Scribd
Upload
2K views4 pages

LOAD COMBINATIONS (NSCP 2015 - 7th Edition)

The document provides load combinations for ultimate and service limit states according to NSCP 2015 for the design of a warehouse project located in Rodriguez, Rizal. It lists 29 ultimate load combinations involving dead, live, roof live, non-reducible live loads, and effects of wind and earthquake. It also lists 37 service load combinations with lower load factors. Input parameters like soil profile, seismic zone, and structural system are noted.

Uploaded by

Jes Abinal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views4 pages

LOAD COMBINATIONS (NSCP 2015 - 7th Edition)

The document provides load combinations for ultimate and service limit states according to NSCP 2015 for the design of a warehouse project located in Rodriguez, Rizal. It lists 29 ultimate load combinations involving dead, live, roof live, non-reducible live loads, and effects of wind and earthquake. It also lists 37 service load combinations with lower load factors. Input parameters like soil profile, seismic zone, and structural system are noted.

Uploaded by

Jes Abinal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

PROJECT: Warehouse PREPARED BY: JQA

LOCATION: Rodriguez, Rizal DATE: XX/XX/XXXX


CLIENT: Mr. Abinal CHECKED BY: JQA

LOAD COMBINATIONS (NSCP 2015 -7th Edition)

Input Parameters:

Soil Pro ile:

Seismic Zone:

Seismic Zone Factor: Z = 0.40

Occupancy Category:

Importance Factor: I = 1.50

Basic Seismic-Force Resisting System: Special reinforced concrete moment frames

Over Strength Factor: R := 8.50

Seismic Source Type:

Closest Distance to Known Seismic Source: DISTANCE  15km

Near-Source Factors: Na = 1.00

Nv = 1.00

Seismic Coef icients: Ca = 0.44

Cv = 0.64

Redundancy Factor: ρ  1.0

Vertical Earthquake Component: E v = 0.5  Ca  I  D

Earthquake Load: E = ρ  Eh + Ev

Ultimate Load Combinations:


U1 = 1.40  DL

U2 = 1.20  DL + 1.60  LL + 0.50  Lr + 1.60  NRL

U3 = 1.20  DL + 0.50  LL + 1.60  Lr + NRL

U4 = 1.53  DL + 0.50  LL + NRL + QXpe

U5 = 1.53  DL + 0.50  LL + NRL + QXne

U6 = 0.87  DL + 0.50  LL + NRL - 1.00  QXpe

U7 = 0.87  DL + 0.50  LL + NRL - 1.00  QXne


PROJECT: Warehouse PREPARED BY: JQA
LOCATION: Rodriguez, Rizal DATE: XX/XX/XXXX
CLIENT: Mr. Abinal CHECKED BY: JQA

U8 = 1.53  DL + 0.50  LL + NRL + QZ pe

U9 = 1.53  DL + 0.50  LL + NRL + QZ ne

U10 = 0.87  DL + 0.50  LL + NRL - 1.00  QZ pe

U11 = 0.87  DL + 0.50  LL + NRL - 1.00  QZ ne

U12 = 0.57  DL - 1.00  QXpe

U13 = 0.57  DL - 1.00  QXne

U14 = 1.23  DL + QZ pe

U15 = 1.23  DL + QZ ne

U16 = 0.57  DL - 1.00  QZ pe

U17 = 0.57  DL - 1.00  QZ ne

U18 = 1.20  DL + 1.60  Lr + 0.50  WX

U19 = 1.20  DL + 1.60  Lr - 0.50  WX

U20 = 1.20  DL + 1.60  Lr + 0.50  WZ

U21 = 1.20  DL + 1.60  Lr - 0.50  WZ

U22 = 1.20  DL + 0.50  LL + 0.50  Lr + NRL + WX

U23 = 1.20  DL + 0.50  LL + 0.50  Lr + NRL - 1.00  WX

U24 = 1.20  DL + 0.50  LL + 0.50  Lr + NRL + WZ

U25 = 1.20  DL + 0.50  LL + 0.50  Lr + NRL - 1.00  WZ

U26 = 0.90  DL + WX

U27 = 0.90  DL - 1.00  WX

U28 = 0.90  DL + WZ

U29 = 0.90  DL - 1.00  WZ


PROJECT: Warehouse PREPARED BY: JQA
LOCATION: Rodriguez, Rizal DATE: XX/XX/XXXX
CLIENT: Mr. Abinal CHECKED BY: JQA

Service Load Combinations:


S1 = DL + 0.75  LL + 0.75  Lr + 0.75  NRL + 0.536  QXpe

S2 = DL + 0.75  LL + 0.75  Lr + 0.75  NRL + 0.536  QXne

S3 = DL + 0.75  LL + 0.75  Lr + 0.75  NRL - 0.536  QXpe

S4 = DL + 0.75  LL + 0.75  Lr + 0.75  NRL - 0.536  QXne

S5 = DL + 0.75  LL + 0.75  Lr + 0.75  NRL + 0.536  QZ pe

S6 = DL + 0.75  LL + 0.75  Lr + 0.75  NRL + 0.536  QZ ne

S7 = DL + 0.75  LL + 0.75  Lr + 0.75  NRL - 0.536  QZ pe

S8 = DL + 0.75  LL + 0.75  Lr + 0.75  NRL - 0.536  QZ ne

S9 = DL + 0.75  LL + 0.75  Lr + 0.75  NRL + 0.45  WX

S10 = DL + 0.75  LL + 0.75  Lr + 0.75  NRL - 0.45  WX

S11 = DL + 0.75  LL + 0.75  Lr + 0.75  NRL + 0.45  WZ

S12 = DL + 0.75  LL + 0.75  Lr + 0.75  NRL - 0.45  WZ

S13 = 0.6  DL + 0.6  WX

S14 = 0.6  DL - 0.6  WX

S15 = 0.6  DL + 0.6  WZ

S16 = 0.6  DL - 0.6  WZ

S17 = 0.6  DL + 0.714  QXpe

S18 = 0.6  DL + 0.714  QXne

S19 = 0.6  DL - 0.714  QXpe

S20 = 0.6  DL - 0.714  QXne

S21 = 0.6  DL + 0.714  QZ pe

S23 = 0.6  DL - 0.714  QZ pe

S24 = 0.6  DL - 0.714  QZ ne

S25 = DL + LL + Lr + NRL

S26 = DL + LL + NRL + 0.6  WX

S27 = DL + LL + NRL - 0.6  WX


PROJECT: Warehouse PREPARED BY: JQA
LOCATION: Rodriguez, Rizal DATE: XX/XX/XXXX
CLIENT: Mr. Abinal CHECKED BY: JQA

S28 = DL + LL + NRL + 0.6  WZ

S29 = DL + LL + NRL - 0.6  WZ

S30 = DL + LL + NRL + 0.714  QXpe

S31 = DL + LL + NRL + 0.714  QXne

S32 = DL + LL + NRL - 0.714  QXpe

S33 = DL + LL + NRL - 0.714  QXne

S34 = DL + LL + NRL + 0.714  QZ pe

S35 = DL + LL + NRL + 0.714  QZ ne

S36 = DL + LL + NRL - 0.714  QZ pe

S37 = DL + LL + NRL - 0.714  QZ ne

LEGEND
DL - Dead Load
LL - Live Load
NRL - Non Reducible Live Load
Lr - Roof Live Load
W - Wind Load
Q - Earthquake Load
pe- positive eccentricity
ne - negative eccentricity

You might also like