Scribd
Upload
67 views1 page

AD8009 Part2

The document provides specifications for the AD8009 amplifier, including: 1) Dynamic performance specs such as bandwidth up to 1 GHz, slew rate of 4,500-5,500 V/μs, and settling time of 10 ns or less. 2) Harmonic and noise specs like second and third harmonic distortion between -56 to -73 dBc and input voltage noise of 1.9 nV/√Hz. 3) DC specs including input offset voltage of 2-5 mV, input bias current of 50-150 μA, and open-loop transresistance of 90-250 kΩ.

Uploaded by

mhasansharifi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
67 views1 page

AD8009 Part2

The document provides specifications for the AD8009 amplifier, including: 1) Dynamic performance specs such as bandwidth up to 1 GHz, slew rate of 4,500-5,500 V/μs, and settling time of 10 ns or less. 2) Harmonic and noise specs like second and third harmonic distortion between -56 to -73 dBc and input voltage noise of 1.9 nV/√Hz. 3) DC specs including input offset voltage of 2-5 mV, input bias current of 50-150 μA, and open-loop transresistance of 90-250 kΩ.

Uploaded by

mhasansharifi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AD8009–SPECIFICATIONS (@ T = 25C, V = 5 V, R = 100 ; for R Package: R = 301  for G = +1, +2,

A S L F
R = 200  for G = +10; for RT Package: R = 332  for G = +1, R = 226  for G = +2 and R = 191 for G = +10, unless otherwise noted.)
F F F F

AD8009AR/JRT
Model Conditions Min Typ Max Unit
DYNAMIC PERFORMANCE
–3 dB Small Signal Bandwidth, VO = 0.2 V p-p
R Package G = +1, RF = 301 Ω 1,000 MHz
RT Package G = +1, RF = 332 Ω 845 MHz
G = +2 480 700 MHz
G = +10 300 350 MHz
Large Signal Bandwidth, VO = 2 V p-p G = +2 390 440 MHz
G = +10 235 320 MHz
Gain Flatness 0.1 dB, VO = 0.2 V p-p G = +2, RL = 150 Ω 45 75 MHz
Slew Rate G = +2, RL = 150 Ω, 4 V Step 4,500 5,500 V/µs
Settling Time to 0.1% G = +2, RL = 150 Ω, 2 V Step 10 ns
G = +10, 2 V Step 25 ns
Rise and Fall Time G = +2, RL = 150 Ω, 4 V Step 0.725 ns
HARMONIC/NOISE PERFORMANCE
Second Harmonic G = +2, VO = 2 V p-p 10 MHz –73 dBc
20 MHz –66 dBc
70 MHz –56 dBc
Third Harmonic 10 MHz –77 dBc
20 MHz –75 dBc
70 MHz –58 dBc
Third Order Intercept (3IP) 70 MHz 26 dBm
W.R.T. Output, G = +10 150 MHz 18 dBm
250 MHz 12 dBm
Input Voltage Noise f = 10 MHz 1.9 nV/√Hz
Input Current Noise f = 10 MHz, +In 46 pA/√Hz
f = 10 MHz, –In 41 pA/√Hz
Differential Gain Error NTSC, G = +2, RL = 150 Ω 0.01 0.03 %
NTSC, G = +2, RL = 37.5 Ω 0.02 0.05 %
Differential Phase Error NTSC, G = +2, RL = 150 Ω 0.01 0.03 Degrees
NTSC, G = +2, RL = 37.5 Ω 0.04 0.08 Degrees
DC PERFORMANCE
Input Offset Voltage 2 5 mV
TMIN to TMAX 7 mV
Offset Voltage Drift 4 µV/°C
–Input Bias Current 50 150 ±µA
TMIN to TMAX 75 ±µA
+Input Bias Voltage 50 150 ±µA
TMIN to TMAX 75 ±µA
Open-Loop Transresistance 90 250 kΩ
TMIN to TMAX 170 kΩ
INPUT CHARACTERISTICS
Input Resistance +Input 110 kΩ
–Input 8 Ω
Input Capacitance +Input 2.6 pF
Input Common-Mode Voltage Range 3.8 ±V
Common-Mode Rejection Ratio VCM = ± 2.5 50 52 dB
OUTPUT CHARACTERISTICS
Output Voltage Swing ± 3.7 ± 3.8 V
Output Current RL = 10 Ω, PD Package = 0.7 W 150 175 mA
Short-Circuit Current 330 mA
POWER SUPPLY
Operating Range +5 ±6 V
Quiescent Current 14 16 mA
TMIN to TMAX 18 mA
Power Supply Rejection Ratio VS = ± 4 V to ± 6 V 64 70 dB
Specifications subject to change without notice.

–2– REV. F

You might also like