Tutorials and Problems for

Discrete-Time Signals and Systems

Ed Doering
ECE Department
Rose-Hulman Institute of Technology

December 5, 2012

Contents
Introduction 3

Tutorials 3
Discrete-time sinusoids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Linearity system property . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Time invariance (shift invariance) system property . . . . . . . . . . . . . . . . . . . . . . . 3
Causality system property . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Stability system property . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Convolution sum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Geometric series closed-form equation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
N th roots of unity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Group delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Direct Form I flow graph . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Direct Form II flow graph . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Bilinear transform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

System Properties 5
Linearity #1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Linearity #2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Time Invariance #1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Time Invariance #2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Causality #1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Causality #2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Stability #1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Stability #2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Convolution 7
Convolution #1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Convolution #2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1
z-Transform 8
z-Transform #1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
z-Transform #2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Inverse z-Transform #1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Frequency Response 9
Frequency Response #1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Frequency Response #2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Frequency Response #3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Flow Graphs 10
Flow Graphs #1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Flow Graphs #2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Flow Graphs #3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Filter Design 12
Filters #1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2
Introduction
This document contains links to video tutorials, problem statements, and links to video-based
solutions of the problems. Open the PDF of this document to conveniently launch the videos by
clicking the cyan-highlighted links; click the red-highlighted entries in the table of contents to
jump to the desired tutorial or problem.
The problems contain links to specific time points in the videos represented by these symbols:
√
F = overall approach to the problem, = final answer, and s = full problem solution.

Tutorials
Discrete-time sinusoids
http://youtu.be/yLezP5ziz0U (11:41) – Study the behavior of sinusoidal signals in discrete-
time.

Linearity system property

http://youtu.be/hWPJ67Z8dkc (9:01) – Development of a formal proof method to establish
whether or not a system is linear. Includes two examples at 2:38 and 5:35.

Time invariance (shift invariance) system property

http://youtu.be/cKv_dlDAaIE (7:44) – Development of a formal proof method to establish
whether or not a system is time invariant, also known as shift invariant. Includes two examples at
3:19 and 5:01.

Causality system property

http://youtu.be/JP5xAnmJl4s (7:44) – Development of a formal proof method to establish
whether or not a system is causal. Includes two examples at 2:06 and 4:31.

Stability system property

http://youtu.be/crX0BxKxHGw (6:04) – Development of a formal proof method to establish
whether or not a system is stable in a bounded-input bounded-output (BIBO) sense. Includes two
examples at 2:18 and 4:33.

Convolution sum
http://youtu.be/U3BwStzKvs0 (9:16) – Discrete-time convolution sum of a linear time-invariant
(LTI) system with numerical example.

Geometric series closed-form equation

http://youtu.be/JJZ-shHiayU (3:48) – Derivation of the closed-form equation of a geomet-
ric series.

3
N th roots of unity
http://youtu.be/1BjDKRrR8-E (6:34) – Derivation and visualization of the equations for the
N th roots of unity and of −1.

Group delay
http://youtu.be/k5x9s6bMZ5s (7:33) – Develop the equation for group delay of a system
and apply the equation with two examples at 2:18 and 3:55.

Direct Form I flow graph

http://youtu.be/PS94WZFqiiY (8:52) – Development of the Direct Form I flow graph from a
system function.

Direct Form II flow graph

http://youtu.be/yW6zD36GDcs (2:56) – Development of the Direct Form II flow graph from
a system function.

Bilinear transform
http://youtu.be/OXhW-h8Tkao (17:34) – A study of the bilinear transform, especially through
visualization of the mapping between the continuous-time s-plane and the discrete-time z-plane.
Includes development of the prewarping equations for discrete-time filter design.

4
System Properties
Linearity #1
F
Formally prove whether or not each system is linear.
√
[a] T1 {x[n]} = 5 x[n − 10] s
√
[b] T2 {x[n]} = x[n]2 s
√
[c] T3 {x[n]} = x[n]/n s

http://youtu.be/jwDYSBsChUA (5:42)

Linearity #2
F
Formally prove whether or not each system is linear.
√
[a] T4 {x[n]} = x[−n] s
√
[b] T5 {x[n]} = n x[n] s
√
[c] T6 {x[n]} = nk=0 x[k]
P
s

http://youtu.be/GwLdxBf5pqI (5:37)

Time Invariance #1
F
Formally prove whether or not each system is time invariant.
√
[a] T1 {x[n]} = 5 x[n − 10] s
√
[b] T2 {x[n]} = x[n]2 s
√
[c] T3 {x[n]} = x[n]/n s

http://youtu.be/zMkXxI63_Og (4:55)

