MUNICIPAL CORPORATION OF GREATER MUMBAI

ROAD DEPARTMENT

VOLUME-I

UNIFIED SCHEDULE OF RATES FOR

ROAD WORKS 2018

effective from 20.06.2018

 A. LIST OF UNITS USED

Sr. No. Units Abbreviation Remark

symbol

1 1 Length (Running Meter) Rmt

2 Weight (Metric Tonne) MT

3 Weight Kilogram Kg

4 Time Shift Shift Refers to a time

duration of 8 Hrs

5 Time (Hour) Hr

6 Quantity (Numbers) Each/No. Each refers to a single

quantity per

entity

7 Quantity (Lump sum) LS

8 Volume Cum

9 Area (Square Meter) Sqm

10 Litre Ltr

11 Cubic Centimeter Cucm

 B. LIST OF ABBREVIATIONS

AASHTO American Association of State Highway and Transportation Officials

ASTM American Society for Testing and Materials

BS British Standard published by the British Standards Institution

BOQ Bill of Quantities forming part of the contract

CBR California Bearing Ratio

IRC Indian Road Congress

IS Indian Standard published by the Bureau of Indian Standards

WC Water Cement Ratio

CRRI Central Road Research Institute

UCS Unconfined Compressive Strength

WBM Water Bound Macadam

SAM Stress Absorbing Membrane

SAMI Stress Absorbing Membrane Interlayer

MoRTH Ministry of Road Transport and Highways

PCC Plain cement concrete

RCC Reinforced cement concrete

PSC Prestressed concrete

HYSD High Yield Strength Deformed Bars

EJ Expansion joints

FBEC Fusion Bonded Epoxy Coating

RE Reinforced Earth

ESU Elastomeric slab unit

 Schedule for Road Works

2018

INDEX

Chapter. Chapter Contents Item Range Page

No. Code No.
1 RW-1 Earth Work Items RW-1-01 to RW-1-19 1- 3
2 RW-2 Subbase and Base Items RW-2-01 to RW-2-24 3-6
3 RW-3 Paver Items RW-3-01 to RW-3-45 6 - 15

4 RW-4 Kerb Stone RW 4.01 to RW 4.15 15 - 16

5 RW-5 Bituminous Items RW-5-01 to RW-5-78 16 - 25

6 RW-6 Mason RW-6-01 to RW-6-06 25

7 RW-7 Miscellaneous Items RW-7-01 to RW-7-54 25 - 32

8 RW-8 Ducts and Pipes RW-8-01 to RW-8-04 32

10 RW-10 Cement Concrete Road RW-10-01 to RW-10-62 32 - 42

Items
11 RW-11 Geosynthetics And Reinforced RW-11-01 to RW-11-05 42 - 43
Earth
12 RW-12 Maintenance Of Roads RW-12-01 to RW-12-16 43 -45
 USoR 2018 Roads Department
Schedule for Roadworks 2018

ITEM CODE ITEM DESCRIPTION UNIT RATE

I EARTH WORK ITEMS
Scarifying the existing bituminous road surface to a depth of 150 mm
removing, including transportaion any where & bringing the existing
road to proper grade, level & camber &/ as per super elevation, rolling
R2-RW-1-01 with 10/12 Tonnes power roller & binding the scarified layer with stone Sqm 180
dust/grit/ sand,watering,brushing, rolling,etc. complete as specified as
directed by the Engineer.
Removing the humps (including wavy portion of the bituminous
surface)by chiselling,picking, or by any means, &transporting
R2-RW-1-02 excavated material anywhere & dressing the same to proper Sqm 106
level,grade & camber &/ super elevation complete as specified as
directed by the Engineer.
Bringing back the materials excavated from the work site of any kind of
any size by any means & when directed upto a distance of 3Km., for
filling / refilling in layers not exceeding 30 cm loose thicknessas
R2-RW-1-03 directed & specified (30%will be deducted for voids in earth & 40% for Cum 503
voids in boulders from lorry measurement) as specified as directed by
the Engineer.
Levelling, watering & rolling with power roller weighing not less than 3
R2-RW-1-04 tonnes & preparing the ground to the required level,grade & camber as Sqm 5
specified as directed by the Engineer.
Levelling, watering and rolling to 95% Standard Proctor Density with a
power roller weighing not less than 10 tonnes and preparing the
R2-RW-1-05 ground to the required grade and camber as specified as directed by Sqm 9.27
the Engineer.
Levelling, watering and rolling to 95% Standard Proctor Density with a
power roller weighing not less than 10 tonnes and preparing the
R2-RW-1-06 ground to the required grade and camber for rolling in trenches as Sqm 18
specified as directed by the Engineer .
P/L earth work in embankments & /or filling low-lying ground in layers
not exceeding 25cm. in loose thickness & compacting each layer with
a 10/12 tonnes power roller including levelling watering, etc. complete
R2-RW-1-07 in conformity with the required lines,grades & cross sections & also Cum 1422
cleaning & grubbing the ground etc. complete as per prevailing MCGM
specification for Roadworks clause no. 151.0

Page 1
 USoR 2018 Roads Department
P/L earth work in embankments & /or filling low-lying grounds in layers
not exceeding 25cm. in loose thickness & compacting each layer with
a 10/12 tonnes power roller including levelling watering, etc. complete
in conformity with the required lines,grades & cross sections (Lab
C.B.R. in soaked conditions shall not be less than 4) etc. including
cleaning & grubbing the ground (The contractor should take note of the
site conditions pertaining to creek lands under reference & should note
that nothing extra whatsoever will be paid like diversion of water, the
R2-RW-1-08 protective measures that may be necessary to be carried out to protect Cum 1511
the embankment from water & settlement of earth. Settlements will not
be paid for the earth work and must be retained for consolidations for
one season & settlement if any will be ascertained & made up free of
cost. The rate includes efforts for diversion of water, protection of
embankments & also settlement of earth.etc. complete as per
prevailing MCGM specification for Roadworks clause no. 151.0.

P/L a top layerof 15cm. compacted thickness of earth , rolling with

10/12 tonne power roller, watering etc. complete in conformity with the
lines, grades & cross sections & camber super elevation (Lab C.B.R. in
R2-RW-1-09 soaked condition shall not be less than 10) including clearing & Cum 1535
grubbing the ground etc. complete (including stabilisation if necessary.)
as per per prevailing MCGM specification for Roadworks clause no.
151.0
To carry out earth work in embankment or filling in low lying ground
with Municipal earth,debris in layers not exceeding 25cm. in loose
thickness & compacting each layer with 10/12 tonnes power roller,
watering etc. in conformity with the lines, grades & cross sections
R2-RW-1-10 including clearing & grubbing the ground etc. completes specified as Cum 184
directed by the Engineer. (Transport of Municipal earth will be paid
separately) as per road specifications and as per prevailing MCGM
specification for Roadworks clause no. 151.0

Filling in trenches with Municipal earth materials etc. in layers not

exceeding25cm. in loose thickness , watering etc. compacting by
R2-RW-1-11 means of plate vibrator or a power roller to a depth not exceeding 2m. Cum 141
etc. complete as per prevailing MCGM specification for Roadworks
clause no. 151.0.
Preparing stabilised soilbase 15cm. compacted thickness including
excavation, adding the required sand, lime or other suitable material
mixed & laid complete in regular lines to conform with the
requiredgrade,camber & cross section, rolling etc. complete as
R2-RW-1-12 specified & as directed. (C.B.R. under soaked condition shall not be Sqm 207
less than 10) with soil available on site as per road specifications and
as per prevailing MCGM specification for Roadworks clause no. 151.0

Levelling, watering & rolling by vibratory roller weighing not less than 10
tonnes & preparing the ground to the required grade & camber etc.
R2-RW-1-13 Sqm 9.82514
complete as specified as directed by the Engineer as per prevailing
MCGM specification for Roadworks.
Use of sensor paver for laying as per prevailing MCGM specification for
R2-RW-1-14 Sqm 15
Roadworks
Use of ordinary paver for laying as per prevailing MCGM specification
R2-RW-1-15 Sqm 9
for Roadworks
Extra for using sensor paver instead of ordinary paver as per prevailing
R2-RW-1-16 Sqm 6
MCGM specification for Roadworks

Page 2
 USoR 2018 Roads Department
Extra for using vibratory Roller instead of power roller for compaction
R2-RW-1-17 as per prevailing MCGM specification for Roadworks Sqm 1

Levelling, watering & rolling by vibratory rollerIDD-22 weighing not less

than 10 tonnes & preparing the ground to the required grade & camber
R2-RW-1-18 (only to be used for reinstatement of trench in road works) as per Sqm 19
prevailing MCGM specification for Roadworks.
Extra over for using vibratory roller IDD-22 at time of reinstatement of
R2-RW-1-19 trench in road work as per prevailing MCGM specification for Sqm 1
Roadworks.
II SUB BASE AND BASE ITEMS
Supplying blue trap stones of approved quality & providing the same in
rubble packing 25cm thick to the required level & camber,filling in voids
with chips & 60mm metal etc. including spreading over the rubble
R2-RW-2-01 60mm metal 75mm thick, compacting to the satisfaction of the Sqm 499
Engineer by a roller weighing not less than 10 tonnes etc. complete as
specified & as directed by the Engineer .

Supplying blue trap stones of approved quality & providing the same in
rubble packing 25cm thick to the required grade,level & camber,filling
R2-RW-2-02 in voids with chips & 60mm metal etc.compacting using mechanical Sqm 352
vibrating compactor / 8-10 MT Roller etc.complete as specified & as
directed by the Engineer .
Laying hand set rubble packing (using municipal rubble) for 25cm thick
to the required grade, level & camber, filling in the voids with chips & 60
mm Municipal metal including spreading over the rubble layer 50mm to
R2-RW-2-03 60mm size municipal metal for 75mm thick compacted to the Sqm 114
satisfaction of the Engineer by a roller weighing not less than 10 tonnes
etc. as specified & as directed by the Engineer .

Laying hand set rubble packing (using municipal rubble) for 25cm thick
to the required level & camber, filling in the voids with newchips & 60
mm metal etc. including spreading over the rubble layer 60mm.
R2-RW-2-04 Size,new metal 75mm thick compacting to the satisfaction of the Sqm 232
Engineer by a roller weighing not less than 10 tonnes as specified & as
directed by the Engineer .
Providingdry rubble packing behind the abutment retaining & wing wall
R2-RW-2-05 in horizontal layers etc. complete as specified & as directed by the Cum 881
Engineer .
Breaking concrete pieces availableon site into 75 mm pieces,spreading
the same to a thickness of 15 cm.and compacting to the satisfaction of
the Engineer, by a static roller weighing not less than 10 tonnes
R2-RW-2-06 including watering, binding with stone dust, etc. complete and making Sqm 104
the layer water bound as per prevailing MCGM specification for
Roadworks clause no.235
Breaking asphalt cakesavailable on site into 90 mm pieces and
spreading the same to a thickness of 15 cm. and compacting to the
R2-RW-2-07 satisfaction of the Engineer, by a static roller weighing not less than 10 Sqm 94
tonnes.Including binding withstone powder complete as directed.

Page 3
 USoR 2018 Roads Department
Providing & layingsub base 20 cm compacted(K.T.R.)thick made of
metal obtained from rock having AIV of not more than 40% (metal
varying in size from 90 mm to 45mm) and compacting the same to the
satisfaction of the Engineer laid complete in to two layers the required
R2-RW-2-08 level and camber, rolling with 10/12 tonnes roller interstices being filled Sqm 362
with stone dust, watering, rolling and making each layer waterbound.
as per prevailing MCGM specification for Roadworks Clause no.220.

Providing and laying sub-base 10 cm.compacted thickness made up of

metal obtained from rock having AIV of not more than 40% (metal
varying in size from 90 mm to 45mm) and compacting the same
tosatisfaction of the engineer laid complete in one layer to the required
R2-RW-2-09 level and camber, rolling with 10/12 tonnes roller interstices being filled Sqm 182
in withstone dust, watering, rolling/and making the layer water bound
.as per prevailing MCGM specification for Roadworks Clause no.220.

Spreading Municipal material such as broken concrete,asphalt pieces

90mm to45 mm metal in a layer of 10 cm. Compacted thickness and
compactingwith 10/12 tonnes power roller to the satisfaction of the
R2-RW-2-10 Engineer, binding with stone dust, watering,rolling and making the layer Sqm 95
waterbound as per prevailing MCGM specification for Roadworks
Clause no.220.
Breaking Municipal rubble stone available on site to 90mm to 45mm
metal & laying the same in a sub-base 10cm. thickcompacting& to the
satisfaction of the Engineer, by a 10/12 tonnes power
R2-RW-2-11 roller,laidcomplete in ONE layer to the required level & camber, binding Sqm 95
with stone dust,watering,rolling & makinglayer waterbound etc.
complete as per prevailing MCGM specification for Roadworks Clause
no.220.
Breaking Municipal rubble stone available on site to 90mm to 45mm
metal & laying the same in a sub-basecompacting to 20cm.in two
layers (each 100mm thick) & to the satisfaction of the Engineer, by a
R2-RW-2-12 10/12 tonnes power roller,laidcomplete in one layers to the required Sqm 189
level & camber, binding with stone dust,watering,rolling & making the
layer waterbound. As per prevailing MCGM specification for
RoadworksClause no.220.
Supplying & spreading 60mm metalcompacting the same to 10cm. To
the satisfaction of the Engineer by a roller weighing not less than 10
tonnes to the required grade,level & camber including binding with
R2-RW-2-13 grit,sand, stone dust, watering, rolling etc. complete & making the layer Sqm 171
waterbound as per prevailing MCGM specification for Roadworks
Clause no.235.2.5.
Supplying & spreading 60 mm metalcompacting the same to 7.5 cm. to
the satisfaction of the Engineer by a roller weighing not less than 10
tonnes to the required grade, level and camber including binding with
R2-RW-2-14 grit, sand, stone dust, watering, rolling etc. complete and making the Sqm 135
layer water bound as per prevailing MCGM specification for Roadworks
Clause no.220.
Spreading Municipal 60mm size metal available on sitecompacting to
7.5cm. The same to the satisfaction of the Engineer by roller weighing
not less than 10 tonnes to the required grade/ level & camber including
R2-RW-2-15 binding with sand/stone dust & grit & watering,levelling, rolling etc. & Sqm 59
making the layer waterbound as per prevailing MCGM specification for
Roadworks Clause no.220.

Page 4
 USoR 2018 Roads Department
Breaking municipal rubble available on site to form 60mm size metal &
depositing the same in neat stacks as directed (depot or lorry
R2-RW-2-16 measurement will be consider without deduction for voids).as per Cum 335
prevailing MCGM specification for Roadworks Clause no.220.

Breaking municipal rubble available on site into 60mm size metal

spreading the same to the thickness compacting to 10cm. & to the
satisfaction of the Engineer by a roller weighing not less than 10 tonnes
R2-RW-2-17 to a proper grade,level & camber including binding with sand/stone Sqm 71
dust or grit & watering, rolling etc. complete & making the layer
waterbound as per prevailing MCGM specification for Roadworks
Clause no.220.
Breaking municipal rubble available on site into 60mm size metal
spreading the same to the thickness compacting to 7.5cm. & to the
satisfaction of the Engineer by a roller weighing not less than 10 tonnes
R2-RW-2-18 to a proper grade,level & camber including binding with sand/stone Sqm 60
dust or grit & watering, rolling etc. complete & making the layer
waterbound as per prevailing MCGM specification for Roadworks
Clause no.220.
Ramming & compacting the metal, concrete pieces, asphalt cakes with
R2-RW-2-19 a heavy rammer weighing not less than 15kg. Or a frog rammer Sqm 13
including watering, levelling etc. complete.
Providing & laying, spreading & compacting gradedcrushed stone
aggregate to wet mix macadam satisfaction including premixing the
material with water to OMC in mechanical mix (pug mill) carriage of mix
material by tipper to site laying in uniform layer of 75mm
to100mm(compacted thickness each)with sensor paver finisher on
R2-RW-2-20 preparedsubbase & compacting with vibratory roller (10 tonne) to Cum 2937
achieve desired density including lighting, guarding barricading &
maintenance of diversion etc. as directed by the Engineer, ( Rebate for
not using sensor paver should be taken,(metal gradation from 53mm
to 75mm micron as per prevailing MCGM specification for Roadworks
clause no.240).
Providing & laying, spreading & compacting specified crushed stone in
granular subbase course including premixing the material in
mechanical mixer (pug mill or approved type), spreadingof mixed
materialin uniform layer of 100mm to 75mm (compacted thickness
each) with motor grader or paver on prepared murum surface &
R2-RW-2-21 compacting with 10 tonne vibratory roller to achieve desired density Cum 2547
including all material, labour, machinery, lighting barricading to all lifts &
lead maintenance of diversion etc. complete (metal gradation from
75mm to 75 micron as per prevailing MCGM specification for
Roadworks clause no.210).

Rebate for not using motor grader / paverfor laying of Granular Sub
R2-RW-2-22 Cum -93
base in R2-RW 2.21
Providing and laying sub-basemade up of metal obtained from rock
having AIV of not more than 40% (metal varying in size from 90 mm to
45mm) and compacting the same to 7.5 to10 cm thick & to the
satisfaction of the engineer laid complete in one layer to the required
level and camber, rolling with 10/12 tonnes roller interstices being filled
R2-RW-2-23 Cum 2110
in withstone dust, watering, rolling/and making the layer water bound
as per prevailing MCGM specification for RoadworksClause no.220.
(VOLUMETRIC MEASUREMENTS TO BE RECORED BY LEVELS
ONLY)

Page 5
 USoR 2018 Roads Department
Supplying & spreading 60mm metalcompacting the same to 7.5 to
10cm to the satisfaction of the Engineer by a roller weighing not less
than 10 tonnes to the required grade,level & camber including binding
with grit, sand stone dust, watering rolling etc. complete & making the
R2-RW-2-24 Cum 2169
layer waterbound as per prevailing MCGM specification for Roadworks
Clause no.220. (VOLUMETRIC MEASUREMENTS TO BE RECORED
BY LEVELS ONLY)

III PAVER ITEMS

P/F shahabad stone pavment 38mm. to 60 mm. thick of approved
quality in traffic islands or wherever directed in City/Subs. Including
necessary base of cement concrete M-10 (1:3:6) upto any required
R2-RW-3-01 depth but not less than 100mm thick, sand cushioning 25 mm below Sqm 1249
tiles & finishing joints of the shahabad stone tiles with C.M. 1:2
andincluding pointing, curing etc. complete as specified & as directed.

Removing, cleaning off old mortor & Carting away shahabad stone
R2-RW-3-02 pavement upto a distance of 3Km. & stacking the same neatly as Sqm 41
directed.
Extra over above for an additional distance of every 1Km. Or part
R2-RW-3-03 Sqm 1.6
thereof.
Removing & resetting blue stone pavement in 1:6 C.M. on a 10cm.
R2-RW-3-04 Thick M-10 C.C. bedding including filling in joints with 1:2 C.M. & Sqm 843
cement pointing curing etc.
Removing & resetting blue stone pavement in 1:6 C.M. on a cushion of
sand 20 mm to 25 mmthick on 10 cm thick M-10 C.C. bedding
R2-RW-3-05 Sqm 836
including filling in joints with 1:2 C.M. & cement pointing curing etc.
complete
Removing, cleaning off old mortor & carting away blue stone pavement
R2-RW-3-06 upto a distance of 3Km. & stacking the same neatly as directed. Sqm 41

Extra over above for an additional distance of every 1 Km or part

R2-RW-3-07 Sqm 1.55
thereof.
P/L Precast M-20 plain C.C. slabs,10 cm thick in pavement over 10 cm
R2-RW-3-08 thick M-10C.C. bed including filling in the joints with 1:2 C.M. & Sqm 1531
pointing, curing etc. complete.
P/L Precast M-20 reinforced C.C. slabs,10 cm thick over M-10C.C.
R2-RW-3-09 bedding 10 cm thick, including filling in the joints with 1:2 C.M. & Sqm 1900
pointing, curing etc. complete.
P/L thick Precast M-20 plain C.C. slabs 5 cm thick, in pavement on M-
R2-RW-3-10 10C.C. bedding 10 cm thick including filling in the joints with 1:2 C.M. & Sqm 1117
pointing, curing etc. complete.
Providing & fixing 80 mm thick interlocking unishape concrete pavers (
monolithic- single layer precast concrete blocks) in grey cement in the
carriageway havingaverage crushing strength of not less than
50N/mm2 as per technical specification and IS Code 15658:2006,
R2-RW-3-11 placed on average compacted thickness of 25 mm, well graded sand Sqm 871
cushioning uniformly compacted with proper capacity mechanical
compactor with the proper level, grade and camber etc. complete as
specified and as directed by the Engineer.

