Scribd
Upload
46 views3 pages

Silicon Schottky Diode BAT 66-05: Preliminary Data

This document provides preliminary data on the BAT 66-05, a low-power Schottky rectifier diode for purposes such as low-loss, fast-recovery rectification, meter protection, bias isolation, and clamping. Key specifications include a maximum reverse voltage of 40V, forward current of 2A, and thermal resistance of ≤160K/W. Electrical characteristics are provided for forward voltage, reverse current, and diode capacitance over temperature ranges and current levels.

Uploaded by

Nelson antonio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
46 views3 pages

Silicon Schottky Diode BAT 66-05: Preliminary Data

This document provides preliminary data on the BAT 66-05, a low-power Schottky rectifier diode for purposes such as low-loss, fast-recovery rectification, meter protection, bias isolation, and clamping. Key specifications include a maximum reverse voltage of 40V, forward current of 2A, and thermal resistance of ≤160K/W. Electrical characteristics are provided for forward voltage, reverse current, and diode capacitance over temperature ranges and current levels.

Uploaded by

Nelson antonio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Silicon Schottky Diode BAT 66-05

Preliminary Data

● Low-power Schottky rectifier diode


● For low-loss, fast-recovery rectification, meter
protection, bias isolation and clamping purposes

Type Marking Ordering Code Pin Configuration Package1)


(tape and reel)
BAT 66-05 BAT 66-05 Q62702-A988 SOT-223

Maximum Ratings
Parameter Symbol Values Unit
Reverse voltage VR 40 V
Forward current IF 2 A
Average forward current, 50 Hz IFAV 1
Surge forward current, t ≤ 10 ms IFSM 10
Total power dissipation, TS ≤ 126 ˚C Ptot 1.2 W
Junction temperature Tj 150 ˚C
Storage temperature range Tstg – 55 … + 150

Thermal Resistance
Junction - ambient2) Rth JA ≤ 160 K/W
Junction - soldering point Rth JS ≤ 20

1) For detailed information see chapter Package Outlines.


2) Package mounted on epoxy pcb 40 mm × 40 mm × 1.5 mm/6 cm2 Cu.

Semiconductor Group 1 5.91


BAT 66-05

Electrical Characteristics
at TA = 25 ˚C, unless otherwise specified.
Parameter Symbol Values Unit
min. typ. max.
Reverse current IR
VR = 25 V – – 10 µA
VR = 25 V, TA = 85 ˚C – – 1 mA
Forward voltage VF V
IF = 10 mA – 0.28 0.35
IF = 100 mA – 0.35 –
IF = 1 A – 0.47 0.60
Diode capacitance CT – 30 40 pF
VR = 10 V, f = 1 MHz

Forward current IF = f (VF) Reverse current IR = f (VR)

Semiconductor Group 2
BAT 66-05

Forward current IF = f (TA*; TS)


* Package mounted on epoxy

Semiconductor Group 3

You might also like