Scribd
Upload
164 views1 page

4AD158TI/4AD222TI Marine Generator Engine

The document provides specifications for two marine generator engines from Doosan Infracore: the 4AD158TI and the 4AD222TI. Both are 4-cycle, V-type diesel engines that are water-cooled with a turbocharger and intercooler. The 4AD158TI produces 442PS at 1,500rpm (50Hz) and the more powerful 4AD222TI produces 667PS at 1,500rpm. The document lists detailed technical specifications for each engine, including displacement, cylinder configuration, fuel consumption rates, lubrication requirements, dimensions, weight, and other parameters.

Uploaded by

Elton Flores
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
164 views1 page

4AD158TI/4AD222TI Marine Generator Engine

The document provides specifications for two marine generator engines from Doosan Infracore: the 4AD158TI and the 4AD222TI. Both are 4-cycle, V-type diesel engines that are water-cooled with a turbocharger and intercooler. The 4AD158TI produces 442PS at 1,500rpm (50Hz) and the more powerful 4AD222TI produces 667PS at 1,500rpm. The document lists detailed technical specifications for each engine, including displacement, cylinder configuration, fuel consumption rates, lubrication requirements, dimensions, weight, and other parameters.

Uploaded by

Elton Flores
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

4AD158TI/4AD222TI

MARINE GENERATOR ENGINE

Production tolerance : ± 3%
Model
Spec.
Units 4AD158TI 4AD222TI
4 cycle, V-type, direct- injection, water cooled
Engine type
with wet- turbo charger & inter-cooler

442(325)/1,500 667(491) /1,500


50 Hz
Rating output PS(kW) (4AD158TIF) (4AD222TIF)
(B.H.P) / rpm 530(390)/1,800 800(588) /1,800
60 Hz
(4AD158TIS) (4AD222TIS)

Displacement cc 14,618 21,927

Cyl. No. – bore(φ) x stroke mm 8 - Φ128 x 142 12 - Φ128 x 142

Valve clearance at cold mm 0.4 / 0.5

Low idling rpm rpm 800 ± 50


No load max. rpm
rpm 1,500 / 1,800
(50Hz / 60Hz)
Mean effective press. (Initial ) ㎏/㎠ 18.1 / 18.1 18.3 / 18.2
Mean piston speed
m/sec. 7.1 / 8.52
(50Hz / 60Hz)
Compression ratio 14.3 : 1

Governor type of inj. pump Electric Governor

g/PS.h 165 / 171.5 159 / 169


Fuel consumption
liter/h 88 / 110 128 / 163
CCnR2 9° ± 1° 9° ± 1°
Injection 50 Hz
EIAPP 15° ± 1° 15° ± 1°
timing deg.
CCnR2 11° ± 1° 11° ± 1°
(B.T.D.C) 60 Hz
EIAPP 15° ± 1° 15° ± 1°
Starting system Electric Starting by starter motor

Starter motor capacity V- kW 24 V – 6.6

Alternator capacity V- A 24 V – 50

Battery V- Ah 24V – 200

Cooling system Indirect cooling by sea water with heat exchanger

Cooling water capacity lit 94 / 83 103 / 92

Fresh water pump type Centrifugal type driven by V - belt

Sea water pump type Centrifugal type driven by V - belt


Pan Max : 31, Min : 25 Max : 40, Min : 33
Lub. Oil lit
capacity ( Engine total : 35) ( Engine total : 49)
(Engine)
Pressure ㎏/㎠ Full : 3.5 , Idle: 1.2

Revolution of Crankshaft Counter clockwise viewed from flywheel side

Engine size (L x W x H) mm 1,205 x 1,237 x 1,117 1,521 x 1,243 x 1,236

Engine dry weight kg 1540 1920

※ Specifications are subject to change without prior notice.

DOOSAN Infracore Printed in December 2008 PS-SBM0785-E2F

You might also like