“inn

1 ^OID }> -<j ■

gpjnsscisS .--fiC5
F 'Gissn-^ mV (St-
®0]2naiuxt« a

Sep? i
Jr ■

Pi b«si<s «**%?»§§
" W-JaA i:-j •cv,.«M«;
Suoro.mi
SE?i r*t_tr> v;
XV V n uV^t\ O
 Digitized by the Internet Archive
in 2018 with funding from
Kahle/Austin Foundation

https://archive.org/details/makingfantasticjOOOOroma
 To Maurizio

Many thanks to:

Maurizio Minora, Filippo Minora, Marina Dell’Orto, Ezio Grazioli,

Donatella Zaccaria, Maria Pia Salfati, Lucio Loli

Giovanni Varenna, collector, for the yellow blender

my mother and sister

Editor: Cristina Sperandeo

Photography: Alberto Bertoldi
Translation: Chiara Tarsia
Graphic design and layout: Paola Masera and Amelia Verga with Beatrice Brancaccio

Library of Congress Cataloging-in-Publication Data Available

10 987654321

First paperback edition published in 2002 by

Sterling Publishing Co., Inc.
387 Park Avenue South, New York, NY 10016

Originally published in Italy under the title Gioielli fai da te by RCS Libiri S.p.A.
via Mecenate, 91, Milan, 20138

©1998 by RCS Libri S.p.A., Milano

I Edizione Grandi Manuali Fabbri ottobre 1998
English Translation © 2001 by Sterling Publishing
Distributed in Canada by Sterling Publishing
c/o Canadian Manda Group, One Atlantic Avenue, Suite 105
Toronto, Ontario, M6K 9E7, Canada
Distributed in Australia by Capricorn Link (Australia) Pty Ltd.
PO. Box 704, Windsor, NSW 2756, Australia

Every effort has been made to ensure that all the information in this book is accurate. However, due to differing
conditions, and individual skills, the publisher cannot be responsible for any injuries, losses, and other damages
which may result from the use of the information in this book.

Printed in China
All rights reserved

Sterling ISBN 0-8069-7941-0 Hardcover

ISBN 1-4027-0124-1 Paperback
 Paola Romanelli

MAKING
FANTASTIC JEWELRY

Sterling Publishing Co., Inc.

New York
 %>; «•
”&V' \ <'

INTRODUCTION . 6 JEWELRY MADE WITH NATURAL MATERIAL 59

Africa . 6
India .. 8 Pinecone Necklace
The Americas . 10 Shell Necklace.
Orange Peels and Al
MATERIALS.is Mosai

Tools. 16
Wires and Threads . 17
Findings. 18

TECHNIQUES.21
The Project . 22
Stringing Beads. 24
Making a Bead Tray. 26
Before Stringing. 27
Gold Wire and Screw Clasp. 30
Some Tips for Real Pearls. 31
USING METALS
PAPIER-MACHE 33 Pendant Necklace
Brass Necklace ...
Making Papier-Mache: What To Do 34
Necklace. 38
Necklace and Earrings 42
Tinfoil Necklace. 54
 Marbled Necklace
Earrings.
Rubber Necklace ....
Spring Coil Necklace
B ri g htly-QStofeeUsllee I-
Colored/Tubing. .

JEWELRY DECORATIONS 111

JEWELRY DECORATED
Necklace with Felt Strips. 112
WITH ODDS AND ENDS
Bracelets and Necklaces with 116 Safety Pins.
Wooden Tees and Sh
Colored Pencils.
Electrical M
Crystal.
Pasta.
Buttons.
Candy .

INDEX

r *

* . ' ^ A .■ 'V '

i* I
 INTRODUCTION

The presence of jewels can be found throughout AFRICA

history. It is impossible, in fact, to indicate any In Africa everything is used for jewelry; all sorts of
civilization—whether sophisticated or primitive—in organic and mineral materials are worn on the
which jewels were not used for ornaments. body. On the one hand we find natural
Archeological findings give witness to the ancient, substances, such as ivory, bone, shell, amber, and
enduring presence of jewels in the past. A jewel coral, which are found in their natural state and are
is not merely a decorative element, but is also a fairly simple to work with. On the other hand, there
means of communication. From a single jewel, we are also some materials that require more
can learn the history of ancient man and the complex work processes. Wood, in the shades of
characteristics of contemporary human beings. brown, terracotta, and cream, is finely worked to
Necklaces, bracelets, rings, and earrings aid us in make beads, or is cut into animal shapes. Wood is
identifying the tribe or race of origin, the official many times seen its original colorings, reminiscent
position, social class, civil status, etc. of their of the desert, or brilliantly colored, recalling local
owners. fabrics. Bone has recently replaced ivory and is
The materials that were used to make the jewelry often accompanied by silver beads. The white
tell us the level of craftsmanship reached by a spines of fishes are often used for simpler
particular society as well as their attributed value. ornaments. The “cauri”, a small shell, is often seen
The body, in all of its parts, finds in jewelry an ally in African jewelry. Its scientific name is Cypraea
that can be used to highlight or hide, defend or moneta, and it appears to have originated in the
seduce—something, that is, that can share in the Indian Ocean. It was first collected along the
various cycles of existence. Maldives coast; it spread gradually towards Bengal
and then arrived in Africa. These precious shells,
already famous in the days of the Egyptian Pharos,
were exchanged for gold, ivory, and slaves, and
soon began to represent valuable currency.
While the “cauri” were used as money, gold,
instead, was used exclusively for jewelry
ornaments. The most extraordinary examples are
the earrings of the Mali women. These ornaments,
four lobed and spiral shaped, can reach
astonishing sizes and even weigh up to a
pound. These earrings often lacerate their ear
lobes; so, to avoid this from happening the women
tie them to a cord of red thread and pass it over
their heads, stretching it from ear to ear.
INDIA or worked into metals. The splendid colors of
India offers an extraordinary variety of jewels. From glass, beads, and bracelets are inspired from the
birth, the women are adorned with jewelry every gaudy feathers of parrots, the blue tails of
moment of their lives. The people of India believe peacocks, and the yellow flowers of the mimosa.
that jewels have the ability to make women into Silver is the most widely used metal throughout the
idols in addition to highlighting the grace of their entire Indian subcontinent, whether north or south,
movements. Bracelets, anklets, nose rings, and toe east or west. Beaten, engraved, or embossed, silver
rings are a part of daily life and give a regal look, is often the only material used in making jewelry.
even to women of a modest standard of living who It is also turned into beads of different shapes
can only afford cheap materials such as glass or and sizes and alternated with other materials such
iron. Nature is often the source of inspiration for as coral, turquoise, and amber. Silver is also used
Indian jewelry. Numerous decorative motifs derived as a supporting element for setting semi-precious
from flowers, seeds, and fruit are either interlaced stones of various shapes and colors.
 ■ :l|«n
^pf•iiT' V ®|f^pv ^Jp "* Mi, %

IWlI jgte^'c;' -Qj ufejfcV' ' (> 1| ■pill RpH is- l«tWB
ifKJ ftji-M
THE AMERICAS basic material for certain kinds of jewelry.
Working precious metals was widespread in Latin South American Indians widely practice the
America from the beginnings of the pre-Columbian goldsmith’s art, which they learned from Spanish
civilizations. These peoples believed that gold was craftsmen. Here, silver is certainly the favored metal
produced by the sun and silver from the tears of and it is often used as a background for turquoise
the moon. Expert goldsmiths have always used overlays and mosaics. Natural materials such
the techniques of hammering, melting, and as tortoise carapace and black coral are still used
chiseling to obtain real works of art. These to make bracelets, trinkets, and necklaces.
precious metals were often worked to produce In the Amazon, bird feathers and beetle
images of divinities—an example is the silver shells provide the means for making jewelry
trinket bearing the likeness of the god Tumi, which ornaments.
is widely worn in Peru. In Brazil even the children plait leather cords and
Terracotta is molded in Mexico into both produce complex and diversely colored
geometrical and animal-shaped forms and is the decorations.

&a a

1' m «.
 Beads the creation of
Beads were made and masterpieces with mosaics
used more than 40,000 in miniature.
years ago and are a From one continent to
characteristic of all cultures another, particular models
on all the continents. and production techniques
At first natural materials, have developed over the
easily available, were used centuries.
and worked by hand, such The mass production
as bone, ivory, wood, stone of beads, especially by
chips, and shells. Later, industries using low-cost
glass became produced by materials, has created
industrial techniques that a huge selection for
gave rise to the mass many people at all social
production of beads and to levels.

