ILLUSTRATED SPARE PART LIST

FOR

3R1040 ENGINE
FOR TRACTOR APPLICATION
A/C – ACE

APPLICATION CODE NO.

3H.2123

KIRLOSKAR OIL ENGINES LIMITED

Regd. Office: Laxmanrao Kirloskar Road, Khadki, Pune - 411 003, (India).
Tel.: +91 (20) 2581 0341, 2581 5341. Fax: +91 (20) 2581 3208, 2581 0209.
Website: www.koel.co.in

JULY – 2013 PUBLICATION NO. 3H.382.25.0.00

1
 GROUP INDEX
APPLICATION CODE 3H.2123

PAGE
SR.NO. DESCRIPTION GROUP NO. QTY.
NO.
1 ADAPTOR ON INLET MANIFOLD 3H.520 1 4
2 BREATHER PIPE P2.128 1 5
3 CAM SHAFT P2.003 1 6
4 COVER FOR FUEL PUMP GEAR P2.121.2 1 7
5 CRANKSHAFT P5.005 1 8
6 CRANKSHAFT PULLEY P2.124.1 1 9
10 TO
7 CYLINDER HEAD FOR THREADED INJECTOR 3H.095.1 1
12
8 CYLINDER LINER.(105 DIA) 2H.008 3 13
9 DELIVERY BODY P2.028 1 14
10 DELIVERY TUBE P2.014 1 15
11 DIPSTICK P5.078 1 16
12 EXHAUST MANIFOLD P2.036.1 1 17
13 FLYWHEEL ASSEMBLY (S/F ACE TRACTOR) 3H.021.1 1 18
14 FLYWHEEL END FOOT(PACKING) 03.072 1 19
15 FLYWHEEL HOUSING (S/F ACE TRACTOR) 3H.020.1 1 20
16 FUEL FILTER MTG. AND FUEL PIPES P2.114 1 21,22
17 FUEL PUMP (ACE TRACTOR) P2.059.2 1 23
18 FUEL PUMP GEAR. 2H.011 1 24
19 GEAR CASING P2.101.1 1 25,26
20 HIGH PRESSURE PIPE P2.093 1 27
21 HYDRAULIC PUMP MOUNTING P2.040 1 28
INJECTOR (R1040 EU COMSTAGE II)
22 4H.376.20 3 29
MICO PART NUMBER (E 080 1439 00)
23 INLET MANIFOLD (3R TA) 3H.502.1 1 30
24 INTERMEDIATE GEAR ASSLY P2.088.1 1 31
25 LEAK OFF PIPE P2.127 1 32
26 LIFTING HOOK P5.013.1 1 33
27 LUB OIL COOLER P4.041 1 34
28 LUB OIL FILTER ASSEMBLY P2.116 1 35
29 LUB OIL PUMP P2.005 1 36,37
30 LUB. OIL SUMP P5.076.1 1 38
39 TO
31 MONOBLOCK CRANKCASE P2.100 1
41
32 MOUNTING FOR 12V ALTERNATOR P5.046.2 1 42
33 OIL SEAL HOUSING P2.129.3 1 43
PISTON AND CONNECTING ROD ASSEMBLY 44 TO
34 4H.1502 3
R1040NA (CMVR STAGE-II) 46
35 PUSHROD & TAPPETS 2H.007 3 47
36 ROCKER COVER FOR GODREJ 3H.190.1 1 48
37 SUCTION TUBE P5.077 1 49
38 SUMP DRAIN ARRANGEMENT 2H.035 1 50
39 THERMOSTAT HOUSING ARRANGEMENT P2.066.4 1 51,52
40 TRANSPORTATION FEET P5.016 1 53
41 VALVE ROCKER ASSLY. P2.010 1 54,55

2
 PAGE
SR.NO. DESCRIPTION GROUP NO. QTY.
NO.
42 WATER PUMP P2.021.1 1 56
43 WATER SEPERATOR MTG.ARRANGEMENT P2.115 1 57
44 SET OF JOINTS 3H.401.93 1 58
45 SET OF COPPER WASHERS 3H.401.94 1 59
46 SET OF O RINGS 3H.401.95 1 60
47 SET OF BEARINGS 1

NOTE: - AS CONTINUOUS IMPROVEMENTS ARE CONTEMPLATED THE ILLUSTRATION

AND DESCRIPTIONS ARE NOT BINDING.

3
TITLE: - ADAPTOR ON INLET MANIFOLD GROUP: - 3H.520

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 3H.520.01.0.PR ADAPTOR ON INLET MANIFOLD 1
2 3H.506.06.0.PR JOINT FOR AIR PIPE 1
3 50.506.08.000. PLAIN MACHINED WASHER - M8 4
4 50.003.08.025. SET SCREW - M8X1.25X25 - 8.8 4

4
TITLE: - BREATHER PIPE GROUP: - P2.128

4 3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 P5.041.01.0.00 BREATHER PIPE 1
2 3H.043.03.0.00 JOINT FOR ADAPTOR(PTL) 1
3 50.003.08.045. SET SCREW - M8X1.25X45 - 8.8 2
4 P2.128.01.0.00 BREATHER PIPE CLAMP 1
5 50.506.08.000. PLAIN MACHINED WASHER - M8 2
O RING - P.R.FERRULE
6 42.004.22.0.00 1
(2.7X18,21509)

5
TITLE: -CAM SHAFT GROUP: -P2.003

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 P2.003.10.0.00 CAMSHAFT ASSLY 1 OF SR. NO.-
2 TO 5
NOT SUPPLIED
2 P2.003.01.0.00 CAMSHAFT (MACHINING) 1 LOOSE
NOT SUPPLIED
3 P2.003.02.0.00 THRUST PLATE 1 LOOSE
NOT SUPPLIED
4 P2.003.03.0.00 CAMGEAR 1 LOOSE
5 50.003.08.020 SET SCREW - M8X1.25X20 - 8.8 2

6
TITLE: - COVER FOR FUEL PUMP GEAR GROUP: - P2.121.2

6
1 5
4
3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 P2.121.05.0.00 COVER FOR FUEL PUMP GEAR 1
JOINT FOR FUEL
2 P2.121.03.0.00 1
PUMP GEAR COVER
3 50.003.08.022. SET SCREW - M8X1.25X22 - 8.8 4
4 50.506.08.000. PLAIN MACHINED WASHER - M8 4
PRECOATED CORE PLUG (FOR
5 34.001.36.0.00 1
MAIN OIL GALLERY FWE SIDE)
6 50.508.17.000. COPPER WASHER (18X24) 1