Page 6
 USoR 2018 Roads Department
Providing & fixing 60 mm thick interlocking unishape concrete pavers (
monolithic- single layer precast concrete blocks) in grey cement having
average crushing strength of not less than 40 N/mm² as per technical
specification and IS Code 15658:2006, placed on average compacted
R2-RW-3-12 thickness 25 mm, well graded sand cushioning uniformly compacted Sqm 772
with proper capacity mechanical compactor with required level, grade
and camber etc. complete as specified and as directed by the
Engineer.
Removing& refixing interlockingconcrete pavers of 80 mm thick, of any
size, shape and colour considering 10% breakage area of paver block
while removing the same from position and replacing the same by new
paver blocks having average crushingstrength not less than 50
N/mm²as per technical specification and IS Code 15658:2006, placed
R2-RW-3-13 on average compacted thickness 25 mm well graded sand cushioning Sqm 225
uniformly compacted with proper capacity mechanical compactor with
required level, grade and camber etc. complete as specified and as
directed by the Engineer.

Removing& refixing interlocking concrete pavers of 60 mm thick, of any

size, shape and colour considering 10% breakage area of paver block
while removing same from position and replacing the same by new
paver blockshaving average crushingstrength of not less than 40
N/mm² as per technical specifications and IS Code 15658:2006,
R2-RW-3-14 Sqm 215
placed on average compacted thickness 25 mm well graded sand
cushioning uniformly compacted with proper capacity mechanical
compactor with required level, grade and camber etc. complete as
specified and as directed by the Engineer.

Providing & Fixing 80 mm thick unishape grey cement concrete

interlocking pavers in the carriageway (monolithic-single layer precast
concrete blocks) in Red (Terra Cotta), Black, Brownor any colour
withpigment @ 3% by weight of cement having average crushing
strength of not less than 50 N/mm2 as per technical specifications and
R2-RW-3-15 Sqm 927
IS Code 15658:2006, placed on average compacted thickness 25 mm
well graded sand cushioning uniformly compacted with proper capacity
mechanical compactor with required level, grade and camber etc.
complete as specified and as directed by the Engineer.

Providing & Fixing 60 mm thick unishape grey cement concrete

interlocking pavers in the footpath with pigment @ 3% by weight of
cement(monolithic-single layer precast concrete blocks manufactured
in grey cement only) in Red ( Terra Cotta), Black, Brownor any colour
having average crushing strength not less than 40 N/mm² as per
R2-RW-3-16 technical specifications and IS Code 15658:2006, placed on average Sqm 901
compacted thickness 25 mm well graded sand cushioning uniformly
compacted with proper capacity mechanical compactor with required
level, grade and camber etc. complete as specified and as directed by
the Engineer.

Page 7
 USoR 2018 Roads Department
Providing & fixing in the footpath, 60 mm thick Lacquer coated
(Reflective) interlocking grey cement concrete pavers in Red ( Terra
Cotta), Black, Brown, lemon yellow or any colour with vermeticular or
any antiskid texture on top surface of approved pattern/ shape and
colour having average crushing strength not less than 40 N/mm²
manufactured in double layer precast concrete blocks as per technical
specifications and IS CODE 15658:2006. The top layer of paver block
should be 12 to 15 mm thick and consist cubical shape stone
aggregate 8 mm size sieve 100% passing and retain on 4.75 mm size
R2-RW-3-17 sieve , silica sand andwith pure iron oxide ultra voilete stabilized Sqm 858
pigment @ 5% by weight of cement and should be coated with lacquer
having hard, high abrasive resistance and water repellent.The bottom
layer should be 45 to 48 mm thick having 12 mm size sieve 100%
passing aggregate as per technical specification,placed on average
compacted thickness 25 mm well graded sand cushioning uniformly
compacted with proper capacity mechanical compactor with required
level, grade and camber etc. complete as specified and as directed by
the Engineer.

Providing & fixing in the carriageway 80 mm thickgrey cement concrete

Lacquer coated (Reflective) interlocking pavers in Red ( Terra Cotta),
Lemon Yellow, Bright Yellow or any colour with vermeticular or any
antiskid texture on top surface of approved pattern/ shape and colour
having average crushing strength not less than 50N/mm²
manufactured in doublelayer precast concrete blocks as per technical
specifications and IS CODE 15658:2006. The top layer of paver block
should be 12 to 15 mm thick and consist cubical shapestone
aggregate 8 mm sieve 100% passing and retained on 4.75 mm size
R2-RW-3-18 sieve , silica sand and with pure iron oxide ultra voilete stabilized Sqm 1042
pigment @ 5% by weight of white cement and should be coated with
lacquer having hard, high abrasive resistance and water repellent.The
bottom layer should be 65 to 68 mm thick having 12 mm sieve 100%
passing aggregate as per technical specification, placed on average
compacted thickness 25 mm well graded sand cushioning uniformly
compacted with proper capacity mechanical compactor with required
level, grade and camber etc. complete as specified and as directed by
the Engineer.

Providing & fixing in the carriageway 100 mm thick interlocking

concrete unishape pavers( monolithic- single layer precast concrete
blocks) of grey cement colouredhaving average crushing strength not
less than 50N/mm² as per technical specificationand IS CODE
R2-RW-3-19 15658:2006, placed on average compacted thickness 25 mm well Sqm 1054
graded sand cushioning uniformly compacted with proper capacity
mechanical compactor with required level, grade and camber etc.
complete as specified and as directed by the Engineer.

Providing & Fixing in the carriageway interlocking 100 mm thick grey

cement concrete unishape pavers in Red ( Terra Cotta), Black,
Brownor any colourunishape (monolithic-single layer precast concrete
blocks) withpigment @ 3% by weight of cement having average
crushing strength of not less than 50N/mm² as per technical
R2-RW-3-20 Sqm 1213
specificationand IS CODE 15658:2006,placed on average compacted
thickness 25 mm well graded sand cushioning uniformly compacted
with proper capacity mechanical compactor with required level, grade
and camber etc. complete as specified and as directed by the
Engineer.

Page 8
 USoR 2018 Roads Department
Removing& refixing interlocking concrete pavers of 100 mm thick, of
any size, shape and colour considering 10% breakage area of paver
block while removing same from position and replacing the same by
new paver blocks having average crushingstrength not less than 50
N/mm² as per technical specification and IS CODE 15658:2006,placed
R2-RW-3-21 on average compacted thickness 25 mm well graded sand cushioning Sqm 251
uniformly compacted with proper capacity mechanical compactor with
required level, grade and camber etc. complete as specified and as
directed by the Engineer.

Removing the paver blocks of any thickness, size & colour from
carriage way or footpath & transporting the same to ward depot or any
R2-RW-3-22 where in MCGM limit. The paver blocks shall be stacked neatly at Sqm 157
specified location etc. complete as specified and as directed by the
Engineer.
Transporting & fixing the available muncipal paver blocks having any
type, size, shape, colour & thickness etc. on roads & footpaths.The
paver blocks shall be placed on average compacted thickness 25 mm
well graded sand cushioning uniformly compacted with proper capacity
R2-RW-3-23 mechanical compactor with required level, grade and camber etc. Sqm 240
complete as specified and as directed by the Engineer. (Rate is
incluive of transporting, loading and unloading of paver blocks from
ward depot or anywhere in MCGM limit to site and fixing the same etc.)

Providing & fixing in the footpath, 60 mm thickLacquer coated (

Reflective) interlocking white cement concrete pavers in red ( Terra
Cotta) Black, Brown, Lemon Yellowor any colour with vermeticular or
any antiskid texture on top surface of approved pattern/ shape and
colourhaving average crushing strength not less than 40 N/mm² as per
technical specification and IS CODE 15658:2006; manufactured in
doublelayer precast concrete blocks. The top layer of paver block
should be 12 to 15 mm thick and consist cubical shape stone
aggregate 8 mm size sieve 100% passing and retain on 4.75 mm size
sieve , silica sand and with pure iron oxide ultra voilet stabilized
R2-RW-3-24 pigment @ 5% by weight of white cement and should be coated with Sqm 927
lacquer having hard, high abrasive resistance and water repellent. The
bottom layer in grey cement should be 45 to 48 mm thick having 12
mm size sieve 100% passing aggregate as per technical specification
placed on average compacted thickness 25 mm well graded sand
cushioning uniformly compacted with proper capacity mechanical
compactor with required level, grade and camber etc. complete as
specified and as directed by the Engineer.

Page 9
 USoR 2018 Roads Department
Providing & fixing in the footpath, 80 mm thickLacquer coated (
Reflective) interlocking white cement concrete pavers in red ( Terra
Cotta) Black, Brown, Lemon Yellowor any colour with vermeticular or
any antiskid texture on top surface of approved pattern/ shape and
colourhaving average crushing strength not less than 50 N/mm² as per
technical specification and IS CODE 15658:2006; manufactured in
doublelayer precast concrete blocks. The top layer of paver block
should be 12 to 15 mm thick and consist cubical shapestone
aggregate 8 mm size sieve 100% passing and retain on 4.75 mm size
sieve, silica sand andwith pure iron oxide ultra voilet stabilized pigment
R2-RW-3-25 Sqm 1104
@ 5% by weight of white cement and should be coated with lacquer
having hard, high abrasive resistance and water repellent.The bottom
layer in grey cement should be 65 to 68 mm thick having 12 mm size
sieve 100% passing aggregate as per technical specificationplaced on
average compacted thickness 25 mm well graded sand cushioning
uniformly compacted with proper capacity mechanical compactor with
required level, grade and camber etc. complete as specified and as
directed by the Engineer.

Providing & fixing in the foothpath Interlocking concrete paver block

60mm thick Beganit ingrey/Black colour with Stonetexture on top
surface of approved pattern/ shape and colourhaving average
crushing strength not less than 40 N/mm² as per technical specification
and IS CODE 15658:2006; manufactured in double layer Interlocking
concrete paver blocks Beganit 12 to 15 mm thick and consist cubical
shape Quartz stone aggregate 8 mm sieve 100% passing and retain
R2-RW-3-26 on 4.75 mm size sieve, silica sand .The bottom layer should be 45 to Sqm 1538
48 mm thick in grey cement having 12 mm sieve 100% passing
aggregate as per technical specification, rested on average compacted
thickness 25 mm well graded sand cushioning uniformly compacted
with proper capacity mechanical compactor with required level, grade
and camber etc. complete as specified and as directed by the
Engineer.

Providing & fixing in the foothpath Concrete Paving Slabs(Flagstone)

400X400X60 mm thick or any approved size ingrey or any
specifiedcolour with shot blastedtextureor any approved texture on top
surface of approved pattern/ shape and colourhaving average
crushing strength not less than 40 N/mm² as per technical specification
and IS CODE 15658:2006; manufactured in doublelayer precast
concrete PavingSlabs (Flagstone) 12 to 15 mm thick and consist
cubical shapeQuartz stone aggregate 8 mm sieve 100% passing and
R2-RW-3-27 Sqm 1213
retain on 4.75 mm size sieve , silica sand .The bottom layer should be
45 to 48 mm thick in grey cement having 12 mm sieve 100% passing
aggregate as per technical specification, rested on average compacted
thickness 25 mm well graded sand cushioning uniformly compacted
with proper capacity mechanical compactor with required level, grade
and camber etc. complete as specified and as directed by the
Engineer.

Page 10
 USoR 2018 Roads Department
Providing & fixing in the foothpath Concrete Paver
blocks200X200X60mm thick or any approved size ingrey or any
specifiedcolour with shot blastedtextureor any approved texture on top
surface of approved pattern/ shape and colourhaving average
crushing strength not less than 40 N/mm² as per technical specification
and IS CODE 15658:2006; manufactured in doublelayer precast
concrete Paver blocks12 to 15 mm thick in top layer and consist of
cubical shape Quartz stone aggregate 8 mm sieve 100% passing and
R2-RW-3-28 Sqm 1042
retain on 4.75 mm size sieve, silica sand. The bottom layer should be
45 to 48 mm thick in grey cement having 12 mm sieve 100% passing
aggregate as per technical specification, rested on average compacted
thickness 25 mm well graded sand cushioning uniformly compacted
with proper capacity mechanical compactor with required level, grade
and camber etc. complete as specified and as directed by the
Engineer.

Providing & fixing in the foothpath Concrete Paver

blocks200X200X80mm thick or any approved size ingrey or any
specified colour with shot blastedtextureor any approved texture on top
surface of approved pattern/ shape and colourhaving average
crushing strength not less than 50 N/mm² as per technical specification
and IS CODE 15658:2006 manufactured in doublelayer precast
concrete Paver blocks 12 to 15 mm thick top layer and consistof
cubical shape Quartz stone aggregate 8 mm sieve 100% passing and
R2-RW-3-29 Sqm 1717
retain on 4.75 mm size sieve, silica sand. The bottom layer should be
65 to 68 mm thick in grey cement having 12 mm sieve 100% passing
aggregate as per technical specification, rested on average compacted
thickness 25 mm well graded sand cushioning uniformly compacted
with proper capacity mechanical compactor with required level, grade
and camber etc. complete as specified and as directed by the
Engineer.

Providing & fixing in the foothpath Concrete cobbles 100X100X60mm

thick or in any approved size in Grey colour or in any specified colour
with shot blastedtextureor any approved texture on top surface of
approved pattern/ shape and colourhaving average crushing strength
not less than 40 N/mm² as per technical specification and IS CODE
15658:2006; manufactured in doublelayer precast concrete Concrete
cobbles, 12 to 15 mm thick top layer and consist of cubical
shapeQuartz stone aggregate 8 mm sieve 100% passing and retain on
R2-RW-3-30 Sqm 1058
4.75 mm size sieve, silica sand .The bottom layer should be 45 to 48
mm thick in grey cement having 12 mm sieve 100% passing aggregate
as per technical specification, rested on average compacted thickness
25 mm well graded sand cushioning uniformly compacted with proper
capacity mechanical compactor with required level, grade and camber
etc. complete as specified and as directed by the Engineer.

Page 11
 USoR 2018 Roads Department
Providing & fixing in the carriageway/foothpath, 60 mm thick Heritage
paverinterlocking white cement concrete pavers in red (terra Cotta),
black, brown, lemon color with vermeticular or any antiskid texture on
top surface of approved pattern/ shape and color, having average
crushing strength not less than 40 N/mm² as per technical specification
and IS CODE15658:2006; manufactured in doublelayer precast
concrete blocks the top layer of paver block should be 12 to 15 mm
thick and consist cubical shapestone aggregate 8 mm sieve 100%
passing and retain on 4.75 mm size sieve, silica sand and with pure
R2-RW-3-31 iron oxide ultra voilet stabilized pigment @ 5% by weight of cement. Sqm 2335
The bottom layer should be 45 to 48 mm thick in grey cement having
12 mm sieve 100% passing aggregate as per technical specification,
rested on average compacted thickness 25 mm well graded sand
cushioning uniformly compacted with proper capacity mechanical
compactor with required level, grade and camber etc. complete as
specified and as directed by the Engineer.

Providing & fixing in the carriageway, 80 mm thick Heritage

paverinterlocking white cement concrete pavers in red (terra Cotta),
black, brown, lemon colorwith vermeticular or any antiskid texture on
top surface of aproved pattern/shape and color having average
crushing strength not less than 50 N/mm² as per technical specification
and IS CODE 15658:2006; manufactured in doublelayer precast
concrete blocks the top layer of paver block should be 12 to 15 mm
thick and consist cubical shapestone aggregate 8 mm sieve 100%
R2-RW-3-32 passing and retain on 4.75 mm size sieve , silica sand andwith pure Sqm 3039
iron oxide ultra voilet stabilized pigment @ 5% by weight of cement
.The bottom layer should be 65 to 68 mm thick in grey cement having
12 mm sieve 100% passing aggregate as per technical specification
rested on average compacted thickness 25 mm well graded sand
cushioning uniformly compacted with proper capacity mechanical
compactor with required level, grade and camber etc. complete as
specified and as directed by the Engineer.

Supply of shot blasted machine cut, coloured Granite of size 200 x 200
x 40mm thick to be fixed on prepared sub-base on a bed of min. 40mm
thick cushioning in C.M. 1:4 including neat cement float etc. filling
R2-RW-3-33 ofjoints in C.M. 1:2with grey cementto match the colour of cobble stone Sqm 2556
in the required pattern, design and as directed by the Engineer
incharge, including cleaning, curing etc. complete as specified and as
directed by the Engineer.
Providing & fixing in the carriageway/ footpath Vitrified Ceramic
Topping Paver Blocks of size 150 x 150 x 80mm thick in various colour
combination having average crushing strength not less than 50 N/mm²
as per technical specification and IS Code 15658:2006& vitrified
topping of 12 to 15 mm.The bottom layer should be 65 to 68 mm thick
R2-RW-3-34 in grey cement having 12 mm sieve 100% passing aggregate as per Sqm 1500
technical specification, rested on average compacted thickness 25 mm
well graded sand cushioning uniformly compacted with proper capacity
mechanical compactor with required level, grade and camber etc.
complete as specified and as directed by the Engineer.

Page 12
 USoR 2018 Roads Department
Providing & fixing in the carriageway/ footpath Vitrified Ceramic
Topping Paver Blocks of size 150 x 150 x 60mm thick in various colour
combination having average crushing strength not less than 40 N/mm²
as per technical specification and IS Code 15658:2006 & vitrified
topping of 12 to 15mm.The bottom layer should be 45 to 48 mm thick
R2-RW-3-35 in grey cement having 12 mm sieve 100% passing aggregate as per Sqm 1214
technical specification, rested on average compacted thickness 25 mm
well graded sand cushioning uniformly compacted with proper capacity
mechanical compactor with required level, grade and camber etc.
complete as specified and as directed by the Engineer.

Providing & fixing in the foothpath Concrete cobbles150X150X80mm

thick inGrey colour or any approved size ingrey or any specifiedcolour
with shot blastedtextureor any approved texture on top surface of
approved pattern/ shape and colourhaving average crushing strength
not less than 50 N/mm² as per technical specification; manufactured in
doublelayer precast concrete cobbles, 12 to 15 mm thick top layer and
consist of cubical shapeQuartz stone aggregate 8 mm sieve 100%
passing and retain on 4.75 mm size sieve, silica sand .The bottom
R2-RW-3-36 Sqm 1806
layer should be 65 to 68 mm thick in grey cement having 12 mm sieve
100% passing aggregate as per technical specification, rested on
average compacted thickness 25 mm well graded sand cushioning
uniformly compacted with proper capacity mechanical compactor with
required level, grade and camber etc. complete as specified and as
directed by the Engineer.

Providing and laying RED & BLACK GRANITE cobble stones of

100mm x 100mm x 100mm, 3 line dressing with 12 mm top layer in
size of fine cut and well dressed in Grey colour in paving on a bed of
min. 40 mm thick cushioning in C.M. 1:4 including neat cement float
R2-RW-3-37 Sqm 2593
etc. filling ofjoints in C.M. 1:2with grey cementto match the colour of
cobble stone in the required pattern, design and as directed by the
Engineer incharge, including cleaning, curing etc. complete.

Supply of hand finish top machine cut, 3 line dressing Cobble Stone in
size: 100 x 100 x 100mm in grey colour to be fixed on prepared sub-
base with cement mortar 1:4 40 mm thick and cement slurry, filling
ofjoints in C.M. 1:2with grey cementto match the colour of cobble stone
R2-RW-3-38 in the required pattern, design and as directed by the Engineer Sqm 2526
incharge, including cleaning, curing etc. complete as specified and as
directed by the Engineer.
NOTE: THIS ITEM SHOULD BE OPERATED ONLY AFTER SPECIFIC
SANCTION OF DIR(E.S.& P.)
Providing & fixing in the footpath Combi-Paver having average
crushing strength not less than 40 N/mm² as per technical
specifications and IS Code 15658:2006;shot blasted 60mm thick in
approved texture and colour and combination size 100 x 200, 125 x
200, 175 x 200, 225 x 200, 275 x 200 to be fixed on average
R2-RW-3-39 compacted thickness 25 mm well graded sand cushioning uniformly Sqm 1711
compacted with proper capacity mechanical compactor with required
level, grade and camber etc. complete as specified and as directed by
the Engineer.
NOTE: THIS ITEM SHOULD BE OPERATED ONLY AFTER SPECIFIC
SANCTION OF DIR(E.S.& P.)

Page 13
 USoR 2018 Roads Department
Providing & fixing in the wall Stone colour Wall Tiles, Design- Aries in
stone finish to be fixed in vertical wall with neat cementslurry in line and
level, joints filled with color cement grouting & finishing etc. complete
R2-RW-3-40 as specified and as directed by the Engineer. Sqm 1563
NOTE: THIS ITEM SHOULD BE OPERATED ONLY AFTER SPECIFIC
SANCTION OF DIR(E.S.& P.)

Providing and fixing of cement concrete Precast Header of M-50 grade

of size: 500 mm length x 325 mm height x 150 mm thickmanufactured
in wet press vacuum dewatering technology plant or equivalantwith
colour or any specified colour for Edge Restriction pimple finish for high
visibility with excellent quality and finish and edges perfect and
sharp.Including excavation in any soil except rock, laying a leveling
R2-RW-3-41 course of M 15 grade RMC 100 mm. thick, to required slope (inclusive Sqm 1661
of form work) jointing in C.M.1:2 proportion flush to concrete surface as
directed by engineer.(Header shall be procurred from MCGM
registered agencies).
NOTE: THIS ITEM SHOULD BE OPERATED ONLY AFTER SPECIFIC
SANCTION OF DIR(E.S.& P.)

