Scribd
Upload
131 views7 pages

Dead Load Staad Loading

This document provides instructions for a structural engineering exercise to assign dead loads to a building model using STAAD software. Students are asked to apply dead loads to the floors, roof, and framing members. They then run an analysis to obtain load and reaction summaries, displacement results, and internal and external joint forces. The goal is to familiarize students with applying structural loads based on building codes and preparing for structural analysis.

Uploaded by

shaina mae omandac
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
131 views7 pages

Dead Load Staad Loading

This document provides instructions for a structural engineering exercise to assign dead loads to a building model using STAAD software. Students are asked to apply dead loads to the floors, roof, and framing members. They then run an analysis to obtain load and reaction summaries, displacement results, and internal and external joint forces. The goal is to familiarize students with applying structural loads based on building codes and preparing for structural analysis.

Uploaded by

shaina mae omandac
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 7

CAPITOL UNIVERSITY

COLLEGE OF ENGINEERING

Cagayan de Oro City

CE 33

REINFORCED CONCRETE DESIGN

EXERCISE NO. 10

DEAD LOAD (STAAD LOADING)


TITLE

DATE PERFORMED:
____________________ EVALUATION RATING:

DATE DUE : Actual


Criteria
___________________ Score
 Promptness (5 pts.)
GROUP MEMBERS :
___________________  Neat ness (5 pts)

 Computations/Answers/dat
a Analysis and Sketches
SUBMITTED BY :
(80 pts)

___________________  Conclusion and


STUDENT Reflections(10)

Total (100 pts)


SUBMITTED TO :

___________________
INSTRUCTOR

REMARKS :
_____________ SEMESTER SCHOOL YEAR : ______________
SPECIFIC OBJECTIVES:

This exercise aims for the students to:

1. assign dead load along longitudinal and transverse frames using STAAD software; and
2. familiarize loading codes based on NSCP and building codes.

SIGNIFICANCE:

This enables the students to enhance its capability in the design aspect. This is in preparation for
the structural analysis output of this laboratory exercise.

INSTRUMENTS:

PC/Laptop/STAAD software

PROCEDURE:

1. Attach the following: ground and second floor plans; the transverse and longitudinal
sections; second floor and up beam arrangements; Roof framing arrangement/roof
beam arrangements.

Ground Floor Beam 2nd Floor Beam Roof Beam


Arrangement Arrangement Arrangement
2. Assign the computed dead in second floor, etc. and roofing line and show the result
from STAAD.

3. Run Analysis result.

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 1


LOADTYPE DEAD TITLE DL

CENTER OF FORCE BASED ON Y FORCES ONLY (METE).


(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.258950465E+01
Y = 0.255295132E+01
Z = 0.469065059E+01
***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 1)
SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = -1397.57
SUMMATION FORCE-Z = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN-


MX= 6555.51 MY= 0.00 MZ= -3619.01

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 1)


SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = 1397.57
SUMMATION FORCE-Z = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN-


MX= -6555.51 MY= 0.00 MZ= 3619.01

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 1)


MAXIMUMS AT NODE
X = -6.91239E-01 29
Y = -3.17245E+00 14
Z = 2.86622E-01 40
RX= -3.90292E-03 14
RY= -9.82290E-04 42
RZ= 1.21223E-02 14

EXTERNAL AND INTERNAL JOINT LOAD SUMMARY ( KN METE )-

JT EXT FX/ EXT FY/ EXT FZ/ EXT MX/ EXT MY/ EXT MZ/
INT FX INT FY INT FZ INT MX INT MY INT MZ

SUPPORT=1
17 0.00 -0.59 0.00 0.00 0.00 0.00
-8.65 -179.83 -3.86 0.00 0.00 -0.00 111000

18 0.00 -0.59 0.00 0.00 0.00 0.00


6.26 -181.59 -6.12 -0.00 -0.00 -0.00 111000

19 0.00 -0.59 0.00 0.00 0.00 0.00


-15.93 -278.33 3.85 -0.00 -0.00 -0.00 111000

20 0.00 -0.59 0.00 0.00 0.00 0.00


7.50 -260.53 5.94 0.00 0.00 -0.00 111000

21 0.00 -0.59 0.00 0.00 0.00 0.00


-3.99 -165.26 -3.12 -0.00 -0.00 0.00 111000

22 0.00 -0.59 0.00 0.00 0.00 0.00


-5.17 -193.69 1.66 0.00 -0.00 0.00 111000

23 0.00 -0.59 0.00 0.00 0.00 0.00


19.98 -134.20 1.66 0.00 -0.00 0.00 111000

FOR LOADING - 2
APPLIED JOINT EQUIVALENT LOADS
JOINT FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM-Z
24 0.00000E+00-1.06875E+01 0.00000E+00 4.51576E+00 0.00000E+00-6.11707E+00
25 0.00000E+00-8.02476E+00 0.00000E+00 1.31462E+00 0.00000E+00 6.11707E+00
26 0.00000E+00-7.39873E+00 0.00000E+00-4.17436E+00 0.00000E+00-6.65415E-01
27 0.00000E+00-8.12690E+00 0.00000E+00 3.34881E-01 0.00000E+00 4.21834E+00
28 0.00000E+00-3.06854E+00 0.00000E+00-1.04685E+00 0.00000E+00-1.61439E-01
29 0.00000E+00-7.91918E+00 0.00000E+00 8.88458E-01 0.00000E+00 0.00000E+00
30 0.00000E+00-6.28294E+00 0.00000E+00 8.98621E-01 0.00000E+00 0.00000E+00
31 0.00000E+00-5.82702E+00 0.00000E+00 0.00000E+00 0.00000E+00 1.87218E+00
32 0.00000E+00-3.93784E+00 0.00000E+00-1.61439E-01 0.00000E+00-1.72084E+00
33 0.00000E+00-1.61439E+00 0.00000E+00 1.61439E-01 0.00000E+00 1.61439E-01
34 0.00000E+00-2.51741E+00 0.00000E+00-1.26901E+00 0.00000E+00 1.35723E-01
35 0.00000E+00-1.06875E+01 0.00000E+00 4.51576E+00 0.00000E+00-6.11707E+00
36 0.00000E+00-1.06875E+01 0.00000E+00 4.51576E+00 0.00000E+00 6.11707E+00
37 0.00000E+00-2.04164E+01 0.00000E+00-1.07724E+00 0.00000E+00-1.19451E+01
38 0.00000E+00-1.78407E+01 0.00000E+00-3.84152E+00 0.00000E+00 1.20975E+01
39 0.00000E+00-6.06608E+00 0.00000E+00-3.95498E+00 0.00000E+00-1.61439E-01
40 0.00000E+00-5.82702E+00 0.00000E+00 0.00000E+00 0.00000E+00 1.87218E+00
41 0.00000E+00-7.91918E+00 0.00000E+00 8.88458E-01 0.00000E+00 0.00000E+00
42 0.00000E+00-3.93784E+00 0.00000E+00-1.61439E-01 0.00000E+00-1.72084E+00
43 0.00000E+00-1.61439E+00 0.00000E+00 1.61439E-01 0.00000E+00 1.61439E-01
44 0.00000E+00-2.51741E+00 0.00000E+00-1.26901E+00 0.00000E+00 1.35723E-01
48 0.00000E+00-1.55057E+01 0.00000E+00 0.00000E+00 0.00000E+00-4.90009E+00

APPLIED JOINT EQUIVALENT LOADS


JOINT FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM-Z
49 0.00000E+00-6.60313E+00 0.00000E+00-1.40212E+00 0.00000E+00 0.00000E+00

Conclusion and Reflection

You might also like