Previews - 2033457 PIP VEFV1100M

TECHNICAL CORRECTION
January 2019
Vessels
PIP VEFV1100M
Vessel/S&T Heat Exchanger Standard Details
(Metric Units)
PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
In an effort to minimize the cost of process industry facilities, this Practice has
been prepared from the technical requirements in the existing standards of major
industrial users, contractors, or standards organizations. By harmonizing these technical
requirements into a single set of Practices, administrative, application, and engineering
costs to both the purchaser and the manufacturer should be reduced. While this Practice
is expected to incorporate the majority of requirements of most users, individual
applications may involve requirements that will be appended to and take precedence
over this Practice. Determinations concerning fitness for purpose and particular matters
or application of the Practice to particular project or engineering situations should not
be made solely on information contained in these materials. The use of trade names
from time to time should not be viewed as an expression of preference but rather
recognized as normal usage in the trade. Other brands having the same specifications
are equally correct and may be substituted for those named. All Practices or guidelines
are intended to be consistent with applicable laws and regulations including OSHA
requirements. To the extent these Practices or guidelines should conflict with OSHA or
other applicable laws or regulations, such laws or regulations must be followed.
Consult an appropriate professional before applying or acting on any material
contained in or suggested by the Practice.
This Practice is subject to revision at any time.
© Process Industry Practices (PIP), Construction Industry Institute, The University of

Texas at Austin, 3925 West Braker Lane (R4500), Austin, Texas 78759. PIP Member
Companies and Subscribers may copy this Practice for their internal use. Changes or
modifications of any kind are not permitted within any PIP Practice without the express
written authorization of PIP. Authorized Users may attach addenda or overlays to clearly
indicate modifications or exceptions to specific sections of PIP Practices. Authorized
Users may provide their clients, suppliers and contractors with copies of the Practice
solely for Authorized Users’ purposes. These purposes include but are not limited to the
procurement process (e.g., as attachments to requests for quotation/ purchase orders or
requests for proposals/contracts) and preparation and issue of design engineering
deliverables for use on a specific project by Authorized User’s client. PIP’s copyright
notices must be clearly indicated and unequivocally incorporated in documents where an
Authorized User desires to provide any third party with copies of the Practice.
PUBLISHING HISTORY
February 2007 Issued October 2017 Technical Revision
January 2009 Editorial Revision January 2019 Technical Correction
February 2014 Technical Correction
Not printed with State funds

January 2019
Vessels
PIP VEFV1100M
Vessel/S&T Heat Exchanger Standard Details
(Metric Units)
Table of Contents
1. Scope ...........................................3
2. References ..................................3
2.1 Industry Codes and Standards .......3
2.2 Government Regulations ................3
Drawings
VEFV1101M – Vessel Nameplate Bracket
VEFV1102M – Vessel Tolerances (2 Pages)
VEFV1103M – Vessel Grounding Lug
VEFV1104M – Small Horizontal Vessel Saddle Supports
VEFV1105M – Horizontal Vessel Saddles Supported on Concrete
VEFV1106M – Horizontal Vessel Saddles Supported on Structural Steel
VEFV1107M – Vertical Vessel Type A Skirt Base Plate with Gussets
VEFV1108M – Vertical Vessel Type B Skirt Base Plate with Cap Plate and Gussets
VEFV1109M – Vertical Vessel Type C Skirt Base Plate with Cap Plate and Offset Gussets
VEFV1110M – Vertical Vessel Type D Skirt Base Plate with Top Ring and Gussets
VEFV1111M – Vertical Vessel Beam Type Leg Supports
VEFV1112M – Vertical Vessel Angle Type Leg Supports without Pad
VEFV1113M – Vertical Vessel Angle Type Leg Supports with Reinforcement Pad
Process Industry Practices Page 1 of 3

January 2019
VEFV1114M – Vessel Vertical Type A Support Lug with Cap Plate

VEFV1115M – Vessel Vertical Type B Support Lug with Cap Plate and/or Rings
VEFV1116M – Vessel Manway Hinges
VEFV1117M – Vessel Vertical Manway Davits
VEFV1118M – Vessel Horizontal Manway Davits
VEFV1119M – Vessel Column Davits (2 Pages)
VEFV1120M – Pipe Supports Attached to Vessels (3 Pages)
VEFV1121M – Pipe Guides Attached to Vessels (2 Pages)
VEFV1122M – Horizontal Vessel Insulation Supports
VEFV1123M – Vertical Vessel Insulation and Fireproofing Supports (5 Pages)
VEFV1124M – Vessel Vortex Breakers
VEFV1125M – Vessel Internal Ladders
VEFV1126M – Locking Studs for Heat Exchanger Removable Tubesheets
VEFV1127M – Heat Exchanger Fixed Tubesheet Vent and Drain
VEFV1128M – Skirt Attachments (5 Pages)
VEFV1129M – Vessel Studded Joints
VEFV1130M – Solids Product Container Blend Tube and Shell Interface
VEFV1131M – Solids Product Container Flush-Mounted Side-Entry Manway Detail
VEFV1132M – Minimum Clearance for Nozzle Adjacent to Integral Tubesheet
VEFV1133M – Internal Head Attachment
VEFV1134M – Skirt Openings Vertical Vessels (2 Pages)
VEFV113M5 – Flared Skirt Attachment to Shell Detail

PIP VEFV1100M TECHNICAL CORRECTION
Vessel/S&T Heat Exchanger Standard Details January 2019
(Metric Units)
1. Scope
This Practice provides fabrication and installation details and dimensional tolerances for the
design of supports and other attachments for vessels, heat exchangers and solids products
containers.
This Practice describes typical fabrication and installation requirements for the following:
a. Nameplate
b. Vessel fabrication tolerances and connection orientation tolerances
c. Grounding lugs
d. Horizontal vessel saddle supports
e. Vertical vessel skirts
f. Vertical vessel leg type supports
g. Vertical vessel support lugs
h. Manway and column davits
i. Pipe supports and guides from vessels
j. Insulation and fireproofing supports
k. Vessel internals
l. Heat exchanger tube sheet locking studs and vents/drains
m. Studded joints
n. Solids product container internals and manways
2. References
Applicable parts of the following industry codes and standards and references shall be considered
an integral part of this Practice. The edition in effect at the date of contract award shall be used,
except as otherwise noted. Short titles are used herein where appropriate.
2.1 Industry Codes and Standards

• American Society of Mechanical Engineers (ASME)
– Boiler and Pressure Vessel Code, Section VIII, Division 1
• American Society for Testing and Materials (ASTM)
– A123 - Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron
and Steel Products
– A143 - Standard Practice for Safeguarding Against Embrittlement of Hot-Dip
Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
2.2 Government Regulations
• U. S. Occupational Safety and Health Administration (OSHA)
– OSHA 29 CFR 1910.106(b)(5)(ii) - Fire Protection for Tank Saddles

Previews - 2033457 PIP VEFV1100M

Uploaded by

Copyright:

Available Formats

Previews - 2033457 PIP VEFV1100M

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Previews - 2033457 PIP VEFV1100M

Uploaded by

Copyright:

Available Formats

TECHNICAL CORRECTION

This Practice is subject to revision at any time.

© Process Industry Practices (PIP), Construction Industry Institute, The University of

Not printed with State funds

Process Industry Practices Page 1 of 3

VEFV1114M – Vessel Vertical Type A Support Lug with Cap Plate

Process Industry Practices Page 2 of 3

2.1 Industry Codes and Standards

Process Industry Practices Page 3 of 3

You might also like