Providing and fixing of cement concrete Kerb Stone of M-25 grade in

white cement with colour of size: 500mm width x 325 height x 165mm
thick (Half Batter, Bull Nose / Full Batter) manufactured in wet press
vacuum dewatering technology plant /equivalent with face pimple finish
for high visibility with excellent quality and finish and edges perfect and
sharp. Including excavation in any soil except rock, laying a leveling
R2-RW-3-42 course of M 15 grade RMC 100 mm thick, to required slope (inclusive Rmt 1560
of form work) jointing in C.M.1:2 proportion flush to concrete surface,
any shade as directed by engineer.(Kerbstones shall be procured from
MCGM registered agencies).NOTE: THIS ITEM SHOULD BE
OPERATED ONLY AFTER SPECIFIC SANCTION OF DIR(E.S.& P.)

Removing& refixing interlockingconcrete pavers of 80 mm thick, of any

size, shape and colour 200X200X80mm thick ingrey colour with shot
blastedtexture on top surface, 80 mm thick Heritage paverinterlocking
white cement concrete pavers in red ( Terra Cotta) Black, Brown lemon
colour with vermeticular or any antiskid texture on top surface,Vitrified
Ceramic Topping Paver Blocks of size 150 x 150 x 80mm thick in
various colour combination)(RW-3.29,3.32,3.34)considering 10%
breakage area of paver block while removing same from position and
R2-RW-3-43 replacing the same by new paver blocks having average Sqm 350
crushingstrength not less than 50 N/mm² as per technical specification
and IS code 15658:2006; placed on average compacted thickness 25
mm well graded sand cushioning uniformly compacted with proper
capacity mechanical compactor with required level, grade and camber
etc. complete as specified and as directed by the Engineer.

Page 14
 USoR 2018 Roads Department
Removing& refixing interlockingConcrete PavingSlabs(Flagstone)
400X400X60mm thick ingrey colour with shot blastedtexture on top
surface in various colour combination (RW-3.27) considering 10%
breakage area of paver block while removing same from position and
replacing the same by new paver blocks having average
R2-RW-3-44 crushingstrength not less than 40 N/mm² as per technical specification Sqm 259
and IS code 15658:2006; placed on average compacted thickness 25
mm well graded sand cushioning uniformly compacted with proper
capacity mechanical compactor with required level, grade and camber
etc. complete as specified and as directed by the Engineer.

Removing& refixing interlockingconcrete pavers of 60 mm thick of any

size, shape and colour (Began it in grey/Black colour with Stonetexture
on top surface,200X200X60mm thick ingrey colour with shot
blastedtexture on top surface, Concrete cobbles100X100X60mm thick
inGrey colour with shot blastedtexture on top surface,60 mm thick
Heritage paverinterlocking white cement concrete pavers in red ( Terra
Cotta) Black, Brown lamen colour with vermeticular or any antiskid
texture on top surface, Vitrified Ceramic Topping Paver Blocks of size
150 x 150 x 60mm thick in various colour combination,combi-paver 6O
MM)(RW-3.26,3.28,3.30,3.31,3.35,3.39) considering 10% breakage
R2-RW-3-45 Sqm 290
area of paver block while removing same from position and replacing
same by new paver blocks having average crushingstrength not less
than 40 N/mm² as per technical specification and IS Code 15658:2006;
placed on average compacted thickness 25 mm well graded sand
cushioning uniformly compacted with proper capacity mechanical
compactor with required level, grade and camber etc. complete as
specified and as directed by the Engineer.

IV KERB STONE
Providing & Fixing kerb stones 30 cm.to 40 cm. long., 15 cm. wide,38
cm. deep medium dressed in all exposed surfaces, set in cement
R2-RW-4-01 mortar 1:2 on a 15 cm. thick and 25 cm. wide RMC M-20 C.C. bed Rmt 605
including filling the joints with 1:2 C.M. pointing, curing etc. complete.

Removing & resetting kerb stones in 1:2 C.M. on newR.M.C.M-20C.C.

R2-RW-4-02 bed15 cm, thick including filling the joints with 1:2 C.M. pointing, curing Rmt 351
etc. complete.
Removing existing kerb stones, cleaning off old mortar, carting away
R2-RW-4-03 up to a distance of 2 K.M. and stacking the same as directed by the Rmt 32
Engineer.
Extra over aboverates of carting for additional distance of every 2 KM.
R2-RW-4-04 Rmt 5
or part thereof .
Cementpointing to existing kerb stones after taking out old mortar to a
R2-RW-4-05 depth of 20 mm. including filling the joints with cement mortar 1:2 and Rmt 20
curing etc. complete.
Providing & fixing water tables of stone of size 30 cm. wide and 10 cm.
thick, fairly dresed ona R.M.C.M-20 cement concrete bed 15 cm. thick,
R2-RW-4-06 including filling in the joints, with cement mortar 1:2 cement pointing, Rmt 462
curing etc. complete as specified and as directed by the Engineer.

Removing & resetting water tables 30 cm. wide on a new M-20 cement
concrete bed 15 cm .thickincludingfilling in the jointswith C.M.1:2 and
R2-RW-4-07 Rmt 398
cement pointing , curing including removing the old cementbed, curing
etc. complete.

Page 15
 USoR 2018 Roads Department
Removing existing water tables/cleaning off old mortar & carting away
R2-RW-4-08 to the distance of 2 K.M. and stacking the same as directed by Rmt 32
Engineer.
Extra over and above for an additional distance ofevery 2 K.M. or part
R2-RW-4-09 Rmt 2.5
thereof.
Providing and fixing single row of setts 15 cm. to 25 cm. long, 10 cm.
wide and 15 cm. deep fair dressed on top and medium dressed on
R2-RW-4-10 other sides on 15 cm. thick and 15 cm. wide R.M.C. M-20 C.C. bed Rmt 335
including filling the joints with C.M. 1:2 andcement pointing , curing etc.
complete.
Removing and resetting single row of sets on a 15 cm. thick and 15
R2-RW-4-11 cm. wide R.M.C. M-20 c.c. bedincluding fillingin the joints with C.M. 1:2 Rmt 219
andcement pointing , curing etc. complete.
Providing and fixingdouble row of sett stones15 cm. to 25 cm. long, 10
cm. wide and 15 cm. deep fair dressed on top and medium dressed on
other sides on 15 cm. thick and 25 cm. wide on R.M.C. M-20 C.C. bed,
R2-RW-4-12 Rmt 620
including filling the joints with C.M. 1:2 andcement pointingand
removingold concrete bed, curing etc. complete.

Removing & resettingdouble row of sett stoneson R.M.C. M-20 C.C.

bed,15 cm. thick and 25 cm. wide including filling the joints with C.M.
R2-RW-4-13 Rmt 372
1:2 andcement pointingand removingold concrete bed, curing etc.
complete.
Removingexisting sets, cleaning off old mortar and carting away to a
R2-RW-4-14 distance of 2 KM and stacking the same as directed by the Engineer. Rmt 49

Extra over above rate for a lead of every additional 2 KM or part

R2-RW-4-15 100 Rmt 123
thereof
V BITUMINOUS ITEMS
Supplying & spreading of one or more layers of compacted crushed
coarse agg. with alternate application of bituminous binder & key
aggregate with the requirements of MORTH, Rolling with 10/12 MT
roller using VG-30 grade bitumen (1% Antistripping agent) to serve as
base course and inconformity with the line, level and cross sections
R2-RW-5-01 Sqm 373
shown on the drawings or as directed by the Egg., thickness of
individual course shall not exceed 75 mm.
(As per prevailing MCGM specification for RoadworksClause No. 352)

Supplying & spreading of one or more layers of compacted crushed

coarse agg. with alternate application of bituminous binder & key
aggregate with the requirements of MORTH, Rolling with 10/12 mt
roller using VG-30 grade bitumen (1% Antistripping agent) to serve as
R2-RW-5-02 base course and inconformity with the line, level and cross sections Sqm 285
shown on the drawings or as directed by the Egg., thickness of
individual course shall not exceed 50 mm.
(As per prevailing MCGM specification for Roadworks Clause No. 352)

P/L premixhot mix Bituminous concrete with 6.00%ofVG-30 bitumen

content by weight of mix surface coat tocompacted thickness of40
mm.using new material to the required grade, level and camberrolling
with vibratory roller , power roller,pnumatic roller & using sensor paver
R2-RW-5-03 etc. complete as specified and as directed with addition of lime filler 2% Sqm 441
by weight of mix and anti stripping agent @ 1% of bitumen etc.(As per
prevailing MCGM specification for Roadworks Clause No. 364)

Page 16
 USoR 2018 Roads Department
P/LMINIMUM 30 mm hot Premix Bituminous concrete with6.00% of VG-
30 grade bitumen using new material any where as directed including
Rolling with 10 MT Pneumatic, power & vibratory roller & using sensor
R2-RW-5-04 paver to the required grades, level, camber with line filler of 2% by Sqm 339
weight & antistripping agent @ 1% of bitumen content by weight etc.
complete.(As per prevailing MCGM specification for Roadworks clause
no.364)
P/L Premix hot mixed Bituminous macadam with minimum 3.30% (
with tolerance of+/-0.3)of VG-30 Bitumen by weight of mix to the
required grade, level & camber, rolling with 10/12 tonnes power roller,
vibratory roller & sensor paver complete& as specified & as directed,
R2-RW-5-05 tothickness of 65 mm. With antistripping agent 1% by weight of Sqm 370
bitumen (using 30% reconditioned milling material).(As per prevailing
MCGM specification for RoadworksClause No. 380)

P/L hot mixed graded Bituminous macadam with3.30%( with tolerance

of+/-0.3)of VG-30Bitumen by weight of mixto the required grade, level
& camber, rolling with 10/12 tonnes power roller, vibratory roller &
R2-RW-5-06 sensor paver etc. complete as specified & as directed using gradingII Sqm 410
of MORTH & addingantistripping agent at the rate of 1% of bitumen by
weight to athickness of 65 mm.(using new materials).(As per prevailing
MCGM specification for Roadworks Clause No.351)
P/L hot mixed graded Bituminous macadam with3.30%( with tolerance
of+/-0.3)of VG-30 Bitumen by weight of mixusing reconditioned milling
material and adding antistripping agent at the rate of 1% of bitumen, by
R2-RW-5-07 weightto the required thickness, to bring the road to proper level, & Cum 5691
camber rolling with power roller, Vibratory roller & sensor
paveretc.(This item will be paid on volumetric basis by computing its
dimensions by actual measurements).( Using reconditioned milling
material 30% )(As per prevailing MCGM specification for Roadworks
P/L hot mixed graded Bituminous Macadam with3.30% ( with tolerance
of+/-0.3)of VG-30Bitumen by weight of mix using reconditioned milling
material to the required grade, level & camber, rolling with 10/12
tonnes power roller ,vibratory roller & sensor paver complete as
R2-RW-5-08 Sqm 427
specified & as directed tothickness of 75 mm with antistripping agent at
the rate of 1% by weight of bitumen. ( Using reconditioned milling
material 30% )(As per prevailing MCGM specification for Roadworks
Clause No. 380)
P/L hot mixed graded Bituminous macadam with3.30% ( with tolerance
of+/-0.3)of VG-30 Bitumen by weight of mixto the required grade, level
and camber, rolling with 10/12tones power roller, vibratory roller &
sensor paver etc. complete as specified and as directed, using
R2-RW-5-09 Sqm 475
gradingof II 'MoRTH" and adding anti strippingagentat the rate of 1% of
weight of bitumen ) to thickness of 75 mm. ( using new material) (As
per prevailing MCGM specification for Roadworks Clause No. 351)

P/L hot mixed graded Bituminous macadam with3.30% ( with tolerance

of+/-0.3)of VG-30Bitumen by weight of mixto the required grade, level
and camber, rolling with 10/12tones power roller, vibratory roller &
sensor paver etc. complete as specified and as directed, using
R2-RW-5-10 Sqm 315
gradingof II 'MoRTH" and adding anti strippingagent1% of by weight of
bitumen )do--do-- to thickness of 50mm.(using new material).(As per
prevailing MCGM specification for Roadworks Clause No. 351)

Page 17
 USoR 2018 Roads Department
P/L hot mixed graded Bituminous Macadam with3.30%( with tolerance
of+/-0.3)of VG-30. Bitumen by weight of mixusing new material and
adding antistripping agent at the rate of 1% of bitumen by weight, to the
required thickness to bring the road to propergrade, level & camber,
rolling with 10/12 tonnes power roller, vibratory roller & using sensor
R2-RW-5-11 paver, etc. complete as specified & as directed. (This item will be used Cum 6303
as levelling coarse & will be paid on volumetric basis by computing its
unit Cu.M. dimensions by actual measurements.) (using new
material).(As per prevailing MCGM specification for RoadworksClause
No. 351)

P/L hot mixed graded Bituminous Macadam with3.30%( with tolerance

of+/-0.3)of VG-30Bitumen by weight of mixto the required grade, level
& camber,& rolling with 3 tonnes roller etc. complete as specified & as
R2-RW-5-12 directed, using grading II of 'MoRTH' to a required thickness of 50 Sqm 300
mm.(to be used in the case of footpath only). (As per prevailing MCGM
specification for RoadworksClause No. 351)

Supplying & layingof BITUMINOUS COLD MIXES work by using new

material Rolling with power roller, vibratory roller & using sensor paver.(
R2-RW-5-13 CUTBACK BITUMEN Grade-MC) As per Mix design Morth 5th Cum 10781
Revision April 2013 & as per prevailing MCGM specification for
RoadworksClause no.317
Supplying & layingof BITUMINOUS COLD MIXES work by using new
material Rolling with power roller, vibratory roller & using sensor
R2-RW-5-14 paver.(Bitumen – CATTIONIC EMULSION Grade-MS) As per Mix Cum 10475
design Morth 5th Revision April 2013 & as per prevailing MCGM
specification for Roadworks Clause no.317
P/L hot mixed premix seal coat 10mm.thick with 5.65% (with tolerance
R2-RW-5-16 of+ 0.3 ) of VG-30Bitumen by weight of mix bitumen content including Sqm 101
rolling by 8-10T Vibratory Rolleretc. complete.
P/LTYPE A Seal Coat using Bitumen - VG-30 Grade including rolling
by 8-10T Vibratory Roller. As per Mix design Morth 5th revision April
R2-RW-5-17 Sqm 73
2013 & as per prevailing MCGM specification for Roadworks Clause
no.370
P/L hot mixed premix seal coat 10mm.thick with 5.65% (with tolerance
of+ 0.3 ) of VG-30Bitumen by weight of mix bitumen content including
rolling with 3 tone roller etc. complete as directed (to be used for
R2-RW-5-18 Sqm 91
footpath only) with antistripping agent 1% by weight of bitumen. (As per
prevailing MCGM specification for Roadworks Clause No. 370 )

P/L compactingOpen Graded Premix Carpet of 20 mm thickness in a

single coarse composed suitable small size aggregate Pre-mixed with
a bituminous binder content of 14.60 Kg/10sqmt. on a previously
R2-RW-5-19 prepared based in accordance with a requirement of Morth 5th Sqm 138
Revision 2013.(As per prevailing MCGM specification for Roadworks
clause no.360).Seal coat to be paid separately.

Page 18
 USoR 2018 Roads Department
Providing and applying PRIME COAT with CATIONIC BITUMEN
EMULSION (SS) @ 7 to 12 Kg. of 10Sqmt. over prepared surface to
receive bituminous mix by applying PRIMER with mechanical spray
bitumen, including cleaning of road surface etc.completed, as
directedFor Low Porosity surface & the primed surface shall be allowed
R2-RW-5-20 to cure for at least 24 hours or any other higher period, as is found to Sqm 57
be necessary to allow all the moisture or volatiles to evaporate before
any subsequent bituminous surface treatment or mix is laid (As per
prevailing MCGM specification for RoadworksClause No. 313, curing
as per 313.5)

Providing and applying PRIME COAT with CATIONIC BITUMEN

EMULSION (SS) @ 9 to 12 Kg. of 10Sqmt. over prepared surface to
receive bituminous mix by applying PRIMER with mechanical spray
bitumen, including cleaning of road surface etc.completed, as
directedFor Medium Porosity surface & the primed surface shall be
R2-RW-5-21 allowed to cure for at least 24 hours or any other higher period, as is Sqm 62
found to be necessary to allow all the moisture or volatiles to evaporate
before any subsequent bituminous surface treatment or mix is laid. (As
per prevailing MCGM specification for Roadworks Clause No.
313,curing as per 313.5)

Providing and applying PRIME COAT with CATIONIC BITUMEN

EMULSION (SS) @ 12 to 15 Kg. of 10Sqmt. over prepared surface to
receive bituminous mix by applying PRIMER with mechanical spray
bitumen, including cleaning of road surface etc.completed, as
directedFor High Porosity surface & the primed surface shall be
R2-RW-5-22 allowed to cure for at least 24 hours or any other higher period, as is Sqm 72
found to be necessary to allow all the moisture or volatiles to evaporate
before any subsequent bituminous surface treatment or mix is laid (As
per prevailing MCGM specification for Roadworks Clause No.
313,curing as per 313.5)

Providing and applying TACK COAT with CATIONIC BITUMEN

EMULSION (RS) @ 0.2 to 0.25 Kg. of Sq.mt. over prepared surface to
receive bituminous mix by applying TACK COAT with mechanical
spray bitumen, including cleaning of road surface etc.completed, as
directedFor NORMAL BITUMINOUS SURFACES & the tack coat shall
R2-RW-5-23 Sqm 33
be left to cure until all the volatiles have evaporated before any
subsequent construction is started, which is indicated by change in
colour from brown to black (As per prevailing MCGM specification for
Roadworks Clause No. 314, curing as per 314.3.4)

Providing and applying TACK COAT with CATIONIC BITUMEN

EMULSION (RS) @ 0.25 to 0.30 Kg. of Sq.mt. over prepared surface
to receive bituminous mix by applying TACK COAT with mechanical
R2-RW-5-24 spray bitumen, including cleaning of road surface etc.completed, as Sqm 35
directedFor DRY & HUNGRY BITUMINOUS SURFACES (As per
prevailing MCGM specification for Roadworks Clause No. 314)

Providing and applying TACK COAT with CATIONIC BITUMEN

EMULSION (RS) @ 0.25 to 0.30 Kg. of Sq.mt. over prepared surface
to receive bituminous mix by applying TACK COAT with mechanical
R2-RW-5-25 spray bitumen, including cleaning of road surface etc.completed, as Sqm 35
directedForGRANULAR SURFACES Treated with PRIMER (As per
prevailing MCGM specification for Roadworks Clause No. 314)

Page 19
 USoR 2018 Roads Department
Providing and applying TACK COAT with CATIONIC BITUMEN
EMULSION (RS) @ 0.30 to 0.35 Kg. of Sq.mt. over prepared surface
to receive bituminous mix by applying TACK COAT with mechanical
R2-RW-5-26 spray bitumen, including cleaning of road surface etc.completed, as Sqm 37
directedForNON BITUMINOUS SURFACES CEMENT CONCRETE
PAVEMENT (As per prevailing MCGM specification for Roadworks
Clause No. 314)
Providing and applying TACK COAT with bitumen VG-30bitumen @
0.20 to 0.25 Kg. of Sq.mt. over prepared surface to receive bituminous
mix by applying TACK COAT with mechanical spray bitumen, including
R2-RW-5-27 cleaning of road surface etc.completed, as directedFor NORMAL Sqm 32
BITUMINOUS SURFACES (As per prevailing MCGM specification for
RoadworksClause No. 314)

Providing and applying TACK COAT with bitumen VG-30 bitumen @

0.25 to 0.30 Kg. of Sq.mt. over prepared surface to receive bituminous
mix by applying TACK COAT with mechanical spray bitumen, including
R2-RW-5-28 cleaning of road surface etc.completed, as directedFor DRY & Sqm 34
HUNGRY BITUMINOUS SURFACES (As per prevailing MCGM
specification for Roadworks Clause No. 314)

Providing and applying TACK COAT with bitumen VG-30 bitumen @

0.25 to 0.30 Kg. of Sq.mt. over prepared surface to receive bituminous
mix by applying TACK COAT with mechanical spray bitumen, including
R2-RW-5-29 cleaning of road surface etc.completed, as directed ForGRANULAR Sqm 34
SURFACES Treated with PRIMER (As per prevailing MCGM
specification for RoadworksClause No. 314)

Providing and applying TACK COAT with bitumen VG-30bitumen @

0.30 to 0.35 Kg. of Sq.mt. over prepared surface to receive bituminous
mix by applying TACK COAT with mechanical spray bitumen, including
R2-RW-5-30 cleaning of road surface etc.completed, as directed ForNON Sqm 35
BITUMINOUS SURFACES CEMENT CONCRETEPAVEMENT (As per
prevailing MCGM specification for Roadworks Clause No. 314)

P/L Mastic Asphalt25mm. thick as per I.S. code No. 5317/2002.(As per
R2-RW-5-32 prevailing MCGM specification for Roadworks Clause No. 365) Sqm 615