Animals decorated with many items,

Some countries practice such as colored cords
the custom of hanging threaded with glass beads,
ornaments around the colored ribbons, gilt wires
necks of animals. In India, with shells, pendants, and
for example, camels are small bells.
 Rosaries
The use of beads has not
been limited to only
ornamental functions, but
also possesses a religious
one as well. Rosaries,
crowns of grains that are
counted as they slip
through one’s fingers, can
be found in many religions,
such as Hinduism,
Buddhism, Islam, and
Christianity.
The Roman Catholic rosary,
along with the crucifix that
is attached to the beads,
can be made be made of
beads, gems, wood, and
other materials.
The Hindu rosary is made
up of 108 beads. The bead
with the bow indicates the
beginning and ending of
prayer. It may be made of
wood, but is often
constructed with seeds—
the Rudraksha nuts, which
come from Java, being the
most precious.

WE
 onale? Si n*
j restino tali
no o die i 4k

assiM^i
Diego Sossai
*a enorme die so||
Reoar Pesaro, Fabrnio 3 y nedia incMtria Pescara In'-pa^H
l irnA‘npifgiona‘c^;-i ■ iche conunSsas Setfa^p
KijK^Giuseppc a Monza Pn

—-
SWaiia^ayw-^,'

|S§§§|
■Krkjm
^*1 ’’ ^^Mlplpyg
(
,y ffip^ B ^'SSB' Ew JUfjgm
■ ^ \vB

z '■*** sm ■ &r*z-ys^.
^' T \ ilgl^ w|f
:,v;- jiCT "Sal 1
-
MilUP >BB
« JKI

m f-r * S vm ff y/7^{ \\

% ^ Jfes*.
>•'’ JrArf lr 1
MATERIALS

TOOLS
Needles used for making rings and - needle - adhesive silicone
There are different kinds jump rings with wire - half-rounded Paints and Varnishes
of needles for all types - flat nose, which are used - fine-grained, which are Whether transparent or
of wire, for making knots, for bending wires used for filing cut wires opaque, paint is always
and for making holes in - chain nose, which are Scissors useful for protecting jewelry
seeds. Some of the more used for opening jump It is best to use small-sized made with easily damaged
important needles you rings and tightening scissors with sharp, thin materials.
will want to start with clasps blades. Brushes
are those: Wire Cutters Bead Reamer You can use any kind of
- common for sewing These are used to cut This is useful for making brush for painting, but flat
- with a small eye for wires and metal sheets holes in any type of brushes should be used for
beads cleanly: material. spreading varnish.
- with a big eye for cords - a metal cutter cuts large Glues Adhesive Tape
Pliers wires and metal sheets Many different types of glue You will use adhesive tape
There are many kinds of - side cutting pliers are may be used according to to stiffen the end of cotton
pliers designed especially used to cut small wires the material they are to be cords that need to be
for jewelry making, but the Files applied to: threaded without a needle.
most commonly used are: The market offers the - white glue (PVA)
- round nose, which are following types: - epoxy

16
 MATERIALS

WIRES AND THREADS

Nylon Wire Cord to use a clasp with elastic ornaments made of plastic
Use nylon wire with or This is available in various cord. materials.
without a needle; it is good colors and sizes and, with Leather Cord Music Steel Wire
for stringing heavy beads numerous knots, can be This is available in various The most common
Fishing Wire used for jewelry made with colors and is useful for measurements are:
This is very resistant. natural materials. If it is thin, stringing large beads, stones, - V4 inch for neck wires
Silk Thread it may be threaded. Wax and natural materials. - Vs inch for hooks
This comes with one cord allows beads to be Lace - Vi e inch for stringing
or two incorporated strung more easily. Lace is easy to use beads
needles that range from Cotton Cord because the ends are Brass Wire
number 0 to number 12. This is particularly useful already pre-cut, which The most common
It is available in a wide when the hole is fairly large. makes them easy to insert measurements are:
range of colors. It may be used with a into objects. - V4 inch for neck wires
Cotton Thread needle or an end may be Ribbon - Vs inch for hooks
This thread, which is stiffened with adhesive Ribbons are ideal for Copper Wire
available in many colors tape, glue, or nail polish. covering wooden rings and The most common
and sizes, is suitable for Elastic Cord plastic tubes. measurement for copper
stringing beads or for This is good for stringing Rubber Cord wire is V4 inch, which is
covering rubber tubing. bracelets. You do not need This is good for all used for “caging".

17
 MATERIALS

FINDINGS
Findings are small, metal have one ring that circles - Hook and Eye Clasps are Spacer Bars
elements used in making around itself. Use these for made of two parts that - These are used for
jewelry. a more secure hold. hook onto each other. necklaces with many
- Spring Ring Clasps are Gold and Silver Wire threads or cords. They help
FINDINGS FOR rings that have an opening - These wires are tightly keep the rows apart.
NECKLACES AND that can close. wound and are used to Neck Wire
BRACELETS - Lobster Claw Clasps protect silk thread. - Neck wire is made of
function like spring ring Cord Caps metal rings that have a
Clasps clasps; they resemble a - Cord caps come in hook for fastening.
There are various types of lobstehs claw. various shapes. They are
clasps: - Screw Clasps are made placed at the ends of cords
- Jump Rings are universal up of two parts that screw and threads.
connector rings that are together. They have a metal Crimp Beads
attached to the ends of ring at each end to which - These are small clips
wires or threads to fasten the thread or wire ends are used for blocking the
on either the jewelry itself knotted. thread when it has been
or another type of clasp. - Barrel Clasps are used to knotted. There are various
- Split Ring Clasps are fasten necklaces with two types available with or
essentially jump rings, but wires or threads. without holes.

18
 MATERIALS

FINDINGS FOR EARRINGS various shapes and sizes. OTHER JEWELRY Rings
- Ear Screws have a ring or FINDINGS Jewelry can be mounted
The following are findings a base for attaching the onto these ring bases.
for pierced ears: earring. Barrettes
- Ear Wires are hooks of Nail Wires These have snap-clasps in
various shapes and Besides being employed iron, nickel, and silver and
lengths that have rings for setting earrings, come in various lengths.
from which to hang the these are also useful for Brooches
earrings. hooking pendants onto These pins come in
- Srewback Earrings have a necklaces: various shapes and sizes.
ring for attaching the earring - Headpins are a V4 inch They have a base to which
and a butterfly fitting to thick and come in various any material can be glued
tighten behind the ear lobe. lengths. on. They also have holes
- Ear Posts have a flat - Drop Wires are round for attaching wires.
base onto which the earrings. Hat Pins and Lapel Pins
earring is glued. These were created to
The following are findings decorate hats and coat
for non-pierced ears: lapels. They are often
- Clip-On earrings come in finished with a tapering bead.

19
TECHNIQUES

THE PROJECT

When planning to make a

necklace, it is best to first
prepare a drawing so that you
can decide on the shape
and the length. If you would
like to create a traditional
type of necklace, the length
of the wire will depend on
many factors such as your
height, the clothing that you
intend to wear it with, and the
style you want to express.
Remember that the length of the
wire must always be increased by 4
inches so that you will be able to make
and attach the clasp. Here are some standard decreasing
lengths that will serve as a reference: length—about IV2
-choker, length 14 inches inches less for each
-neck wire, length 16 inches row. They can join
-“princess”, length 18 inches into one wire at
-“matinee”, length 24 inches about halfway along
-“opera”, length 35 inches the neck wire, or be
-“rope”, length 44 inches. kept separated by
When the length has been chosen, decide on what spacer bars along the
beads you would like to use. If you intend to string whole length. The size
pearls or beads following the order of their sizes, use and weight of the beads
a wire with two needles. Begin at the center with the will determine both the type of wire to use and the
biggest bead and continue to string smaller beads shape of the necklace—with the weight placed
(in a sequence) on both sides. You could, of course, in the center, it will take on a “V” shape; with weight
use beads of the same size and separate them from evenly distributed, it will take on a more rounded
each other with other smaller beads, using different shape. If you use music steel wire or brass wire as
colors or materials. If you do not have any small the supporting base, the necklace will have a circular
beads, knots will do fine for separating. Before you shape. You can use these same techniques to make
begin, spread out your sequence on a jewel tray; this bracelets. The circumference of a bracelet varies
will allow you to make any adjustments or changes. according to the size of one’s wrist, but it is usually
The necklace may be made with various wires of between 6 and 7 inches.
 TECHNIQUE

STRINGING BEADS m

Materials

39 INCHES OF SILK THREAD,

NUMBER 9
44 PEARLS, Va INCH IN
DIAMETER
2 CRIMP BEADS
1 SCREW CLASP
ROUND AND FLAT NOSE
PLIERS
SCISSORS
CARDBOARD

,■■ ,

* » iljlji 4' ifi

<4’u 'WSi."

