Analysis of Variance

Analysis of Variance
(Material & Labour)

Pankaj Grover
Assistant Professor (ABST)
Dr. B. R. Ambedkar, Govt. College, Sriganganagar
Variance analysis can be defined as the process of computing the amount

of, and isolating the cause of variances between actual costs and standard costs.
Variance analysis involves two phases:
(1) Computation of individual variances, and

(2) Determination of Cause (s) of each variance.
Various types of Variances are:-

1. Cost Variances
2. Material Variances
3. Labour Variances
4. Overhead Variance
5. Fixed Overhead Variance
6. Sales Variance
7. Profit Variance
I. Material Variance: The following variances constitute materials

variances:
Material Cost Variance:
Material cost variance is the difference between the actual cost of direct
material used and standard cost of direct materials specified for the output
achieved. This variance results from differences between quantities consumed
and quantities of materials allowed for production and from differences between
prices paid and prices predetermined.
This can be computed by using the following formula:
Material cost variance = (AQ X AP) – (SQ X SP)
Where
AQ = Actual quantity
AP = Actual price
SQ = Standard quantity for the actual output
SP = Standard price
A. Material Usage Variance:

The material quantity or usage variance results when actual quantities of
raw materials used in production differ from standard quantities that should
have been used to produce the output achieved. It is that portion of the direct
materials cost variance which is due to the difference between the actual
quantity used and standard quantity specified.
As a formula, this variance is shown as:

Materials quantity variance = (AQ – SQ) x SP
Where
AQ = Actual quantity
SP = Standard price
A material usage variance is favourable when the total actual
quantity of direct materials used is less than the total standard quantity
allowed for the actual output.
B. Materials Price Variance:
A materials price variance occurs when raw materials are purchased at a
price different from standard price. It is that portion of the direct materials
which is due to the difference between actual price paid and standard price
specified and cost variance multiplied by the actual quantity. Expressed as a
formula,
Materials price variance = (AP – SP) x AQ
Where
AP = Actual price
SP = Standard price
Materials price variance is un-favourable when the actual price paid
exceeds the predetermined standard price. It is advisable that materials price
variance should be calculated for materials purchased rather than materials
used. Purchase of materials is an earlier event than the use of materials.
II. Labour Variances:

Direct labour variances arise when actual labour costs are different from
standard labour costs. In analysis of labour costs, the emphasis is on labour rates
and labour hours.
Labour variances constitute the following:
Labour cost variance denotes the difference between the actual direct
wages paid and the standard direct wages specified for the output achieved.
This variance is calculated by using the following formula:
Labour cost variance = (AH x AR) – (SH x SR)
Where:
AH = Actual hours
AR = Actual rate
SH = Standard hours
SR = Standard rate
A. Labour Efficiency Variance:

The calculation of labour efficiency or usage variance follows the same
pattern as the computation of materials usage variance. Labour efficiency
variance occurs when labour operations are more efficient or less efficient than
standard performance. If actual direct labour hours required to complete a job
differ from the number of standard hours specified, a labour efficiency variance
results; it is the difference between actual hours expended and standard labour
hours specified multiplied by the standard labour rate per hour.
Labour efficiency variance is computed by applying the following formula:

Labour efficiency variance = (Actual hours – Standard hours for the actual
output) x Std. rate per hour.
It may be noted that the standard labour hour rate and not the actual rate
is used in computing labour efficiency variance. If quantity variances are
calculated, changes in prices/rates are excluded, and when price variances are
calculated, standard quantities are ignored.
i. Labour Mix Variance:

Labour mix variance is computed in the same manner as materials mix
variance. Manufacturing or completing a job requires different types or grades
of workers and production will be complete if labour is mixed according to
standard proportion. Standard labour mix may not be adhered to under some
circumstances and substitution will have to be made. There may be changes in
the wage rates of some workers; there may be a need to use more skilled or
expensive types of labour, e.g., employment of men instead of women;
sometimes workers and operators may be absent.
These lead to the emergence of a labour mix variance which is calculated
by using the following formula:
Labour mix variance = (Actual labour mix – Revised standard labour mix in
terms of actual total hours) x Standard rate per hour
(ii) Labour Yield Variance:

The final product cost contains not only material cost but also labour cost.
Therefore, gain or loss (higher or lower output than the standard output) should
take into account labour yield variance also. A lower output simply means that
final output does not correspond with the production units that should have been
produced from the hours expended on the inputs.
It can be computed by applying the following formula:

Labour yield variance = (Actual output – Standard output based on actual hours)
x Av. Std. Labour Rate per unit of output.
Or
Labour yield variance = (Actual loss – Standard loss on actual hours) x Average
standard labour rate per unit of output
Labour yield variance is also known as labour efficiency sub-variance which is

computed in terms of inputs, i.e., standard labour hours and revised labour hours
mix (in terms of actual hours).
Labour efficiency sub-variance is computed by using the following

formula:
Labour efficiency sub-variance = (Revised standard mix – standard mix) x
Standard rate
B. Labour Rate Variance:

Labour rate variance is computed in the same manner as materials price
variance. When actual direct labour hour rates differ from standard rates, the
result is a labour rate variance. It is that portion of the direct wages variance
which is due to the difference between actual rate paid and standard rate of pay
specified.
The formula for its calculation is:

Labour rate variance = (Actual rate – Standard rate) x Actual hours
The number of actual hours worked is used in place of the number of the
standard hours specified because the objective is to know the cost difference
due to change in labour hour rates, and not hours worked. Favourable rate
variances arise whenever actual rates are less than standard rates; unfavourable
variances occur when actual rates exceed standard rates.
C. Idle Time Variance:

Idle time variance occurs when workers are not able to do the work due to
some reason during the hours for which they are paid. Idle time can be divided
according to causes responsible for creating idle time, e.g., idle time due to
breakdown, lack of materials or power failures. Idle time variance will be
equivalent to the standard labour cost of the hours during which no work has
been done but for which workers have been paid for unproductive time.

Analysis of Variance

Uploaded by

Copyright:

Available Formats

Analysis of Variance

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Analysis of Variance

Uploaded by

Copyright:

Available Formats

Analysis of Variance

(Material & Labour)

Variance analysis can be defined as the process of computing the amount

(1) Computation of individual variances, and

Various types of Variances are:-

I. Material Variance: The following variances constitute materials

This can be computed by using the following formula:

Material cost variance = (AQ X AP) – (SQ X SP)

A. Material Usage Variance:

As a formula, this variance is shown as:

Materials price variance = (AP – SP) x AQ

II. Labour Variances:

Labour variances constitute the following:

A. Labour Efficiency Variance:

Labour efficiency variance is computed by applying the following formula:

i. Labour Mix Variance:

(ii) Labour Yield Variance:

It can be computed by applying the following formula:

Labour yield variance is also known as labour efficiency sub-variance which is

Labour efficiency sub-variance is computed by using the following

B. Labour Rate Variance:

The formula for its calculation is:

C. Idle Time Variance:

You might also like