Scribd
Upload
175 views

CSIT 332 Lab Advance Computer Network

The document contains an assignment for a computer networking lab course. The assignment asks the student to: 1. Configure various common network topologies in Cisco Packet Tracer and provide descriptions and screenshots of each configuration. This includes bus, star, mesh, ring, hybrid and tree topologies. 2. Configure three routers in Cisco Packet Tracer to successfully pass messages between them. The student must provide the configuration details and screenshots. 3. The deadline for submission is July 28th, 2020.

Uploaded by

Designer Emil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
175 views

CSIT 332 Lab Advance Computer Network

The document contains an assignment for a computer networking lab course. The assignment asks the student to: 1. Configure various common network topologies in Cisco Packet Tracer and provide descriptions and screenshots of each configuration. This includes bus, star, mesh, ring, hybrid and tree topologies. 2. Configure three routers in Cisco Packet Tracer to successfully pass messages between them. The student must provide the configuration details and screenshots. 3. The deadline for submission is July 28th, 2020.

Uploaded by

Designer Emil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 9

ROYAL UNIVERSITY OF DHAKA

Summer Exam
Name: Md. Abdul Khaled saifullah
Sub: CSE (DAY)
Student Id: 2001110437
Batch No: 49.
Mobile. No- 01700855338
Course Teacher’s Name: Md. Nur-E-Arefin
Program: B.Sc. (HON’S) in CSE/CSIT
ROYAL UNIVERSITY OF DHAKA
Program: B.Sc. (HON’S) in CSE/CSIT

Course Code & Title: CSIT 332: Advance Computer Network Lab (Day)
Course Teacher: Md. Nur-E-Arefin (01675025549, [email protected])

Assignment
Assignment Topic:

a) Configure Point to point topology, bus topology, ring topology, star topology,
tree topology, mesh topology and hybrid topology in Cisco Packet Tracer software.
Write the point to point description how you configured and also give screenshot
of your configuration.
b) Configure three routers in cisco packet tracer software which successfully pass
messages. Write the point to point description how you configured and also give
screenshot of your configuration.

Submission deadline: 28th July, 2020.


Configure Point to point topology, bus topology, ring topology, star topology, tree
topology, mesh topology and hybrid topology in Cisco Packet Tracer software.
Write the point to point description how you configured and also give screenshot
of your configuration.

1 Bus Topology

In local area network, it is a single network cable runs in the building or campus and all nodes are
connected along with this communication line with two endpoints called the bus or backbone. In
other words, it is a multipoint data communication circuit that is easily control data flow between
the computers because this configuration allows all stations to receive every transmission over the
network

For bus topology we build network using three generic pc which are serially connected with three
switches using copper straight through cable and switches are interconnected using copper cross
over cable.
2 Star Topology
In star topology, all the cables run from the computers to a central location where they are all
connected by a device called a hub. It is a concentrated network, where the end points are directly
reachable from a central location when network is expanded. [4]. Ethernet 10 base T is a popular
network based on the star topology. For star topology we build network using five generic pc
which are centrally connected to single switch 2950-24 using copper straight through cable.
3 Mesh Topology

In mesh topology every device has a dedicated point to point link to every other device. The
term dedicated stand for link carries traffic only between two devices it connects. It is a
well-connected topology; in this every node has a connection to every other node in the
network. The cable requirements are high and it can include multiple topologies. Failure in
one of the computers does not cause the network to break down, as they have alternative
paths to other computers star topology, all the cables run from the computers to a central
location

For mesh topology we build network using five 1841 router. To design four serial port
router click on router->turn off->drag the WIC2T module two times.->power on To
establish connection between router to router using DCE cables.
CONFIGURATION OF COMPONENT

1 Bus topology: To configure the IP address of an interface, we configure all PC one by one click on pc, open
DESKTOP window, fill IP Address, Fill subnet mask and default gateway. After that, simulate the network using
simulation

2 Star topology: To configure the IP address of an interface, we configure all PC one by one click on pc, open
DESKTOP window, fill IP Address, Fill subnet mask and default gateway. After that, simulate the network using
simulation

3 Mesh topology: To configure the IP address of an interface, we configure all routers one by one. Click on
router, open config window, fill IP Address of serial port which are connected to router, Fill subnet mask, set clock
rate and port status is ON. After that, simulate the network using simulation mode

Router configuration of mesh topology

Ring topology
Hybrid topology

Tre topology
Configure three routers in cisco packet tracer software which successfully pass
messages. Write the point to point description how you configured and also give
screenshot of your configuration.

First Step I Have to design in Packet tracer with 3 router, 3 switch, and 6 PC

1. Router 0

Fasethernet 0/0 : 192.168.1.1 /24

Serial 2/0 : 192.168.253.1 /24

2. Router 1

Fasethernet 0/0 : 192.168.2.1 /24

Serial 2/0 : 192.168.253.2 /24

Serial 2/0 : 192.168.254.1 /24

3. Router 2

Fasethernet 0/0 : 192.168.3.1 /24

Serial 2/0 : 192.168.254.2 /24

 
 

      

   

You might also like