1 1 1 Ifr «$pl ^ 1 ^ plllflilll

. f ' ■ M ■ -■■■ ■■-V t .;
. >L #* wkdf . i ; ■-< ., * v' 4
1 ;u ' b„ |glpi . „’<s , | , °oo' ■* v \ j % ,1 I
’’i
r Ihf 1
*■’.-(is;.: ■ >.;. * H1 ■ m
5 \ I f
1:•• ■ 4,'j»n . as*.. *a*« MMynBnM , J
,

* <M ii~\n ■ • f % \
' v.' '-'^V
TECHNIQUES

MAKING A BEAD TRAY

Obtain some cardboard that

is at least 12x5 inches, and fold
it lengthwise in two.
Fold the two halves again
lengthwise. You now should have
an ‘‘M”-shaped tray onto which you can lay your pearls.
■■Rl You could make your tray the same length as your
necklace or bracelet so that you will be able to estimate
the exact number of pearls needed. Place them in order
Jll§9i$ along the groove.

26
 TECHNIQUES

BEFORE STRINGING

A neckband of I&/2 inches will need 44 pearls, V4 inch in

diameter.
Take a thread of white silk number 9 and thread the
needle. Make a knot at the end opposite of the needle.
Insert a crimp bead and slip it along the thread until you
reach the knot. Place the knot into one of the crimp bead’s
hemispheres and then close with flat nose pliers. You will
have a sphere containing the knot.
Let the end of the thread stick out—it will later be cut off
when the necklace is finished.

27
TECHNIQUES

Insert the first pearl and slip it to the crimp bead. All the knots must be placed near the pearls to prevent
Knot the thread and, keeping the knot loop wide, slip it them from moving.
along to the pearl with the help of a needle. After stringing the last pearl, insert the crimp bead and
Tighten the knot well. knot.
Insert another pearl and make the same knot as before.
 sggll * f

TECHNIQUES

Close the crimp bead as before. Using two pliers, open the ring of the clasp, hook it onto
With scissors, cut off any threads that hang from the crimp the ring of the crimp bead, and then close it carefully with
bead. the flat nose pliers.
At this point use a screw clasp to fasten the necklace.
TECHNIQUES

GOLD WIRE AND SCREW CLASP

String all the necklace beads using

a threaded needle at both ends.
Cut about a V2 inch of gold wire
(a fine wire wound tightly into
a spiral). Pass the needle inside the
fine-gold wire. Create a loop and
insert the needle into the last
pearl, blocking the thread with
a knot. Take the jump ring on the screw clasp and open
it with two pliers.
Insert the jump ring into the loop you made with the
fine-gold wire. Close it with flat nose pliers and repeat
the operation at the other end of the necklace.
 TECHNIQUES

SOME TIPS FOR REAL PEARLS

Pearls, especially when of value (not artificial), need more attention than other precious stones.
Put them on only when you are already dressed so that they do not get caught in your clothing.
Perfumes and hair spray contain substances that can damage them. Saline and chlorine are harmful and
weaken the thread. Therefore, it is advisable to remove your pearls before taking a bath or shower.
Always clean pearls by polishing them with a cloth. The absence of light and air causes the surface pf pearls
to crack; so, they should be worn often to keep their luster intact.
 '' 1 ^WP
jBpp^r-
a?
jsifl?' 8 If ' ^"4 i^4* If p|'?" 3jji§£fffi
*883
 Materials

PAPER (BROWN PAPER BAGS,

NEWSPAPERS, EGG CARTONS,

TISSUE PAPER, OR PAPER

napkins)

RUBBER GLOVES

STRAINER

BOWL

BLENDER

SMALL PLASTIC BAGS

i||l®pra»F
s/'Mi
POWDERED WALLPAPER PA^E

TABLESPOON

...

sSSSStl I§5®SHI
-M

sjg*3 W» ""
^*fe«<*«**i ff>
■ *£KS5I *5 \1 ^
«sk$ -naA-^*^^. ^ nwPT®® \l,

'tSs*,**
papier-mAche

Tear the paper into small pieces and place them in water. A blender can be used to get a perfectly smooth result.
Shred the paper pieces in the water and knead them into Place the pulp into a strainer and squeeze well to
pulp. Use rubber gloves when doing this. eliminate excess water—do not, however, dry it too much.

36
 PAPIER-MACHE

If the pulp is too much for In the lower right photo are some examples of papier-
your needs, keep it in an mache made with different kinds of paper.
airtight plastic bag to keep it
damp (freezing bags are
ideal). If it is left out, the paste
will become dry in about
half an hour and be
unusable.
To create papier-mache,
glue must now be added.
Powdered wallpaper paste is the best, but white glue (PVA)
will do just as well.
Dissolve the powder carefully in water, following the
instructions and measurements indicated on the package.
Mix until the solution has a gel consistency.
Gradually add sufficient quantities to ensure a soft, elastic,
and workable paste that is similar to bread dough. Knead
well to eliminate all lumps.
Your papier-mache is now ready to use.

37
papier-mAche

NECKLACE
 papier-mAche

Materials

PAPIER-MACHE
LONG TOOTHPICKS
GLUE
NYLON THREAD
SCISSORS
SPATULA* OR TEASPOON
COLOR PAINTS AND BRUSHES
OPAQUE ACRYLIC VARNISH
BLACK BEADS
,vMimssstmii

ROUND AND FQ\T NOSE

PLIERS

Take a small amount of Insert a toothpick into the

papier-mache and ball and rotate it delicately.
knead it into a small ball Using the same amount
that is V2 inch in diameter. of papier-mache, make
Smooth the surface another small ball of the
using a spatula or a same previous size.
teaspoon. Continue to make bigger
balls so that you have two
equally sized balls in each size. Make one huge ball for
the center of the necklace. You will have a papier-machd
“pearl’’ necklace.

39
papier-mAche

Let the balls dry for several days far from heat. Make sure Decorate as desired with
that unsightly cracks do not appear; if they do, smooth the a fine brush.
surface with a spoon. Let the paint dry well
Once the balls are dry, paint them by holding them with a every time you change
long toothpick the color. Finish with a
Since newspaper was used for the necklace shown, the light coat of an opaque
papier-mache looks dark. It is, therefore, advisable to acrylic varnish.
spread a coat of a white primer before you paint them.

String the balls on the

nylon thread, separating
each one with a black
bead. If your necklace is
long enough you can do
without a clasp and just
knot the thread.

40
Here are some
examples of how a
necklace can be
fastened. Some of
the clasps are made
of papier-machd.
PAPIER-MACHE

42
papier-mAche

43
papier-mAche

Necklace - Take a glass Wrap it around the jar

jar or a tin can with a and smooth the surface
circumference of about well with a spatula or
2 inches. Mold a small spoon to eliminate all
amount of papier-mache imperfections—pay
into a long, narrow special attention to the
shape. edges.

Let the necklace dry The necklace may be painted with paint or Indian ink.
for several days and then You could even add the color directly to the papier-mache.
slide it delicately off the You could also keep the original color of the papier-mache,
jar. particularly if it is made of cardboard or brown wrapping
paper, and decorate it by scorching various areas with the
tip of a welder.
When the work is finished, spread a coat of a transparent
varnish to protect the necklace and to give it a glossy look.

44
 PAPIER-MACHE

Necklace - Take a papier- You could also cut lager

machb necklace and sized strips of paper and
cover it with newspaper glue them on at the end
that has been cut into of the work to enrich the
small strips. Dissolve decoration. Let dry.
1 tablespoon of water to Spread a coat of a
5 tablespoons of glue transparent-glossy acrylic
and coat the necklace varnish.
with a brush, moistening
the strips carefully with the mixture.

Necklace - Take the

cardboard that is in a roll
of toilet paper.
Cut it along the joining
until it is completely open.
Trim off some edges to
give it a more attractive
shape. Cut the newspaper
into small pieces and
cover the cardboard with them, using a brush dipped in
water and glue. When dry, coat with a protective varnish.

45
papier-mAche

Ring -To make a ring, it is essential to have a stiff support Wrap it around the tube and smooth it, trying to give the
to work the papier-mache on. Choose a tube of the same ring the desired shape. Remember that the thinner part
circumference as your finger and work the papier-mache must be turned towards your palm. Leave to dry color as
into a long, narrow shape. wished and proteet the ring with a coat of varnish.