7
TITLE: - CRANKSHAFT GROUP: - P5.005

5
6

7
4
8

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
CRANKSHAFT ASSLY.
*1 P5.005.20.0.00 1 OF SR. NO. 2
WITH CR.GEAR &7,8
CONSISTING
CRANKSHAFT (EN9)
*2 03.913.20.0.00 1 OF SR. NO. 3
W/O 52 BORE DIA AT FWE TO 6
HA3 CRANKSHAFT FINISHED NOT SUPPLIED
3 03.005.08.0.00 1
EN 9 & SINGLE OIL HOLE LOOSE
NOT SUPPLIED
4 03.005.07.0.00 COUNTER WEIGHT-FINISHED 4
LOOSE
HARD WASHER
5 02.005.04.0.00 8
(13 I.D X 21O.D X 1.5 TH)
SOCKET HEAD BOLT -
6 04.005.12.0.00 8
M12X1.75X60 -10.9
7 P2.005.03.0.00 CRANKSHAFT GEAR 1
8 50.401.08.045. DOWEL PIN 8X45 1

8
TITLE: - CRANKSHAFT PULLEY GROUP: - P2.124.1

4
1

5
2
6

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 P2.124.01.0.00 CRANK SHAFT PULLEY 1
WASHER (FOR CRANK PULLEY
2 03.016.03.0.00 1
BOLT) - UPDATED
CRANK PULLEY BOLT-UPDATED
3 03.016.02.0.00 1
(110MM)
4 P5.079.01.0.00 BELT (SPAX 1220) 1
5 P2.124.02.0.00 MUD SLINGER 1
6 50.003.06.010. SET SCREW - M6X1X10 - 8.8 3

9
TITLE: - CYLINDER HEAD FOR
GROUP: - 3H.095.1
THREADED INJECTOR

24 4 16
15
23 28 31 5 15
13
22 29 14
26
21 29
17 3

11 6
12

20 19
25 27
30
8 7

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
CYLINDER HEAD ASSEMBLY
*1 3H.095.30.0.00 1 OF SR. NO.-
(COMPLETE) 2, 17 TO 26
CONSISTING
OF SR. NO.-
*2 3H.095.20.0.00 CYLINDER HEAD ASSEMBLY 1
3, 7 TO 9 &
13 TO 16
CONSISTING
OF SR. NO.-
CYLINDER HEAD
3 3H.095.01.0.00 1 4 TO 6
(FOR VCO NOZZLE) NOT SUPPLIED
LOOSE
CRANK SHAFT PLUG -
4 34.003.07.0.00 4
ALUMINIUM
5 34.003.08.0.00 WASHER FOR ALU.PLUG. 4
6 F6.001.58.0.00 SEALING CAP.(40 DIN 443) 4
VALVE SEAT INSERT
7 4H.007.03.9.00 3
(INLET)(SEMIFINISH)
8 4H.007.04.9.00 VALVE SEAT INSERT (EXHAUST) 3

10
TITLE: - CYLINDER HEAD FOR
GROUP: - 3H.095.1
THREADED INJECTOR

24 4 16
15
23 28 31 5 15
13
22 29 14
26
21 29
17 3

11 6
12

20 19
25 27
30
8 7

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
ASSEMBLY OF SEMIFINISH VALVE
*9 4H.007.39.0.00 6 OF SR. NO.-
GUIDE & SNAP RING 10
CONSISTING
ASSEMBLY OF SEMIFINISH VALVE
*10 4H.007.38.0.00 1 OF SR. NO.-
GUIDE & SNAP RING 11 & 12
11 4H.007.02.9.00 VALVE GUIDE ( SEMI-FINISH) 1
12 02.022.18.0.00 WIRE SNAP RING 1
13 50.010.08.120. STUD - M8X1.25X120 - 8.8 5
STUD - M8 X1.25 X 65 MM - 8.8
14 50.010.08.065. 1
GRADE
15 50.505.08.000. SPRING WASHER - M8 6
16 50.006.08.000. NUT- M8X1.25 - GR.8 6
17 06.631.02.0.00 VALVE SEAL 6
CONSISTING
*18 4H.007.40.0.00 INELT & EXHAUST VALVE PAIR 1 OF SR. NO.-
14 & 15
19 4H.007.05.0.00 INLET VALVE. 3
20 4H.007.06.0.00 EXHAUST VALVE. 3

11
TITLE: - CYLINDER HEAD FOR
GROUP: - 3H.095.1
THREADED INJECTOR

24 4 16
15
23 28 31 5 15
13
22 29 14
26
21 29
17 3

11 6
12

20 19
25 27
30
8 7

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

21 34.013.13.0.00 CUP FOR VALVE SPRING. 6
22 02.022.13.0.00 VALVE SPRING 6
23 02.022.11.0.00 VALVE CUP 6
24 02.022.12.0.00 VALVE COLLET 12
25 F6.001.58.0.00 SEALING CAP.(40 DIN 443) 1
26 50.010.10.070. STUD - M10X1.5X70 - 8.8 3
27 F6.001.58.0.00 SEALING CAP.(40 DIN 443) 1
28 4H.007.07.0.00 BOLT FOR CYLINDER HEAD. 14
29 02.022.06.0.00 WASHER 6
30 3H.009.06.0.00 GASKET FOR CYL.HEAD(1.22 MM) 1
31 50.006.10.000. NUT - M10X1.5 - GR.8 6

12
TITLE: -CYLINDER LINER. (105 DIA) GROUP: - 2H.008

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 2H.008.10.0.00 CYLINDER WITH `O’ RING 1 OF SR. NO.-
2 TO 4
CYLINDER LINER (105mm DIA.)A- NOT SUPPLIED
2 2H.008.01.0.00 1
GROUP LOOSE
3 2H.008.07.0.00 O RING (FOR CYL.LINER) 2
O RING FOR CYLINDER LINER
4 2H.008.11.0.00 1
(VITON MATERIAL)

13
TITLE: -DELIVERY BODY GROUP: - P2.028

2
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 P2.028.10.0.00 DELIVERY BODY ASSLY. 1
OF SR. NO.-2
2 2H.013.01.0.00 DELIVERY BODY (FINISH) 1
3 50.002.08.045 SET BOLT - M8X1.25X45 - 8.8 3
4 50.506.08.000. PLAIN MACHINED WASHER - M8 3
5 2H.013.11.0.00 JOINT FOR DELIVERY BODY. 1

14
TITLE: - DELIVERY TUBE GROUP: - P2.014

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
DELIVERY TUBE ASSLY.
*1 P2.014.10.0.00 1 OF SR. NO.
WITH O RING 2&3
2 P2.014.01.0.00 DELIVERY TUBE 1
3 2H.014.02.0.00 O RING (FOR DELIVERY TUBE) 2

15
TITLE: - DIPSTICK GROUP: - P5.078

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 P5.078.10.0.00 DIPSTICK ASSEMBLY 1
O RING - DIPSTICK (2X5,21515 OR
2 03.036.01.0.00 1
21511)

