S1210 EMI Pre-compliance Software

Data Sheet
S1210 EMI Pre-compliance Software
DSA Series Spectrum Analyzer
EMC Laboratory

Antenna

Near Field Probe S1210 EMI

DSA Spectrum Analyzer Pre-compliance Software

LISN

RIGOL TECHNOLOGIES, INC.

Product Overview
S1210 EMI Pre-compliance Software is a PC application software developed by RIGOL for DSA1000A, DSA1000, DSA800 and
DSA800E (with the EMI-DSA800 option) with the EMI function. This software is designed on the basis of the standard drive VISA and
you can realize the communication between the software and instrument via USB-TMC or LAN interface to control the instrument.

You can perform conduction and radiation tests using S1210 EMI Pre-compliance Software and RIGOL DSA series spectrum
analyzer. You can measure the interference voltage on the power cable using the linear impedance stability network (LISN) and
perform amplitude correction on the results by loading the correction factor (preamplifier, attenuator, antenna, cable, or correction
array) automatically in the radiation test.

This software also provides various functions to facilitate your measurements. You can set various parameters (such as the frequency
range, resolution bandwidth, and scan time) via the scan table. After performing a scan, the results can be displayed in log or linear
format. You can search for signal peak value and view the results displayed in the peak table. Besides, you can mark and delete the
undesired signal, as well as easily recognize signals that do not pass the standard limit line. The software also supports the marker
table. In the marker table, you can double click the table to add a marker to mark any frequency point that interests you.

Product Features
● Introduce the workspace concept; manage multiple measurements
● Support the demo mode for you to enjoy a great user experience with the software, without connecting the instrument or
obtaining a license
● Provide data manager function for you to edit required files for the software
● Provide amplitude correction function for you to preview the correction setting and get the calibration results in a timely manner
● Provide pre san and final scan, support three trace display modes: "Clear/Write", "Repeat Clear/Write", and "Repeat Max Hold"
● Provide the limit line for you to quickly judge the measurement results
● Support segment scanning and editing for the table to accelerate the measurement speed
● Frequency axis supports the scale display in linear or log format
● Amplitude axis supports multiple amplitude units
● Provide comprehensive peak search settings for you to search for the desired peaks that meet with your search conditions
● Support importing and exporting the peak table
● Support editing the marker table, marking any frequency point that interest you
● Support the reference trace, easy for you to compare the measurement results
● Support easy operation on the spectrum graph, convenient for you to analyze the results
● Provide report generation function

Product Functions
To quickly perform the EMI test with the software, we recommend you to follow the measurement procedures as shown
in the figure below.

Limit Line File

Correction File Segment Scan Table
（*.lim）
（*.pac/*.atc/*.anc/ （*.seg）
Import
*.cac/*.lsc/*.crs）
Import Export
Import Limit Lines Setups

Correction Scan Config Pre Scan Setups Segment Graph Config

Config Config

Final Scan Setups

Report Final Scan Peak Search Pre Scan

Import Export Import Export

Peak Table
（*.pkl）
Correction Config
Load and select the correction file; compensate the gain or loss of the external devices (such as the antenna and cable). You can view the
correction data in the Correction Preview.

Scan Config
Load and select the limit line file, set the limit lines, configure parameters for pre scan and final scan.

Segment Config
Set the parameters for the segment scan separately, and view the segment scan data sheet in the segment table. Besides, you can export the
segment scan table currently edited, or import the edited segment scan table.

Graph Config
Set the graph axis and the graph title.

Pre Scan
Perform segment pre scan based on the segment scan setting to improve the measurement speed of the software. After the scan is completed,
you can preview the measurement results in the spectrum graph, and compare the results with the set limit line value.

Peak Search
Perform the peak search operation. The software filters and marks the peak table according to the user-defined conditions. You can edit the
peak table; add or delete frequency points; export/import the peak table.

Final Scan
The final scan provides a more accurate scan on the critical interference signals to ensure the measurement accuracy of the software.

Report
Fill in the actual parameter values based on the current measurement environment, and add remarks if necessary. You can also print the
activated measurement report for further progressing of the measurement values.