Barrette - Use your own Open the metal barrette

imagination with and take out the central
geometrical and fancy piece. Carefully pry out the
shapes, but if you run out papier-machb from the
of ideas, try using cookie mold and warp it around
cutters. Fill them with the metal base of the
papier-machb. Press the barrette.
papier-machb firmly with
your fingers and smooth with a spoon.

46
 PAPIER-MACHE

Using a spatula, smooth the papier-machb and attach it

firmly to the barrette’s base. Reapply the central piece of
HESS®-
metal, let dry, and then paint
PPIt

; ; V ■, .

2, t
.M.mm.S.:
dHHSB * ■ l

. Hi MlSl H S. f .
 Here are some exotic and1
delightful 'necklacesmade
^wjth^p^plir-machd balls.
:gln the fifsfexampje the
“pearls” are-painted With
Indian ink (a-fine paintbrush
. was used), in the second,
the, natural color of papier-
mache was kept.
 PAPIER-MACHE

Instead of papier-mache
balls, one necklace here
has small parallelepipeds
separated by red wood
beads. The other has little
.cylinders painted with
Indian -Ink on the sides
.....' and separated -by
... ... pinecone shells.
In the necklace and
bracelet shown here, the
papier-mache was worked
without being smoothed— The three rows of this
In this bracelet gold paint
the balls are wrinkled and necklace are kept apart by
was spread with a dry
irregular. a spacer bar, also made of
brush to highlight the
uneven surface. papier-mache. Three holes
were bored in it, and the
threads were joined into
one beyond the spacer bar.

■ V
 PAPIER-MACHE

——

51
Let your imagination run
wild and you can make
papier-machd ornaments
of all shapes and colors

These irregular balls, the

color of the paper and
lightly varnished to shield
against water, can be
strung on neck wire or
knotted on a thin cord.

,: /■ ■
jw*'
 PAPIER-MACHE

Materials

tinfoil
THREAD
SPRING RING CM\SP
2 CRIMP BEADS
3 JUMP RINGS
SCISSORS
ROUND AND FLAT NOSE
PLIERS
SEWING NEEDLE
2 EYE NEEDLES
2 EAR SCREWS

Take some tinfoil and v

wrinkle it a little.
Cut pairs of squares. ^
Start at Vs inch
and increase
the size by ?

increments p
of V2 inch until ■ \‘

you reach 4
inches.
Roll the tinfoil into round
balls.
Place the tinfoil “'pearls” in a
pearl tray in their ascending
order of size.
.. .. a
mbyimt

55
papier-mAche

Pierce all the pearls Insert a silver colored

with a needle. crimp bead and place
Take the thread, the knot in it with pliers.
preferably nylon,
and make a knot at
one end.

When finished, block the

with scissors. thread again with a
String the pearls in their crimp bead and attach
ascending order. the spring ring clasp.

56
 PAPIER-MACHE

Earrings - Use two tinfoil

pearls of different sizes
for each earring. Pierce
the earrings with the eye
needles. Take a silver
colored eye needle and
insert it. With round nose
pliers, make a loop with
the excess wire.
Si
■Bill

- I
L - V
r
 JEWELRY MADE WITH NATURAL MATERIALS

Materials

1 LARGE PINECONE

COLORED WOODEN BEADS

BEAD REAMER

ROUND AND FIAT NOSE

PLIERS

SCISSORS

SIDE CUTTING PLIERS

BACK WAX CORD

RNE WIRE (BRASS), Vs-INCH THICK

1 ARGE WOODEN BEAD

OPAQUE VINYL VARNISH

2 EAR WIRES

2 JUMP RINGS

Strip about twenty pinecone

shells, which contain its
seeds, from a dry pinecone.
With a bead reamer, make
a small hole in the
narrowest part of each shell.
Cut twenty pieces that are
about3/4-inch long from the
brass wire.
JEWELRY MADE WITH NATURAL MATERIALS

Take a piece of the brass Take a piece of the brass

wire, make a small loop wire, make a small loop
with the round nose with the round nose
pliers, and insert the wire pliers, and insert the wire
into the hole of the pine into the hole of the pine
shells. shells.

With the black wax cord,

string on a ring and two
different-colored beads.
Repeat this operation
eight times.

62
 JEWELRY MADE WITH NATURAL MATERIALS

Take some more wax cord and string a wooden bead. A big wooden bead could
Continue this sequence nine times. be fastened. String it at
Lay the two rows out flat and knot them together so that one end of the thread and
they barely overlap. block it with two knots,
one on each side. Make
a loop at the other end
and block it with a knot.
To protect the shells, you
can finish with a coat of
an opaque acrylic varnish.

Earrings - Take a shell Insert the piece of metal

for each earring and into the holes of the two
pierce it on top with the wooden beads and
bead reamer. Insert a close with another jump
piece of brass wire ring. Attach an ear wire of
and fasten with a the same metal.
jump ring. / Repeat the ^
process
for the other f
earring.

63
 Dried fruit and big and
small seeds that are both
round and tapering are
used to make these
necklaces. In some of the
necklaces, small, colored
beads were used to
separate these elements.

The large red seeds of the This simple necklace Here is a necklace that is
Cycas revoluta, together with was made with chili made of carob pods and
the small seeds of the peppers strung together. other large flat pods. Small
medlar, are strung together fragments of gilt wire attach
on fine brass wire that is the various pieces, leaving
attached to a neck wire, also the jump ring barely visible.
made of brass but thicker.
A large Mexican bean
and cones from the
Terra del Fuego, together
with fish vertebrae and
black beads, were used
to make this simple When the cones of the
necklace. cypress dry, they separate
from the branches, take on
a brown color, and open,
creating a sphere. In this
necklace wooden beads
were added to separate the
cones from each other.

Here, the large seeds of

the South American
walnut were alternated
with glass beads and
colored disks.
A cord acts as a support
for the necklace.
 This original three-row
necklace is made of light
shHHH
and dark dried beans.

n
wS

Acorns, nutshells, and

medlar seeds have been
strung on three rows,
which were then united by
a spacer bar made of
papier-mache.

1 5
: ■
. .
 MjSf

gmm X0\* ^ >gjr t

#- :*' . ,/JC. ■’- fsPr'Mit*1
-> SBjSgaSsJjfe.
1 £i
Hf tgi ■
HP v*. 'v<i

as, ~T*er,ja . .. a .-§F r%tr s sj»c ^^-IMU ’•'igy gjf ■ !( - &Jr > '■^‘fhc \».
iSiPf!ilS
U *4K»i*#'-^f ire*' <J£ •' :'-
P*W j5rrx^ Kr ,|W;«“' ' 'V^vLjHKS
r!!P«jfjk:» JT vF%. - J|4 *s& ' 111 Tng”iif f ^*JMpBh&oEf ;1| S<J Jr ..'«"%^3i ,.£?-« * If
Ww j1g? jK " 2hML .fcgffjjSSj t j^-'^l^yf:
I8i$-4J^* ^ «r
*¥m. 1 Smt% fM
io ^ Ti\J9lr *1E22
lJjp<r^/' M ft* Srir.T^L^a^trS
 JEWELRY MADE WITH NATURAL MATERIALS

Materials

SHELLS (BETTER IF ALREADY

pierced)

BEAD REAMER

SCISSORS

CORD

Obtain some shells. Close with a shell tied to

If you are lucky some will one end of the cord and
already have holes in block with two knots, one
them. If not, pierce the on each side. Make a
shells with a bead loop at the other end of
reamer or a drill. String the cord that is big
them on a piece of cord enough for the shell to
and, if necessary, make pass through.
knots to keep them
separated.

69
, -

-mmm

A long piece of cord

was used to string these
small, twisted shells.
The necklace may also
be worn by wrapping two
rows around the neck

A single, eye-catching
shell is the center of
attention in this easily
made necklace, and is
accompanied by glass
beads and cylinders of
semi-precious stones.

Large, smooth white

shells are strung on
a colored cord and are
alternated with flower
petals, citrus fruit peels,
and dry leaves on this
necklace.
mmWm
 Strung together here Mediterranean seeds,
are pumice stones of together with smooth
various sizes that are and twisted branches
alternated with seeds. and clusters of shells,
are the elements that
were used in the two
necklaces in the center.