P/L Mastic Asphalt40 mm. thick as per I.S. code No. 5317/2002.(As
R2-RW-5-33 per prevailing MCGM specification for Roadworks Clause No. 365) Sqm 985

P/L Mastic Asphalt 50 mm. thick as per I.S. code No. 5317/2002.(As
R2-RW-5-34 per prevailing MCGM specification for Roadworks Clause No. 365) Sqm 1231

P/L Premix Bituminous concrete with 6.00%content by weight of mix

with polymer modified bitumen(surface coat to thickness of about
40mm(compacted thickness) using new material to the required grade,
level & camber rolling with vibratory roller & power roller,pnumatic roller
R2-RW-5-36 Sqm 465
& using sensor paver etc. complete as specified as directed with
addition of lime filler etc. complete.(bitumen of grade PMB-40). (As per
prevailing MCGM specification for Roadworks clause no.364)

Page 20
 USoR 2018 Roads Department
P/L Minimum 30 mm ThickBituminous concrete with 6.00% content by
weight of mix polymer modified bitumen (PMB - 40of grade VG-30)
surface coat (compacted thickness) using new material to therequired
grade, level & camber rolling with power roller, vibratory roller,pnumatic
R2-RW-5-37 Sqm 349
roller & using sensor paveretc. complete as specified as directed with
addition of lime filler etc. complete.( As per prevailing MCGM
specification for Roadworks clause no.364)

P/L Premix Bituminous concrete with 6.00% rubberished modified

bitumen surface coat to thickness of40mm (compacted thickness)
using new material to the required grade, level & camberrolling with
vibratory roller ,power roller, & pneumatic rolleras specified as directed
R2-RW-5-38 Sqm 419
with addition of lime filler etc. Complete.(bitumen of grade CRMB-60 of
grade VG-30) (As per prevailing MCGM specification for Roadworks
clause no.364)

P/L MINIMUM 30 mm thick Bituminousconcrete with 6.00% content by

weight of mixrubberished modified bitumen (CRMB-60 of grade VG-
30)surface coat using new material to the required grade, level &
camber using vibratory roller, power roller, pneumatic roller & using
R2-RW-5-39 Sqm 315
sensor paver, etc. complete as specified as directed with addition of
lime filler etc. Complete.(As per prevailing MCGM specification for
Roadworks clause no.364)

P/L hot premix Bituminous concrete with6.00% of bitumen grade VG-

40,surface coat by mix design as per MORTH to the compacted
thickness of 40 mm ,using new material to the required line, level and
camber rolling with power vibratory roller & sensor paver,etc. Complete
R2-RW-5-40 Sqm 450
as specified and as directed with lime filler 2%by weight and
antistripping agent @ 1% of bitumen by weight etc.complete.per
prevailing MCGM specification for Roadworks clause no.364)

P/L MINIMUM 30 mmcompactedthick hot Premix Bituminous concrete

with6.00% of VG-40 grade bitumen using new material any where as
directed including Rolling with 10/12 MTpower ,vibratory roller & sensor
R2-RW-5-41 paver to the required line, level, camber with line filler of 2% by weight Sqm 338
& antistripping agent @ 1% of bitumen content by weight etc.
complete.(per prevailing MCGM specification for Roadworks clause
no.364)
P/L hot Premix seal coat 10 mm thickincluding rollingetc. complete as
R2-RW-5-42 specified & directed bitumen of VG-40 grade content average 5.65% Sqm 108
by weight.
P/L hot PremixDense bituminous macadam with 4.50%bitumen
content of grade VG-40 to the required line,level,and camber rolling
with 10/12 M.T.power ,vibratory roller & sensor paveretc. complete as
R2-RW-5-43 specified and as directed to thickness of 65 mm. with antistripping Sqm 586
agent at 1%by weight of bitumen using grading II of "MORTH"(As per
prevailing MCGM specification for Roadworksclause no.354)

P/L hot PremixDense bituminous macadam with 4.50%bitumen

content of grade VG-40 to the required line,level,and camber rolling
with 10/12 M.T.power ,vibratory roller & sensor paveretc. complete as
R2-RW-5-44 specified and as directed to thickness of 50 mm. with antistripping Sqm 450
agent at 1%by weight of bitumen using grading II of "MORTH"(per
prevailing MCGM specification for Roadworks clause no.354)

Page 21
 USoR 2018 Roads Department
P/L hot PremixDense bituminous macadam with 4.50%bitumen
content of grade VG-40 to the required line,level,and camber rolling
with 10/12 M.T.power ,vibratory roller & sensor paveretc. complete as
R2-RW-5-45 specified and as directed to thickness of 75 mm. with antistripping Sqm 676
agent at 1% by weight of bitumen using grading II of "MORTH"(per
prevailing MCGM specification for Roadworks clause no.354)

P/L hot PremixDense bituminous macadam with 4.50%bitumen

content of grade VG-40 to the required line,level,and camber rolling
with 10/12 M.T.power ,vibratory roller & sensor paveretc. complete as
R2-RW-5-46 Cum 9008
specified and as directed with antistripping agent at 1%by weight of
bitumen using grading II of "MORTH"(per prevailing MCGM
specification for Roadworks clause no.354)
P/L hot PremixDense bituminous macadam with 4.50%bitumen
content of grade VG-30 to the required line,level,and camber rolling
with 10/12 M.T.power ,vibratory roller & sensor paveretc. complete as
R2-RW-5-47 specified and as directed to thickness of 65 mm. with antistripping Sqm 572
agent at 1%by weight of bitumen using grading II of "MORTH"(per
prevailing MCGM specification for Roadworks clause no.354)

P/L hot PremixDense bituminous macadam with 4.50%bitumen

content of grade VG-30 to the required line,level,and camber rolling
with 10/12 M.T.power ,vibratory roller & sensor paveretc. complete as
R2-RW-5-48 specified and as directed to thickness of 50 mm. with antistripping Sqm 440
agent at 1% by weight of bitumen using grading II of "MORTH"(per
prevailing MCGM specification for Roadworks clause no.354)

P/L hot PremixDense bituminous macadam with 4.50%bitumen

content of grade VG-30 to the required line,level,and camber rolling
with 10/12 M.T.power ,vibratory roller & sensor paveretc. complete as
R2-RW-5-49 specified and as directed to thickness of 75 mm. with antistripping Sqm 660
agent at 1% by weight of bitumen using grading II of "MORTH"(per
prevailing MCGM specification for Roadworksclause no.354)

P/L hot PremixDense bituminous macadam with 4.50%bitumen

content of grade VG-30 to the required line,level,and camber rolling
with 10/12 M.T.power ,vibratory roller & sensor paveretc. complete as
R2-RW-5-50 Cum 8797
specified and as directed with antistripping agent at 1%by weight of
bitumen using grading II of "MORTH"(As per prevailing MCGM
specification for Roadworksclause no.354)
P/L premixhot mix Bituminous concrete with 6.00%ofVG-30 bitumen
content by weight of mix surface coat tocompacted to required
thickness using new material to the required grade, level and
camberrolling with power, vibratory roller pneumatic roller & sensor
R2-RW-5-51 Cum 10974
paver, etc. complete as specified and as directed with addition of lime
filler 2% and anti stripping agent @ 1% by weight of bitumenetc.(As per
prevailing MCGM specification for Roadworksclause no. 364)

P/L premixhot mix Bituminous concrete with 6.00% of polymer modified

bitumen (PMB-40) (VG-30) content by weight of mix surface coat to
compacted to required thicknessusing new material to the required
grade, level and camberrolling with power roller, vibratory
R2-RW-5-52 roller,pnumatic roller& sensor paver,etc. complete as specified and as Cum 11636
directed with addition of lime filler 2% and anti stripping agent @ 1% by
weight of bitumenetc.(As per prevailing MCGM specification for
Roadworksclause no.364)

Page 22
 USoR 2018 Roads Department
P/L premixhot mix Bituminous concrete with 6.00% of rubberised
modified bitumen (CRMB-60) (VG-30)content by weight of mix surface
coat tocompacted to required thickness using new material to the
required grade, level and camberrolling with power roller, vibratory
R2-RW-5-53 roller pneumatic roller & sensor paver etc. complete as specified and Cum 10487
as directed with addition of lime filler 2% and anti stripping agent @ 1%
by weight of bitumenetc.(As per prevailing MCGM specification for
Roadworks clause no.364)

P/L premixhot mix Bituminous concrete with 6.00%of VG-40

gradebitumen content by weight of mix surface coat tocompacted to
required thickness using new material to the required grade, level and
camberrolling with power roller, vibratory roller pneumatic roller&
R2-RW-5-54 Cum 11261
sensor paver etc. complete as specified and as directed with addition
of lime filler 2% and anti stripping agent @ 1% by weight of
bitumenetc.(As per prevailing MCGM specification for Roadworks
clause no.364)
P/L premixhot mixforSEMI- DENSE BITUMINOUS CONCRETE work
by using new material Rolling with power roller, vibratory roller,
R2-RW-5-55 pneumatic roller, using sensor paver.(Bitumen – VG-30 Grade)( As per Cum 9441
Mix design Morth 5th Revision 2013 & per prevailing MCGM
specifications for roadworks clause no.363.)
P/L CLOSE graded PREMIX CARPET withCationic Bitumen Emulsion
Grade(MS) compacted thickness of20 mm.Rolling with power roller &
R2-RW-5-56 sensor paver . As per Mix design Morth 5th Revision 2013 (As per Sqm 130
prevailing MCGM specification for Roadworks (TYPE A) Clause
no.362)
P/Lfor CLOSE GRADED PREMIX CARPET (TYPE A)(MSS)
withBitumen Grade VG-30compacted thickness of20 mm. Rolling with
R2-RW-5-57 power roller & using sensor paver. As per Mix design Morth 5th Sqm 177
Revision 2013 & as per prevailing MCGM specification for Roadworks
Clause no.363
P/L for Open Graded Premix Carpet 20 mm thick using Paving Grade
Bitumen VG-30 Rolling with power roller, vibratory roller, & sensor
R2-RW-5-60 paver.As per Mix design Morth 5th Revision 2013 & per prevailing Sqm 127
MCGM specification for Roadworks clause no.361.

P/L Dense Bituminous macadam using Recycled material Rolling with

power roller, vibratory roller ,using sensorpaver.(Bitumen – VG-30
R2-RW-5-61 Grade). As per Mix design Morth 5th Revision 2013 & per prevailing Cum 7750
MCGM specification for Roadworksclause no.380.

E.O. for use of PNUEMATICROLLERfor compacting Bituminous

R2-RW-5-62 Sqm 35
Concrete as specified & as directed
P/L, mastic asphalt 40mm thick with 10/20 grade bitumen including
producing the same at computerised batch mix plant, transporting the
same to site by means of mastic cookers, laying the same with mastic
paver and including all necessary tools, labours & barricading,
spreading of aggregates as antiskid measures by means over newly
R2-RW-5-63 Sqm 1660
laid mastic asphalt as per MCGM specification clause no. 365 of
'Roadworks' as directed by Engineer in charge (Note: The material
specifications / gradation & content shall be as specified in the relevant
I.S. Codes.)

Page 23
 USoR 2018 Roads Department
P/L, mastic asphalt 40mm thick with 10/20 grade bitumen including
producing the same at computerised batch mix plant, transporting the
same to site by means of mastic cookers, laying the same without
mastic paver and including all necessary tools, labours & barricading,
spreading of aggregates as antiskid measures by means over newly
R2-RW-5-64 Sqm 1571
laid mastic asphalt as per prevailing MCGM specification clause no.
365 of 'Road work' as directed by Engineer in charge (Note: The
material specifications / gradation & content shall be as specified in the
relevant I.S. Codes.)

P/L, mastic asphalt 25mm thick with 10/20 grade bitumen including
producing the same at computerised batch mix plant, transporting the
same to site by means of mastic cookers, laying the same with mastic
paver and including all necessary tools, labours & barricading,
spreading of aggregates as antiskid measures by means over newly
R2-RW-5-65 Sqm 1079
laid mastic asphalt as per prevailing MCGM specification clause no.
365 of 'Roadworks' as directed by Engineer in charge (Note: The
material specifications / gradation & content shall be as specified in the
relevant I.S. Codes.)

Rebate for not using PNUEMATIC TYRE ROLLER INSTEAD OF

R2-RW-5-69 POWER ROLLER USED for copmaction of BITUMINOUS MIXES Sqm -20

Rebate for not using VIBRATORY ROLLER INSTEAD OF POWER

R2-RW-5-70 Sqm -1
ROLLER usedfor copmaction of BITUMINOUS MIXES
Rebate for not using SENSOR PAVER INSTEAD OF ORDINARY
R2-RW-5-71 Sqm -7
PAVER USED for Laying of BITUMINOUS MIXES
Rebate for not using PNUEMATIC TYRE ROLLER INSTEAD OF
R2-RW-5-72 VIBRATORYROLLER USED for copmaction of BITUMINOUS MIXES Sqm -20

P/L hot premix Bituminous concrete with 5 to 6 % of bitumen grade VG

40,surface coat by mix design as per MORTH, having gradation of
aggregates of grading 1, to the compacted thickness of 50 mm ,using
new material to the required line,level and camber rolling with power
R2-RW-5-74 Sqm 568
vibratory roller &sensor paver, etc.complete as specified and as
directed with lime filler 2%by weight and antistriping agent @ 1% of
bitumen by weight etc.complete.As per new Road Specification clause
no.364)
Supplying & layingof BITUMINOUS COLD MIXES work by using new
material Rolling with power roller, vibratory roller & using sensor paver
for repairing a pothole having depth upto 20 mm.(Bitumen – CATIONIC
R2-RW-5-75 Cum 189
EMULSION Grade-MS) As per Mix design Morth 5th Revision April
2013 & per prevailing MCGM specification for Roadworks Clause
no.317
Supplying & layingof BITUMINOUS COLD MIXES work by using new
material Rolling with power roller, vibratory roller & using sensor paver
for repairing a pothole having depth above 20 to 40 mm.(Bitumen –
R2-RW-5-76 Cum 377
CATIONIC EMULSION Grade-MS) As per Mix design Morth 5th
Revision April 2013 & per prevailing MCGM specification for
Roadworks Clause no.317

Page 24
 USoR 2018 Roads Department
Supplying & layingof BITUMINOUS COLD MIXES work by using new
material Rolling with power roller, vibratory roller for repair to pothole
having depth above 40 mm and upto 100 mm.(Bitumen – CATIONIC
EMULSION Grade-MS). As per Mix design Morth 5th Revision April
2013 & as per prevailing MCGM specification for Roadworks Clause
R2-RW-5-77 no.317. Minimum depth of cold mix should be 40mm, applying tack Cum 477
coat / emulsion and remaining depth of pothole to be filled with sand,
metal, Gravely sand corrosponding to Class II/III Grading of table 100.1
of new Road Specifications for Roadworks and waterning, ramming etc
as complete as directed by the Engineer in charge

Supplying & layingof BITUMINOUS COLD MIXES work by using new

material Rolling with power roller, vibratory roller for repair to pothole
having depth above 100mm and upto 150 mm.(Bitumen – CATIONIC
EMULSION Grade-MS). As per Mix design Morth 5th Revision April
2013 & as per prevailing MCGM specification for Roadworks Clause
R2-RW-5-78 no.317. Minimum depth of cold mix should be 40mm, applying tack Cum 561
coat / emulsionand remaining depth of pothole to be filled with sand,
metal, Gravely sand corresponding to Class II/III Grading of table 100.1
of new Road Specifications for Roadworks and waterning, ramming etc
as complete as directed by the Engineer in charge

VI MASON
Providing UCR in c m 1:5 using municipal rubble etc. complete as
R2-RW-6-01 specified including providing necessary expansion joint wherever Cum 2511
required as directed.
Providing tuck/bush in cm 1:1 cement pointing to stone masonry after
racking out old mortar of the masonry joint to a minimum depth
R2-RW-6-02 equivalent to width of the joint, including neat cement rendering, curing Sqm 145
etc. complete as specified and as directed.

Raising or lowering circular manholes to the required level upto 20 cm

including all material, form work etc. with 16 cm thick cement concrete,
R2-RW-6-03 M 15 (1:2:4) coping under frame and cover of manhole, including Each 1151
curing etc. complete as specified and as directed.

Raising or lowering water entrances, hydrant key box/ sluice box/gully

trap chambers to the required level, upto 20 cm including all materials,
R2-RW-6-04 Each 801
curing etc. complete as specified and as directed.

Raising or lowering rectangular manholes to the required level upto 30

cm including all materials, form work, brick work and with 16 cm thick M
R2-RW-6-05 15 cc coping under frame & cover of manhole including curing etc. Each 2297
complete as specified and as directed.

Removing the old C.I. curicular frame & cover and delivering the same
R2-RW-6-06 Each 147
to any Municipal depot or worshop, as directed.
VII MISCELLANEOUS ITEMS
Removing & refixing traffic regulatory boards/ busstop boards/ street
R2-RW-7-01 name boards etc. in M 10 cement concrete, complete as directed. Each 881

Removing traffic regulatory boards/ busstop boards with brackets etc.,

R2-RW-7-02 Each 197
to ward chowky complete as directed.
R2-RW-7-03 Removing & refixing wooden/ concrete benches as directed. Each 2557

Page 25
 USoR 2018 Roads Department
Demolishing existing masonry structures (above & below G.L.) &
carting away serviceable materials to ward chowky & stacking the
R2-RW-7-04 Cum 708
same separately, as directed. (Actual volume of the masonry will be
paid.)
Cutting down existing stone/ brick masonry compound walls,
abutments, piers, wing-walls etc. including stacking the rubble,
R2-RW-7-05 Cum 211
khandkies etc. in stack, as directed. (Actual volume of structure will be
paid.)
Demolishing existing C.G.I./ asbestos sheet structures & carting away
serviceable materials, to ward chowky & stacking the same,
R2-RW-7-06 Cum 63
separately, as directed (Actual Volume of the structure will be paid.)

Removing existing barbed wire fencing/ pipe railing of any height,

R2-RW-7-07 including posts & carting away the same to ward chowky & stacking Rmt 19
the same neatly as directed.
Breaking & removing existing cement concrete slab over culvert coping
R2-RW-7-08 Cum 1315
etc., by any means etc. complete as directed.
Milling upto 60 mm depth asphaltic surface by using milling machine
including transportation anywhere as directed.
R2-RW-7-09 Sqm 77
NOTE: For further passes of 60 mm or part thereof, same rate will be
applicable.
Milling upto 75 mm depth asphaltic surface by using milling machine
including transportation anywhere as directed. (This item should be
R2-RW-7-10 Sqm 82
operated only when milling in a single pass is required to be done for
more than 60 mm depth.)
Spreading the milled material available on site,11 cm thick, compacting
R2-RW-7-11 the same by a roller not less than 10 tonnes with required grade, level Sqm 25
& camber.
Spreading & rolling the milled material available on site, in footpath with
R2-RW-7-12 a 3 tonnes roller, anywhere, levelling the same to proper thickness, Sqm 20
upto 50 mm with directed grade & camber.
Supply of excavator-cum-loader machine on hire chargers, inclusive of
R2-RW-7-13 Shift 8645
diesel, lube oil, cleaner, driver etc.
Supply of dumper on hire charges inclusive of diesel, lube oil, cleaner,
R2-RW-7-14 Shift 3325
driver etc. without labourers.
Supply of Road Roller 8 to 10 M.T. capacity inclusive of diesel, lube oil,
R2-RW-7-15 Shift 8512
cleaner, driver etc.
Supply of Road Roller 3 M.T. capacity inclusive of diesel, lube oil,
R2-RW-7-16 Shift 4722
cleaner, driver etc.
Providing and applying Yellow & Black road marking paint Grade– I in 3
- coats, including single coat of approved brand primer after cleaning of
R2-RW-7-17 old surface of kerb stone with brushing by wire brush as per relevant I. Rmt 50
S. codes to the satisfaction of Engineer in charge etc. complete.

Providing and applying Yellow & Black road marking paint Grade– I in 3-
coats including single coat of approved brand primer after cleaning of
R2-RW-7-18 old surface of any type dividers with brushing by wire brush as per Sqm 166
relevant I. S. codes to satisfaction of Engineer in charge etc. complete.

Transplantation of existing trees of girth of all dia. including uprooting

and shifting of the tree and placing inpits of suitable size and after
transplanting, removal of excavated earth to desired location, filling the
pit with red earth, manure, watering etc. complete with all leads, lifts,
R2-RW-7-19 Per No. 5526
including maintenance for 3 years. The item also includes back filling of
the trench taken for exposing the root system of the tree proposed to
be transplanted etc. complete as directed by Engineer-in-charge.

