik
Order No./No.Pemesanan : Q8S1019317 PO No./No.Pemesanan Pembelian : Q8S1019317
Supplier : PT. Bukaka Teknik Utama Tbk Commodity : PLATE
/Pemasok /Komoditas
Customer : PT. BUKAKA TEKNIK UTAMA TBK Spec & Type : JIS G3106 SM490YB
/Pelanggan /Jenis dan spesifikasi
Tensile Test Impact Test Chemical Composition/Komposisi Kimia
/Tarik /Impak

Position

Division
Weight YP TS EL V Notch +0℃
Product No. Quantity Heat No.
Size/Ukuran /Berat (㎫) (%) Energy C Si Mn P S
/No.Produk /Kuantitas /No.Charge
(㎏)
(Joule) (%) (%) (%) (%) (%)

*** Sub Total (220) *** 4 18,840 (kg)

32x1600x10000 PK72962001-2002 2 8,038 SK63534 T 372 535 26 1: 156 L 0.1681 0.342 1.481 0.0139 0.0031
2: 180
3: 190
A: 175
*** Sub Total (230) *** 2 8,038 (kg)
*** Grade Total *** 13 41,787 (kg)
*** Grand Total *** 96 235,791 (kg)
=== Last Item ===

* Position - T : Top, M : Middle, B : Bottom We hereby certify that the material herein has been made in accordance with the order and above specification.
* Tensile Test. Direction : Transversal, Gauge Length : 200㎜(Rectangular), This material has been fully killed and made by basic oxygen process. This material is fine grained steel.
YP Method : Upper Point This material has been made by vacuum degassing process.
* Impact Test. Direction : 1/4T Longitudinal, Full-Size : 10㎜X10㎜ Test Certificate is issued according to ISO 10474/EN 10204 3.1.
* Division - L : Ladle Analysis
* Supply Condition : As-Rolled unless otherwise Heat Treated.

Legal sanction can be imposed on forging. Improper use of product can cause safety issues.

Surveyor To :

PT.KRAKATAU POSCO Jl. Afrika, No. 2, Kawasan Industri Krakatau Cilegon, Banten, 42443, Indonesia < PAGE : 15 > Testing and Inspection Team Leader CHOI JONG-SEOG

You might also like