■a- -
■
 Pieces of smooth,
The earrings shown here twisted wood,
were created with attractive polished by the
pieces of wood and simple movement of the sea
pierced shells. A small seed and sand, can easily
provides the decorative be found on the
element. A simple ear wire beach and turned into
is attached to them. beautiful necklaces.
JEWELRY MADE WITH NATURAL MATERIALS

ORANGE PEELS AND ALMONDS

74
 JEWELRY MADE WITH NATURAL MATERIALS

Materials

ORANGE PEELS

ALMONDS (WITH THEIR

shells)

BEAD REAMER

SIDE CUTTING PLIERS

ROUND NOSE PLIERS

16 INCHES OF MUSIC STEEL

WIRE, V4-INCH THICK

7 INCHES OF MUSIC STEEL

WIRE, Vs-INCH THICK

Cut the orange peel into eight

segments. Leave them to
desiccate in a dry place between
two paper towels or newspaper
with a weight on top (to prevent
the peels from buckling).
Take nine almonds and pierce
the center of the shells with a
bead reamer.
Pierce the eight pieces of orange
peels at one end.
JEWELRY MADE WITH NATURAL MATERIALS

Cut Vs-inch long strips Insert a strip of the music

from the Vs-inch thick steel wire into one of the
music steel wire with orange peel pieces.
side cutting pliers. Using Bend the inserted end
round nose pliers, make with pliers to obtain a
a small ring at one end small ring. Repeat this
of each piece. operation with all of the
orange peels.

76
 JEWELRY MADE WITH NATURAL MATERIALS

Seeds, shells, and even These feathers, rice grains,

fishing floats make up and pasta rings strung on
the components of this a black-colored cord recall
necklace, which is the ornaments of the North
finished off with a American Indian tribes.
sequence of red seeds.

An assortment of petals,
leaves, and flowers on fine
wire decorates this neck
JEWELRY MADE WITH NATURAL MATERIALS

78
 JEWELRY MADE WITH NATURAL MATERIALS

Materials

A HANDFUL OF SMALL SEA

| 4mmP
\ 1111
■£
GLASS PIECES IN VARIOUS

H ig»gB SHADES OF GREEN

1? A SHEET OF ALUMINUM

24 INCHES OF MUSIC STEEL

wire, Winch thick

ROUND NOSE PLIERS

SIDE CUTTING PLIERS

METAL CUTTER

EPOW GLUE

SMALL-GRAINED SEMI-

ROUNDED NEEDLE RLE

TOOTHPICKS

SHEETS OF PAPER

FELT PEN

Y:' '

Draw a design of your With a metal cutter, cut

choice on a sheet of out the shape and file all
paper. It could be a around the edges.
regular geometric shape, Pierce a hole at the two
an abstract one, or a form ends to attach the hooks
inspired by nature. We or rings. Take some
chose a dolphin for this pieces of smooth glass
necklace. Cut out the and lay them onto the
shape and place it on a cutout shape, choosing
sheet of aluminum (if you do not have aluminum, use colors ranging from white to dark green. Try to cover the
another smooth, stiff material). Mark the outline on the whole area of the shape, leaving small spaces between
aluminum sheet with a felt pen. the glass pieces.

79
JEWELRY MADE WITH NATURAL MATERIALS

With a toothpick spread Continue to glue the

a little bit of glue on one glass pieces. When
part of the aluminum finished, place a weight
shape and start gluing on top to keep your
on the glass pieces in mosaic under pressure.
order, (in this case,
beginning with the head).
 JEWELRY MADE WITH NATURAL MATERIALS

Attach one end of a piece of steel wire to a ring on the

necklace. Bend the other to form a hook, which will pass
through the hole made in the metal shape.
Repeat this operation on the other side.
 SSI

.. .. •■■■-. — - %
^ - < « 1 > s*
rj

sfH“’: Lp^,..l:; :
.,-: ... ... ■. . ■

. j*£&>
 vWjm
'''•Wmh
If N : .

. ;:-y 3
V ' ' -:

1 1 '%r
' ;i: v " ■
i. . . w ';
 Mr
: 1 «^ife

USING METALS IlSSi .„.Si*sS

w
.."ll,i
i,
i ij
j
*,

84
 USING METALS

Materials

METAL BEADS

16 INCHES OF MUSIC STEEL

WIRE, V4-INCH THICK

MUSIC STEEL WIRE, Vs-INCH

THICK

SOLDERING IRON

SOLDER

ROUND AND FLAT NOSE

PLIERS

SIDE CUTTING PLIERS

FILE

Take the Vs-inch thick With a soldering iron, melt

music steel wire and cut a drop of solder and
thirteen 6-inch long strips. attach it to the music
Take the 16-inch long steel wire at about 1V4
music steel wire and turn inch from the end.
it into a neck wire.
With the pliers, make a
ring at one end.
Make a small ring at
each end of the thirteen wire strips. String a metal bead on
each strip.

85
USING METALS

: :

String a bead and again Attach the pendant to the

attach a drop of solder. neck wire.
Continue like this to the Repeat this process for
end. Close the opposite the other twelve strips,
end of the wire with a separating each one with
small ring to prevent the a bead.
beads from falling off.
 With brass, copper, or steel Colored wooden beads
wires, you can enclose and tiny glass beads make
stones, terracotta fragments, up the pendants shown
marbles, or colored sea on the necklaces and
glass. When making rings, bracelets on the opposite
wrap the wire around a page. The base is made
base with the same of music steel wire with
dimensions as your finger. a varying thickness.
Attach the stone you intend The copper wire could also
to use, and wrap it around be strung with glass beads
until it remains firm. and then attached to a clip.
With the same technique
you can make a barrette.
Attach the wire to a clip
and then wrap three
smooth, round stones with
copper wire.
f'O ?; ;,\S
USING METALS

90
 USING METALS

Materials

SHEET OF BRASS

A MESH BRASS NET

16 INCHES OF BRASS WIRE,

V4-INCH THICK

ROUND AND FLAT NOSE

PLIERS

METAL CUTTER

SIDE CUTTING PLIERS

EAR WIRES

With the metal cutter, cut

two 3 x V2 inch
rectangles and two
3/4x 3A inch squares
from the sheet of brass.
From the brass net, cut a
2 x 1 inch rectangle and
two 3A x 3A inch squares.

AT
USING METALS

With pliers, bend the Take the brass net

brass wire to make a rectangle and fold back
neck wire. Create a small the short side over the
ring at one end and a center of the neck wire.
hook at the other for the Tighten it with flat nose
clasp. Carefully file the pliers. Attach the two
cut ends. brass rectangles onto the
sides of the brass net
rectangle and twist them
around the wire.

Twist the two brass net

squares around the neck
wire to form two triangles.
Repeat the same
operation with the brass
squares, making them
slightly overlap the brass
net squares. Tighten well
with pliers so that all the
elements are firmly in
position.

92
 USING METALS

«hh^h

Earrings - With the Lightly press the brass

metal side cutting pliers, net with pliers to keep
cut two 3 x 3 V2 inch the desired shape. Cut
rectangles from the brass two half-moon shapes
net, each one will be an from a sheet of brass.
earring. Roll the
rectangles into cones.

Attach the half-moons by

sticking the tips in the
mesh. Fasten on a ring
to the top of the cone
and insert an ear wire.
 These four triangles,
made from two different
hammered metals, were
joined together
in pairs with small rings.

Copper and brass are the

raw materials used in these
ornaments. Metal sheets
cut into geometrical shapes
and fine-meshed metal
nets were bent, assembled,
and beaten in different
ways and patterns.

:tW
-W'iWtTf
UGH*
JEWELRY MADE WITH RUBBER

Materials

PINS WITH COLORED G^\SS

HEADS
2 EYE NEEDLES
16-INCH LONG PIECE OF
SOLID RUBBER, 3/4-INCH THICK
SCISSORS
ROUND AND FLAT NOSE
PUERS
4 JUMP RINGS (2 BIG AND 2
small)
BARREL CLASP
V4-INCH THICK RUBBER TUBE
GLUE

98
 JEWELRY MADE WITH RUBBER

Make sure that each pin sticks out about Y inch.

To close the necklace, insert an eye needle into the
center of the tube’s end.

Attach a jump ring to one

end and a barrel clasp to
the other.

•'K'v,

A
-""'A

mmm
JEWELRY MADE WITH RUBBER

Earrings - With the Glue the two ends of the

same technique, earrings rubber tube together.
can be made by using a
1 A-inch thick rubber tube.
Cut a 4-inch long piece
for each earring. Insert
the pins after having
broken them in half.

Hold them firmly together

for a few minutes. Insert an
eye needle that is shorter
than the tube piece and
attach it to an ear wire.
 To make earrings in the
same style as the necklace,
take a 6-inch long piece of
rubber, Vnnch thick, and
make a knot Glue a
jump ring the back

Solid rubber is the basic

element for the examples
shown here. It is soft to the
touch, easy to cut, and easy
to knot. Glass beads have
been used as the decorative
element in the necklace
with several rows, whose
trimmings, also in rubber,
are of various sizes.