16
TITLE: - EXHAUST MANIFOLD GROUP: - P2.036.1

2
5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 P2.036.01.0.00 EXHAUST MANIFOLD 1
JONT FOR EXHAUST MANIFOLD
2 P5.036.02.0.00 3
(NON ASBESTOS)
3 4H.107.02.0.00 SPACER(FOR EXT.MANIFOLD) 6
SOCKET HEAD SCREW -
4 50.011.08.075. 6
M8X1.25X75 - 8.8
5 50.006.08.000. NUT- M8X1.25 - GR.8 2
JOINT FOR ADAPTOR ON
6 34.107.06.0.00 1
EX.MANIFOLD - SS MATERIAL
7 F6.377.11.0.00 STUD M8 (COPPER COATED) 2

17
TITLE: - FLYWHEEL ASSEMBLY (S/F ACE
GROUP: - 3H.021.1
TRACTOR)

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

FLYWHEEL ASSEMBLY (S/F ACE CONSISTING
*1 3H.021.20.0.PR 1
TRACTOR) OF SR.NO 2,3
2 P2.035.02.0.PR FLYWHEEL (S/F ACE TRACTOR) 1
STARTER RING 121 TEETH,
3 03.035.02.0.00 1
3.175 MODULE
BOLT FOR FLYWHEEL
4 04.024.02.0.00 10
(M10X45 LONG)

18
TITLE: - FLYWHEEL END FOOT (PACKING) GROUP: - 03.072

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 03.072.01.0.00 FLYWHEEL END FOOT(FIL.SIDE) 2
2 50.506.12.000. PLAIN MACHINED WASHER - M12 8
3 50.002.12.030. SET BOLT - M12X1.75X30 - 8.8 4
4 50.505.12.000. SPRING WASHER - M12 4

19
TITLE: - FLYWHEEL HOUSING
GROUP: - 3H.020.1
(S/F ACE TRACTOR)

1
10 7

3
5
8

9
6
11

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

FLYWHEEL HOUSING (S/F ACE
1 P5.075.02.0.PR 1
TRACTOR)
2 16.051.11.0.00 HOLLOW DOWEL 2
3 02.024.09.0.00 WASHER 12
4 50.052.10.050. SET BOLT-M10X50-10.9 2
5 50.052.10.040. SET BOLT-M10X40-10.9 10
6 50.506.08.000. PLAIN MACHINED WASHER - M8 4
7 P2.020.07.0.00 SPECIAL WASHER 2
8 50.602.18.000. CORE PLUG 1
9 50.508.17.000. COPPER WASHER (18X24) 1
10 P2.020.09.0.00 DEFLECTOR FOR OIL SEAL 1
11 50.003.08.030. SET SCREW - M8X1.25X30 - 8.8 4

20
TITLE: - FUEL FILTER MTG. AND FUEL PIPES GROUP: - P2.114

5 1

6 8

4 7

2
3 9 14
18

17
15 16
7
12

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

SEMI-FLEX FUEL PIPE(FEED TO
1 P2.114.01.0.00 1
FILTER)
SEMI-FLEX FUEL PIPE(FUEL
2 P2.114.02.0.00 1
FILTER TO FUEL PUMP)
FUEL FILTER MICO NO F 002 H20
3 38.226.03.0.00 105 WITH SEALING 1
WIRE(APPROVED DRG)
4 50.506.12.000. PLAIN MACHINED WASHER - M12 2
5 50.002.10.020. SET BOLT - M10X1.5X20 - 8.8 2
6 50.506.10.000. PLAIN MACHINED WASHER - M10 2
7 50.504.04.000. BANJO BOLT - M14X1.5 4
8 50.002.12.025. SET BOLT - M12X1.75X25 - 8.8 2
9 50.508.12.000. COPPER WASHER (14X20) 8
CONSISTING
*10 4H.031.20.0.00 CLAMP ASSLY FOR FUEL PIPES 1 OF SR. NO. 11,
18
CONSISTING
CLAMP ASSEMBLY(WITHOUT
*11 4H.031.30.0.00 1 OF SR. NO. 12,
RUBBER SLEEVE) 13 & 16, 17

21
TITLE: - FUEL FILTER MTG. AND FUEL PIPES GROUP: - P2.114

5 1

6 8

4 7

2
3 9 14
18

17
15 16
7
12

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

12 4H.031.06.0.00 CLAMP 1
CONSISTING
*13 4H.031.10.0.00 CLAMP SUB ASSLY 1 OF SR. NO. 14,
15
14 4H.031.06.0.00 CLAMP 1
15 50.006.06.000. NUT - M6X1 - GR.8 1
16 50.003.06.025. SET SCREW - M6X1X25 - 8.8 1
17 50.506.06.000. PLAIN MACHINED WASHER - M6 1
18 4H.031.07.0.00 RUBBER SLEEVE 2

22
TITLE: - FUEL PUMP (ACE TRACTOR) GROUP: - P2.059.2

6
3
6
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

FUEL PUMP FOR 3R1040 AGRIKING
1 3H.1007.01.0.00 TRACTOR APPLICATION (MICO 1
NO: E040237000/F002A0Z776)
JOINT FOR FUEL PUMP (NON
2 34.016.12.0.00 1
ASBESTOS)
L.O.SUPPLY HOSE (FIP) M10 BANJO
3 4H.006.01.0.00 1
ENDS X 235 L
SPECIAL BANJO BOLT(L.O.SUPPLY
4 03.660.07.0.00 1
TO PUMP)
5 34.023.06.0.00 BANJO BOLT 1
6 50.508.07.000. COPPER WASHER (10X14) 4

23
TITLE: - FUEL PUMP GEAR GROUP: - 2H.011

4 2

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 2H.011.01.0.00 FUEL PUMP GEAR (FINISH) 1
HUB FOR FUEL PUMP GEAR
2 2H.011.02.0.00 1
(FINISH)
3 50.003.08.025 SET SCREW - M8X1.25X25 - 8.8 3
4 34.017.05.0.00 WASHER FOR FUEL PUMP GEAR 3

24
TITLE: - GEAR CASING GROUP: - P2.101.1

12 19 2
28 14
18
13 17

16 1

6 22

20 23

29

24 4
3
21 6 5
26
8 15 27
11
25 10
9 7

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 P2.101.01.0.00 GEAR CASING FOR 3R860 WR 1
JOINT FOR GEAR CASING(3R
2 P2.101.02.0.00 1
860WR)
PRECOATED STUD (FOR FUEL
3 03.001.12.0.00 4
PUMP MOUNTING)
4 50.006.10.000. NUT - M10X1.5 - GR.8 4
5 03.001.25.0.00 WASHER(FOR FUEL PUMP MTG) 4
6 50.506.08.000. PLAIN MACHINED WASHER - M8 13
7 34.001.23.0.00 DOWEL FOR GEAR CASING 1
8 50.002.08.105. SET BOLT - M8X1.25X105 - 8.8 1
9 03.013.06.0.00 OIL SEAL (65X85X13)(CR MAKE) 1
10 50.508.33.000. COPPER WASHER (30X34) 1
11 P2.038.04.0.00 THREDED PLUG 1
12 P2.038.17.0.00 COVER PLATE 1
13 P2.038.18.0.00 SPACER 4
14 P2.075.03.0.00 JOINT 1
15 50.003.08.025. SET SCREW - M8X1.25X25 - 8.8 4
16 P2.075.04.0.00 JOINT 1