Page 26
 USoR 2018 Roads Department
Cutting down of trees having diameter above 50 mm upto 150mm.
R2-RW-7-20 Each 446
Cutting down of trees having diameter above150 mm upto 300mm.
R2-RW-7-21 Each 3146
Cutting down of trees having diameter above 300 mm upto 450mm.
R2-RW-7-22 Each 5997
Cutting down of trees having diameter above 450mm upto 600mm.
R2-RW-7-23 Each 8355
Cutting down of trees having diameter above 600 mm upto 900mm.
R2-RW-7-24 Each 11892
Cutting down of trees having diameter above 900 mm upto 1200mm.
R2-RW-7-25 Each 15532
Deposit with concerned authorities for cutting and transplanting of trees
R2-RW-7-26 as per Government norms etc. compelete as directed by Engineer in Per No. 5526
charge.
Supplying, stacking & planting of approved trees of at least 1.0 m,
height above GL in excavated pit of size 1.2 m x 1.2m x 1.2m, at the
site shown by the Engineer, backfiling the pit by putting the manure &
R2-RW-7-27 Per No. 2014
soil and watering & maintaining for 3 years, including disposing the
excavated earth etc. complete as directed by Engineer-in-charge.

Excavation and dismantling of structures on roadway, dismantling the

existing Bus shelters, including sorting out the dismantled material,
R2-RW-7-28 disposal of unserviceable material with all lifts and leads etc. complete Per No. 6260
as directed by Engineer-in- charge.

Excavation and dismantling of structures on roadway, shifting and

relocating of essential utilities, street poles, signals, road sign boards,
including taking necessary permission from the service providers/
R2-RW-7-29 authorities including payment of necessary deposits and supervision Per No. 1229
charges, shifting charges etc. complete as directed by Engineer-in-
charge.
a) Street Poles
Excavation and dismantling of structures on roadway, shifting and
relocating of essential utilities, street poles, signals, road sign boards,
including taking necessary permission from the service providers/
R2-RW-7-30 authorities including payment of necessary deposits and supervision Per No. 1229
charges, shifting charges etc. complete as directed by Engineer-in-
charge.
b) Traffic Signals
Excavation and dismantling of structures on roadway, shifting and
relocating of essential utilities, street poles, signals, road sign boards,
including taking necessary permission from the service providers/
R2-RW-7-31 authorities including payment of necessary deposits and supervision Per No. 327
charges, shifting charges etc. complete as directed by Engineer-in-
charge.
c) Road Sign Boards
Providing and placing in position, levelling, fixing M 25 Grade R.C.C.
pre-cast frame of size 1150 x 1150 x 150 mm and cover (2 Nos) of
R2-RW-7-32 size 1000mm x 500mm x 75mm in line, level over storm water drain as SET 2896
per design procured from approved manufacturer etc. complete

Providing placing in position, levelling, fixing M 25 Grade R.C.C. pre-

cast frame of size 1150 mm x 900 mm x 150 mm and cover (1 Nos) of
R2-RW-7-33 size 1000 mm x 750 mm x 75 mm in line, level over storm water drain SET 2235
as per design procured from approved manufacturer etc. complete.

Page 27
 USoR 2018 Roads Department
Supply of M 25 cc steel fiber reinforced precast cover of size 1000 mm
R2-RW-7-34 x 500 mm x 75 mm as per design, procured from approved SET 755
manufaturers etc. complete.
Supply of M 25 cc steel fiber reinforced precast cover of size 1000 mm
R2-RW-7-35 x 750 mm x 75 mm as per design, procured from approved SET 1013
manufaturers etc. complete.
Barricading the trenches on traffic flow side with 1.60 m height M.S.
Angle post of 50 mm x 50 mm x 5 mm buried in half the depth in drum
of 20 ltrs. capacit by 1:3:6 concrete spaced at 2.25 m centre to centre
R2-RW-7-36 with 22 guage G.I. corrugated sheet of size 2.40 m x 0.75 m bolted to Rmt 169
the M.S. Angle post and painted in yellow and black band with
synthetic enamel paint as per traffic norms and as directed by the
Engineer in charge.
To carry out total station survey of the road with reference to existing
co-ordinate system by establishing control stations by establishing
temporary bench mark from permanent bench mark, marking centre
line of the road by nails, carrying out detailed levelling, plotting cross
upto 500
R2-RW-7-37 sections longitudinally at 20 m intervals with levels at every 4 m cross 20182.5
mtr
distance, preparing drawings on Auto cad to the scale of 1:500 and
supplying 2 hard copies and 1 soft copy in C.D. form etc complete.
Upto 18.30 m wide road.

To carry out total station survey of the road with reference to existing
co-ordinate system by establishing control stations by establishing
temporary bench mark from permanent bench mark, marking centre
line of the road by nails, carrying out detailed levelling, plotting cross
sections longitudinally at 20 m intervals with levels at every 4 m cross
R2-RW-7-38 /100 Rmt 3900
distance, preparing drawings on Auto cad to the scale of 1:500 and
supplying 2 hard copies and 1 soft copy in C.D. form etc. complete
upto 18.3 m wide road. Extra over and above for every 100 m and part
thereof.

To carry out total station survey of the road with reference to existing
co-ordinate system by establishing control stations by establishing
temporary bench mark from permanent bench mark, marking centre
line of the road by nails, carrying out detailed levelling, plotting cross
upto 500
R2-RW-7-39 sections longitudinally at 10 m intervals with levels at every 2 m cross 21190
mtr
distance, preparing drawings on Auto cad to the scale of 1:500 and
supplying 2 hard copies and 1 soft copy in C.D. form etc. complete
from 18.30 to 27.45 m wide road.

To carry out total station survey of the road with reference to existing
co-ordinate system by establishing control stations by establishing
temporary bench mark from permanent bench mark, marking centre
line of the road by nails, carrying out detailed levelling, plotting cross
sections longitudinally at 10 m intervals with levels at every 2 m cross
R2-RW-7-40 /100 Rmt 4238
distance, preparing drawings on Auto cad to the scale of 1:500 and
supplying 2 hard copies and 1 soft copy in C.D. form etc. complete
from 18.30 to 27.45 m wide road - Extra over and above for every 100
m and part thereof.

Page 28
 USoR 2018 Roads Department
To carry out total station survey of the road with reference to existing
co-ordinate system by establishing control stations by establishing
temporary bench mark from permanent bench mark, marking centre
line of the road by nails, carrying out detailed levelling, plotting cross
upto 500
R2-RW-7-41 sections longitudinally at 10 mtr. intervals with levels at every 2 mtr. 22074
mtr
cross distance, preparing drawings on Auto cad to the scale of 1:500
and supplying 2 hard copies and 1 soft copy in C.D. form.. etc.
complete from27.45 mtr. to 36.60 mtrwide road.

To carry out total station survey of the road with reference to existing
co-ordinate system by establishing control stations by establishing
temporary bench mark from permanent bench mark, marking centre
line of the road by nails, carrying out detailed levelling, plotting cross
sections longitudinally at 10 mtr. intervals with levels at every 2 mtr.
R2-RW-7-42 /100 Rmt 4420
cross distance, preparing drawings on Auto cad to the scale of 1:500
and supplying 2 hard copies and 1 soft copy in C.D. form.. etc.
complete from27.45 mtr. to 36.60 mtrwide road.Extra over and above
for every 100 mtrs. And part thereof.

To carry out total station survey of the road with reference to existing
co-ordinate system by establishing control stations by establishing
temporary bench mark from permanent bench mark, marking centre
line of the road by nails, carrying out detailed levelling, plotting cross
upto 500
R2-RW-7-43 sections longitudinally at 10 m intervals with levels at every 2 m cross 25220
mtr
distance, preparing drawings on Auto cad to the scale of 1:500 and
supplying 2 hard copies and 1 soft copy in C.D. form etc. complete for
roads wider than 36.6 m.

To carry out total station survey of the road with reference to existing
co-ordinate system by establishing control stations by establishing
temporary bench mark from permanent bench mark, marking centre
line of the road by nails, carrying out detailed levelling, plotting cross
sections longitudinally at 10 m intervals with levels at every 2 m cross
R2-RW-7-44 / 100 Rmt 5044
distance, preparing drawings on Auto cad to the scale of 1:500 and
supplying 2 hard copies and 1 soft copy in C.D. form etc. complete for
roads wider than 36.6 m, Extra over and above for every 100 m and
part thereof.

Providing and fiixing the barricading in double row with G.I. sheets of
22 guage manufactured by TATA Co. and JINDAL Co. fixed on 3 inch
dia. (75mm.) wooden bullies which will be burried in existing road
R2-RW-7-45 sufficeintly. Embossing of TATA/JINDAL Brand on G.I. Sheet shall be Rmt 570
ensured before painting with yellow and black bands of synthetic
enamel paint as per the traffic norms and as directed by the Engineer.

Page 29
 USoR 2018 Roads Department
Supplying and fixing 600 mm x 900 mm clear opening composite resin
manhole cover of single cover design, of approved brand with 12.5 ton
load capacity, as per EN-124 standard. Covers & frame shall have SS
nut bolt locking arrangement and top abrasion resistant layer of
decorative granite finish. Abrasion resistance shall be conforming to IS-
15658:2006 and permissible permanent set value of 6 mm after the
application of 2/3 test load in five continuous applications as per EN-
124. The testing shall be performed in fully equipped and NABL
R2-RW-7-46 No. 17543
certified test lab with random batch test (2% of lot size) as per testing
procedure stated in EN-124 standard, including testing ,inspection of
material sample and finished product in presence of Engineers (2nos.)
at Manufacturer's work , etc. complete as specified and as directed by
Engineer-in-Charge. (Inspection shall be as per guidelines of IS and
EN-124 standard specifications.)

Supplying and fixing 900 mm x 900 mm clear opening composite resin

manhole cover with two cover design, of approved brand with 12.5 ton
load capacity, as per EN-124 standard. Covers & frame shall have SS
Nut bolt locking arrangement and top abrasion resistant layer of
decorative granite finish. Abrasion resistance shall be conforming to IS-
15658:2006 and permissible permanent set value of 6 mm for EA
cover, after application of 2/3 test load in five continuous applications
as per EN-124. The testing shall be performed in fully equipped and
R2-RW-7-47 No. 23216
NABL certified test lab with random batch test (2% of lot size) as per
testing procedure stated in EN-124 standard, including testing,
inspection of material sample and finished product in presence of
Engineers (2nos.) at Manufacturer's works, etc. complete as specified
and as directed by Engineer-in-Charge. (Inspection shall be as per
guidelines of EN-124-2015 standard specifications.)

Supplying 600 mm x 900 mm clear opening composite resin manhole

cover with two cover design, of approved brand with 12.5 ton load
capacity, as per EN-124 standard. Covers & frame shall have SS Nut
bolt locking arrangement and top abrasion resistant layer of decorative
granite finish. Abrasion resistance shall be conforming to IS-
15658:2006 and permissible permanent set value of 6 mm for each
cover, after application of 2/3 test load in five continuous applications
as per EN-124. The testing shall be performed in fully equipped and
R2-RW-7-48 No. 17337
NABL certified test lab with random batch test (2% of lot size) as per
testing procedure stated in EN-124 standard, including testing,
inspection of material sample and finished product in presence of
Engineers (2nos.) at Manufacturer's works, etc. complete as specified
and as directed by Engineer-in-Charge. (Inspection shall be as per
guidelines of EN-124-2015 standard specifications.)

Page 30
 USoR 2018 Roads Department
Supplying 900 mm x 900 mm clear opening composite resin manhole
cover with two cover design, of approved brand with 12.5 ton load
capacity, as per EN-124 standard. Covers & frame shall have SS Nut
bolt locking arrangement and top abrasion resistant layer of decorative
granite finish. Abrasion resistance shall be conforming to IS-
15658:2006 and permissible permanent set value of 6 mm for each
cover, after application of 2/3 test load in five continuous applications
as per EN-124. The testing shall be performed in fully equipped and
R2-RW-7-49 No. 22943
NABL certified test lab with random batch test (2% of lot size) as per
testing procedure stated in EN-124 standard, including testing,
inspection of material sample and finished product in presence of
Engineers (2nos.) at Manufacturer's works, etc. complete as specified
and as directed by Engineer-in-Charge. (Inspection shall be as per
guidelines of EN-124-2015 standard specifications.)

P/f polyethylene plastic water/sand fillable metro-barricades having

approx. size1840 mm X 440mm X 1900mm, (LxWxD), 32-35 Kgs
empty wt. and tank capacity 100-120 lits., manufactured by M/s. B.D.
Industries or equivalent ISO certified company having minimum
R2-RW-7-50 Rmt 547
experience of 3 years in manufacturing and supplying to the
Govt./Semi Govt./Other reputed organisations alongwith necessary
fixing arrangement as specified and as directed by the Engineer-In-
charge.
P/f Polyethylene plastic water/sand fillable barricades having approx.
size 2000 mm X 560 mm X 1000 mm, (LxWxD), 20-23 Kgs empty wt.
and tank capacity 80-100 lits., manufactured by M/s. B.D. Industries or
equivalent ISO Certified Company having minimum experience of 3
R2-RW-7-51 Rmt 366
years in manufacturing and supplying to the Govt./Semi Govt./ Other
reputed organisations alongwith necessary fixing and interlocking
arrangement as specified and as directed by the Engineer Incharge.

P/f polyethylene plastic water/sand fillable metro-barricades having

approx. size1840 mm X 440 mm X 1900 mm, (LxWxD), 32-35 Kgs
empty wt.and tank capacity 100-120 lits., manufactured by M/s. B.D.
Industries or equivalent ISO certified company having minimum
Rmt per
R2-RW-7-52 experience of 3 years in manufacturing and supplying to the 70
10 days
Govt./Semi Govt./Other reputed organisations alongwith necessary
fixing arrangement as specified and as directed by the Engineer
Incharge. (Temporary Barricades)

P/f polyethylene plastic water/ sand fillable barricades having approx.

size 2000 mm X 560 mm X 1000 mm, (LxWxD), 20-23 Kgs empty
wt.and tank capacity 80-100 lits., manufactured by M/s. B.D. Industries
or equivalent ISO certified company having minimum experience of 3 Rmt per
R2-RW-7-53 56
years in manufacturing and supplying to the Govt./Semi Govt./Other 10 days
reputed organisations alongwith necessary fixing and interlocking
arrangement as specified and as directed by the Engineer Incharge.
(Temporary Barricades)

Page 31
 USoR 2018 Roads Department
Providing and fabricating the structural steel barricade made out of
1.25 mm thk MS plates of size 2.5 m x 2 m, M. S. Angles ISA 40 mm x
40 mm x 5 mm., MS flat 40 mm x 5 mm thk and ISLB 250 mm x 125
mm as per IS 1161- IRHS/ SHS rolled angle plates etc. (material as
per IS 4923 Grade YST 241) of TATA Steel, Lloyd Steel, SAIL, Essar
Steel approved in straight profile of all sizes,shapes and for all works
R2-RW-7-54 including stiffeners, bolt sand nuts, fillet/ buttwelding, splicing, machine MT 1618
grinding of all member joints wherever required to give neat
appearance, fabricating to a curved or bent profile like arch or semi
circular shape, fixing at site as directed etc. complete. Rate is including
the entire logistics of transporting and other related activities for
completing this item.

VIII DUCTS AND PIPES

P/L 150mm dia. R.C.C. hume pipes, NP2 class, jointing, filling in 1:1
C.M., including plugging of both the ends with gunny bags, brick
R2-RW-8-01 Rmt 454
masonary in C.M. 1:4 with plaster in C.M. 1:4 & curing etc. complete,
as specified as directed.
P/L 250mm dia. R.C.C. hume pipes, NP2 class, jointing, filling in 1:1
C.M., including plugging of both the ends with gunny bags, brick
R2-RW-8-02 Rmt 640
masonary in C.M. 1:4 with plaster in C.M. 1:4 & curing etc. complete,
as specified as directed.
P/L 300mm dia. R.C.C. hume pipes, NP2 class, jointing, filling in 1:1
C.M., including plugging of both the ends with gunny bags, brick
R2-RW-8-03 Rmt 796
masonary in C.M. 1:4 with plaster in C.M. 1:4 & curing etc. complete,
as specified as directed.
Providing & fixing in position M-20 cement concrete precast slab, 50cm
x 50cm.& 8cm. Thick with the word "DUCT" inscribed over it including
R2-RW-8-04 No. 326
making good, the damaged surrounding surface etc. complete.

X CEMENT CONCRETE ROAD ITEMS

Providing & laying M-40 cement concrete having avg. compressive
strength 45Mpa, flextural strength 4.8 MPa includingForm work, mixing
in non-tilting mechanical mixer (with Weigh Batcher), compacting by
internal & surface vibrator, finishing curing & tarring the sides of slabs
with hot bitumen/black Japan Paint as specified and as
R2-RW-10-01 Cum 5956
directed(cement mortar vata will be paid separtely). Contractors have
to make their own arrangement for potable water for
construction/curing, etc. & will be not paid separately.

Providing & laying M-15 cement concrete avg. compressive strength

18.5Mpa for foundation/ encasement/ pavement/ saddleincludingForm
work,mixing in non-tilting mechanical mixer (with Weigh
Batcher),placing, compacting by internal & surface vibrator,finishing
R2-RW-10-02 curing etc. complete asspecified and as directed(cement mortar vata Cum 5087
will be paid separtely). Contractors have to make their own
arrangement for potable water for construction/curing,with hessain
cloth, etc. & will be not paid separately for it.

Page 32
 USoR 2018 Roads Department
Providing & laying M-10 cement concrete avg. compressive strength
13.5Mpa for foundation/encasement/pavements with or without
chequered design including Form work,mixing in non-tilting mechanical
mixer (with Weigh Batcher), placing,vibrating with plate, needle
vibrator, finishing curing etc. complete as specified and as directed
R2-RW-10-03 Cum 4802
(cement mortar vata will be paid separtely). Contractors have to make
their own arrangement for potable water for construction/curing,with
hessain cloth, etc. & will be not paid separately for it.

Providing & laying cement concrete 1:5:10( M8 ,ordinary concrete) for

foundation/encasement etc.(using metal No. I,II,III, in proportion as
directed) with or without chequered design includingForm work
wherever necessary, mixing in non-tilting mechanical mixer (with
Weigh Batcher),placing,compacting by needle, plate vibrator &
R2-RW-10-04 Cum 4008
finishing curing as specified and as directed. Contractors have to make
their own arrangement for potable water for construction/curing,with
hessain cloth, etc. & will be not paid separately for it.(Minimum cement
content 150 kg/m³)

Providing & laying R.C.C. running beam in M-40 cement concrete

including required formwork mixing, compacting & curing, etc.
complete reinforced with 12mm dia.(Minimum 4 Nos.)M.S. main bars &
6mm Dia M.S. rings at 15cm c/c to be anchored in slipper slab properly
with M.S. reinforcement as per drawing etc. complete as
R2-RW-10-05 Rmt 805
specified(Steel will not be paid separately).Contractor has to make his
own arrangement for potable water for construction/curing with hessian
cloth, etc. & will not be paid separately.
Beam Size: a) 23cm x 27.50cm.

Providing & laying R.C.C. running beam in M-40 cement concrete

including required formwork mixing, compacting & curing, etc.
complete reinforced with 12mm dia.(Minimum 4 Nos.)M.S. main bars &
6mm Dia M.S. rings at 15cm c/c to be anchored in slipper slab properly
with M.S. reinforcement as per drawing etc. complete as specified
R2-RW-10-06 (Steel will not be paid separately).Contractor has to make his own Rmt 844
arrangement for portable waterfor construction/curing with hessian
cloth, etc. & will not be paid separately.
Beam Size:b) 23cm. x 30cm.

Cutting of construction & dummy joints of M-35 C.C.& above slab by

mechanical means within 10 to16 hrs.of casting of bay/slab as
R2-RW-10-11 directed.A) transverse dummy joints 100mm deep or 1/3 thickness of Rmt 59
concrete pavement &6 mm wide.
Cutting of construction & dummy joints of M-35 C.C.& above slab by
mechanical means within 10 to 16 hrs.of casting of bay/slab as
R2-RW-10-12 Rmt 59
directed.B) Longitudinal construction joints 100mm deep or 1/3rd
thickness of slab & 6 mm wide
Providing & fixing in position premoulded asphalt filler 12mm thick
confirming to I.S. 1838 of 1983 for placing of the expansion
R2-RW-10-13 joint,around manholes & waterentrances, etc put to the required depth Sqm 352
& 25mm below the camber,etc. complete as directed.

Providing & placing 5mm thick thermocole in dummy & construction

joints immediately after cutting of joints & removing the same before
R2-RW-10-14 Sqm 76
dressing of dummy & construction joints etc. complete , as dirceted.

Page 33
 USoR 2018 Roads Department
Providing & fixing high density polythene pipe of approved quality to fit
around the dowel bars of 32mm dia at the end of expansion joints,fully
greased inside, cotton waste the pipe around the dowel bars & the pipe
R2-RW-10-15 Each 31
duly capped at the end as directed.(H.D.P. pipe shall be 30cm in
length) As shown in the drawing.