101
Here is another earring
made from the same type
of rubber tubing that was
used for the necklace.
Cut a 3\/2-inch long piece
and make a knot at the
end. Insert a 1 x1/2-inch
spring coil. Make a metal
hook to attach the jump
ring and ear screw on.
 JEWELRY MADE WITH RUBBER

Materials

24-inch long piece of

RUBBER TUBING, V4-INCH
THICK
8 2 X V2-INCH SPRING COILS
SCISSORS

Take the rubber tubing

and insert it into eight
spring coils.
Fasten off the necklace
with a simple knot.

103
JEWELRY MADE WITH RUBBER

BRIGHTLY-COLORED NECKLACE

104
 JEWELRY MADE WITH RUBBER

Materials

A HANDFUL OF SMALL SEEDS

MIXED WITH CAKE
DECORATIONS
18-INCH LONG PIECE OF
TRANSPARENT RUBBER
TUBING, V4-INCH THICK
ADHESIVE TAPE
2 CORD CAPS WITH CLASPS
SCISSORS
ROUND NOSE PLIERS
GLUE

Cut the transparent Close one end of the

rubber tubing. rubber tubing with
adhesive tape.
JEWELRY MADE WITH RUBBER

Pour some seeds into the palm of your hand and slip
them into the tube through the open end.
Bang the end of the tube on the table now and then to
allow the seeds to tightly pack.

Seal off the other end with

adhesive tape. Place a drop
of glue inside both cord
caps and insert them onto
both ends.
 All of these ornaments are
madejrom pieces of
transparent rubber tubing.
Somesare filled with colored
beads, others with seeds
or sparhps, and still others
1th confectionery.
Attractiveseffects can also
be achieved by using
water colored with food
coloring. When making
these moqels, the ends
were glued.
 For the earrings, string small
pieces of colored tubing
onto an eye needle. On one
end, create a ring and attach
a jump ring and ear screw.

108
 JEWELRY MADE WITH RUBBER

Take rubber tubing of Insert a crimp bead and

four different colors, and proceed until you reach
cut them slantwise into about 27 inches
11/4-inch long pieces Alternate the four colors
With the nylon thread Attach a barrel clasp with
and a needle, pierce pliers
each piece at about half
of its length.
 EttawMWBIjHffmf'V.yg.
glBlJ&'iTli

fpll alii 11 WWw&zj

-

j v-5
|®Lpi4
fnfifiifl

i fei ||i||| Mifi

MKf 1 §v l jpBBtii WT^W-' ’

.’•? -' rjjgSBjaggSn^

■}1Mir’' JB^Sw r-■■
"i Twwt-. v
■■
Ill I
 JEWELRY DECORATIONS

Materials

m FELT CLOTH IN TWO COLORS

NYLON THREAD
COLORED LEATHER CORD
TOOTHPICKS

ii GLUE
NEEDLE
GLASS BEADS
SCISSORS

•kSc - *>£* «' »» **«t»»w* ■nigMi8V*4»>feu?.KKM!V^«^<1^M|

« ■<HiUJW>t««(l«VS.'n VMIKIKrf■•>« >K» MUM >-«»<•»»• ,(.
lu^mi »«Jt> w.

"•••*SS3»«2feW®

.. i

Cut two felt cloths into Make sure you evenly

two 11 x V2-inch strips. wrap them so that the
Overlap them, keeping two colors show in the
their edges together. spiral.
Wrap them around a When you have finished
toothpick this delicate operation,
glue the ends of the
strips down, being
careful that the outer
piece slightly overlaps and covers the inner piece.

113
JEWELRY DECORATIONS

Using a needle and the nylon thread, string large glass With a colored leather cord knotted to the nylon thread,
beads. Begin with six. Then, insert the rolls of cloth, string again just the six initial and the six final glass beads.
separated by other glass beads. Finish with six large glass
beads.

For the clasp, you could

use a roll made with
some felt cloth in one
of the colors with a loop
at the other end.

t&S

|30-tijui ox PiA oyyffv ^

. ’ ■■■■■ ■ .
.
This necklace is made of
silk cords of many colors
that are twisted together
and held at the ends
by wrapped brass wire
to which a clasp was
then attached.
 JEWELRY DECORATIONS

Materials

SILK THREAD CORD

SCISSORS

FLAT NOSE PLIERS

GLUE

ADHESIVE TAPE

2 GOLD-COLORED CORD

CAPS

1 SPRING RING CO\SP

/aKe some core maoe You could also tighten

of twisted silk threads. the metal with flat nose
Measure 6 inches in pliers. Attach a spring
length and, at that point, ring clasp.
wrap the cord with a
piece of adhesive tape to
prevent it from fraying
before and after cutting.
Take two gold-colored
cord caps and squeeze a drop of glue into each one.
Insert the two ends of the cord.

117
JEWELRY DECORATIONS

Earrings - Take a pair

of ordinary wooden
curtain rings.
Cover each ring with
colored satin ribbon.
Glue the ribbon at the
beginning and at the
end of the rings.

Wrap the whole surface

around once more with
silver trimming.

With some fine wire,

make two or three turns
around the earring and
make a little loop.
Attach a jump ring and
the clasp.

118
 JEWELRY DECORATIONS

Here is a striking necklace

made with rubber tubing,
which has been covered
with various-colored silk
threads. A gold thread was
also applied at various
places as well. Gold thread
adorns the two ends, to
which the clasp was added.

immll

119
V ii
 POLYMER CLAY

Cernit, Fimo, Formello, harder as it falls. If baked in

Sculpey III, and Prima are the oven at 212° F-248° F
polymer clays that are or boiled in water, polymer
excellent to work with. clay hardens and becomes
The vast range of colors resistant to the heat, cold,
Your hands are the main Your hands and workspace
available is sufficient to dampness, and water.
tools for working with must be washed
satisfy all of your needs. To boil this material, place
polymer clay. The other thoroughly before
Attractive marble effects the beads you have made
simple pieces of beginning since this clay
can be obtained by mixing in a pot of cold water.
equipment are: a knife, picks up every spot of dust
various colors together. Pleat to 212° F and let them
toothpicks, a glass jar to and residue of other
The clay can be exposed boil for five minutes. This
smooth the clay, and previously used colors.
to the air; although it is technique, however, is not
tinfoil—they are all most
a good idea to wrap it in suitable for objects of large
likely in your kitchen
plastic wrap once it is dimensions because the
already!
taken out. The clay is, steam shakes the clay
however, sensitive to heat. creations, which damages
It becomes softer as the them. After they have boiled,
temperature rises and let them cool in the water.

123
POLYMER CLAY

124
 POLYMER CLAY

Materials

POLYMER CD\Y IN THREE

DIFFERENT COLORS

KNIFE

TOOTHPICKS

COLORED LEATHER CORD

OPAQUE TRANSPARENT

VARNISH

SMALL PAINTBRUSH

Take the three polymer Wrap the cylinders

clays (in this project: dark around each other. Make
green, light blue, and a small ball and work it
purple). To create a until you get the desired
marbled effect, make effect. The more you
small cylinders of various work the paste, the fewer
sizes with each of the streaks you will have
clays—big ones with the since the colors tend to
green, thin ones with the blend.
blue, and very thin ones with the purple. The more streaks
you wish to have, the more different-sized colored cylinders
you will have to prepare.

125
POLYMER CLAY

When the ball is finished, Repeat this operation

pierce it with a toothpick and make all twenty
Dampen your hands with marbled balls of
cold water and smooth decreasing sizes.
the surface with light pats Now, prepare nineteen
so that you eliminate your (or twenty-one) with just
finger marks. one color (in this case
purple). These should be
all the same size and very small—they will separate the
bigger beads from each other. Make three small green
balls to use at the end as a clasp.

Take a baking tray cover it with tinfoil, and place the Once ready this material can still be touched up.
prepared beads in it. Place the tray in the preheated oven. With a file or some sandpaper, you can refine the edges if
Bake the beads at a temperature bet\/veen 212° F-248° F they have any defects. Remember that abrasive rubbing
for five to ten minutes, according to their size. When will dull the colors.
baking beads for the first time, it is best to first experiment To finish, a coat of transparent varnish will heighten the
with some left over clay so that you get a better idea colors, which will have faded a little while being baked, and
of when to turn off the heat. Too high of a temperature it also will protect the material. There are many brands
(it must never exceed 284° F) can cause flaking, cracking, of varnish on the market, so choose the one that is most
or can alter the color. When the beads are ready, leave suitable for the clays that you used.
them to cool in the oven. Instead of being baked in the
oven, beads can also be boiled in water for five minutes
at a temperature of 212° F.