25
TITLE: - GEAR CASING GROUP: - P2.101.1

12 19 2
28 14
18
13 17

16 1

6 22

20 23

29

24 4
3
21 6 5
26
8 15 27
11
25 10
9 7

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

17 50.010.06.030. STUD - M6X1X30 - 8.8 4
18 50.506.06.000. PLAIN MACHINED WASHER - M6 4
19 50.006.06.000. NUT - M6X1 - GR.8 4
20 50.003.08.020. SET SCREW - M8X1.25X20 - 8.8 4
21 4H.001.05.0.00 SEALING CAP 1
22 F6.040.04.0.00 OIL FILLER CAP 1
SEALING WASHER (FOR OIL
23 F6.040.01.0.00 1
FILLING CAP)
24 P2.038.19.0.00 TIMING POINTER 1
25 50.003.08.016. SET SCREW - M8X1.25X16 - 8.8 2
MUD SLINGER S/F 4H.1295.01
26 4H.1295.02.0.00 1
CRANK PULLEY
27 50.003.06.010. SET SCREW - M6X1X10 - 8.8 2
28 T1.001.12.0.00 DOWEL DIA 18 (FEW) 1
29 P2.101.04.0.00 PERFORATED DISC 1

26
TITLE: - HIGH PRESSURE PIPE GROUP: - P2.093

7
2

3 9
8
4
5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 P2.093.50.0.00 H.P.PIPE COMPLETE SET 1 OF SR. NO. 2
TO 9
H.P.PIPE ASSEMBLY.BEND FOR
2 P2.093.20.0.00 1
CYL.1
H.P.PIPE ASSEMBLY.BEND FOR
3 P2.093.30.0.00 1
CYL.2
H.P.PIPE ASSEMBLY.BEND FOR
4 P2.093.40.0.00 1
CYL.3
5 50.541.01.000. PIPE CLIP (FOR 2 PIPES) 1
6 50.541.02.000. PIPE CLIP. (FOR 3 PIPES) 1
7 02.036.03.0.00 RUBBER SLEEVE 5
8 50.003.06.012. SET SCREW - M6X1X12 - 8.8 2
9 50.006.06.000. NUT - M6X1 - GR.8 2

27
TITLE: - HYDRAULIC PUMP MOUNTING GROUP: - P2.040

8
6

4
7
5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
LIVE HYDRAULICS
*1 P2.040.10.0.00 1 OF SR. NO.
ARRANGEMENT 2, 8 & 9
CONSISTING
DRIVE SHAFT, SPACER AND
*2 P2.040.30.0.00 1 OF SR. NO.
BEARING SUB.ASSLY. 3, 6 & 7
CONSISTING
*3 47.307.20.0.00 DRIVE SHAFT ASSEMBLY 1 OF SR. NO.
4&5
4 47.307.02.0.00 DRIVE SHAFT 1
5 47.307.03.0.00 THREADED BUSH 1
6 47.307.04.0.00 SPACER 1
7 P2.040.01.0.00 GEAR - Z37 1
BEARING FOR HYD.GEAR
8 47.307.05.0.00 2
(FAG6006)
9 50.502.55.000. CIRCLIP INTERNAL - 55 MM 1

28
TITLE: - INJECTOR (R1040 EU COMSTAGE II)
GROUP: - 4H.376.20
MICO PART NUMBER (E 080 1439 00)

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

INJECTOR (4R1040 TAL HM) MICO
1 4H.376.03.0.00 PART NO. B433 389 392(17.5% HE 1
SPECIAL NOZZLE)

29
TITLE: - INLET MANIFOLD (3R TA) GROUP: - 3H.502.1

7
6

1 3

5
2

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 3H.502.01.0.PR INLET MANIFOLD 1
2 3H.015.11.0.00 JOINT FOR AIR INLET MANIFOLD 1
3 50.002.08.085. SET BOLT - M8X1.25X85 - 8.8 3
4 50.002.08.070. SET BOLT - M8X1.25X70 - 8.8 3
5 50.506.08.000. PLAIN MACHINED WASHER - M8 6
CORE PLUG HEXAGONAL
6 50.610.22.000. 1
SOCKET HEAD(M22x1.5)
7 50.508.23.000. COPPER WASHER (22X27) 1

30
TITLE: - INTERMEDIATE GEAR ASSLY GROUP: - P2.088.1

4
7

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 P2.004.10.0.00 INTER GEAR WITH BUSH 1 OF SR. NO.
2&3
NOT SUPPLIED
2 P2.004.05.0.00 INTERMEDIATE GEAR 1 LOOSE
3 P2.004.02.0.00 BUSH 1
4 P2.004.03.0.00 INTERMEDIATE GEAR SUPPORT 1
RETAINING PLATE (FOR
5 P2.004.08.0.PR 1
INTERMEDIATE GEAR)
6 50.002.08.070. SET BOLT - M8X1.25X70 - 8.8 2
7 50.002.08.080. SET BOLT - M8X1.25X80 - 8.8 1

31
TITLE: - LEAK OFF PIPE GROUP: - P2.127

2
3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 P2.127.10.0.00 LEAK OFF PIPE SUB ASSEMBLY 1
2 50.508.05.000. COPPER WASHER (8X12) 6
3 03.027.04.0.00 BANJO BOLT 3

32
TITLE: - LIFTING HOOK GROUP: - P5.013.1

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 P5.013.02.0.00 LIFTING HOOK 2
2 50.002.10.030. SET BOLT - M10X1.5X30 - 8.8 4
3 50.506.10.000. PLAIN MACHINED WASHER - M10 4

33
TITLE: - LUB OIL COOLER GROUP: - P4.041

5 5
4

2
4

7
6

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

WATER PIPE (FROM CRANKCASE
1 P4.041.02.0.00 1
TO OIL COOLER)
2 P4.041.01.0.00 LUB OIL COOLER 1
WATER PIPE (FROM OIL COOLER
3 P4.041.03.0.00 1
TO CRANKCASE)
4 50.504.06.000. BANJO BOLT - M18X1.5 2
5 50.508.17.000. COPPER WASHER (18X24) 4
ADAPTOR (FOR SPIN-ON TYPE
6 P2.118.02.0.00 1
FILTER)
7 50.519.04.000. WORM DRIVE HOSE CLIP (25 MM) 2