Providing & fixing in position mild steel in tie bars of 12mm dia 55cm
long & 45cm C/C whenever directed including handling , wrapping with
R2-RW-10-16 MT 63226
paper for half length,fixing straightening, wastage etc. complete in all
respect as direced.
Providing & fixing in position M.S. dowel bars of 32mm dia 55cm long &
30cm C/C whenever directed including handling, fixing, etc.
R2-RW-10-17 MT 62904
complete(no extra payment will be made for applying bitumen & grease
to dowel bars).
Providing & laying waterproof paper of 40 GSM including overlap ( to
R2-RW-10-18 be not less than 10cm)etc. complete as specified as directed. Sqm 11

Providing & constructingcement vatas in c/m 1:10 at 0.6m * 0.6mc/c

admeasuring 0.09m at bottom, 0.04m at top & 0.075m deep &
R2-RW-10-19 Sqm 78
maintaining the same throughout 14 days curing & removing the same
thereafter as directed.
Resealing of joints of M-35 & above C.C. old pavement with hot
applied sealing compounds confirming to IS-1834-1984 including
cutting & removing existing damaged sealing compound by racking
tool or mechanical means & clearing of joints with compressed air,
R2-RW-10-20 application of primer for receiving hot sealingcompound & providing Rmt 66
layer of lime powder over hot sealing compound etc. complete
asdirected.
A)Resealing 6mm-10mm wide transverse /longitudinal joints with
Avg.depth of 40mm.
Resealing of joints of M-35 & above C.C. old pavement with hot
applied sealing compounds confirming to IS-1834-1984 including
cutting & removing existing damaged sealing compound by racking
tool or mechanical means & clearing of joints with compressed air,
R2-RW-10-21 application of primer for receiving hot sealingcompound & providing Rmt 83
layer of lime powder over hot sealing compound etc. complete
asdirected.
B) Resealing 11-15mm wide transverse /longitudinal joints with
average depth of 40mm
Resealing of joints of M-35& above C.C. old pavement with hot applied
sealing compounds confirming to IS-1834-1984 including cutting &
removing existing damaged sealing compound by racking tool or
mechanical means & clearing of joints with compressed air, application
R2-RW-10-22 Rmt 74
of primer for receiving hot sealingcompound & providing layer of lime
powder over hot sealing compound etc. complete asdirected.C)
Resealing of 12-25mm wide expansion joints with Avg. depth of 25mm.

Dressing of M-35 & above new C.C.pavement,dummy,transverse,

longitudinal & expansion joints with hot rubberised sealing compound
confirming to IS 1834-1984 after proper cleaning with compressed
air,applying required primer & providinga layer of lime powder over hot
R2-RW-10-23 Rmt 92
sealing compound etc. complete as directed.A) Sealing 6mm wide
dummy/transverse joints with a depth of 100mm/1/3rd thickness of
concrete pavement.

Page 34
 USoR 2018 Roads Department
Dressing of M-35 & above new C.C.pavement,dummy,transverse,
longitudinal & expansion joints with hot rubberised sealing compound
confirming to IS 1834-1984 after proper cleaning with compressed
air,applying required primer & providinga layer of lime powder over hot
R2-RW-10-24 Rmt 92
sealing compound etc. complete as directed.B) Sealing of 6mm wide
longitudinal joint with depth of 100mm or 1/3rd thickness of concrete
pavement.

Dressing of M-35 & above new C.C.pavement,dummy,transverse,

longitudinal & expansion joints with hot rubberised sealing compound
confirming to IS 1834-1984 after proper cleaning with compressed
R2-RW-10-25 air,applying required primer & providinga layer of lime powder over hot Rmt 60
sealing compound etc. complete as directed.C) Sealing of 25mm wide
expansion joints with avg. depth of 12mm.

P/L ready mix cement concrete M-15cc having avg compressive

strength 18.5 Mpa for foundation/ encasement/ pavement/ cradle
including formwork,mixing in batching plant, compacting by internal &
surface vibrator,curing,finishing etc. complete as specified & as
R2-RW-10-26 Cum 6893
directed by the Engineer. Contractor has to make his own arrangement
for water for curing etc.& will not be paid separately for it.(MINIMUM
CEMENT CONTENT 240 Kg/m³.)

P/L R.M.C. M-10 C.C. having avg. compressive strength 13.5 Mpa in
foundation/encasement/pavement with or without chequered design
including formwork, mixing in batching plant, placing vibrating with plate
or needle vibrator, curing etc. complete as directed by the Engineer.
R2-RW-10-27 Cum 6452
C/s. has to make his own arrangement for water for curing with
Hessian cloth etc. & will not be paid separately.(MINIMUM CEMENT
CONTENT 220 Kg/m³.)

Supply & filling sand, metal GRAVELLY SAND Corresponded to

CLASSII/ CLASS III GRADING of TABLE 100.1of MCGM road
R2-RW-10-28 Cum 1905
specificationsfor Roadworks in trenches upto required depth &
watering, ramming etc. complete as directed
P/L R.M.C.M-20 C.C.having avg. compressive strength 24 Mpa
procured from M.C.G.M. approved R.M.C. plant including use of
approved makes plasticizer/retarder & transported by transit mixer &
R2-RW-10-29 placing at worksite, compacting, finishing curing etc. by contractor's Cum 7055
water & tarring the sides of from work with hot bitumen as specified &
directed by the Engineer.(MINIMUM CEMENT CONTENT 260 Kg/m³.)

Providing & fixing pre-cast Beam in M 40 CC of size 23 cm x 23 cm x

35 cmin length set in 15 cm M15 C.C. filling of joints in 1:2, including
R2-RW-10-30 No. 445
escavation, form work, mixing compacting , curing etc. complete as
specified and as directed.

Page 35
 USoR 2018 Roads Department
Providing and laying Dry Lean Concrete base including providing
coarse and fine aggregate to the specified gradation using minimum
cement content150 kg/cum of concrete with OPC 43 grade cement,
mixing of concerete as per approved design mix using mechanised
batch mix plant of appropriate capacity, transporting and laying and
compacting with vibratory roller of mimumum 80- 100 KN static weight
to give desired compacted density and average compressive strength
R2-RW-10-31 Cum 4562
of 10 MPa at 7 days and curing with liquid curing compound and
sprinkling water and covering with moist hesian cloth or ponding of
water for 7 days including providing construction joints, including all
material, labour, machinery with all leads and lifts etc. complete as
specified and as dirercted bythe Engineer. A)Laying by manually.

Providing and laying Dry Lean Concrete base including providing

coarse and fine aggregate to the specified gradation using minimum
cement content 150 kg/cum of concrete with OPC 43 grade
cement,mixing of concerete as per approved design mix using
mechanised batch mix plant of appropriate capacity, transporting and
laying with self propelled paver with electronic sensor device and
compacting with vibratory roller of mimumum 80- 100 KN static weight
R2-RW-10-32 to give desired compacted density and average compressive strength Cum 4481
of 10 MPa at 7 days and curing with liquid curing compound and
sprinkling water and covering with moist hesian cloth or ponding of
water for 7 days including providing construction joints, including all
material, labour, machinery with all leads and lifts etc. complete as
specified and as dirercted bythe Engineer. B) Laying by paver with
electronic sensor device

Providing & laying M-40 C.C.avg. compressive strength 45 MPa and

avg.flextural strength of 5.0 MPa (As per IRC 15-2002.N.1.6) procured
from M.C.G.M.approved R.M.C. plant including use of approved make
plasticizer / retarder & Contractors water with ice flakes and
transported by transit mixer and placing at work site. Compacting
R2-RW-10-33 Cum 7968
finishing, initial curing byapproved curing compound & Contractors
waterand tarring thesides of slab with hot bitumen as specified
anddirected (w/c ratio o.4 maximum)(vata for curring will be paid
separately.)(MINIMUM CEMENT CONTENT 350 kg/m³)

P/L R.M.C.M-25C.C.having avg. compressive strength 29 Mpa

procured from M.C.G.M. approved R.M.C. plant including use of
approved makes plasticizer/retarder & transported by transit mixer &
R2-RW-10-34 placing at worksite, compacting, finishing curing etc. by contractor's Cum 7291
water & tarring the sides of from work with hot bitumen as specified &
directed by the Engineer.(MINIMUM CEMENT CONTENT 300 kg/m³)

Page 36
 USoR 2018 Roads Department
Providing and laying Dry Lean Concrete base including providing
coarse and fine aggregate (with no fines i.e. 2.36 mm passing 0%
to5%) to the specified gradation using minimum cement content 150
kg/ cum of concrete with OPC 43 grade cement mixing of concerete as
per approved design mix using mechanised batch mix plant of
appropriate capacity, transporting and laying and compacting with
vibratory roller of mimumum 80- 100 KN static weight to give desired
compacted density and average compressive strength of 10 MPa at 7
R2-RW-10-35 days and curing with liquid curing compound and sprinkling water and Cum 4836
covering with moist hesian cloth or ponding of water for 7 days
including providing construction joints, including all material, labour,
machinery with all leads and lifts etc. complete as specified and as
dirercted bythe Engineer.NOTE: This ITEM Should be OPERATED
after obtaining prior SPECIFIC TECHNICAL SANCTION ofDir.( E.S.&
P.) . A)Laying by manually .

Providing and laying Dry Lean Concrete base including providing

coarse and fine aggregate (with no fines i.e. 2.36 mm passing 0%
to5%) to the specified gradation using minimum cement content 150
kg/ cum of concrete with OPC 43 grade cement mixing of concerete as
per approved design mix using mechanised batch mix plant of
appropriate capacity, transporting and laying with self propelled paver
with electronic sensor device and compacting with vibratory roller of
mimumum 80- 100 KN static weight to give desired compacted density
and average compressive strength of 10 MPa at 7 days and curing
R2-RW-10-36 Cum 4755
with liquid curing compound and sprinkling water and covering with
moist hesian cloth or ponding of water for 7 days including providing
construction joints, including all material, labour, machinery with all
leads and lifts etc. complete as specified and as dirercted bythe
Engineer.NOTE:ThisITEM Should be OPERATEDafter obtainingprior
SPECIFIC TECHNICAL SANCTION of DIr. ( E.S.& P.).B)Laying by
paver with electronic sensor device.

Providing and fixing of the precast TREE GUARD KERB of M-20 C.C.
of height 230mm., width 100mm., Length 400mm.,finished neatly,
compacting ,curing, formwork etc. including bedding of M-10
C.C.procured from M.C.G.M.approved R.M.C. plant,10cm.thick, filling
R2-RW-10-37 of jointing in C.M. 1:2 and painting the exposed surface with 3 coats of Rmt 471.067
road marking paint, Grade I of approved colours and quality including
single coat of approved brand primer including excavation in C.C.
,asphalt etc. as specified and as directed.

Proving & placing sand drain blanket layer etc. complete,grading of

sand to be used for sand blanket layers as filter material to act as a
sand drain having grading requirement as per cl. No. 120 ,table no.:
R2-RW-10-38 Cum 2438
100.1,class-I in MCGM road specification for Roadworks & refer cl. no.
133 for material requirement

Page 37
 USoR 2018 Roads Department
Extra & over for providing and using special admixtures/ plasticizers to
achieve required crushing & Average flexural strength 5.0 Mpa of M40
grade concrete in 7 days. NOTE :THIS ITEM SHOULD BE OPRATED
ONLY AFTER SPECIFIC SANCTION OF DIR(E.S.& P.).NOTE:FOR
SPECIAL ADMIXUERES ITEMSSUCH AS ELKEM MICROSILICA,
R2-RW-10-39 Cum 1067
POLYPROPELYNE FIBER, BSF GLANIUM SKY,EARLY STRENGTH
SUPER PLASTYSIZER, STEEL FIBER REINFORCEMENT ETC.
ORIGINAL CHALAN SHOULD BE PRODUCED , FAILING WHICH NO
PAYMENT TO BE MADE.

Extra over above for mixingpolypropylene fibers 300 e3 Multi-

Dimensional Graded Fibrillated 100% Vergin as per ASTM C 1116 III
Type 4.1.3 Std. at the rate of 125 gms.per bagof 50Kgs.of cement
etc.NOTE :THIS ITEM SHOULD BE OPRATED ONLY AFTER
SPECIFIC SANCTION OF DIR(E.S.& P.) NOTE:FOR SPECIAL
R2-RW-10-40 ADMIXUERES ITEMSSUCH AS ELKEM MICROSILICA, Cum 439
POLYPROPELYNE FIBER, BSF GLANIUM SKY,EARLY STRENGTH
SUPER PLASTYSIZER, STEEL FIBER REINFORCEMENT ETC.
ORIGINAL CHALAN SHOULD BE PRODUCED , FAILING WHICH NO
PAYMENT TO BE MADE.

Providing & Fixingof the Ferrocrete precast slab (concrete grade M-25
with medium duty slab) of size 1050mm.*500mm.*50mm.Red,& Grey
colour finishto be used as footpath over SWD in c.m.1:4 12mm thk to
R2-RW-10-41 /slab 2031
the required level including carring out necessary load tests @
Municipal testing laboratory @ 2 nos. per 100 nos. of slabs to be fixed.

Construction of cement concrete kerb with top and bottom width 115
and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10
grade foundation 150 mm thick, foundation having 50 mm projection
R2-RW-10-42 beyond kerb stone, kerb stone laid with kerb laying machine,
foundation concrete laid manually, all complete as per clause 408 of
MORTH 5th edition, revised on 2013

R2-RW-10-42-a Using Concrete Mixer Rmt 293

R2-RW-10-42-b Using Concrete Batching and Mixing Plant Rmt 335
Cast in Situ Cement Concrete M 20 Kerb with Channel (Construction of
cement concrete kerb with channel with top and bottom width 115 and
165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade
foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in
R2-RW-10-43
PCC M20 grade, sloped towards the kerb, kerb stone with channel laid
with kerb laying machine, foundation concrete laid manually, all
complete as per clause 408)

R2-RW-10-43-a Using Concrete Mixer Rmt 540

R2-RW-10-43-b Using Concrete Batching and Mixing Plant Rmt 584
P/L Controlled Low Strength Material (CLSM)having avg. compressive
strength 5.0Mpa procured from M.C.G.M. approved R.M.C. plant
including use of approved makes plasticizer/retarder & transported by
R2-RW-10-44 transit mixer & placing at worksite, compacting, finishing curing etc.as Cum 4410
specified & directed by the Engineer.(MINIMUM CEMENT CONTENT
200 kg/m³)

Page 38
 USoR 2018 Roads Department
Providing & laying M-60 C.C. and Avg. Flextural Strength of 5.0 MPa in
3daysprocured from M.C.G.M.approved R.M.C. plant including use
ofMicrosilica approved make superplastisizer and transported by transit
mixer and placing at work site. Compacting finishing, initial curing
byapproved curing compound Contractors water and tarring thesides
of slab with hot bitumen as specified anddirected (w/c ratio 0.35
maximum)(vata for curring will be paid separately.)NOTE: THIS ITEM
R2-RW-10-45 SHOULD BE OPRATED ONLY AFTER SPECIFIC SANCTION OF Cum 9828
DIR(E.S.& P.)NOTE:FOR SPECIAL ADMIXUERES ITEMSSUCH AS
ELKEM MICROSILICA, POLYPROPELYNE FIBER, BSF GLANIUM
SKY,EARLY STRENGTH SUPER PLASTYSIZER, STEEL FIBER
REINFORCEMENT ETC. ORIGINAL CHALAN SHOULD BE
PRODUCED , FAILING WHICH NO PAYMENT TO BE MADE.

Providing and fixing pre-cast Central Median divider Type-I of R.M.C.M-

20 C.C. on Road as per drawing, finished neatly, compacting , curing,
form work, etc, including beding R.M.C.M-10 C.C, 15 cm thick, filling of
joints in C.M. 1:2& painting the exposed surface with 3 coat of road
marking paint, Grade-I of approved colour and quality including
R2-RW-10-46 required excavation in C.C., asphalt etc. and removing the same any Rmt 1685
where in City & Sub limit, levelling the same as specified and as
directed by the Engineer.( Note:-Every 10 dividers shall have 40 mm.
dia. hole along the center line of divider at formation level of road to
drain off rain water / excess water.)

Providing and fixing pre-cast Central Median divider Type C TREE

PLANTER(in pair as per drawing) of R.M.C.M-25 C.C. on Road as per
drawing, finished neatly, compacting, curing, form work, etc, including
Reinforcement as per drawing, beding R.M.C.M-10 C.C, 15 cm thick,
filling of joints in C.M. 1:2& painting the exposed surface with 3 coat of
road marking paint, Grade-I of approved colour and quality including
R2-RW-10-47 required excavation in C.C., asphalt etc. and removing the same any Rmt 4231
where in City & Sub limit, levelling the same as specified and as
directed by the Engineer.
(Note:-Every 10 dividers shall have 40 mm. dia. hole along the center
line of divider at formation level of road to drain off rain water / excess
water.)

Providing and fixing pre-cast Central Median divider Type NPD-1 of

R.M.C.M-25 C.C. on Road as per drawing, finished neatly, compacting
, curing, form work, etc, including Reinforcement as per drawing,beding
R.M.C.M-10 C.C, 15 cm thick, filling of joints in C.M. 1:2& painting the
R2-RW-10-48 exposed surface with 3 coat of road marking paint, Grade-I of Rmt 5455
approved colour and quality including required excavation in C.C.,
asphalt etc. and removing the same any where in City & Sub limit,
levelling the same as specified and as directed by the Engineer.

Page 39
 USoR 2018 Roads Department
Providing and fixing pre-cast Central Mediandivider Type- II of R.M.C.M-
20 C.C. on Road as per drawing, finished neatly, compacting , curing,
form work, etc, including beding R.M.C. M-10 C.C, 15 cm thick, filling of
joints in C.M. 1:2& painting the exposed surface with 3 coat of road
marking paint, Grade-I of approved colour and quality including
R2-RW-10-49 required excavation in C.C., asphalt etc. and removing the same any Rmt 1046
where in City & Sub limit, levelling the same as specified and as
directed by the Engineer.( Note:-Every 10 dividers shall have 400 mm.
dia. hole along the center line of divider at formation level of road to
drain off rain water / excess water.)

Providing and fixing of cement concrete Kerb Stone of various grades

of size: 500mm width x 325 height x 165mm thick (Half Batter, Bull
Nose / Full Batter) manufactured in wet press vacuum dewatering
technology plant / equivalant with face pimple finish for high visibility
with excellent quality and finish and edges perfect and sharp. Grade –
M-25. Including excavation in any soil except rock, laying a leveling
R2-RW-10-50 course of M 15 grade RMC 100mm. thick, to required slope (inclusive Rmt 1116
of form work) jointing in C.M.1:2 proportion flush to concrete surface,
painting exposed surface with one coat of primer and two coats of 1st
grade road marking paint in the yellow/white/black or any shade as
directed.(Kerbstones shall be procurred from MCGM registered
agencies).

Providing and fixing ofWater Dished Channel size : 600 x 300 x 80mm,
M-40 grade manufactured in vacuum wet press technology plant with
excellent finish and sharp edges inclusive of excavation in any soil
except rock, laying of leveling course ofM 15 grade RMC 100mm. thick
R2-RW-10-51 Rmt 799
to required slope, (inclusive of form work) jointing in 1:2 cm. prop. flush
to concrete surfaces as directed (Watertables shall be procurred from
MCGM registered agencies).

Providing & fixing pre-cast concrete header for Paver Blocks on road M-
50 grade pimple finish one edge chamfer size 500mm x 325mm x
150mm for joint of Paver and asphalt road manufactured in wet press
vacuum technology plant with excellent finish and sharp edge,
R2-RW-10-52 Rmt 1157
FixinginR.M.C. M15 C.C. 10 cm thk filling of joints in c/m 1:2, including
excavation, form work, mixing compacting , curing etc. complete as
specified and as directed.

Green Cutting of construction & dummy joints of M-40 C.C.& above

(Ultra thin white topping)slabby mechanical means within period
ofconcrete strength @ 80 to 100 kg/ cm²or earlier, casting of bay/slab
R2-RW-10-53 Rmt 51
as directed.Transverse dummy & Longitudinal construction joints1/2
thickness of concrete pavement & 3 to 4mm wide.

Providing and fixing pre-cast Central Median divider Type NPD-1A of

R.M.C.M-25 C.C. on Road as per drawing, finished neatly, compacting
, curing, form work, etc, including Reinforcement as per drawing,beding
RMC M-10 C.C, 15 cm thick, filling of joints in C.M. 1:2 & painting the
R2-RW-10-54 exposed surface with 3 coat of road marking paint, Grade-I of Rmt 3789
approved colour and quality including required excavation in C.C.,
asphalt etc. and removing the same any where in City & Sub limit,
levelling the same as specified and as directed by the Engineer.

Page 40
 USoR 2018 Roads Department
Excavation in Reinforced OR pavement grade concrete M-20 & above
by using modern machinery (poclain with rock breaker, etc.) including
R2-RW-10-55 with stacking of excavated material within 150 m radius etc compalete Cum 1525
upto any depth as specified & as directed, by the Engineer.

