Scribd Logo
Upload

Welcome to Scribd!

  • 94 views

    CTP040 High Speed Indication and Automatic Pneumatic Braking System

    Uploaded by

    ANAND KRISHNAN
    The document describes a high speed indication and automatic pneumatic braking system. It senses the speed of a vehicle using an electronic control unit connected to a solenoid valve. If the vehicle exceeds the set speed limit, the solenoid valve activates a pneumatic cylinder to automatically apply the brakes. A flow control valve regulates the air flow and braking speed. The system aims to reduce accidents caused by overspeeding by alerting drivers and automatically braking if they exceed the limit.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    CTP040 High Speed Indication and Automatic Pneumatic Braking System

    Uploaded by

    ANAND KRISHNAN
    94 views4 pages
    The document describes a high speed indication and automatic pneumatic braking system. It senses the speed of a vehicle using an electronic control unit connected to a solenoid valve. If the vehicle exceeds the set speed limit, the solenoid valve activates a pneumatic cylinder to automatically apply the brakes. A flow control valve regulates the air flow and braking speed. The system aims to reduce accidents caused by overspeeding by alerting drivers and automatically braking if they exceed the limit.

    Original Title

    CTP040 HIGH SPEED INDICATION AND AUTOMATIC PNEUMATIC BRAKING SYSTEM

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a high speed indication and automatic pneumatic braking system. It senses the speed of a vehicle using an electronic control unit connected to a solenoid valve. If the vehicle exceeds the set speed limit, the solenoid valve activates a pneumatic cylinder to automatically apply the brakes. A flow control valve regulates the air flow and braking speed. The system aims to reduce accidents caused by overspeeding by alerting drivers and automatically braking if they exceed the limit.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    94 views4 pages

    CTP040 High Speed Indication and Automatic Pneumatic Braking System

    Uploaded by

    ANAND KRISHNAN
    The document describes a high speed indication and automatic pneumatic braking system. It senses the speed of a vehicle using an electronic control unit connected to a solenoid valve. If the vehicle exceeds the set speed limit, the solenoid valve activates a pneumatic cylinder to automatically apply the brakes. A flow control valve regulates the air flow and braking speed. The system aims to reduce accidents caused by overspeeding by alerting drivers and automatically braking if they exceed the limit.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 4

    HIGH SPEED INDICATION AND AUTOMATIC

    PNEUMATIC BRAKING SYSTEM

    SYNOPSIS

    As for Indian road transport scenario is concerned, the accidents are becoming a
    day to day cause an attempt has been made in this project to reduce such mishaps.

    In our project a high speed indication is given and automatic pneumatic braking is
    applied by 5/2 solenoid valve and brake lever Arrangement when the setup speed is
    exceeded. In our project, we have used solenoid valve, Flow Control Valve and speed
    sensing equipment

    INTRODUCTION

    In this fast moving world accidents are becoming proportional to high speed. In
    this project we are dealing with the speed limit taking into consideration, the wheel
    speed. The speed of the vehicle is sensed by the electronic control unit and giving signal
    to the solenoid valve.

    The solenoid valve activates the pneumatic double acting cylinder when the speed
    of the vehicle above the setted speed limit. The flow control valve is used to control the
    amount of air flow into the cylinder, so that the braking speed also varied.
    NECESSITY OF USING AUTOMATIC BREAKING SYSTEM

    The rider while in action may drive in different speeds depending on his needs and
    his substance of mind. This may lead to negligence of visual indication of the speed that
    he is driving which in many incidents have proven to be a disaster.

    In our AUTOMATIC BREAKING SYSTEM the Light Indication is given to the


    rider against the high speed sop that he is brought to his senses from the deviation, the
    AUTOMATIC BREAKING SYSTEM enables the control unit and automatically vehicle
    stops by activating the solenoid valve.

    To prevent high speed in automobiles,


    To reduce the accidents caused be over speed,
    To provide additional brake in addition to the conventional breaking
    system,
    To reduce the deviation of the rider by the usage of alarm facility.

    OBJECTIVES

     To provide automatic braking system.


     To provide mind free ride for the motorist.
     To provide the nation with an accident free roads.
    APPLICATIONS

     Automatic braking system can be used in both light moving vehicles such as
    two wheelers as well as in heavy moving vehicles such as buses and trucks
    etc
     Automatic breaking system is flexible enough to be used in any type of
    breaking system.
     Automatic breaking system can be implemented in institutional vehicles,
    taxis, driving school vehicles, etc.

    ADVANTAGES

    Brake cost will be less.


    Free from wear adjustment.
    Less power consumption
    Less skill technicians is sufficient to operate.
    It gives simplified very operation.
    Installation is simplified very much.
    To avoid other burnable interactions viz.… (Diaphragm) is not
    used.
    Quick response

    You might also like