126
 POLYMER CLAY

Lay your beads in order The three small green

on a pearl tray and beads will be the clasp.
then string them onto Insert the two heads of
a colored leather cord, the cord into one bead
alternating each with and attach the other two
a small purple bead. to the ends with a knot.
Materials

POLYMER CLAY OF TW0

DIFFERENT COLORS

KNIFE

SMALL ROLLING PIN

TOOTHPICKS

PLIERS

OPAQUE TRANSPARENT

VARNISH

SMALL PAINTBRUSH

4 EYE NEEDLES

2 EARRING CLIPS
 POLYMER CLAY

Make a small ball and Pierce it with a toothpick

roll it out with a small Make another smaller
rolling pin into a flat, ball and pierce it with a
circular shape. toothpick Repeat these
steps for the other
earring. Bake in the oven
and let cool. Coat the
earrings with a glossy
varnish to highlight the colors and to protect the clay.

Insert an eye needle into Attach the earring clip.

the previously made
hole and attach a ring
to the end. Repeat this
operation with the
smaller bead. Hook the
rings together.

129
* &!!?■
JEWELRY DECORATED WITH ODDS AND ENDS

132
 JEWELRY DECORATED WITH ODDS AND ENDS

Materials

BRASS NECK WIRE

120 SAFETY PINS OF THREE

DIFFERENT SIZES

Take the brass neck wire and

unscrew the small ball that is the
clasp.
Obtain 120 gold-colored safety
pins of three different sizes:
40 of 3A inch, 40 of 1 inch, and
40 of VA inch.
First attach twenty of the 3A inch
pins, passing the metal wire
through the eye of each pin.
Continue to add the twenty 1 inch
pins, and then add the forty 1 %
inch pins. Return to the medium¬
sized pins, followed by the
smallest pins. Screw the small ball
back on the clasp.
JEWELRY DECORATED WITH ODDS AND ENDS
 JEWELRY DECORATED WITH ODDS AND ENDS

Materials

12 WOODEN TEES (GOLF BALL

pegs)

WOODEN BEADS OF TWO

SHAPES

NYLON THREAD

TWO SHELLS

BEAD REAMER

PINS

HAMMER

SCISSORS

Obtain twelve wooden String another six beads

tees (golf ball pegs) and on each side. Then string
pierce a small hole in the a shell with a small hole.
thin ends. To do this, Finish the necklace with
use a pin and lightly tap nine round wooden
it with a hammer. beads. Knot the thread a
Be careful because the couple of times and heat
wood could split if you it with a flame to seal the
tap too hard. String all the nylon so that the knots
tees on the nylon thread, separating one from the other will not open.
with an oval bead of amaranthine-colored glossy wood.

135
JEWELRY DECORATED WITH ODDS AND ENDS
'* ■ , & *
137
JEWELRY DECORATED WITH ODDS AND ENDS

Materials

23 COLORED PENCILS

BEAD REAMER

16 INCHES OF MUSIC STEEL

WIRE, V4-INCH THICK

ROUND NOSE PLIERS

PENCIL SHARPENER

SMALL SAW

EAR SCREWS

Take twenty-three old

colored pencil stumps (if
you do not have any saw
ordinary pencils at a length
of 4 inches). Sharpen them
until they measure 3 inches
 JEWELRY DECORATED WITH ODDS AND ENDS

With the bead reamer, With the bead reamer,

pierce a hole in each pierce a hole in each
pencil at about V4 inch pencil at about V4 inch
from the end. String the from the end. String the
pencils along the wire, pencils along the wire,
following the color following the color
scheme you prefer. prefer.

mmm

Earrings - With even Barrie - You can make

smaller pencil stumps a very unusual barrette with
you can make some thirteen well-sharpened
am usingfiarrings. Just pencil stumps They can
glue an ear screw to be in line, placed
one side of the pencil, or diagonally or whatever way
else mount three you like. When you have
stumps of different decided on the shape and
lengths on a clip. color scheme, glue them
onto an ordinary barrette.

139
 IWWBir.S. L-

. msum
I oKiiiilliSfc.: ■
'«c»wa BaTBupji’JW ■«.
iilllSfe^agggsgsigg'
iiiRl?|ss^"gs§sn^^ C’S®-1 f *£ apw«HR&SBiSV£*K£8^ i*tgJBVHSgHErai

ll-il * i _ wgggs •:.^:-':il!^gg&sg§?iPP2fesaSfc

*gji ^ • ”SSwW®l»BKSBa|M«g»ggg*y^9B
ifii mam 1S&£BhHS39 lg
mi l!!iS||3lISfel®^l wj «$i *m rm »s &g ^5 gfj £28 §§5 SS5 2SIS? 8? 8SS IC®8 Si 5*1 ®®

tePISwS1
|| SsgBlnHB5gs§Si£ 'If , ,5iw»sra«UKg^gjg«“*g
sn> Si 8! SSsi 5iSHritir - 5BF ->*3
■gg£|i 9k
■mkr
^isssMCsr _; ''JESST^SSStr-r >
vaav t . atwssgr i-C^KSSfei-l •
|i;- >5338- - .fifiar ,f i l£S5?E?S££:
IKi - -»»* .,j«»a[;:’'f.i»|gS«E!
iHawwaiwn rSk- -»«MSS58SS!S«. •
•fe --aans'"

t Jm
^*sgssffis??s&^ jMMwr u ^j»*sjg*c SfSBIs
.jssassasss t * .f4waBKT^^s52SF:
- ^«SS35m.. ^sS99S&^SSSr^:
'^w^^sggggssaffississss^
- £..>5*S5SS|»g»»»'ggggfjs
- " 3S^6S®Slmai»«SiS5»SSS«g
wBaSaMaBgmsggMhrty'r

|#tgIgg^i.eISSIf =pf58g®
gsgasg iH; iiSSSilPli 1«H
■KsqniH i*®BsS3«w
i«MCsa|«|]
it sruV|gi

f^sgiy£E-|MK|S|2g§gggsi

lurriwj

JlliiSllllllllliSllliiiliisfeii
R|HlUMMH|l
!> ^sgsig|H|ll| - Ulli^sss^ c .
iiililliiisIIlllililiiQt
iilsiSBiisKsi

igSSHSstfB! ^aphpBMMcry
’’®SSfiESSfP,B' ^S§&S®«§®3®Bl®KggS?i=;»'
 > issasaisiMrs

- 4alElSisfeSi|^|
!1hI!!I!II? ©
5SmiK*UM§g5j
jg SgSranl^j: * ■.- lllililsllSflilisssilsl
liUlMgl gigsssssssvs - I
^lS!!iiiliii^^3lllillli!II"S"SiIIiII!ll
SS58S5S85SSSHugBran»Sfe^SS6SS33SSS
5sa>;;=g~B3w8fag^gjiiilil^aS^8gg5ssa5 |S53RSSlv
HSv.ntanaiM»i
plfcMMMstrit

®s5-S2iSffi«bss5SBSSPiS^lsls8BasiassaB
. mmmmw &s s® SlSR&mlmBiWmnffl ^gsg 385 9&S; « £2 mmm mmm ^

illllIlIi^MfelllllllSfilllSIlli

jnwni
aglkVsxs - —"22
iMuIuhS. .a
W8K iZ
KlliS
Mtef* jf 1 v •
Sk
,J£]
mmssc*1**** j®®

sssssssssa ISwggiiaBgags

py^iiiiis
^^SgSSgagg
BKgKaaaasssSS
ppasii!!!!!
; ’Wiasl

(pass II
mteairflwafaiaiMa

wEmSmwi^' «**» - JfanS3Si

sgs||»ll|5 jgsliss;
.^isss
8stfSfi*ig»??«* fiSSSSSs!
-d! iSlISliSsS®* ioas
iSSSSaSSSSSilasLes^S
[£SSaSg®S£gSgilSii»S»i!

ISIIiiiiilP*
Ssiliilil
JEWELRY DECORATED WITH ODDS AND ENDS

Materials

24 INCHES OF A

MULTI-COLORED ELECTRICAL

RIBBON

SCISSORS

2 SMALL GOLD-COLORED

JUMP RINGS

LOBSTER CLAW CLASP

BEAD REAMER

ROUND AND FLAT NOSE

PLIERS

Necklace - Cut the ends of

the electrical ribbon
diagonally and make a hole
with the bead reamer on
one end. Insert a jump ring.