Extra over to use sleep form paver to lay Pavement Quality Concrete
as per Morth specifications & as directed by the Engineer. NOTE: THIS
R2-RW-10-56 Cum 391
ITEM SHOULD BE OPRATED ONLY AFTER SPECIFIC SANCTION
OF DIR(E.S.& P.)
Extra over above RW-10-33M-40 C.C. and Avg. Flextural Strength of
5.0 MPa in7daysprocured from M.C.G.M.approved R.M.C. plant
including use ofMicrosilica, ( MCGM Registration manufacturer )
superplastisizer and fiber, transported by transit mixer and placing at
work site. Compacting finishing, initial curing byapproved curing
compound Contractors water and tarring thesides of slab with hot
bitumen as specified anddirected (w/c ratio 0.30maximum)(vatafor
curring & fibre will be paid separately.)
NOTE:
R2-RW-10-57 Cum 3067
1)THIS ITEM SHOULD BE OPRATED ONLY AFTER SPECIFIC
SANCTION OF DIR(E.S.& P.)
2) FOR SPECIAL ADMIXUERES ITEMSSUCH AS ELKEM
MICROSILICA, POLYPROPELYNE FIBER, BSF GLANIUM
SKY,EARLY STRENGTH SUPER PLASTYSIZER, STEEL FIBER
REINFORCEMENT ETC. ORIGINAL CHALAN SHOULD BE
PRODUCED , FAILING WHICH NO PAYMENT TO BE MADE.

Extra over above RW-10-33for mixing Dramix fiber manufactured

byBEKAERT to be used in Steel Fiber Reinforcement Concrete
Pavement shall be produced from high tensile steel cold drawn wires &
confirm to ASTM A820 STANDARD & low carbon confirming to 10016-
2-C9D.The length of fibre shall be 60mm & dia. 0.75mm making a wire
network of 280m/kg. Aspect ratio (Length/Diameter) shall be 80 & Fibre
Tensile Strength (Rm)>1225 n/mm². .
NOTE :1)THIS ITEM SHOULD BE OPRATED ONLY AFTER
R2-RW-10-58 SPECIFIC SANCTION OF DIR(E.S.& P.) and applicable only SFRC Cum 1932
Designed Pavement.
2) FOR SPECIAL ADMIXUERES ITEMSSUCH AS ELKEM
MICROSILICA, POLYPROPELYNE FIBER, BSF GLANIUM
SKY,EARLY STRENGTH SUPER PLASTYSIZER, STEEL FIBER
REINFORCEMENT ETC. ORIGINAL CHALAN SHOULD BE
PRODUCED , FAILING WHICH NO PAYMENT TO BE MADE.

P/L in position hot poured rubberized asphalt (sealing compound) for

contractionjoints spaced at every 4.0 m intervals using Backer
Rod.The Diameter of Backer Rod Should be Approximately 25 percent
R2-RW-10-59 greater than the width of joint to ensure a tight fit. THe dimension Rmt 33
recomended for the sealent width (W), depth (D) and reces (R) are
respectively 10-12 mm, 8-10 mm and 6 mm.

Page 41
 USoR 2018 Roads Department
Providing and fixing of the precast kerb stone of height 325mm., base
width 165mm., top width 115mm.in M20grade RMCsupplied through
MCGM approved plant or concrete mixed with use of weigh batch
mixers as detailed in drawingu/No.Dy.Ch.E./Rds/93/E.S. of17 /8 / 2005,
excavation in any soil except rock, laying a leveling course of M 15
grade RMC 100mm. thick, to required slope (inclusive of form work)
R2-RW-10-60 Rmt 605
jointing in C.M.1:2 proportion flush to concrete surface, painting
exposed surface with one coat of primer and two coats of 1st grade
road marking paint in the yellow/white/black or any shade as
directed.(Kerbstones shall be procurred from MCGM registered
agencies).

Providing and fixing of the precast tapered water table of thickness

varying from 105 to 125 mm., 300mm. Width in M 20grade RMC
(Supplied through MCGMapproved plant) or concrete mixed with use
of weigh batch mixers as detailed in drawing No.DyChE/Rds/94/E.S.
dated 17.8.2005 inclusive of excavation in any soil except rock, laying
R2-RW-10-61 Rmt 471
of leveling course ofM 15 grade RMC 100mm. thick to required slope,
(inclusive of form work) jointing in 1:2 cm. prop. flush to concrete
surfaces as directed (Watertables shall be procurred from MCGM
registered agencies).

Extra Rate over and above all respective controlled concrete items for
R2-RW-10-62 using Ready Mix Concrete ( for a lead of 25 Km.) where batching plant Cum 667.449
cannot be errected.
XI GEOSYNTHETICS AND REINFORCED EARTH
Construction of sub surface drain 200 mm dia using geotextiles treated
with carbon black with physical properties as given in Clause 702
(MoRTH) formed in to a stable network and a planar geocomposite
R2-RW-11-01 structure, joints wrapped with geotextile to prevent ingress of soil, all as Rmt 2154
per Clause 702 (MoRTH) and approved drawings including excavation
and backfilling (Note:- Relevant revised MoRTHclauses ammended
upto date)
Construction of a narrow filter sub- surface drain consisting of porous
or perforated pipe laid in narrow trench surrounded by a geotextile filter
fabric, with a minimum of 450 mm overlap of fabric and installed as per
R2-RW-11-02 Rmt 941
Morth Clause 702.3 and 309.3.5 including excavation and backfilling
(Note:- Relevant revised MoRTH clauses ammended upto date)

Providing and laying paving fabric with physical requirements as per

clause 708.2.1 (MoRTH) over a tack coat of paving grade Bitumen VG-
10 , laid at the rate of 1 kg per sqm over thoroughly cleaned and
repaired surface to provide a water resistant membrane and crack
R2-RW-11-03 retarding layer. Paving fabric to be free of wrinkling and folding and to Sqm 127
be laid before cooling of tack coat, brooming and rolling of surface with
pneumatic roller to maximize paving fabric contact with pavement
surface (Note:- Relevant revised MoRTH clauses ammended upto
date)

Page 42
 USoR 2018 Roads Department
Providing, preparing and laying of geogrid crated apron 1 m x 5 m,
600 mm thick including excavation and backfilling with baffles at 1
metre interval, made with geogrids having characteristics as per
Clause 703 (MoRTH), joining sides with connectors/ring staples, top
corners to be tie tensioned, placing of suitable cross interval ties in
layers of 300 mm connecting opposite side with lateral braces and tied
with polymer braids to avoid bulging, constructed as per Section 700
R2-RW-11-04 (MoRTH); filled with stone with minimum size of 200 mm and specific Cum 1636
gravity not less than 2.65, packed with stone spalls, keyed to the
foundation recess in case of sloping ground and laid over a layer of
geotextile to prevent migration of fines, all as per Section 700 (MoRTH)
and laid as per Clause 2503.3 (MoRTH) and approved design. (Note:-
Relevant revised MoRTH clauses ammended upto date)

Reinforced Earth Retaining Wall : Reinforced earth retaining walls have

four main components as under: a)Excavation for foundation,
foundation concrete and cement concrete grooved seating in the
foundation for facing elements (facia material). b)Facia material and its
R2-RW-11-05
placement. c)Assembling, joining with facing elements and laying of
the reinforcing elements. d)Earthfill with granular material which is to be
retained by the wall.)

R2-RW-11-05-a Facing elements of RCC Sqm 3270

Assembling, joining and laying of reinforcing elements.
With reinforcing element of steel / Aluminium strips / polymeric strips.

R2-RW-11-05-b 1.Galvanised carbon steel strips Rmt 724

R2-RW-11-05-c 2.Copper Strips Rmt 724
R2-RW-11-05-d 3.Aluminium Strips Rmt 724
R2-RW-11-05-e 4.Stainless steel strips Rmt 724
5.Glass reinforced polymer/fibre reinforced polymer/polymeric strips
R2-RW-11-05-f Rmt 724
R2-RW-11-05-g With reinforcing elements of synthetic geogrids Sqm 3314
XII MAINTENANCE OF ROADS
Restoration of Rain Cuts (Restoration of rain cuts with
soil,murum,gravel or a mixture of these,clearing the loose soil,benching
for 300 mm width,laying fresh material in layers not exceeding 250 mm
R2-RW-12-01 Cum 221
and compacting with plate compactor or power rammers to restore the
original alignment,levels and slopes)

Maintenance of Earthen Shoulder (filling with fresh soil) (Making up

loss of material/ irregularities on shoulder to the design level by adding
R2-RW-12-02 Sqm 53
fresh approved soil and compacting it with appropriate equipment.)

Maintenance of Earth Shoulder (stripping excess soil) (Stripping

R2-RW-12-03 excess soil from the shoulder surface to achieve the approved level Sqm 13
and compacting with plate compactor)
Filling Pot-holes and Patch Repairs with open-Graded Premix
surfacing, 20mm (Removal of all failed material, trimming of completed
excavation to provide firm vertical faces, cleaning of surface, painting
of tack coat on the sides and base of excavation as per clause 503,
R2-RW-12-04 Sqm 134
back filling the pot holes with hot bituminous material as per clause
511, compacting, trimming and finishing the surface to form a smooth
continuous surface, all as per clause 3004.2 as per MORTH 5th
revision 2013)

Page 43
 USoR 2018 Roads Department
Filling Pot-holes and Patch Repairs with Bituminous concrete,
40mm.(Removal of all failed material, trimming of completed
excavation to provide firm vertical faces, cleaning of surface, painting
of tack coat on the sides and base of excavation as per clause 503,
R2-RW-12-05 Sqm
back filling the pot holes with hot bituminous material as per clause
504, compacting, trimming and finishing the surface to form a smooth
continuous surface, all as per clause 3004.2 as per MORTH 5th
revision 2013)
R2-RW-12-05a for grading IMaterial Sqm 288
R2-RW-12-05b for grading IIMaterial Sqm 288
Crack Filling (Filling of crack using slow - curing bitumen emulsion and
R2-RW-12-06 applying crusher dust in case crack are wider than 3mm.) Rmt 4

Dusting (Applying crusher dust to areas of road where bleeding of

R2-RW-12-07 Sqm 4
excess bitumen has occurred.)
R2-RW-12-08 Fog Seal Sqm 48
Crack Prevention courses. (Providing and laying of a stress absorbing
membrane over a cracked road surface,with crack width below 6 mm
after cleaning with a mechanical broom,using modified binder
complying with clause 521,sprayed at the rate of 9 kg per 10 sqm and
spreading 5.6 mm crushed stone aggregates @ 0.11 cum per 10 sqm
with hydraulic chip spreader,sweeping the surface for uniform spread
of aggregates and surface finished to conform to clause 902.as per
MORTH 5th revision 2013)

R2-RW-12-09 Crack Prevention Courses

Providing and laying of a stress absorbing membrane over a cracked
road surface,with crack width below 6 mm after cleaning with a
mechanical broom,using modified binder complying with clause
521,sprayed at the rate of 9 kg per 10 sqm and spreading 5.6 mm
R2-RW-12-09-a Sqm 75
crushed stone aggregates @ 0.11 cum per 10 sqm with hydraulic chip
spreader,sweeping the surface for uniform spread of aggregates and
surface finished to conform to clause 902.as per MORTH 5th revision
2013
Providing and laying of a stress absorbing membrane over a cracked
road surface,with crack width 6 to 9 mm after cleaning with a
mechanical broom,using modified binder complying with clause
521,sprayed at the rate of 11 kg per 10 sqm and spreading 11.2 mm
R2-RW-12-09-b Sqm 87
crushed stone aggregates @ 0.12 cum per 10 sqm,sweeping the
surface for uniform spread of aggregates and surface finished to
conform to clause 902. as per MORTH 5th revision 2013

Providing and laying a single coatn of a stress absorbing membrane

over a cracked road surface,with crack width above 9 mm and cracked
area above 50 % after cleaning with a mechanical broom,using
modified binder complying with clause 521,sprayed at the rate of 15 kg
R2-RW-12-09-c per 10 sqm and spreading 11.2 mm crushed stone aggregates @ 0.12 Sqm 114
cum per 10 sqm,sweeping the surface for uniform spread of
aggregates and surface finished to conform to clause 902. as per
MORTH 5th revision 2013

Providing and laying a bitumen impregnated geotextile layer after

cleaning the road surface,geotextile conforming to requirements of
R2-RW-12-09-d clause 704.3,laid over a tack coat with 1.05 kg per sqm of paving Sqm 214
grade bitumen VG-10 and constructed to the requirement of clause
704.4.5 as per MORTH 5th revision 2013

Page 44
 USoR 2018 Roads Department
Providing andlaying slurry seal consisting of a mixture of fine
aggregates,portland cement filler,bituminous emulsion and water on a
R2-RW-12-10 road surface including cleaning of surface,mixing of slurry seal in a
suitable mobile plant,laying and compacting to provide even riding
surface
R2-RW-12-10-a 5 mm thickness Sqm 74
R2-RW-12-10-b 3 mm thickness Sqm 51
R2-RW-12-10-c 1.5 mm thickness Sqm 32
Surface Dressing for maintance works.
Providing and laying surface dressing as wearing course in single coat
using crushed stone aggregates of specified size on a layer of
R2-RW-12-11
bituminous binder laid on prepared surface and rolling with 8-10 tonne
smooth wheeled steel roller
R2-RW-12-11-a 19 mm nominal chipping size Sqm 35
R2-RW-12-11-b 13 mm nominal size chipping Sqm 56
Repair of joint Grooves with Epoxy Mortar Repair of spalled joint
grooves of contraction joints,longitudinal joints and expansion joints in
R2-RW-12-12 Rmt 2325
concrete pavements using epoxy mortar or epoxy concrete)

Repair of old Joints Sealant (Removal of existing sealant and re

R2-RW-12-13 sealing of contraction,longitudinal or expansion joints in concrete Rmt 58
pavement with fresh sealant material)
Hill Side Drain Clearance (Removal of earth from the choked hill side
R2-RW-12-14 Rmt 35
drain and disposing it on the valley side manually)
Land Slide Clearance in soil (Clearance of land slides in soil and
R2-RW-12-15 ordinary rock by a bull-dozer D 80 A-12,180 HP and disposal of the Cum 62
same on the valley side)
Land slide Clearance in Hard Rock Requiring Blasting (Clearing of land
R2-RW-12-16 slide in hard rock requiring blasting for 50% of the boulders and Cum 145
disposal of the same on the valley side.)

Page 45
 Appendix-ASchedule for Road Works

BASIC RATES LIST ADOPTED FOR FRAMING THE SCHEDULE

(A) Labour
Sl. No. Code Description of Labour Unit Rate
1 LB-02 Welder Day 539.83
2 LB-05 Bhisti (Water Man) Day 490.68
3 LB-06 Blacksmith 1st class Day 587.29
4 LB-07 Blacksmith 2nd class Day 539.83
Breaker/Chisller/Hole driller/Jack Hammer operator
5 LB-08 Day 490.68
Semiskilled
6 LB-09 Carpenter 1st class Day 587.29
7 LB-10 Carpenter 2nd class Day 539.83
Coolie/Mazdoor/ Chowkidar/ Helper (Unskilled Male
8 LB-12 Day 443.22
abour)
Driver / Operator (for Road Roller, Concrete Mixer,
9 LB-13 Day 539.83
vibro-rollers, Truck,Jeep etc.)
Fitter (grade 1) / Drilling M/c Operator / Grinding
10 LB-16 Day 587.29
Machine operator / Erector
11 LB-21 Mason (brick layer) 1st class Day 587.29
12 LB-22 Mason (brick layer) 2nd class Day 539.83
13 LB-23 Mazdoor/Sweeper (female) Day 443.22
14 LB-24 Mechanic Day 539.83
15 LB-25 Miner or Rock blaster Day 490.68
OPERATOR OF PUMP GUNITE M/C OR
16 LB-26 Day 443.22
COMPRESSOR
17 LB-27 Painter semi skilled Day 539.83
18 LB-29 Plumber with tools 2nd class Day 539.83
19 LB-32 Semi Skilled Labour (Beldar) Day 443.22
20 LB-33 Supervisor/Mistry/Mukadam / Foreman/mate Day 539.83
21 LB-36 Tile Layer Day 539.83
(B) Usage Rates of Plant and Machinery
Sl. No. Code Description of Machine Unit Rate

1 HC-09 Hydraulic Excavator (3D) with driver and fuel (JCB) Day 6,500.00

Poclain HC.300 (including operator &

2 HC-12 Day 29,000.00
helper,diesel,etc.)
3 HC-13 Tipper truck with 5 cum capacity Day 4,800.00
4 HC-17 Loader Day 6,500.00
5 HC-21 Rock breaker Day 11,000.00
6 HC-22 Plate Compactor Day 500.00
7 HC-27 Tractor with trolley Day 1,850.00
8 HC-28 Air compressor 250 cfm Day 3,300.00
HC-28a Mixer with weigh batcher Day 3,000.00
9 HC-32 Concrete Mixer 0.25 to 0.40 cubic metre Day 1,000.00
10 HC-34 Transit Mixer 4.0/4.5 cum Hr 1,150.00

Pumping charges of concrete including Hire

11 HC-35 Cum 200.00
charges of pump, piping work & accessories etc.
Transit Mixer 4 cum capacity lead beyond
12 HC-122 tonne.km 4.05
1 Km, L - lead in Kilometer
13 HC-14 Diesel Truck - 9 tonne tonne.km 6,000.00
HC-31 Joint cutting machine with 2-3 blades Day 1,200.00
14 HC-36 Concrete Pump of 45 & 30 cum capacity Hr 150.00
15 HC-38 Water Tanker 5 to 6 KL capacity Hr 120.00
16 HC-40 Generator 33 KVA Hr 312.50
17 HC-42 Generator 100 KVA /125 KVA hr 1,167.00
18 HC-43 Generator 250 kVA Day 2,500.00
19 HC-58 Cranes 3 tonnes capacity Hr 450.00
20 HC-77 Vibrator (Needle type 40mm) Day 500.00
21 HC-77 Vibrator (Needle type 40mm) Day 500.00
22 HC-78 Roller 3T Day 3,550.00
23 HC-79 Roller 10-12 Tonne Day 6,400.00
24 HC-81 10 Ton Vibro Roller Day 10,000.00
25 HC-82 Screed Vibrator Day 720.00
26 HC-80 Vibratory Roller 8 tonne Hr 1,600.00

MUNICIPAL CORPORATION OF GREATER MUMBAI

 Appendix-ASchedule for Road Works

27 HC-83 Plate Vibrator Day 720.00

28 HC-84 Pneumatic Road Roller Hr 1,450.00
29 HC-85 Smooth Wheeled Roller 8 tonne Hr 500.00
30 HC-86 Dumper Day 2,500.00
Sensor Paver (Slip form paver with Electronic
31 HC-87 Day 22,000.00
Sensor)
32 HC-88 Ordinary Paver Day 11,000.00
33 HC-89 Mastic Cooker ( without diesel) Day 1,500.00
34 HC-90 Bitumen Pressure Distributor Hr 1,200.00
35 HC-91 Dozer 180 HP @ 60 cum per hour Hr 2,500.00

36 HC-94 Batching and Mixing Plant (a) 30 cum capacity Hr 2,550.00

37 HC-115 Concrete batching and mixing plant @ 15 cum/hr. Hr 2,010.00

38 HC-95 Production cost of the batch mix plant Cum 500.00

39 HC-96 Hotmix Plant - 120 TPH capacity Hr 31,700.00
40 HC-97 Hotmix Plant - 100 TPH capacity Hr 23,500.00
41 HC-98 Hydraulic Chip Spreader Hr 1,875.00
42 HC-99 Mechanical Broom Hydraulic Hr 500.00
43 HC-100 Mobile slurry seal equipment Hr 1,000.00
44 HC-101 Foden tractor trailor Day 4,000.00
45 HC-102 Mechanical Sprayer plant Sqm 10.00

46 HC-39 Generator blower, cutting machine water tanker etc. Shift 6,200.00

47 HC-116 Kerb casting machine Hr 325.00

48 HC-300 PNUEMATIC TYRE ROLLER sqm 24.28
Cost of accessories & equipment (for fixing of Batch
49 MC-1 No. 32,00,000.00
Mix Plant)
50 MC-2 Fix cost of the batch mix masticasphalt plant No. 7,00,00,000.00
Cost of accessories & equipment (for fixing of Batch
51 MC-3 No. 32,00,000.00
Mix masticasphalt Plant)
52 MC-4 Water tanks ( 10000 litres capacity ) No. 1,500.00
53 MC-5 Non - tilling mixer (with weigh batcher ) No. 3,42,000.00
54 MC-6 Laboratory equipment No. 10,00,000.00
55 MC-7 Cost of joint cutting machine with blade No. 3,00,000.00
56 MC-8 Cost of 2 spare blades No. 20,000.00
57 MC-9 Fixed Cost of PNUEMATIC ROLLER No. 35,00,000.00
58 MC-10 Fix cost of the batch mix plant No. 3,00,00,000.00

(C) Materials
Sl. No. Code Description Unit Rate
1 MA-GN-01 Cement MT 4,812.50
2 MA-GN-02 White CEMENT bag 750.00
3 MA-GN-04 Artificial crushed sand Cum 1,765.00
4 MA-GN-05 Plaster Sand Cum 2,544.00

