Scribd Logo
Upload

Welcome to Scribd!

  • 680 views

    Continental Sid807evo Irom TC1797 Volvo

    Uploaded by

    Alpine Lee
    This document provides instructions for connecting a New Trasdata tool to communicate with an ECU and perform reading and writing operations. It describes two cases: 1) performing a normal bench connection with an external power supply, and 2) if that fails, connecting the New Trasdata tool to the vehicle's OBDII port using additional cables to perform an ObdData procedure before proceeding with the normal bench connection. Specific cables and connection procedures are outlined for communicating with the ECU using either a positioning frame adapter or direct wire connections.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Continental Sid807evo Irom TC1797 Volvo

    Uploaded by

    Alpine Lee
    680 views8 pages
    This document provides instructions for connecting a New Trasdata tool to communicate with an ECU and perform reading and writing operations. It describes two cases: 1) performing a normal bench connection with an external power supply, and 2) if that fails, connecting the New Trasdata tool to the vehicle's OBDII port using additional cables to perform an ObdData procedure before proceeding with the normal bench connection. Specific cables and connection procedures are outlined for communicating with the ECU using either a positioning frame adapter or direct wire connections.

    Original Title

    CONTINENTAL SID807EVO IROM TC1797 VOLVO

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for connecting a New Trasdata tool to communicate with an ECU and perform reading and writing operations. It describes two cases: 1) performing a normal bench connection with an external power supply, and 2) if that fails, connecting the New Trasdata tool to the vehicle's OBDII port using additional cables to perform an ObdData procedure before proceeding with the normal bench connection. Specific cables and connection procedures are outlined for communicating with the ECU using either a positioning frame adapter or direct wire connections.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    680 views8 pages

    Continental Sid807evo Irom TC1797 Volvo

    Uploaded by

    Alpine Lee
    This document provides instructions for connecting a New Trasdata tool to communicate with an ECU and perform reading and writing operations. It describes two cases: 1) performing a normal bench connection with an external power supply, and 2) if that fails, connecting the New Trasdata tool to the vehicle's OBDII port using additional cables to perform an ObdData procedure before proceeding with the normal bench connection. Specific cables and connection procedures are outlined for communicating with the ECU using either a positioning frame adapter or direct wire connections.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 8

    NT_CONTINENTAL_SID807EVO_IROM_TC1797_VOLVO VER 02.

    02

    PLUGIN 999 :NEW TRASDATA

    WARNING: for this ECU it may be necessary to recover the password by connecting the New
    Trasdata to the OBDII socket of the vehicle.
    If following the instructions of CASE 1 the communication with the control unit is not established,
    it is necessary to follow the instructions of CASE 2.

    CASE 1: proceed with the normal bench connection, taking care to power the New Trasdata unit
    using a stabilized external booster / power supply or an external battery.
    Click on ID and follow the procedures to communicate with the ECU.
    If the connection is good and you can manage the reading operations you can proceed without
    problems.
    If you cannot communicate correctly with the control unit, follow the instructions of CASE 2.

    CASE 2: if the bench connection and reading fails it is necessary to proceed with the following
    procedures:

    1. connect New Trasdata tool to the pc via USB


    2. connect F34NTA14 cable to the New Trasdata DB25 port
    3. connect the F34NTA14 cable to the vehicle OBDII port
    4. run the sw to manage the New Trasdata tool
    5. select the correct connection mode for the vehicle
    6. click on ObdData button
    7. wait until the end of the ObdData procedure

    IF the procedure accomplish properly it is now possible to proceed with the normal bench
    connection and perform the standard reading/writing operations.

    Required cable for ObdData operation: F34NTA14

    Dimsport srl – 15020 Serralunga di Crea (AL) - Italy- Tel. +39 0142 9552 – WEB : www.dimsport.com -1-
    NT_CONTINENTAL_SID807EVO_IROM_TC1797_VOLVO VER 02.02

    Dimsport srl – 15020 Serralunga di Crea (AL) - Italy- Tel. +39 0142 9552 – WEB : www.dimsport.com -2-
    NT_CONTINENTAL_SID807EVO_IROM_TC1797_VOLVO VER 02.02

    Dimsport srl – 15020 Serralunga di Crea (AL) - Italy- Tel. +39 0142 9552 – WEB : www.dimsport.com -3-
    NT_CONTINENTAL_SID807EVO_IROM_TC1797_VOLVO VER 02.02

    ECU CONNECTOR
    In order to connect to the ECU use the cable F32GN037C.
    Make sure that the POWER led (red) on NEW TRASDATA is ON. These connections are required for
    all the connection approaches: loose wires and metal positioning frame adapter.

    WARNING:
    Due to the relevant power absorbed by the ECU
    at the beginning of the communication it is
    necessary to feed the ECU with an external power
    supply or a car battery. Connect the power cable
    F32GN003 to the New Trasdata and then to the
    power source.
    The ECU must be powered through the
    New Trasdata using the F32GN0037C cable.

    Dimsport srl – 15020 Serralunga di Crea (AL) - Italy- Tel. +39 0142 9552 – WEB : www.dimsport.com -4-
    NT_CONTINENTAL_SID807EVO_IROM_TC1797_VOLVO VER 02.02

    1. METAL POSITIONING FRAME CONNECTION with F34DM033 adapter

    In the following picture the F34DM033 adapter positioning pads are displayed.

    Dimsport srl – 15020 Serralunga di Crea (AL) - Italy- Tel. +39 0142 9552 – WEB : www.dimsport.com -5-
    NT_CONTINENTAL_SID807EVO_IROM_TC1797_VOLVO VER 02.02

    1.

    Dimsport srl – 15020 Serralunga di Crea (AL) - Italy- Tel. +39 0142 9552 – WEB : www.dimsport.com -6-
    NT_CONTINENTAL_SID807EVO_IROM_TC1797_VOLVO VER 02.02

    Dimsport srl – 15020 Serralunga di Crea (AL) - Italy- Tel. +39 0142 9552 – WEB : www.dimsport.com -7-
    NT_CONTINENTAL_SID807EVO_IROM_TC1797_VOLVO VER 02.02

    2. BOOT & CNF1 DIRECT CONNECTION

    Connect the GREY&BLUE wires of the cable F32GN037C as described here below:

    Dimsport srl – 15020 Serralunga di Crea (AL) - Italy- Tel. +39 0142 9552 – WEB : www.dimsport.com -8-

    You might also like