142
 JEWELRY DECORATED WITH ODDS AND ENDS

Make a row of hypen Place a lobster claw clasp at the end.

V- shaped folds all

along the ribbon. Try to Earrings - These are made by using the same technique
give this a round shape. as before. You will need two strips of ribbon that are
The ribbon’s copper core 21/2-inches long. Cut diagonally at the ends. Pierce one
will hold the folds in end and attach the earring clasp.
shape.

ANOTHER IDEA - Even

small condensers can
be used to make
ornaments. If joined
together they can make
earrings; if attached
to steel wire they can
be charms. If placed
side-by-side, they can
be glued to a barrette.

143
,,,

“"*»-*«*

"
mMmm

'
JEWELRY DECORATED WITH ODDS AND ENDS

Materials

8 CRYSTALS FROM A

CHANDELIER

16 INCHES OF MUSIC STEEL

NECK WIRE, V4-INCH THICK

RNE STEEL WIRE

ROUND NOSE PLIERS

GLASS BEADS

CRYSTAL PENDANT

---;_:_—- ——:____

Necklace - Lie the neck String a small crystal,

wire, the eight crystals, then a bead, then a
the glass beads, and the bigger crystal, and so on
pendant on your until you reach hallway,
workspace. where the pendant will
With the fine steel wire, be inserted. Repeat this
make small hooks, which sequence, stringing from
will be used to attach the the opposite side of the
crystals to the neck wire. necklace.

146
 1TH ODDS AND ENDS

msm

y •
:
§RMr'>\'v'-v>h-yA

Earrings - Take two

crystals, make a hook,
,
and insert a small
jump ring and ear A
screw. jM
 ■

...... J

ia

f ajp

.-
w w
4 A Cl
148
 Here is a fine array of
original ornaments created
with pasta pieces of
various shapes and colors.
Some twine or metal wire
could be used to string
them. It is fun to spice
up the necklace with
colored beads, seeds, or
even metal studs.
JEWELRY DECORATED WITH ODDS AND ENDS

Materials

COLORED PACTA OF VARIOUS

SHAPES

COLORED COTTON CORD

ADHESIVE TAPE

SCISSORS

Cut a two-colored cotton

cord to a length of 24
inches. Wrap one end with
the adhesive tape.
 JEWELRY DECORATED WITH ODDS AND ENDS

String the short pieces Take another 20-inch cord

of pierced colored pasta, and string on the pasta for
alternating the various about 12 inches.
shapes, for 16 inches.

Join the two rows with

a knot on each side.
Insert a piece of pasta
on one side and make
a loop on the other.
<^0 O',
1®* ■
I* j

&m
£ MM *
JEWELRY DECORATED WITH ODDS AND ENDS

154
 JEWELRY DECORATED WITH ODDS AND ENDS

Materials

13 BUTTONS

BLACK WAX TWINE

NEEDLE

LOBSTER CLAW CD\SP

CRIMP BEAD

ROUND AND FLAT NOSE

PLIERS

SCISSORS

GLUE

Attach a silver-colored String thirteen buttons,

crimp bead and lobster making sure that each
claw clasp to one end of one slightly overlaps the
the twine. next (make a knot after
inserting each button).
Attach another silver-
colored crimp bead and
a jump ring to finish and
fasten the necklace.

155
JEWELRY DECORATED WITH ODDS AND ENDS

Pins - Obtain a 5-inch pin,

complete with safety cap.
Take off the cap and insert
a gold-colored metal bead.
Attach it with a little bit of
glue. Sew on a large button
with a PA-inch diameter.
Attach the seam with glue.
Insert another two metal
beads of different shapes
and attach them with a
drop of glue. Fasten the
safety cap back on again.

156
 JEWELRY DECORATED WITH ODDS AND ENDS

Brooches, Rings, and

Barrettes
Two different techniques
can be used to create
these ornaments. The first
consists of gluing the
buttons onto the metal
base. The second uses a
strong thread, possibly
colored, to sew the buttons
on the clips or on rubber
tubing. It is best to
finish by gluing the
ends of the thread
to the base.

157
mSIm
: : ‘
 JEWELRY DECORATED WITH ODDS AND ENDS

Materials

40 COLORED CANDIES
NYLON THREAD
NEEDLE
BEAD REAMER
SPRING RING CLASP
OPAQUE TRANSPARENT
VARNISH
SMALL PAINTBRUSH
SCISSORS
ROUND AND FQ\T NOSE
PLIERS

Barrette - With four

candies shaped like
squares, you can easily
make an amusing
barrette. Finish with
transparent varnish.

Choose about forty String ail the sweets,

licorice candies. Make a varying the colors and
hole in each with the shapes. Attach a jump
bead reamer and join ring and fasten the
the nylon thread to a spring ring clasp. With
clasp with knots. a small, flat paintbrush,
spread a coat of
transparent varnish to
protect the sweets and
particularly to prevent anyone from “tasting” one.

159
A
Africa, 6 lace, 17 nts, 16
The Americas, 10 "lapel pins, 19 -mache
animals, 12 leather cord, 17 barrette, 46-47
lengths, for projects, 22 making, 34-37
B necklaces, 38-41, 44-45, 48-53
barrettes, 19 ring, 46
bead reamer, 16 ;ed clay necklace, 124-127 pasta, 148-151
bead stringing, see stringing of beads pearls, 31
bead tray, making, 26 pendant necklace, 84-89
beads, 12 pinecone jewelry
brass earrings, 62
earrings, 93-94 necklace, 60-62
necklace, 90-92 wi pliers, 16
brightly colored necklace, 104-106 “matinee” length, 22 polymer clay, 123
brooches, 19 metals, use of earrings, 128-129
button jewelry, 152-157 brass earrings, 93-94 marbled necklace, 124-127
brass necklace, 90-92 “princess” length, 22
pendant necklace, 84-89
candy jewelry, 158-159
mosaic necklace, 78-81
choker length, 22 R
clasps, 18 ribbon, 17
colored pencil jewelry, 136-139
N rings, 19
natural materials, jewelry from, 58-65
colored tubing jewelry, 108-110 “rope” length, 22
beans, 65
cord rosaries, 13
chili peppers, 63
caps, 18 rubber, jewelry made from
cones, 60-62, 64
jewelry from, 116-119 brightly colored necklace, 104-106
dried fruit, 63, 65, 74-77
types, 17 colored tubing, 108-110
mosaic necklace, 78-81
crimp beads, 18 earrings, 100-101
nuts, 65, 74-77
crystal jewelry, 144-147 necklace, 98-99,101
orange peels and almonds, 74-77
spring coil necklace, 102-103
seeds/pods, 63-65
transparent tubing, 107
earrings shells, 68-73
brass, 94 neck wire, 18, 22
colored tubing, 108-110 necklace
cord, 116-119 brass, 90-92 safety pins, 132-133
findings for, 19 brightly colored, 104-106 scissors, 16
polymer clay, 128-129 candy, 158-159 screw clasp, and gold wire, 30
rubber, 100-101 colored tubing, 108-110 sea glass mosaic necklace, 78-81
electrical materials, jewelry from, 140-143 cord, 116-119 shells
with felt strips, 112-115 necklace, 68-73
F marbled clay, 124-127 with wooden tees, 134-135
files, 16 orange peels and almonds, 74-77 spacer bars, 18
findings, 18-19 papier-mache, 38-41 spring coil necklace, 102-103
fruit, dried, orange peels and almonds pendant, 84-89 stringing of beads, 24
necklace, 74-77 rubber, 98-99, 101 bead tray for, 26
shell, 68-73 preparation for, 27
G spring coil, 102-103 technique, 28-29
glues, 16 tinfoil, 54-57
gold wire, and screw clasp, 30
golf tees and shells, 134-135
needles, 16 T
nuts, 65, 74-77 terracotta, 10
H threads, 17
hat pins, 19 o tinfoil necklace, 54-57
odds and ends jewelry designs tools, 16
buttons, 152-157
India, 8 candy, 158-159
colored pencils, 136-139 V
crystal, 144-147 varnishes, 16
jewelry decorations electrical materials, 140-143
cord, 116-119 pasta, 148-151 w
. necklace with felt strips, 112-115 safety pins, 132-133 wire cutters, 16
from odds and ends (See odds and wooden tees and shells, 134-135 wires, 17
ends jewelry designs) “opera” length, 22 wooden tees and shells, 134-135
CRAFTS/JEWELRY $16.95
Can. $25.95

9 781402 701245