Equipment Inspection Checklist: Asset Data

Download as xlsx, pdf, or txt
Download as xlsx, pdf, or txt
You are on page 1of 4

EQUIPMENT INSPECTION

CHECKLIST
ASSET DATA
EQUIPMENT ID 00EKB11AT001 EQUIPMENT NAME Fuel Gas KO Drum
SERIAL NUMBER VESB-U-1091 DOSH REGISTRATION NA
VESSELTECH
MANUFACTURER ENGINEERING CONSTRUCTION CODEASME SEC VIII, 2010 ED + 2011 ADD.
YEAR BUILT SDN. BHD.
2012 YEAR COMMISIONED 2012
DRAWING NUMBER KPP-EKB-XE34 MEDIUM NATURAL GAS
SHELL SA-516M GR. 485N PRESSURE (BARG) 35
MATERIAL DESIGN
HEAD SA-516M GR. 485N TEMPERATURE (°C) 60
SHELL PRESSURE (BARG) 31-33
NOMINAL THICKNESS WORKING
HEAD TEMPERATURE (°C) 13-40
CORROSION ALLOWANCE HYDROTEST PRESSURE (BARG) 45.5

TECHNICAL INSPECTION DATA


EXTERNAL INTERNAL
1. NAME PLATE √ 1. SHELL NA
2. SHELL √ 2. HEADS NA
3. HEADS √ 3. CLADDING NA
4. SUMP √ 4. SUMP NA
5. NOZZLES √ 5. NOZZLES NA
6. FLANGES/WRAPPING √ 6. VORTEX BREAKERS NA
7. MANHOLE/CLOSURE/DAVIT √ 7. BAFFLES/WEIR/PARTITION-PLAT NA
8. LIFTING LUGS/EYE BOLT √ 8. SPLASH PLATE NA
9. STIFFENER RINGS NA 9. STAND-PIPES NA
10. SUPPORT/SKIRT √ 10. SUPPORTS NA
11. PAINT WORK CONDITION √ 11. DEMISTER NA
12. LAGGING / CLADDING NA 12. TRAYS/CAPS NA
13. PRESSURE RELIEVING DEVICES √ 13. SCHOEPENTOETER/INLET FLOW NA
14. PRESSURE GAUGE √ 14. PAINT WORK NA
15. OTHERS √ 15. OTHERS NA

Tick √ after inspection is performed or NA if item are not applicable. Result of inspection are to be reported in visual
inspection report.

PREPARED BY APPROVED BY

MOHD SHAMSUL AFFENDI


DATE: 12.12.2020 DATE:
EQUIPMENT INSPECTION
CHECKLIST
ASSET DATA
EQUIPMENT ID 00EKB11AT001 EQUIPMENT NAME Fuel Gas KO Drum
SERIAL NUMBER VESB-U-1091 DOSH REGISTRATION NA
VESSELTECH ENGINEERING
MANUFACTURER SDN. BHD. CONSTRUCTION CODEASME SEC VIII, 2010 ED + 2011 ADD.
YEAR BUILT 2012 YEAR COMMISIONED 2012
DRAWING NUMBER KPP-EKB-XE34 MEDIUM
HEADER
(SHELL / PRESSURE (BARG)
MATERIAL SIDE) DESIGN
TUBE TEMPERATURE (°C)
HEADER
(SHELL / PRESSURE (BARG)
NOMINAL THICKNESS SIDE) WORKING
TUBE TEMPERATURE (°C)
CORROSION ALLOWANCE HYDROTEST PRESSURE (BARG)

TECHNICAL INSPECTION DATA


EXTERNAL INTERNAL
1. NAME PLATE √ 1. SHELL N/A
2. SHELL √ 2. SHELL COVER/DISH HEAD N/A
3. CHANNEL/COVER √ 3. CHANNEL/COVER N/A
4. SHELLCOVER/DISH HEAD √ 4. NOZZLES N/A
5. NOZZLES/FLANGES √ 5. FLOATING HEAD COVER N/A
6. SUPPORT/SADDLES √ 6. WEIR PLATE N/A
7. LIFTING LUGS √ 7. GUIDE STRIPS/RAILS N/A
8. INSTRUMENT CONNECTIONS N/A 8. SACRIFICIAL PLATES/ANODES N/A
9. PAINT WORK CONDITION √ 9. OTHERS N/A
10. LAGGING/CLADDING √
11. OTHERS √
TUBE BUNDLES
1. STATIONARY TUBESHEET N/A 6. TIE-RODS/SPACERS N/A
2. FLOATING TUBESHEET N/A 7. IMPINGEMENT BAFFLE N/A
3. TUBE EXT/INT (BARE/U-TYPE) N/A 8.FLOATING HEAD/BACKING DEVIC N/A
4. TUBE ENDS N/A 9. SLIDING STRIPS N/A
5. BAFFLES/SUPPORRT PLATES N/A 10. OTHERS N/A
Tick √ after inspection is performed or NA if item are not applicable. Result of inspection are to be reported in visual inspection
report.

PREPARED BY APPROVED BY

MOHD SHAMSUL AFFENDI


DATE: 12/12/2020 DATE:

You might also like