Time Invariance #2
F
Formally prove whether or not each system is time invariant. N OTE : The video solution to Part [c]
includes a second solution technique based on proof by counterexample.
√
[a] T4 {x[n]} = x[−n] s
√
[b] T5 {x[n]} = n x[n] s
√
[c] T6 {x[n]} = nk=0 x[k]
P
s
√
s
http://youtu.be/zT3xot8b3Ls (9:30)

5
Causality #1
F
Formally prove whether or not each system is causal.
√
[a] T1 {x[n]} = 5 x[n − 10] s
√
[b] T2 {x[n]} = x[n]2 s
√
[c] T3 {x[n]} = x[n]/n s

http://youtu.be/eXZwvrX47V0 (4:15)

Causality #2
F
Formally prove whether or not each system is causal.
√
[a] T4 {x[n]} = x[−n] s
√
[b] T5 {x[n]} = n x[n] s
√
[c] T6 {x[n]} = nk=0 x[k]
P
s

http://youtu.be/n2CyTrAOUbg (7:40)

Stability #1
F
Formally prove whether or not each system is BIBO stable.
√
[a] T1 {x[n]} = 5 x[n − 10] s
√
[b] T2 {x[n]} = x[n]2 s
√
[c] T3 {x[n]} = x[n]/n s

http://youtu.be/taaisxUnE1E (3:46)

Stability #2
F
Formally prove whether or not each system is BIBO stable.
√
[a] T4 {x[n]} = x[−n] s
√
[b] T5 {x[n]} = n x[n] s
√
[c] T6 {x[n]} = nk=0 x[k]
P
s

http://youtu.be/1MeunVzResU (5:00)

6
Convolution
Convolution #1
F
An LTI system has the impulse response h[n] = {1, 2, 0, −3}; the underline locates the n = 0 value.
For each input sequence below, find the output sequence y[n] = x[n] ∗ h[n] expressed both as a list
(underline the n = 0 value) and as a stem plot.
√
[a] x1 [n] = δ[n] s
√
[b] x2 [n] = δ[n + 1] + δ[n − 2] s
√
[c] x3 [n] = {1, 1, 1} s
√
[d] x4 [n] = {2, 1, −1, −2, −3} s

http://youtu.be/_RsMMkuQVUE (12:42)

Convolution #2
F
An LTI system has the impulse response h[n] = αn u[n] with |α| < 1. The input to the system is
x[n] = β n (u[n] − u[n − 5]) with no restriction on the value of β.
√
[a] Find the general closed-form equation for the system output y[n]. s
√
[b] Evaluate y[n] at n = 0, 2, and 10 for α = 0.6 and β = 0.8. s

[c] Create stem plots of x[n], h[n], and y[n] over the time range 0 ≤ n ≤ 10 for α = 0.6 and
√
β = 0.8. s
√
[d] Repeat Part [c] for α = 0.6 and β = −0.8. s

http://youtu.be/ps38QdEGL24 (13:36)

7
z-Transform
z-Transform #1
F
Given x[n] = (1/3)n u[n] + 3n u[−n − 1].
√
[a] Plot x[n]. s

[b] Find X(z) written as a ratio of two polynomials in z −1 . State the region of convergence
√
(ROC). s
√
[c] Plot the pole-zero diagram of X(z) and indicate the ROC. s

http://youtu.be/IdnH4LDs6BA (9:28)

z-Transform #2
F
A system has an impulse response h[n] defined as
 n
b , 0 ≤ n ≤ N − 1,
h[n] =
0, n ≥ N,

where N = 8.

[a] Tabulate the values of h[n] to four significant digits from n = 0 to 10 for b = 0.8 and for
√
b = 1.25. Visualize each version of h[n] as a stem plot. s

[b] Find the system function H(z) in terms of z (not z −1 ) and written in closed form, i.e., with
√
no summation symbol. State the region of convergence (ROC). s
√
[c] Plot the pole-zero diagram of H(z) for b = 0.8 and for b = 1.25. s

http://youtu.be/Cwit5qvAcRU (10:30)

Inverse z-Transform #1
F
Given the following system function:

1 + 0.25z −1
H(z) =
1 + 0.8z −1 − 0.84z −2
.
√
[a] Plot the pole-zero diagram of H(z). s
√
[b] Find a stable impulse response h[n]. s
√
[c] Find a causal impulse response h[n]. s
√
[d] Does an impulse response exist that is both stable and causal? Explain your answer. s

http://youtu.be/oEqq3S0itnQ (13:35)

8
Frequency Response
Frequency Response #1
F
An LTI system with input x[n] and output y[n] has impulse response h[n] = δ[n] + 2δ[n − 1] +
3δ[n − 2]. Find the system’s
√
[a] Frequency response H(ejω ), and s
√
[b] Steady-state output y[n] when x[n] = −2 + 3cos((π/4)n + π/3) + 10cos((3π/4)n − π/5). s

http://youtu.be/8eILsUt8PKw (11:53)

Frequency Response #2
F
An LTI system has impulse response h[n] = 2δ[n] + δ[n − 1] + 2δ[n − 2].