Specifications

S1210 EMI Pre-compliance Software

DSA705 100 kHz to 500 MHz
DSA710 100 kHz to 1 GHz
DSA815/DSA815-TG 9 kHz to 1.5 GHz
DSA832/DSA832-TG 9 kHz to 3.2 GHz
Frequency range
DSA875/DSA875-TG 9 kHz to 7.5 GHz
DSA832E/DSA832E-TG 9 kHz to 3.2 GHz
DSA1030/DSA1030-TG 9 kHz to 3 GHz
DSA1030A/DSA1030A-TG 9 kHz to 3 GHz
DSA705
DSA710
DSA815/DSA815-TG
0 dB to 30 dB
DSA832/DSA832-TG
Attenuation
DSA875/DSA875-TG
DSA832E/DSA832E-TG
DSA1030/ DSA1030-TG
0 dB to 50 dB
DSA1030A/ DSA1030A-TG
DSA705
DSA710 100 Hz, 300 Hz, 1 kHz, 3 kHz, 10 kHz, 30 kHz, 100 kHz,
DSA815/DSA815-TG 300 kHz, 1 MHz
Pre scan resolution bandwidth/final scan DSA1030/DSA1030-TG
resolution bandwidth (-3 dB) DSA832/ DSA832-TG
DSA875/ DSA875-TG 10 Hz, 30 Hz, 100 Hz, 300 Hz, 1 kHz, 3 kHz, 10 kHz,
DSA832E/DSA832E-TG 30 kHz, 100 kHz, 300 kHz, 1 MHz
DSA1030A/ DSA1030A-TG
DSA705
DSA710
DSA815/DSA815-TG
Pre scan resolution bandwidth/final scan DSA832/DSA832-TG
200 Hz, 9 kHz, 120 kHz
resolution bandwidth (-6 dB) DSA875/DSA875-TG
DSA832E/DSA832E-TG
DSA1030/DSA1030-TG
DSA1030A/DSA1030A-TG
 DSA705
DSA710 0.0167 ms to 2500 ms
DSA815/ DSA815-TG
DSA832/ DSA832-TG
Measurement time 0.0167 ms to 5333.3 ms
DSA832E/DSA832E-TG
DSA875/ DSA875-TG 0.0167 ms to 12500 ms
DSA1030/ DSA1030-TG
0.0167 ms to 5000 ms
DSA1030A/ DSA1030A-TG

Ordering Information

Description Order Number

EMI PC software S1210 EMI Pre-compliance Software
spectrum analyzer, 100 kHz to 500 MHz (with preamplifier) DSA705
spectrum analyzer, 100 kHz to 1 GHz (with preamplifier) DSA710
spectrum analyzer, 9 kHz to 1.5 GHz (with preamplifier) DSA815
spectrum analyzer, 9 kHz to 3.2 GHz DSA832
spectrum analyzer, 9 kHz to 7.5 GHz DSA875
spectrum analyzer, 9 kHz to 3.2 GHz DSA832E
spectrum analyzer, 9 kHz to 1.5 GHz (with preamplifier, with tracking generator, factory
DSA815-TG
installed)
Model
spectrum analyzer, 9 kHz to 3.2 GHz (with tracking generator, factory installed) DSA832-TG
spectrum analyzer, 9 kHz to 7.5 GHz (with tracking generator, factory installed) DSA875-TG
spectrum analyzer, 9 kHz to 3.2 GHz (with tracking generator, factory installed) DSA832E-TG
spectrum analyzer, 9 kHz to 3 GHz (with preamplifier) DSA1030A
spectrum analyzer, 9 kHz to 3 GHz DSA1030
spectrum analyzer, 9 kHz to 3 GHz (with preamplifier, with tracking generator, factory
DSA1030A-TG
installed)
spectrum analyzer, 9 kHz to 3 GHz (with tracking generator, factory installed) DSA1030-TG
Option EMI filter &quasi-peak detector EMI-DSA800

HEADQUARTER EUROPE NORTH AMERICA JAPAN

RIGOL TECHNOLOGIES, INC. RIGOL TECHNOLOGIES GmbH RIGOL TECHNOLOGIES, RIGOL TECHNOLOGIES JAPAN G.K.
No.156,Cai He Village, Lindbergh str. 4 USA INC. Tonematsu Bldg. 5F, 2-33-8 Nihonbashi-
Sha He Town, 82178 Puchheim 10200 SW Allen Blvd, Suite C Ningyocho, Chuo-ku,
Chang Ping District, Beijing, Germany Beaverton, OR 97005, USA Tokyo 103-0013
102206 P.R.China Tel: 0049- 89/89418950 Toll free: 877-4-RIGOL-1 Japan
Tel:+86-10-80706688 Email: [email protected] Office: (440) 232-4488 Tel: +81-3-6264-9251
Fax:+86-10-80705070 Fax: (216)-754-8107 Fax: +81-3-6264-9252
Electronic Measurement Email: [email protected] Email: [email protected]
Instrument service and support
email:[email protected]
Chemical Analysis Instrument
service and support email:service.
[email protected]

RIGOL® is the registered trademark of RIGOL Technologies, Inc. Product information in

this document subject to update without notice. For the latest information about RIGOL's
products, applications and services, please contact local RIGOL office or access RIGOL
official website: www.rigol.com

May 2016