34
TITLE: - LUB OIL FILTER ASSEMBLY GROUP: - P2.116

3 4

6
10
5

2 8
8

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 P2.116.30.0.00 HEADER ASSEMBLY 1 OF SR. NO.-
2 TO 9
2 P2.118.01.0.00 HEADER (FOR SPIN-ON FITER) 1
HEADLESS PIPE PLUG 1/2"-14
3 50.056.06.000. 1
NPTF
4 50.056.03.000. HEADLESS PIPE PLUG 1/4"-18 NPTF 1
5 50.508.08.000. COPPER WASHER (10X16) 1
SPIN ON FILTER FOR
6 04.270.01.0.00 1
LUBRICATING OIL
7 50.003.08.035. SET SCREW - M8X1.25X35 - 8.8 1
8 50.003.08.075. SET SCREW - M8X1.25X75 - 8.8 3
9 50.003.08.055. SET SCREW - M8X1.25X55 - 8.8 2
10 T1.036.02.0.00 JOINT ( L.O.HEADER) 1

35
TITLE: - LUB OIL PUMP GROUP: - P2.005

13

19

6
20 17 15

4
10 12 14
16
11
5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 P2.005.30.0.00 LUB. OIL PUMP ASSEMBLY 1
OF SR. NO. 2,9
CONSISTING
*2 P2.005.10.0.00 LUB OIL PUMP ASSLY. 1 OF SR. NO. 3 &
6 TO 8,
CONSISTING
*3 3H.005.40.0.00 ROTOR SUB ASSLY.(W/O KEY) 1 OF SR. NO. 4,5
NOT SUPPLIED
4 03.010.22.0.00 INNER ROTOR 1 LOOSE
NOT SUPPLIED
5 03.010.23.0.00 SHAFT FOR INNER ROTOR 1
LOOSE
NOT SUPPLIED
6 03.010.17.0.00 OUTER ROTOR 1 LOOSE
7 50.002.08.080. SET BOLT - M8X1.25X80 - 8.8 2
8 50.506.08.000. PLAIN MACHINED WASHER - M8 2
CONSISTING
*9 P2.005.90.0.00 LUB OIL PUMP KIT 1 OF SR. NO. 10
TO 18
NOT SUPPLIED
10 P2.005.02.0.00 COVER PLATE 1
LOOSE

36
TITLE: - LUB OIL PUMP GROUP: - P2.005

13

19

6
20 17 15

4
10 12 14
16
11
5

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

COUNTER SUNK SOCKET HEAD
11 06.010.01.0.00 2
SCREW.
12 03.010.11.0.00 O RING - L.O.PUMP (1.57X65,21508) 1
13 03.010.04.0.00 L.O. PUMP DRIVING GEAR 1
14 03.010.14.0.00 SPRING FOR RELIEF VALVE 1
15 03.010.13.0.00 RELIEF VALVE 1
16 03.010.15.0.00 CUP FOR SPRING 1
17 50.036.07.010. SPLIT COTTER PIN - 1/8"X1-1/2" 1
CONSISTING
LUB OIL PUMP BODY AND BUSH
*18 P2.005.20.0.00 1 OF SR. NO. 18,
ASSLY 19
NOT SUPPLIED
19 P2.005.01.0.00 LUB OIL PUMP BODY 1 LOOSE
NOT SUPPLIED
20 03.010.05.0.00 BUSH FOR L.O.PUMP BODY 1 LOOSE

37
TITLE: - LUB. OIL SUMP GROUP: - P5.076.1

4 3

3
5
2

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 P5.076.01.0.00 LUB. OIL SUMP 1
2 50.003.08.045. SET SCREW - M8X1.25X45 - 8.8 14
3 50.506.08.000. PLAIN MACHINED WASHER - M8 19
4 50.003.08.060. SET SCREW - M8X1.25X60 - 8.8 2
5 50.002.08.125. SET BOLT - M8X1.25X125 - 8.8 3

38
TITLE: - MONOBLOCK CRANKCASE GROUP: - P2.100

33
5

8 6 23 13
26 24
27
7
32
17 31
25
22
29
19
18 21
16
10
9
28 15

14 20 30 11
34 12

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 P2.100.10.0.00 CRANKCASE W/O BEARINGS 1 OF SR. NO.-
2, 22 TO 27
CONSISTING
MONOBLOCK CRANKCASE AND
*2 P2.100.20.0.00 1 OF SR. NO.-
BEARING CAP ASSLY. 3 & 21
CONSISTING
MONOBLOCK CRANKCASE WITH
*3 P2.100.30.0.00 1 OF SR. NO.-
BEARING CAP 4, 17 TO 20
CONSISTING
MONOBLOCK CRANKCASE (LINE
*4 P2.100.40.0.00 1 OF SR. NO.-
BEARING OPERATION) 5 TO 16
NOT SUPPLIED
5 P2.100.01.0.PR CRANK CASE FOR 3R860 WR 1 LOOSE
6 F6.007.34.0.00 SEALING CAP 5
7 F6.001.58.0.00 SEALING CAP.(40 DIN 443) 2
8 4H.001.05.0.00 SEALING CAP 2
CRANK SHAFT PLUG -
9 34.003.07.0.00 2
ALUMINIUM
10 34.003.08.0.00 WASHER FOR ALU.PLUG. 2

39
TITLE: - MONOBLOCK CRANKCASE GROUP: - P2.100

33
5

8 6 23 13
26 24
27
7
32
17 31
25
22
29
19
18 21
16
10
9
28 15

14 20 30 11
34 12

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

MAIN BEARING CAP - (FWE) NOT SUPPLIED
11 P2.001.23.0.00 1
FINISH LOOSE
NOT SUPPLIED
12 P2.001.24.0.00 MAIN BEARING CAP (GE) - FINISH 3 LOOSE
13 50.609.25.000. CORE PLUG (DISH TYPE) 52 DIA 1
BOLT FOR MB CAP(HEX HEAD)
14 03.001.22.0.00 8
M14X2X128
15 02.001.04.0.00 SPECIAL WASHER FOR M14 BOLT 8
16 B2.005.16.0.00 HOLLOW DOWEL(M.B.CAP) 8
PRECOATED PLUG (FOR OIL
17 34.001.35.0.00 1
GALLERY)
18 50.508.08.000. COPPER WASHER (10X16) 1
19 50.610.10.000. CORE PLUG 1
20 P2.001.02.0.00 GALLARY PLUG 1
21 02.037.04.0.00 DIPSTICK GUIDE 1
22 03.001.04.0.00 CAM BUSH 1
23 04.001.08.0.00 PRECOATED SCREW PLUG 1
24 50.508.18.000. COPPER WASHER (20X24) 1
25 03.001.07.0.00 SLOTTED PIN 4

