Scribd
Upload
72 views9 pages

Measurement System Analysis (MSA) : IM-213 MQC

The document is a presentation slide discussing Measurement System Analysis (MSA). It was presented by Naima Javed, an Assistant Professor at NEDUET. The presentation defines key terms related to MSA such as measurement system, measurement variation, repeatability, and reproducibility. It also discusses the IATF 16949:2016 requirement for conducting MSA studies in automotive industries. Finally, it lists the two main methodologies for performing MSA as attribute agreement analysis and gauge R&R.

Uploaded by

Abdul Rashid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
72 views9 pages

Measurement System Analysis (MSA) : IM-213 MQC

The document is a presentation slide discussing Measurement System Analysis (MSA). It was presented by Naima Javed, an Assistant Professor at NEDUET. The presentation defines key terms related to MSA such as measurement system, measurement variation, repeatability, and reproducibility. It also discusses the IATF 16949:2016 requirement for conducting MSA studies in automotive industries. Finally, it lists the two main methodologies for performing MSA as attribute agreement analysis and gauge R&R.

Uploaded by

Abdul Rashid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

IM-213 MQC Naima Javed ,Assistant Professor IMD

IM-213 MQC

Measurement System
Analysis(MSA)
Course Instructor:

Naima Javed
Assistant Professor-IMD
NEDUET
IM-213 MQC Naima Javed ,Assistant Professor IMD

MSA
 IATF 16949:2106 Requirement for Automotive
Industries:
7.1.5.1.1 MSA:
“Statistical Studies shall be conducted to analyze the
variation present in the result of each type of
inspection ,measurement & test equipment system.”
IM-213 MQC Naima Javed ,Assistant Professor IMD

What is meant By
“Measurement System”?

 The measurement system is the system we use to


measure our product or services and includes:
 People , tools ,environment, method, training
 Measurement System Analysis is used To determine
whether the measurement system is reliable and data
is accurate or not
IM-213 MQC Naima Javed ,Assistant Professor IMD

Components of Varation
&Measurement System Variation:
IM-213 MQC Naima Javed ,Assistant Professor IMD

Measurement Error
IM-213 MQC Naima Javed ,Assistant Professor IMD

 Repeatability:
The variation between the successive measurement of
the same part ,same characteristics by the same person
using same instruement.it is also known as test retest error.
OR
It is the variability of the measurements obtained by one
person while measuring the same item repeatedly
IM-213 MQC Naima Javed ,Assistant Professor IMD

 Reproducibility:
The difference in average of measurement made by different
persons using the same or different instrument when measuring
the identical characteristic of the same part.
OR
It is the variability of the measurements obtained by different
persons while measuring the same item repeatedly
IM-213 MQC Naima Javed ,Assistant Professor IMD
IM-213 MQC Naima Javed ,Assistant Professor IMD

MSA Methodologies:
There are two main methodologies
1. Attribute Agreement Analysis
2. Gauge R&R

You might also like