Scribd
Upload
122 views2 pages

Sub Code & Name: Ec8691-Micro Processor and Micro Controller Portion Covered Units: 1 2 3 4 5 Max Marks: 100 PART-A (10X2 20)

1. The document is a syllabus for the course "Microprocessor and Microcontroller" covering units 1 through 5. It includes 20 2-mark questions for Part A and 5 16-mark questions for Part B covering topics on 8086 and 8051 microprocessors/microcontrollers like memory organization, interrupts, addressing modes, I/O ports, and interfacing circuits. 2. Students will be assessed on their understanding of microprocessor architecture, programming, and application. Questions cover topics such as interrupt handling, averaging algorithms, maximum mode, I/O controllers, analog-to-digital conversion, timers, stepper motor control, and serial communication. 3. The syllabus is signed off by the

Uploaded by

pradeepa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
122 views2 pages

Sub Code & Name: Ec8691-Micro Processor and Micro Controller Portion Covered Units: 1 2 3 4 5 Max Marks: 100 PART-A (10X2 20)

1. The document is a syllabus for the course "Microprocessor and Microcontroller" covering units 1 through 5. It includes 20 2-mark questions for Part A and 5 16-mark questions for Part B covering topics on 8086 and 8051 microprocessors/microcontrollers like memory organization, interrupts, addressing modes, I/O ports, and interfacing circuits. 2. Students will be assessed on their understanding of microprocessor architecture, programming, and application. Questions cover topics such as interrupt handling, averaging algorithms, maximum mode, I/O controllers, analog-to-digital conversion, timers, stepper motor control, and serial communication. 3. The syllabus is signed off by the

Uploaded by

pradeepa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Sub Code & Name: EC8691-MICRO PROCESSOR AND MICRO CONTROLLER

PORTION COVERED UNITS: 1 2 3 4 5 Max Marks: 100

PART-A [10X2=20]

1. Why is the 8086 memory divided into odd and even banks?

2. Name the hardware interrupts of 8086.

3. Identify the addressing modes involved in the following 8086 instructions: MOVAX, 0005H;
MOV AX,50H [BX] [S1].
4. What information is conveyed when QS1,QS0 bits are 01.
5. State the importance of sample and hold circuit.

Why are the port lines of programmable port devices automatically put in the input mode when
6.
the devices is first powered-up or reset.

7. How is the selection of particular register bank done in 8051?

How does the processor 8051 knows whether on Chip ROM or External program memory is
8.
used?

9. What is the resolution of 10 bit ADC?

10. What are the use of PWM in motor control using micro controller.
PART-B [5X16=80]

1 How the interrupt vector is handled in 8086. (8)


a i
1
Write a program based on 8086 instruction set to compute the average of ‘n’ number of bytes (8)
ii
stored in the memory.
OR
b i Write notes on Maximum mode in 8086. (8)
ii Develop a program to transfer 10 bytes of data from memory location starting from 2000H. (8)

1 Describe the maximum mode Signals, Bus Cycles and maximum mode system (16)
a
2 configuration of 8086 micro processor in detail.
OR
Draw the pin diagram of 8086 CPU and explain the functions of the pins in minimum and (10)
b i
maximum mode of operation of 8086.
ii Describe the circuit suitable for generation of multiple wait states for 8086 CPU module. (6)
1 Explain the 8279 Keyboard /Display controller with neat block diagram. (16)
a
3
OR
b i Explain the function of Programmable Peripheral Interface INTEL 8255. (8)
Draw the block diagram to interface a Analog to Digital Converter with a micro processor and (8)
ii
explain its working.
1 Write an assembly language program for 8051.To send 20 output lines at P2.0vary the duration (8)
a i
4 of pulse using NOP.
ii Write a program based on 8051 instruction set to pack array of unpacked BCD digits. (8)
OR
b i Draw the circuit to interface 8 K RAM with 8051 externally. Explain the circuit. (8)
ii Explain the timer operation in8051 microcontroller with necessary diagrams. (8)
1 Draw the diagram to interface a stepper motor with a 8051 microcontroller and explain also (16)
a
5 write an 8051 ALP to run the stepper motor in both forward and reverse direction with a delay.
OR
b i Explain the interfacing of 4X4 matrix keyboard to the 8051 microcontroller with neat diagram. (8)
ii Write shortly on the various operating modes for serial port of 8051 micro controller. (8)

STAFF IN CHARGE HOD/IT DEAN PRINCIPAL

[G.PRADEEPA, AP/IT]

You might also like