40
TITLE: - MONOBLOCK CRANKCASE GROUP: - P2.100

33
5

8 6 23 13
26 24
27
7
32
17 31
25
22
29
19
18 21
16
10
9
28 15

14 20 30 11
34 12

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

26 4H.001.22.0.00 PRECOATED PLUG 4
27 50.508.09.000. COPPER WASHER (12X16) 4
28 02.001.07.0.00 MAIN BRG TOP & BOTTOM 4
THRUST RING PAIR-DRIVE
29 03.001.18.0.00 1
END,102 DIA.)
30 B2.005.22.0.00 THRUST RING PAIR-G.E. 1
31 50.602.14.000. PLUG (M14X1.5) 1
32 50.508.11.000. COPPER WASHER (14X18) 1
33 50.401.08.014. DOWEL 2
34 3H.001.02.0.00 STUD(FOR FRONT AXLE SUPPORT) 6

41
TITLE: - MOUNTING FOR 12V ALTERNATOR GROUP: - P5.046.2

3
6
10

11

5
8
9

2
10

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 P5.046.40.0.00 ALTERNATOR MOUNTING 1 OF SR. NO. 2
TO 11
2 P5.046.02.0.00 ALTERNATOR MTG. BRACKET 1
3 P5.046.03.0.00 SPACER BOLT 1
4 P5.046.01.0.00 TENSION ADJUSTING LEVER 1
5 50.006.10.000. NUT - M10X1.5 - GR.8 1
6 50.506.08.000. PLAIN MACHINED WASHER - M8 1
7 F6.606.04.0.00 WASHER FOR AXUAL ALIGNMENT 1
DOWEL BOLT FOR ALTERNATOR -
8 48.067.03.0.00 1
M10 X 130 LG
BUSH FOR ALTERNATOR (IN
9 48.067.04.0.00 1
BRACKET)
10 50.002.08.016. SET BOLT - M8X1.25X16 - 8.8 5
PULLEY ALTERNATOR ( 84.3 PCD,
11 4H.044.05.0.00 1
S/F ECEL - 6H.2117)

42
TITLE: - OIL SEAL HOUSING GROUP: - P2.129.3

3
2

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 2H.006.01.0.00 OIL SEAL HSG.(F.W.E.) 1
2 50.003.08.020. SET SCREW - M8X1.25X20 - 8.8 10
3 50.506.08.000. PLAIN MACHINED WASHER - M8 10
4 03.007.06.0.00 OIL SEAL(115X140X12) CR MAKE 1
5 50.401.05.012. DOWEL 2
PLATE WITH RUBBER MOULDING
6 2H.039.10.0.00 1
(FOR FWE OIL SEAL HSG.)

43
TITLE: - PISTON AND CONNECTING ROD
GROUP: - 4H.1502
ASSEMBLY R1040NA (CMVR STAGE-II)

13
15

9 17

14
10

16

5
4 6

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
OF SR. NO.
PISTON & CON.ROD ASSEMBLY
*1 4H.1502.40.0.00 1 2 & 11
R1040NA (CMVR STAGE-II) NOT SUPPLIED
ASSEMBLY
CONSISTING
PISTON ASSEMBLY -COMPLETE
*2 4H.1502.10.0.00 1 OF SR. NO.
R1040NA (CMVER STAGE-II) 3&7
CONSISTING
PISTON WITH PIN AND CIRCLIP
*3 4H.1502.20.0.00 1 OF SR. NO.
R1040NA (CMVR STAGE-II) 4 TO 6
PISTON 105 DIA, B1 CAVITY FOR
NOT SUPPLIED
4 3H.106.08.0.00 CMVR STAGE II (SUPPLIER DWG 1
LOOSE
NO RD/PT/OT-H37)
5 34.025.24.0.00 PISTON PIN 1
6 50.502.35.000. CIRCLIP (INTERNAL)-35 MM 2
CONSISTING
PISTON RING SET (SUITABLE FOR
*7 2H.009.55.0.00 1 OF SR. NO.
WT) 8 TO 10

44
TITLE: - PISTON AND CONNECTING ROD
GROUP: - 4H.1502
ASSEMBLY R1040NA (CMVR STAGE-II)

13
15

9 17

14
10

16

5
4 6

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

TOP RING 105DIA ( CHROME
NOT SUPPLIED
8 2H.009.07.0.00 INLAID KEY STONE RING FOR WT 1
LOOSE
PISTONS)
NOT SUPPLIED
9 2H.009.03.0.00 COMPRESSION RING (105 DIA) 1 LOOSE
OIL CONTROL RING 105 DIA
NOT SUPPLIED
10 2H.009.09.0.00 (CHROME CONFIRMABLE OIL 1 LOOSE
CONTROL RING FOR WT PISTONS )
CONSISTING
*11 04.685.10.0.00 CONNECTING ROD ASSEMBLY 1 OF SR. NO.
12
CONSISTING
CON ROD ASSEMBLY (WITHOUT
*12 04.685.20.0.00 1 OF SR. NO.
LE BEARING) 13 TO 16
CONNECTING ROD (DREAM NOT SUPPLIED
13 04.685.01.0.00 1
PROJECT) MACHINING LOOSE
14 04.692.03.0.00 CONNECTING ROD BOLT 2
15 02.021.03.9.00 SMALL END BUSH (S/F) 1

45
TITLE: - PISTON AND CONNECTING ROD
GROUP: - 4H.1502
ASSEMBLY R1040NA (CMVR STAGE-II)

13
15

9 17

14
10

16

5
4 6

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

16 50.401.07.010. DOWEL PIN 2
CONNECTING ROD BIG END NOT SUPPLIED
17 04.685.02.0.00 2
BEARING(NA) LOOSE

46
TITLE: - PUSHROD & TAPPETS GROUP: - 2H.007

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 02.024.70.0.00 PUSH ROD (WELDED) 2
2 02.024.01.0.00 VALVE TAPPET 2

47
TITLE: - ROCKER COVER FOR GODREJ GROUP: - 3H.190.1

12 6
13
14 7

2
14
15

11
9
8

3
5

4
7
10

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
ROCKER COVER ASSEMBLY WITH
*1 3H.190.20.0.00 1 OF SR. NO.-
BREATHER ADAPTOR 2 TO 11
2 3H.190.01.0.00 ROCKER COVER 1
3 4H.139.02.0.00 DEFLECTOR PLATE 1
4 10.046.02.0.00 P K DRIVE SCREW 1/8"X3/8" (RIVET) 4
5 3H.049.30.0.00 BREATHER TUBE ASSEMBLY 1
6 50.002.08.016. SET BOLT - M8X1.25X16 - 8.8 2
7 50.506.08.000. PLAIN MACHINED WASHER - M8 4
8 P5.043.02.0.00 ADAPTOR FOR BREATHER PIPE 1
9 3H.043.03.0.00 JOINT FOR ADAPTOR(PTL) 1
10 50.003.08.045. SET SCREW - M8X1.25X45 - 8.8 2
O RING - P.R.FERRULE
11 42.004.22.0.00 2
(2.7X18,21509)
12 50.002.08.095. SET BOLT - M8X1.25X95 - 8.8 3
13 50.002.08.070. SET BOLT - M8X1.25X70 - 8.8 3
14 50.506.08.000. PLAIN MACHINED WASHER - M8 6
15 3H.014.11.0.00 JOINT FOR ROCKER COVER 1