[a] Determine the system’s frequency response H(ejω ) written in the form A(ejω )φ(ejω ), i.e.,
√
isolate the real-valued amplitude function A(ejω ) and the phase function φ(ejω ). s

[b] Plot the frequency response magnitude |H(ejω )| and phase ∠H(ejω ). Label all significant
√
magnitude values, angles, and frequencies. s

[c] Use a suitable computer tool to plot the frequency response magnitude and phase plots
directly from the impulse response coefficients as a check on your work.

http://youtu.be/Bj-Wf2Rpn2A (13:23)

Frequency Response #3
F
An LTI system has impulse response h[n] = 3δ[n] + 3δ[n − 3].

[a] Determine the system’s frequency response H(ejω ) written in the form A(ejω )φ(ejω ), i.e.,
√
isolate the real-valued amplitude function A(ejω ) and the phase function φ(ejω ). s

[b] Plot the frequency response magnitude |H(ejω )| and phase ∠H(ejω ). Label all significant
√
magnitude values, angles, and frequencies. s

[c] Use a suitable computer tool to plot the frequency response magnitude and phase plots
directly from the impulse response coefficients as a check on your work.

http://youtu.be/d7AQ5-lL6QU (11:30)

9
Flow Graphs
Flow Graphs #1
F
Consider the system function
8 + 10z −1 − 12z −2
H(z) = .
2 − 4z −1 + 6z −2
Implement the system function as a flow graph using the following forms:
√
[a] Direct Form I, s
[b] Direct Form II, and
[c] Direct Form II transposed.
http://youtu.be/PpGeSGgQulg (3:58)

Flow Graphs #2
F
Given the flow graph below with f = 3 and g = 1/2:

√
[a] Find the system function H(z). s
√
[b] Write a single difference equation for the system by writing y[n] as a function of x[n]. s
√
[c] Draw the transpose of the given flow graph. s
√
[d] Determine the system function HT (z) of the transposed flow graph. s
√
[e] Is HT (z) equal to H(z)? Explain your results. s
http://youtu.be/ovBQX2DPDVw (13:24)

Flow Graphs #3
F
Three system functions are defined as follows:
2 + 4z −1
H1 (z) =
1 − z −1
−3 + 5z −2
H2 (z) =
1 + 3z −1 + 4z −2
3 + 7z −1 + 3z −2
H3 (z) =
1 + 2z −1 − 4z −2
The composite system function H(z) is the cascade of the three defined system functions.

10
[a] Implement H(z) as a cascade of three subsystems, each implemented as a Direct Form II
√
flow graph. s
√
[b] Write H(z) as a ratio of two polynomials. s
√
[c] Implement H(z) as a single Direct Form II flow graph. s
√
[d] Discuss the relative advantages and disadvantages of the two implementations. s

http://youtu.be/NdEL2-UPxj0 (11:46)

11
Filter Design
Filters #1
F
Design and evaluate a discrete-time Butterworth lowpass filter for an audio noise reduction ap-
plication that meets the following specifications:

• 44.1 kHz system sampling frequency,

• 5.0 kHz passband edge with 3 dB maximum passband ripple, and

• 10.0 kHz stopband edge with a minimum 25 dB stopband loss.

Follow the design procedure based on converting a continuous-time filter with the bilinear trans-
form.
√
[a] Determine the difference equation of the lowpass filter. s

[b] Plot the frequency response magnitude in decibels of your design as a function of cyclic
√
frequency f in Hz; mark up the plot to show that it meets specifications. s

[c] Confirm the accuracy of your difference equation coefficient calculations by using a discrete-
time filter design tool to create the filter coefficients directly from the design specifications.
√
s

[d] Plot the pole-zero diagram of the filter using a suitable computer tool. Discuss the rela-
tionship between the pole/zero positions and the frequency response magnitude. N OTE : A
correct plot depends on high-precision coefficients; use the coefficients from the filter-design
√
tool of the previous step. s

http://youtu.be/XlKxeRsSxPo (16:54)

12