SPRING 1. A squared and ground ends spring has a pitch of 20 mm, wire diameter of 12.5 mm. If there are 12 actual number of coils the deflection when spring is compressed to its solid length. A.78mm = B, 75mm —C. 77mm _——, 79mm. 2. A spring with plain ends has 15 active coils diameter of 6 mm and pitch of 10 mm. If spring rate is 100 KNim, determine the solid force, A. 4 KN B, 5KN C. 6KN D. 7KN 3. A spring rate has a spring rate of 30 KNim. If wire diameter is 10mm with a mean diameter of 70 mm, determine the number of active calls. G = 80 GNim2. A. 6.54 B, 7.82 c, 8.42, D, 9.72 4. A spring has a load of 60 Ib. with a spring index of 8. If stress induced is 90,000 psi, determine the wire diameter. ‘A. 0.058 in. B. 0.828 in. C. 0.452in. | D. 0.1157 in, 5. Its found that a load of 60 Ib. an extension coll spring deflects 8.5 in. What load deflect the spring 2.5 in? A 10641. B. 12.48). ©. 1348. OD. 14.70 1b 6. A spring sustain 200 fb of energy with deflection of 3 in, Assume that the main coil diameter is 7 times the wire diameter and allowable stress of 100,000 psi, determine the wire diameter. A0416in. B.0321in. C. 0.568in. D. 0.672in 7. Aweight of 100 Ibs. strikes a col spring from a height of 18 inches and deflects the spring of 6 inches. Find the average force acting on the spring. A. 600lb. 8. 700 lb. C. 80016. —_—D. 900 Ib 8, Ifitis determined experimentally that a load of 20 kg applied to an extension coil spring will provide a deflection of 200 mm. What load wil deflect the spring 60 mm. A 4kg B. 5kg ©. 6kg D. 7 kg 9, Three extension coll spring are hooked in series and supports a weight of 70 kg. One spring has a spring rate of 0.209 kgimm. and the other two have spring rates of 0.643 kg/mm. Find the deflection, ‘A. 346,71 mm B, 389,30 mm C, 426.71 mm D, $52.66 mm 10. Four compression coil spring in parallel support a load of 360 kg. Each spring has a gradient of 0.717 kgimm, A, 125,52mm 8, 132,52mm ©, 138,52mm D, 145.52 mm 11. A spring has a diameter of 25 mm and 12 active coils. Ifa load of a 10 KN is applied it deflects 75 mm. Determine the mean diameter of the spring G = 80 GNim? A. 20mm —_B, 134,65mm C., 150.34 mm D, 40mm 42. Acoil spring isto have a mean diameter of 50 mm and is to suppor a load of 1000 N. The allowable working stress is 415 Mpa and the modulus of elasticity in shear is 80 Gpa. Find the wire diameter of the springinmm. A. 7.195mm B. 5.719mm C. 6.197 mm D. 1.573 mm 18. All four compression coil spring support one load of 400 kg. All four springs are arranged in parallel and rated same at 0.703 kg/mm, Compute the deflection in mm. ‘A 564 B.1457C. 171 D. 141 44. A force of 1.1 KN is acting on a 7.5 active coils with wire diameter of 13 mm. The outside diameter of coi 117 mm and G = 80 GNim?, Determine the deflection. A.276mm B. 298mm C. 325mm D. 346mm 415. A spring with plain ends has 15 active colls diameter of 6 mm and pitch of 10 mm. if spring rate is 100 KNim, determine the solid force. A. 4 KN B.5KN C.6KN OD. 7KN 46. Compute deflection of a 16 coils helical spring having a load of 120 kg. The modulus of elasticity in shear of spring is 100 Gpa, outside diameter of 10 cm and with 10 mm wire diameter. The spring is squared and (ground ends. ‘A. 96.12mm B. 90.43mm C. 102.34mm D. 108.45 mm 17, Find the Wah! factor of the spring having an inside diameter of 10 inches and wire diameter of 0.75 in. A. 1.056 B. 0.374 C. 1.863 D. 1.099 18. Ahigh alloy spring having squared and ground ends and has a total of 16 coils and modulus of elasticity in shear of 85 Gpa. Compute the Wahl factor. The spring outside diameter is 9.66 om and wire diameter is 0.65 cm. A. 1.056 B. 1.10 c. 1.185 D. 1.2 19, A coiled spring with 5 cm of outside diameter is required to work under the load of 190 N with square and ground end. The wire diameter is 5 mm, the spring is to have 6 active coils. The modulus of rigidity is 809 Gpa and the mean radius is to be 23 mm, with 7 mm pitch of the spring. A.65cols B, 7.5coils C, &5coils _D, 9.5 coils 20. Ahelical spring having squared and ground ends has a total of 18 coils and its material has modulus of elasticity in shear of 78,910 Gpa. If the spring has an outside diameter of 10.42 cm and a wire diameter of 0.625 cm, compute the deffection in the spring due to a load of 50 kgs. ‘A. 302mm —B. 490mm —C. 400mm —D. 322mm. 21. Compute the maximum deflection of a 20 coils helical spring having a load of 75 kgs. The spring is a square/ground ends with modulus of elasticity in shear of 79.84 Gpa outside diameter of 101.6 mm and wirediameter of 9525mm. A. 140.7 mm B. 112.7mm C. 18.17mm D. 126.7 mm 22, The smaller of two concentric helical springs is made of 22 mm diameter steel spring and has an outside diameter of 100 mm with 10 active coils. The outer spring is made of 32 mm steel spring and has an outside diameter of 250 mm with 8 active coils. Before load is applied, the outer spring is 25 mm longer than the inner spring. Ifthe load is 80 KN is applied to this rest of springs. Find the rate of each spring. ‘A. 507.5 KNim, 143.6 KN/m C. 493.8 KNim, 126.5 KN/m B. 731.5 KNim, 212.5 KNim D. 976.1 KNim, 318.8 KNim 23, Calculate the wire diameter of a steel spring that could support a load of 50 kg. Allowable working stress is 427 x 10® Nim, the spring mean diameter is to be 44.45 mm and G = 79.3 Gpa A, 0.2108 in B, 0,3028 in C, 0.3924 in D, 0.6931 in 24. Asemielliptic laminated spring is made of No. 10 BWG steel 2 inches wide. The length between support is 26 “A inches and the band is 2 % in wide, The spring has two full-length and five graduated leaves, A central load of 350 Ib is carried. Assume that the distance from bolt to end of band is 1/6 of the band width and plate thickness is 0.134 inch, Le=L /2-(bw-1/3 bw)/2—~ effective length Where: bw—band width; L—length bet support ‘A. Determine the maximum stress if each set of leaves for an initial condition of no stress in the leaves. Ans. S1 = 68,000 psi, Sp = 45,300 psi B. Determine the maximum stress if initial stress is provided to cause equal stresses when loaded ‘Ans. 51,900 psi C. Determine the deflection in Part A Ans. 1.74 inches