48
TITLE: - SUCTION TUBE GROUP: - P5.077

5
4
6

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 P5.077.20.0.00 SUCTION TUBE ASSEMBLY 1 OF SR. NO. 2
TO 6
2 P5.077.10.0.00 SUCTION TUBE SUB ASSEMBLY 1
3 03.011.04.0.00 CLIP FOR PIPE 1
4 50.003.06.014. SET SCREW - M6X1X14 - 8.8 2
5 50.006.06.000. NUT - M6X1 - GR.8 2
6 50.505.06.000. SPRING WASHER - M6 2
7 50.003.08.016. SET SCREW - M8X1.25X16 - 8.8 2
8 50.506.08.000. PLAIN MACHINED WASHER - M8 2

49
TITLE: - SUMP DRAIN ARRANGEMENT GROUP: - 2H.035

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 2H.035.20.0.00 PLUG WITH MAGNET & 'O'RING. 1 OF SR. NO. 1 &
2
2 2H.035.10.0.00 DRAIN PLUG ASSEMBLY. 1
3 F6.024.47.0.00 O’ RING 1

50
TITLE: - THERMOSTAT HOUSING
GROUP: - P2.066.4
ARRANGEMENT

3 11
5
16
7
4
8
15

16

6
10
2
9 7

12

13
14

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
THERMOSTAT HSG ASSEMBLY
*1 P2.066.30.0.00 1 OF SR. NO.
AGRI KING TRACTORS 2 TO 11
2 P2.066.01.0.00 THERMOSTAT HOUSING 1
THERMOSTAT ELEMENT(74 DEG) -
3 39.040.09.0.00 1
WTIL NO.DEV358
4 4H.053.12.0.00 JOINT FOR THERMOSTAT COVER 1
5 3H.066.02.0.00 THERMOSTAT COVER, PTL 1
6 50.003.08.025. SET SCREW - M8X1.25X25 - 8.8 2
7 50.506.08.000. PLAIN MACHINED WASHER - M8 4
8 50.010.08.025. STUD - M8X1.25X025 - 8.8 2
9 50.602.18.000. CORE PLUG 2
10 50.508.17.000. COPPER WASHER (18X24) 2
11 50.006.08.000. NUT- M8X1.25 - GR.8 2
JOINT FOR THERMOSTAT
12 4H.053.11.0.00 1
HOUSING
13 50.003.08.050. SET SCREW - M8X1.25X50 - 8.8 4
14 50.506.08.000. PLAIN MACHINED WASHER - M8 4
15 4H.023.02.0.00 THERMOSTAT BYPASS HOSE 1

51
TITLE: - THERMOSTAT HOUSING
GROUP: - P2.066.4
ARRANGEMENT

3 11
5
16
7
4
8
15

16

6
10
2
9 7

12

13
14

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

WORM DRIVE CLAMP ( JUPITOR
16 2H.112.02.0.00 2
JW7B13, 29 TO 45 DIA)

52
TITLE: - TRANSPORTATION FEET GROUP: - P5.016

1
5
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

1 P5.016.01.0.00 GEAR END FOOT (RH) 1
2 P5.016.02.0.00 GEAR END FOOT (LH) 1
3 50.506.12.000. PLAIN MACHINED WASHER - M12 4
4 50.007.16.000. NUT - M16X1.5 - GR.8 4
5 50.506.16.000. PLAIN MACHINED WASHER - M16 4

53
TITLE: -VALVE ROCKER ASSLY GROUP: - P2.010

6 7
19
14

18 11
6
17 14
18
11 6 15
8 9
17 15
14
10
14 14
8
14
4
16
10 5
6
7 3
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
VALVE ROCKER ASSLY.
*1 P2.010.10.0.00 1 OF SR. NO.-
(COMPLETE) 2, 6 TO 12
CONSISTING
VALVE ROCKER SHAFT SUB
*2 P2.010.20.0.00 1 OF SR. NO.-
ASSLY. 3 TO 5
3 P2.010.04.0.00 ROCKER SHAFT 1
SOCKET HEAD GRUB SCREW -
4 50.022.12.010. 2
M12X10
5 4H.008.04.0.00 GROOVED SOCKET PIN 1
6 2H.022.04.0.00 WASHER (FOR ROCKER ARM) 6
7 50.513.15.000. E TYPE CIRCLIP-EXTERNAL (15DIA.) 2
8 2H.022.03.0.00 SPRING FOR ROCKER SHAFT. 2
9 P2.010.01.0.00 ROCKER SUPPORT FLYWHEEL END 1
10 P2.010.02.0.00 ROCKER SUPPORT 2
11 50.003.08.030. SET SCREW - M8X1.25X30 - 8.8 2
CONSISTING
*12 02.024.20.0.00 VALVE ROCKER ASSLY 6 OF SR. NO.-
12, 16 TO 19

54
TITLE: -VALVE ROCKER ASSLY GROUP: - P2.010

6 7
19
14

18 11
6
17 14
18
11 6 15
8 9
17 15
14
10
14 14
8
14
4
16
10 5
6
7 3
4

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
OF SR. NO.-
ROCKER ARM SUB ASSEMBLY
*13 02.024.23.0.00 1 14 & 15
(WITH VR BUSH) NOT SUPPLIED
LOOSE
NOT SUPPLIED
14 02.024.11.0.00 ROCKER ARM 1 LOOSE
NOT SUPPLIED
15 02.024.12.9.00 V.R. BUSH (SEMI FINISH) 1 LOOSE
NOT SUPPLIED
16 02.024.15.0.00 V.R.TOE 1 LOOSE
17 02.024.13.0.00 ROCKER-ARM ADJ. SCREW 1
18 02.024.27.0.00 NUT FOR ROCKER ADJ.SCREW 1
19 02.024.14.0.00 OIL METERING SCREW 1

