Scribd Logo
Upload

Welcome to Scribd!

  • 59 views

    Toray TML20D L

    Uploaded by

    Eber said
    1. This document provides specifications for various brackish water reverse osmosis membrane elements from Lenntech, including the TML20D series. 2. The membranes have a composite polyamide structure, salt rejection rates over 99.65%, and product flow rates ranging from 7,800 to 11,500 gallons per day depending on the model. 3. Operating conditions and limitations are outlined, such as a maximum feed water temperature of 113°F and chlorine concentration below 0.1 ppm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Toray TML20D L

    Uploaded by

    Eber said
    59 views2 pages
    1. This document provides specifications for various brackish water reverse osmosis membrane elements from Lenntech, including the TML20D series. 2. The membranes have a composite polyamide structure, salt rejection rates over 99.65%, and product flow rates ranging from 7,800 to 11,500 gallons per day depending on the model. 3. Operating conditions and limitations are outlined, such as a maximum feed water temperature of 113°F and chlorine concentration below 0.1 ppm.

    Original Description:

    Membranas toray

    Original Title

    Toray-TML20D-L

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. This document provides specifications for various brackish water reverse osmosis membrane elements from Lenntech, including the TML20D series. 2. The membranes have a composite polyamide structure, salt rejection rates over 99.65%, and product flow rates ranging from 7,800 to 11,500 gallons per day depending on the model. 3. Operating conditions and limitations are outlined, such as a maximum feed water temperature of 113°F and chlorine concentration below 0.1 ppm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    59 views2 pages

    Toray TML20D L

    Uploaded by

    Eber said
    1. This document provides specifications for various brackish water reverse osmosis membrane elements from Lenntech, including the TML20D series. 2. The membranes have a composite polyamide structure, salt rejection rates over 99.65%, and product flow rates ranging from 7,800 to 11,500 gallons per day depending on the model. 3. Operating conditions and limitations are outlined, such as a maximum feed water temperature of 113°F and chlorine concentration below 0.1 ppm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Lenntech

    [email protected] Tel. +31-152-610-900


    www.lenntech.com Fax. +31-152-616-289

    Brackish Water RO Elements


    TML20D
    Type Diameter Membrane Area Salt Rejection Product Flow Feed Spacer
    Inch ft2(m2) % Rate Thickness
    gpd(m3/d) mil

    TML20D-370 8” 370(34) 99.8 9,700(36.7) 34


    TML20D-400 8” 400(37) 99.8 10,500(39.8) 34
    TML20DA400 8” 400(37) 99.8 10,500(39.8) 31
    TML20D-440 8” 440(41) 99.8 11,500(43.6) 28

    1. Membrane Type Cross Linked Fully Aromatic Polyamide Composite

    2. Test Conditions
    Feed Water Pressure 225 psi(1.55 MPa)
    Feed Water Temperature 77 °F(25 ℃)
    Feed Water Concentration 2,000 mg/l NaCl
    Recovery Rate 15 %
    Feed Water pH 7
    3. Minimum Salt Rejection 99.65 %
    4. Minimum Product Flow Rate 7,800 gpd(29.5 m3/d)
    8,400 gpd(31.8 m3/d)
    8,400 gpd(31.8 m3/d)
    9,200 gpd(37.4 m3/d)

    Dimensions

    All dimensions shown in Inches (millimeter).

    F Feed Water

    B Concentrated Brine

    Flow direction

    TML20D-370
    F B
    1.125(29)

    TML20D-400
    7.9(201)

    PERMIATE
    TML20DA400 F
    B
    TML20D-440

    40(1,016)
    Operating Limits

    Maximum Operating Pressure 600psi (4.1 MPa)


    Maximum Feed Water Temperature 113°F (45℃)
    Maximum Feed Water SDI15 5
    Feed Water Chlorine Concentration <0.1ppm
    Feed Water pH Range, Continuous Operation 2-11
    Feed Water pH Range, Chemical Cleaning 1-13
    Maximum Pressure Drop per Element 20psi (0.14 MPa)
    Maximum Pressure Drop per Vessel 60psi (0.4 MPa)

    Operating Information
    1. For the recommended design range, please consult the latest Toray technical bulletin, design guide
    lines, computer design program, and/ or call an application specialist. If the operating limits given in
    this Product Information Bulletin are not strictly followed, the Limited Warranty will be null and void.
    2. All elements are wet tested, treated with a 1% by weight percent sodium bisulfite storage solution,
    and then vacuum packed in oxygen barrier bags, or treated with tested feed water solution, and then
    vacuum packed in oxygen barrier bags with deoxidant inside. To prevent biological growth during
    short term storage, shipment, or system shutdown, it is recommended that Toray elements be
    immersed in a protective solution containing 500 - 1,000 ppm of sodium bisulfite (food grade)
    dissolved in permeate.
    3. The presence of free chlorine and other oxidizing agents under certain conditions, such as heavy
    metals which acts as oxidation catalyst in the feed water will cause unexpected oxidation of the
    membrane. It is strongly recommended to remove these oxidizing agents contained in feed water
    before operating RO system.
    4. Permeate from the first hour of operation shall be discarded.
    5. The customer is fully responsible for the effects of chemicals that are incompatible with the elements.
    Their use will void the element Limited Warranty.

    Notice

    1. Toray accepts no responsibility for results obtained by the application of this information or the safety
    or suitability of Toray's products, either alone or in combination with other products. Users are
    advised to make their own tests to determine the safety and suitability of each product combination
    for their own purposes.
    2. All data may change without prior notice, due to technical modifications or production changes.

    Lenntech
    [email protected] Tel. +31-152-610-900
    www.lenntech.com Fax. +31-152-616-289
    Sep. 2012

    You might also like