Scribd Logo
Upload

Welcome to Scribd!

  • 68 views

    04 DA 004da1 PDF

    Uploaded by

    DarwinVillegas2790
    This document provides specifications for the C0-04DA-1 4-Channel Analog Current Output Module. It has 4 channels that can source currents between 4-20 mA, with 12-bit resolution. An external 24VDC power supply is required. Key specifications include the output range, resolution, load requirements, accuracy, isolation, protection and power needs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    04 DA 004da1 PDF

    Uploaded by

    DarwinVillegas2790
    68 views1 page
    This document provides specifications for the C0-04DA-1 4-Channel Analog Current Output Module. It has 4 channels that can source currents between 4-20 mA, with 12-bit resolution. An external 24VDC power supply is required. Key specifications include the output range, resolution, load requirements, accuracy, isolation, protection and power needs.

    Original Title

    04 DA 004da1.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for the C0-04DA-1 4-Channel Analog Current Output Module. It has 4 channels that can source currents between 4-20 mA, with 12-bit resolution. An external 24VDC power supply is required. Key specifications include the output range, resolution, load requirements, accuracy, isolation, protection and power needs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    68 views1 page

    04 DA 004da1 PDF

    Uploaded by

    DarwinVillegas2790
    This document provides specifications for the C0-04DA-1 4-Channel Analog Current Output Module. It has 4 channels that can source currents between 4-20 mA, with 12-bit resolution. An external 24VDC power supply is required. Key specifications include the output range, resolution, load requirements, accuracy, isolation, protection and power needs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    For the latest prices, please check AutomationDirect.com.

    CLICK I/O Module Specifications

    C0-04DA-1
    4-Channel Analog Current Output Module
    4-channel analog current sourcing output module, 12-bit resolution,
    range: 4-20 mA. External 24VDC power required, removable
    Output Specifications
    terminal block included (replacement AutomationDirect p/n C0-8TB).
    Outputs per Module 4
    Output Range 4-20 mA (source)
    Resolution 12-bit, 3.9 uA per count
    Wiring Diagram Current sourcing at 20mA max. (1 com-
    Output Type mon)

    C0-04DA-1
    Output Value in Fault Mode Less than 4mA
    4-20mA
    0-600 at 24VDC; minimum load: 0
    Load Impedance 32° to 131°F (0° to 55°C) ambient temp.

    Maximum Inductive Load 1 mH


    Allowed Load Type
    OUTPUT

    Grounded
    Maximum Inaccuracy ±1% of range
    Ch1 Max. Full Scale Calibration ±0.2% of range maximum
    Load Error (Including Offset)
    Max. Offset Calibration Error ±0.2% of range maximum
    Ch2
    ±75 PPM/°C maximum full scale calibra-
    Load Accuracy vs. Temperature tion change (±0.005% of range/°C)
    CH1
    Ch3 All ‘0V’ Max. Crosstalk at DC, 50/60Hz -72dB, 1 LSB
    CH2 terminals are
    Load
    CH3 connected
    Linearity Error (End to End) ±4 LSB max., (±0.1% of full scale)

    CH4 internally. Output Stability and ±2% LSB after 10 minute warmup period
    Repeatability typical
    Ch4 0V
    Load Output Ripple ±0.1% of full scale
    0V
    0.3 ms maximum, 5µs min. (full scale
    0V Output Settling Time range)
    0V All Channel Update Rate 10ms
    0V Max. Continuous Overload Outputs open circuit protected
    24VDC + 24V 1800 VAC applied for 1 second (100%
    Power –
    0V Field to Logic Side Isolation tested)
    Supply
    Type of Output Protection Electronically limited to 20mA or less

    Output Signal at Power Up and 4mA


    Power Down
    NOTE: When using this module you must also use CLICK External VDC Power Required 145mA
    programming software and PLC firmware version V1.40 or later. Base Power Required (24VDC) 20mA
    Terminal Block Replacement AutomationDirect p/n C0-8TB
    Weight 2.9 oz (82g)

    ZIPLink Pre-Wired PLC Connection


    Cables and Modules for CLICK PLC

    11-pin connector cable


    ZL-C0-CBL11 (0.5 m length)
    ZL-C0-CBL11-1 (1.0 m length)
    ZL-C0-CBL11-2 (2.0 m length)

    ZL-RTB20 20-pin feed-


    through connector module

    www.automationdirect.com/click-plc CLICK PLCs tCLP-119

    You might also like