55
TITLE: - WATER PUMP GROUP: - P2.021.1

9 7
12

5
4
3
8

6
2
11
10

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
WATER PUMP ASSLY.WITH
*1 P2.021.10.0.00 1 OF SR. NO.-
PULLEY 2 TO 11
WATER PUMP HOUSING (93 DIA
2 P2.021.01.0.00 1
IMPELLER)
3 P2.021.02.0.00 IMPELLER 93 DIA 1
4 P2.021.05.0.00 BLANKING PLATE 1
5 P2.021.04.0.00 O RING 1
6 P2.021.03.0.00 O RING 1
7 P2.021.06.0.00 SPINDLE BEARING 1
8 P2.021.07.0.00 UNTIZED SEAL 1
9 P2.021.08.0.00 WATER PUMP PULLEY 1
10 50.003.10.055. SET SCREW - M10X1.5X55 - 8.8 5
11 50.506.10.000. PLAIN MACHINED WASHER - M10 5
12 P2.021.11.0.00 SPACER (FOR FAN) 1

56
TITLE: - WATER SEPERATOR
GROUP: - P2.115
MTG.ARRANGEMENT

5 2

6
3

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

SEALED WATER SAPARATOR
1 47.277.10.0.00 1
ASSLY.(APPROVED DRG)
2 50.002.12.020. SET BOLT - M12X1.75X20 - 8.8 2
3 50.506.12.000. PLAIN MACHINED WASHER - M12 2
SEMI-FLEX PIPE(WATER
4 P2.115.01.0.00 1
SEPERATOR TO FUEL PUMP)
5 50.504.04.000. BANJO BOLT - M14X1.5 2
6 50.508.11.000. COPPER WASHER (14X18) 4

57
TITLE: -SET OF JOINTS, COPPER WASHERS &
GROUP: -
'O' RINGS (3H.2123)

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

CONSISTING
*1 3H.401.93.0.00 SET OF JOINTS 1 OF SR.NO. 2 TO
17
*2 2H.013.11.0.00 JOINT FOR DELIVERY BODY 1
JOINT FOR FUEL PUMP (NON
*3 34.016.12.0.00 1
ASBESTOS)
JOINT FOR ADAPTOR ON
*4 34.107.06.0.00 1
EX.MANIFOLD - SS MATERIAL
*5 3H.009.06.0.00 GASKET FOR CYL.HEAD(1.22 MM) 1
*6 3H.014.11.0.00 JOINT FOR ROCKER COVER 1
*7 3H.015.11.0.00 JOINT FOR AIR INLET MANIFOLD 1
*8 3H.043.03.0.00 JOINT FOR ADAPTOR(PTL) 2
*9 3H.506.06.0.PR JOINT FOR AIR PIPE 1
JOINT FOR THERMOSTAT
*10 4H.053.11.0.00 1
HOUSING
*11 4H.053.12.0.00 JOINT FOR THERMOSTAT COVER 1
*12 P2.075.03.0.00 JOINT 1
*13 P2.075.04.0.00 JOINT 1

58
TITLE: -SET OF JOINTS, COPPER WASHERS &
GROUP: -
'O' RINGS (3H.2123)

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

JOINT FOR GEAR CASING(3R
*14 P2.101.02.0.00 1
860WR)
JOINT FOR FUEL PUMP GEAR
*15 P2.121.03.0.00 1
COVER
JOINT FOR EXHAUST MANIFOLD
*16 P5.036.02.0.00 3
(NON ASBESTOS)
*17 T1.036.02.0.00 JOINT ( L.O.HEADER) 1
CONSISTING
*18 3H.401.94.0.00 SET OF COPPER WASHERS 1 OF SR.NO. 19
TO 29
*19 50.508.05.000. COPPER WASHER (8X12) 6
*20 50.508.07.000. COPPER WASHER (10X14) 4
*21 50.508.08.000. COPPER WASHER (10X16) 2
*22 50.508.09.000. COPPER WASHER (12X16) 4
*23 50.508.11.000. COPPER WASHER (14X18) 5
*24 50.508.12.000. COPPER WASHER (14X20) 8
*25 50.508.17.000. COPPER WASHER (18X24) 8
*26 50.508.18.000. COPPER WASHER (20X24) 1
*27 50.508.23.000. COPPER WASHER (22X27) 1

59
TITLE: -SET OF JOINTS, COPPER WASHERS &
GROUP: -
'O' RINGS (3H.2123)

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

*28 50.508.33.000. COPPER WASHER (30X34) 1
SEALING WASHER (FOR OIL
*29 F6.040.01.0.00 1
FILLING CAP)
CONSISTING
*30 3H.401.95.0.00 SET OF 'O' RINGS 1 OF SR.NO. 31
TO 39
*31 03.010.11.0.00 O RING - L.O.PUMP (1.57X65,21508) 1
O RING - DIPSTICK
*32 03.036.01.0.00 1
(2X5,21515 OR 21511)
*33 2H.008.07.0.00 O RING (FOR CYL.LINER) 6
O RING FOR CYLINDER LINER
*34 2H.008.11.0.00 3
(VITON MATERIAL)
*35 2H.014.02.0.00 O RING(FOR DELIVERY TUBE) 2
O RING - P.R.FERRULE
*36 42.004.22.0.00 3
(2.7X18,21509)
*37 F6.024.47.0.00 O - RING FOR DRAIN PLUG 1
*38 P2.021.03.0.00 O RING 1
*39 P2.021.04.0.00 O RING 1

60
TITLE: - SET OF BEARINGS (HA 03 & 3H)

SR.NO. PART NO. DESCRIPTION QTY. REMARKS

SET OF MAIN BEARINGS
*1 M.073.4.00.003 MAIN BEARING HA STD. 1 (4 PAIRS) STD.
*2 M.073.4.00.013 MAIN BEARING HA 1 0.25mm U/S
*3 M.073.4.00.023 MAIN BEARING HA 1 0.50mm U/S
*4 M.073.4.00.033 MAIN BEARING HA 1 0.75mm U/S
*5 M.073.4.00.043 MAIN BEARING HA 1 1.00mm U/S
*6 M.073.4.00.053 MAIN BEARING HA 1 1.25mm U/S
*7 M.073.4.00.063 MAIN BEARING HA 1 1.50mm U/S
SET OF CONROD BEARINGS
*8 B.073.4.00.003 CONROD BEARING HA STD. 1 (3 PAIRS) STD.
*9 B.073.4.00.013 CONROD BEARING HA 1 0.25mm U/S
*10 B.073.4.00.023 CONROD BEARING HA 1 0.50mm U/S
*11 B.073.4.00.033 CONROD BEARING HA 1 0.75mm U/S
*12 B.073.4.00.043 CONROD BEARING HA 1 1.00mm U/S
*13 B.073.4.00.053 CONROD BEARING HA 1 1.25mm U/S
*14 B.073.4.00.063 CONROD BEARING HA 1 1.50mm U/S
SET OF THRUST WASHERS
THRUST WASHER SET KHD
*15 W.073.7.00.003 1 ONE SET
(2 TOP+ 2 BOTTOM)- 4 N0S)

61