5 MA-GN-06 Stone Aggregate (Metal I) : 6-12 mm nominal size Cum 1,271.19

Stone Aggregate (Metal II) : 20-32 mm nominal

6 MA-GN-07 Cum 1,271.19
size
7 MA-GN-08 Stone Aggregate (Metal III) : 40 mm nominal size Cum 1,306.50

8 MA-GN-09 RUBBLE FOR MASONARY Cum 636.04

9 MA-GN-10 RUBBLE FOR SOLING Cum 636.04
Coarse graded Granular sub-base Material 4.75
10 MA-GN-12 Cum 1,271.19
mm to 2.36 mm
Boulder with minimum size of 300 mm for Pitching
11 MA-GN-15 Cum 873.00
at Site
12 MA-GN-16 Gravel/Quarry spall at Site- Min 40 Kg wt Cum 950.00
13 MA-GN-17 Stone grit Cum 1,624.29
14 MA-GN-18 Murum Cum 850.00
15 MA-GN-20 Mild Steel bars MT 40,000.00

16 MA-GN-21 HYSD Bars-Fe 415 (Twisted steel / deformed bars) MT 42,000.00

17 MA-GN-24 Gunny bag No. 7.00

18 MA-GN-27 Diesel Ltr 67.00
19 MA-GN-28 PETROL Ltr 81.00

MUNICIPAL CORPORATION OF GREATER MUMBAI

 Appendix-ASchedule for Road Works

20 MA-GN-31 Binding wire Kg 60.00

21 MA-GN-32 Water Ltr 0.15
22 MA-GN-33 Bricks 4" 1000 Nos. 5,000.00
MA-GN-43 RMC M40 Cum 5,600.00
24 MA-RW-003 Colour Cement bag 1,841.00
25 MA-RW-004 Lime Kg 6.00
26 MA-RW-006 Stone Aggregate : 63 Mm Nominal Size Cum 671.00
27 MA-RW-017 L.D.O Ltr 34.00
28 MA-RW-018 Emulsion Rs Ltr 28.00
29 MA-RW-019 Cut Back Ltr 36.00
30 MA-RW-020 Bitu Men 30/40 (VG-40) Kg 26.54
31 MA-RW-021 Bitumen (60-70 grade)/ VG-30 Kg 25.04
32 MA-RW-022 Bitumen 10/20 Kg 24.24
33 MA-RW-023 CRM B -60 Kg 22.50
34 MA-RW-024 PMB -40 Kg 28.50

35 MA-RW-133 Road Marking Paint - Yelow White Black Oil Based Ltr 203.00

36 MA-RW-026 Jointsealing Compund Kg 50.00

37 MA-RW-027 Asphalt Filler Sheet12 mm Thk Sqm 220.00
38 MA-RW-029 Primer For Jointsealing Ltr 87.00
Interlocking Paver Blocks (Supply of paver
block including Transporting loading,
unloading to the site)
39 MA-RW-030 60 mm thick unishape concrete pavers Sqm 475.00
40 MA-RW-031 80 mm thick unishape concrete pavers Sqm 550.00
80 mm thick unishape gray cement concrete
41 MA-RW-032 Sqm 592.00
interlocking pavers
60 mm thick unishape gray cement concrete
42 MA-RW-033 Sqm 572.00
interlocking pavers
60 mm thick Lacquer coated ( Reflective)
43 MA-RW-034 Sqm 540.00
interlocking gray cement concrete pavers
80 mm thick gray cement concrete Lacquer coated
44 MA-RW-035 Sqm 678.00
(Reflective) interlocking pavers ( Terra Cotta)

45 MA-RW-036 100 mm thick interlocking concrete unishape pavers Sqm 687.00

100 mm thick gray cement concrete unishape

46 MA-RW-037 Sqm 807.00
pavers (Terra Cotta)
60 mm thick Lacquer coated ( Reflective)
47 MA-RW-038 Sqm 592.00
interlocking white cement concrete pavers
80 mm thick Lacquer coated ( Reflective)
48 MA-RW-039 Sqm 725.00
interlocking white cement concrete pavers
60mm thick Beganit concrete paver block with
49 MA-RW-040 Sqm 1,051.00
Stone texture on top surface
Concrete Paving Slabs(Flagstone)
50 MA-RW-041 Sqm 807.00
400X400X60mm thick
51 MA-RW-042 Concrete Paver blocks 200X200X60mm thick Sqm 678.00

52 MA-RW-043 Concrete Paver blocks 200X200X80mm thick Sqm 1,186.00

Concrete cobbles 100X100X60mm thick with shot

53 MA-RW-044 Sqm 690.00
blasted texture
60 mm thick Heritage paver interlocking white
54 MA-RW-045 Sqm 1,829.00
cement concrete pavers
80 mm thick Heritage paver interlocking white
55 MA-RW-046 Sqm 2,416.00
cement concrete pavers
56 MA-RW-050a Coloured Granite of size 200 x 200 x 40mm thick Sqm 1,722.40

Vitrified Ceramic Topping Paver Blocks of size 150

57 MA-RW-048 Sqm 1,022.68
x 150 x 80mm thick
Vitrified Ceramic Topping Paver Blocks of size 150
58 MA-RW-049 Sqm 807.38
x 150 x 60 mm thick
59 MA-RW-050 Concrete cobbles 150X150X80mm thick Sqm 1,253.00
RED & BLACK GRANITE cobble stones of 100mm
60 MA-RW-051 Sqm 1,750.00
x 100mm x 100mm
Cobble Stone in size: 100 x 100 x 100mm in grey
61 MA-RW-052 Sqm 1,700.00
colour

MUNICIPAL CORPORATION OF GREATER MUMBAI

 Appendix-ASchedule for Road Works

62 MA-RW-053 60 mm combi paver Sqm 1,181.00

63 MA-RW-054 Stone colour Wall Tile Sqm 1,075.00

Cement Concrete Precast Header of M-50 grade IN

64 MA-RW-055 WHITE CEMENT with COLOUR of size: 500 mm Rmt 1,012.00
length x 325 mm height x 150 mm thick
Cement concrete Kerb Stone of M-25 grade IN
WHITE CEMENT with COLOUR of size: 500mm
65 MA-RW-056 Rmt 779.00
width x 325 height x 165mm thick (Half Batter, Bull
Nose / Full Batter)
66 MA-RW-129 Precast Slab 1050x500x45 (M-25) No. 1,365.10
Water Dished Channel size : 600 x 300 x 80mm (M-
67 MA-RW-130 Rmt 373.00
40 grade )
Pre-cast concrete header for Paver Blocks- size
68 MA-RW-131 Rmt 619.30
500mm x 325mm x 150mm(M-50)
Cement concrete Kerb Stone of various grades of
69 MA-RW-132 size: 500mm width x 325 height x 165mm thick Rmt 597.00
(Half Batter, Bull Nose / Full Batter)
70 MA-RW-057 Emulsion SS1 Ltr 26.50
71 MA-RW-058 Antistriping Agent Ltr 80.00
72 MA-RW-059 Emulsion MS Ltr 20.00
73 MA-RW-060 Lub. Oil Ltr 120.00
74 MA-RW-061 Coaltar For Shuttering Ltr 38.00
75 MA-RW-062 Additives (Portland cement) Kg 6.00
76 MA-RW-063 Carbon core 20mm thk MT 42,570.00
77 MA-RW-064 Wonder patch 20mm thk MT 20,873.00
78 MA-RW-065 Wonder binder Kg 513.00
79 MA-RW-066 Steel Fibres Kg 83.00
80 MA-RW-067 Thermacol 5 mm Thick Sqm 17.00
81 MA-RW-068 G.I. corrugated sheet of 2.44*0.75 m. Sheet 530.00
82 MA-RW-069 Ballis 3"Ø No. 224.00
83 MA-RW-071 R.C.C. Hume Pipe 150Mm Dia (NP 2 Class) Rmt 210.00
84 MA-RW-072 R.C.C. Hume Pipe 250 Mm Dia (NP 2 Class) Rmt 330.00
85 MA-RW-073 R.C.C. Hume Pipe 300 Mm Dia (NP 2 Class) Rmt 412.50
86 MA-RW-074 Shahabad Stone 23X15X5 cm No. 13.00
87 MA-RW-075 Hassan Cloth Sqm 13.00
High Density Polythene Pipe (H.D.P.Pipe)(30Cm.
88 MA-RW-076 No. 10.00
Long With Cap )
89 MA-RW-077 Waterproof Paper 40 Gsm Sqm 8.00
90 MA-RW-078 Admixture Ltr 76.00
91 MA-RW-079 Curing Compound Ltr 76.00
Stone crusher dust finer than 3mm with not more
92 MA-RW-083 Cum 1,404.00
than 10% passing 0.075 sieve.
94 MA-RW-094 Bitumen (80-100 grade )/ VG-10 MT 24,240.00
95 MA-BW-039 Bitumen (emulsion) MT 35,692.00
96 MA-BW-042 Bitumen (modified graded) MT 44,924.00
97 MA-RW-099 Connectors/ Staples Each 12.00
Electric Detonators @ 1 detonator for 1/2 gelatin
98 MA-BW-056 100 Nos. 2,530.00
stick of 125 gms each
Epoxy compound with accessories for preparing
99 MA-BW-057 Kg 1,650.00
epoxy mortar
100 MA-BW-059 Epoxy primer Kg 190.00
101 MA-BW-064 Gelatin 80% Kg 127.00
102 MA-RW-104 Geo grids Sqm 105.47
103 MA-RW-105 Geomembrane Sqm 375.87
104 MA-RW-106 Geonets Sqm 626.08
105 MA-RW-107 Geotextile Sqm 125.00
106 MA-RW-108 Geotextile filter fabric Sqm 125.58
107 MA-RW-109 Joint Sealant Compound Kg 136.00
108 MA-RW-110 Paving Fabric Sqm 62.79
109 MA-RW-111 Perforated geosynthetic pipe 150 mm dia Rmt 197.00
110 MA-RW-112 Polymer braids Rmt 479.00
111 MA-RW-113 Primer Kg 159.00
Reinforcement strips 60 mm wide 5 mm thick as
112 MA-RW-114 Rmt 491.00
per clause 3102. (Copper Strips)

MUNICIPAL CORPORATION OF GREATER MUMBAI

 Appendix-ASchedule for Road Works

Reinforcement strips 60 mm wide 5 mm thick as

113 MA-RW-115 Rmt 491.00
per clause 3102. (Galvanised carbon steel strips)

Reinforcement strips 60 mm wide 5 mm thick as

114 MA-RW-116 per clause 3102. (Glass reinforced polymer/fibre Rmt 491.00
reinforced polymer/polymeric strips)
Reinforcement strips 60 mm wide 5 mm thick as
115 MA-RW-117 Rmt 491.00
per clause 3102. (Stainless steel strips)
Reinforcement strips 60 mm wide 5 mm thick as
116 MA-RW-118 Rmt 491.00
per clause 3102. Aluminium strips)
Super plastisizer admixture IS marked as per 9103-
117 MA-BW-095 Kg 190.00
1999
Synthetic Geogrids as per clause 3102.8 and
118 MA-RW-120 Sqm 2,252.25
approved design and specifications.
119 MA-BLD-HW-5 Unstaked lime MT 600.00
120 MA-RW-134 20 ltr. Capacity drum No. 38.00
121 MA-RW-135 Ice flakes Kg 2.20
122 MA-RW-136 Matrex cold patch 25 mm thk MT 20,241.00
123 MA-RW-137 Special Admixtures =ELECIUM-51 Ltr 125.00
124 MA-RW-138 Special Admixtures = GLANIUMSKY784 Ltr 128.00
125 MA-RW-139 Polypropylene fibers Kg 300.00
126 MA-RW-140 Fly ash Kg 1.98
127 MA-RW-141 Elkem Microsilica Kg 40.70
128 MA-RW-142 Admixtures BASF Glanium SKY784 Ltr 128.00
129 MA-BLD-GN-25 Plasticizer / super plasticizer Kg 40.00
130 MA-BLD-PN-11 Synthetic enamel/ Oil paint Ltr 123.55
131 MA-BLD-PN-10 Primer for oil paint Ltr 114.60
132 MA-RW-123 Mould @ Rs. 3000 @ 100 repetitions No. 42.00
133 MA-RW-124 Mould @ Rs. 3500 @ 100 repetitions No. 48.00
132 MA-RW-127 Supplying 600 mm x 900 mm frame & cover No. 13,035.00
133 MA-RW-128 Supplying 900mmx900mm frame & cover No. 17,250.00
136 MA-RW-300 Conversion & Transportion Charges MT 2,900.00
132 MA-RW-129a Backer Rod Rmt 8.00
Kerb stone 30 cm.to 40 cm. long., 15 cm. wide, 38
133 MA-RW-143 No. 87.00
cm. deep
Water tables of stone of size 30 cm wide and 10 cm
134 MA-RW-144 No. 38.00
thick
Setts Stone of size 15 cm. to 25 cm. long, 10 cm.
135 MA-RW-145 No. 16.00
wide and 15 cm. deep
136 MA-RW-146 Sapling Each 59.00
Polyethylene plastic water/sand fillable Metro
137 MA-RW-147 Barricades having approx. size 1840mm. X No. 5,800.00
440mm. X 1900mm., (LxWxD)
Polyethylene plastic water/sand fillable Barricades
138 MA-RW-148 having approx. size 2000mm. X 560mm. X No. 4,500.00
1000mm., (LxWxD)
139 MA-RW-149 Structural Steel Barricades MT 73,692.00
140 T-50 Transportation charges Shift 3,500.00
141 CS-EW-50 Carting Charges OF HAND CART Trip 36.30
142
142 MA-RW-200 RMC M20 Cum 4,800.00

MUNICIPAL CORPORATION OF GREATER MUMBAI

 Appendix-ASchedule for Road Works

Direct Used Items/common Schedule /

Transportation Charges
1 CS-EW-15 & 16 Excavation over area of roads Cum 213.84

2 CS-CW-1-c Cement Concrete - Nominal Mix of 1:3:6 -M10 Cum 4,790.51

Cement Concrete - Nominal Mix of 1:3:6 -M10 -

3 CS-a Sqm 479.05
100 mm thick
P/L RM M-20 grade concrete for RCC work (using
4 CS-CW-1-a Cum 5,312.18
cement @ 330 kg/cum) - All work upto plinth level

Providing and laying in position machine batched

5 Cum
and machine mixed design mix M-40 grade
Lintels, beams, plinth beams, girders, floor beam,
6 CS-CW-7d Cum 7,241.43
coping.
Extra and over for providing richer RMC of M-40
7 CS-CW-19 Cum 1,064.00
grade cement concrete instead of M20
8 CS-CW-30-a Formwork Sqm 225.93
9
Cement Mortar 1:6 (1 Cement: 6 Coarse/ Fine
10 CS-PW-56 Cum 3,955.62
Snad)
Reinforcement for R.C.C. work all complete. -Upto
11 CS-CW-35-a MT 53,105.08
plinth level Mild steel bars.
Providing, detailing, fabricating and fixing at desired
location using hot rolled sections and MS Plates of
12 CS-SS-01 MT 60,195.20
grade Fe 250 as per specifications and approved
fabrication drawings
Providing and constructing Brick masonry 230 mm
13 R2-CS-MW-3-b Cum 5,470.55
thick (IInd sort) in c.m. 1:4
14 T-1 Transortaion of Surplus Items (lead 3 km)-Earth Cum 284.66

Transortaion of Surplus Items (lead 3 km)-

15 T-2 Cum 455.46
Excavated rock
Transortaion of Surplus Items (lead 25 km)-
16 T-3 Cum 707.26
(eg.Earth)
17 T-4 Beyond 3 km,per km lead - Excavated rock Cum 30.73
Transortaion of Surplus Items (lead 25 km)-
18 T-5 Cum 1,131.62
(eg.rock)
19 T-6 Excavation including Transporation (25 km) Cum 1,345.46
20 T-7 Material Transport to site anywhere in City MT 502.94
21 T-8 Cost of transportation (FROM RMC PLANT) Cum 502.94

Transport & sprading of hot bitumen any where in

22 T-9 MT 1,005.88
city/ Suburbs using mechanical sprayer
23 T-10 Lead for E/W borow area to site km 8.00
24 T-11 Lead from Mixing Plant to working site km 20.00
Transportation of frame & covers = 4200 / trip / 105
25 T-12 No. 50.00
nos
Transportation of frame & covers = 4200 / trip / 70
26 T-13 No. 70.00
nos
T-11 & T-13 Avg of T-11 & T-13 cum 45.00
27 OT-1 Electricity LS 50.00
Oil paint/ synthetic enamal paint in two coats with
28 CS-PN-4-c Sqm 103.12
one coat of primer for Steelwork
Pre-cast RCC M-35 facing elements of size as per
29 DI 1.03 Cum 13,320.00
design and 18 cm thick for 75 sqm.
30 CS-CW-35-b HYSD steel @ 5 kg / sqm MT 55,205.08
31 R2-DC-10 C.M. 1 :2 for resting frame 20 mm thicks Cum 5,708.55
32 CS-FL-74 Basic Cost of Mortar CM 1:4 Cum 3,745.79
33 DI 3.00 Plant charges MT 228.52
34 DI 4.00 Cost of Mechaical Sprayer plant Sqm 8.00
Lead from Mixing Plant to working site km 20.00
Transportation cost for 25 km Cum 667.45
35 OT-2 Electricity 2 LS 35.00
36 DI 10.0 Cost of Mechaical Sprayer plant 2 Sqm 8.00
37 OT-3 Electricity 3 ls 5.00

MUNICIPAL CORPORATION OF GREATER MUMBAI

 Appendix-ASchedule for Road Works

38 MA-200 Headers 10 nos. cum 3,950.54

39 DI-11a Rolling by vibratory roller 8-10T Sqm 6.99
Sensor Pavers and rollers 10T Vibratory + Power +
40 DI-12 Pneomatic Sqm 30.78

41 DI-13 Pavers and rollers 2 sqm 18.64

42 DI-14 Pavers and rollers 3 sqm 14.01
43 DI-15 Pavers and rollers 4 sqm 6.99
44 DI-16 Rolling by Vibratory Roller rate sqm 7.41
45 DI-17 Fix cost of the milling plant No. 2,39,21,700.00
46 DI-18 Cost of generator (for fixingPlant) No. 33,66,000.00
47 DI-19 Cost of JCB No. 25,00,000.00
48 DI-20 Cost of Weigh bridge No. 8,80,000.00
49 DI-21 Fencing Rmt 2,750.00
50 DI-22 Spreading Sensor Paver sqm 11.44

51 DI-23 Spreading Ordinary Paver / Motor grader - 10 x 4.00 sqm 7.01

52 MA-201 For 10% Breakage Area (100 mm thick interlocking) sqm

747.00
Excavation including Transporation for fixing the Edge
53 CS-EW-101 restrain cum 170.16

54 MA-202 Cost for P.C.C.(M15) for 1Cu.m cum 4,851.46

55 MA-203 10 % breakrage of Combi paver (Avg.) sqm 1,541.56
56 MA-204 M.S. angle 50*50*5 mt. 166.12
57 MA-205 1:3:6 CC cum 4,790.51
58 CS-CW-102 Cost of M - 15 bed CC, 15 cm thick as per 35 cum 3,950.54
59 CS-CW-103 Laying of sensor paver sqm 7.01
60 DI-11b Rolling by vibratory roller b sqm 7.41
61 DI-11c Rolling by vibratory roller c sqm 18.64
62 DI-11d Rolling by vibratory roller 3T sqm 4.14
63 DI-11e Rolling by vibratory roller 10T & Paver sqm 14.01
64 DI-11f Rolling by vibratory roller f sqm 18.44
65 CS-CW-1-b Cement Concrete - Nominal Mix of 1:2:4 -M15 Cum 5,185.62

Contractor's profit and Overhead charges 15%

1 LB-LM-01 Plant operator Month 18,000.00
2 LB-LM-02 Mastic Mixer Driver Month 10,800.00
3 LB-LM-03 Paver operator Month 24,000.00
4 LB-LM-04 Roller Operator Month 14,400.00
5 LB-LM-05 Helper Month 7,200.00
6 LB-LM-06 Quality control Engineer Month 30,000.00
7 LB-LM-07 Loader Operator Month 10,800.00
8 LB-LM-08 Laboratory Chemist Month 10,081.20
9 LB-LM-09 Plant Manager Month 30,000.00
10 LB-LM-10 Laboratory Asst. Chemist Month 10,800.00
11 LB-LM-11 Junior Engineer Month 18,000.00
12 LB-LM-12 Mechanic Month 18,000.00
13 LB-LM-13 Electrician Month 10,800.00
14 LB-LM-14 Supervisor Month 10,800.00
15 LB-LM-15 Security supervisor Month 10,800.00
16 LB-LM-16 Watchman Month 7,200.00
17 LM-22 Land Development Sqm 120.00
18 LM-23 Power and water connection(for batch mix plant) lumpsum 9,60,000.00
19 LM-24 Road Sqm 1,200.00
20 LM-25 Office and laboratory (for batch mix plant) Sqm 7,200.00
21 LM-26 Land Cost Sqm 1,080.00
22 LM-27 Screed Vibrator No. 36,000.00
23 LM-28 Plate Vibrator No. 26,400.00
24 LM-29 Needle Vibrator No. 18,000.00

MUNICIPAL CORPORATION OF GREATER MUMBAI