Scribd
Upload
182 views3 pages

Standard Upvc Pipe Sizes: From Iplex 4.5 6 9 12 15 Nominal Size (DN) Outside Diam. Wall Thickness (MM)

The document contains a table listing the nominal sizes, outside diameters, and wall thicknesses for standard uPVC pipe sizes. There is also an example of a pipe thickness calculation for a DN40 PN12 pipe that returns the inner diameter, outer diameter, and wall thickness. A second example shows an error message for an invalid nominal diameter input.

Uploaded by

yoel cueva arquinigo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
182 views3 pages

Standard Upvc Pipe Sizes: From Iplex 4.5 6 9 12 15 Nominal Size (DN) Outside Diam. Wall Thickness (MM)

The document contains a table listing the nominal sizes, outside diameters, and wall thicknesses for standard uPVC pipe sizes. There is also an example of a pipe thickness calculation for a DN40 PN12 pipe that returns the inner diameter, outer diameter, and wall thickness. A second example shows an error message for an invalid nominal diameter input.

Uploaded by

yoel cueva arquinigo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

15 - - - - - 1.

5
20 26.75 - - - 1.5 1.9
25 33.55 - - 1.5 1.9 2.3
32 42.25 - - 1.9 2.4 2.9
40 48.25 - 1.5 2.1 2.7 3.3
50 60.35 - 1.8 2.6 3.3 4.1
65 75.35 1.7 2.2 3.2 4.2 5.1
80 88.9 2 2.6 3.8 4.9 6.1
100 114.3 2.5 3.2 4.8 6.3 7.7
125 140.2 3 4 5.9 7.6 -
150 160.3 3.4 4.5 6.7 8.8 10.8
200 225.3 - 5.7 8.4 11.1 13.6
225 250.4 4.8 6.3 9.3 12.3 15.2
250 280.4 - 7.1 10.5 13.7 17
300 315.5 6 8 11.7 15.5 19.1
375 400.5 7.7 10.1 14.9 19.6 -

Standard uPVC Pipe Sizes From iPlex


NOMINAL OUTSIDE 4.5 6 9 12 15
SIZE (DN) DIAM. WALL THICKNESS (mm)

3.- PVC pipes


1.8
2.2 Application Dn = 40
2.7 (with input validation) PN = 12
3.4 di = Pipe_PVC_Dint_dn_PN 42.85
3.9 de = Pipe_PVC_Dext_dn 48.25
4.9 s= Pipe_PVC_Thickness_dn_PN 2.7
6.1
7.1
9.1
- Application Dn = 40
12.8 (without input validation) PN = PN12
16.2 di = Pipe_PVC_Dint_dn_PN N/A
18 de = Pipe_PVC_Dext_dn 48.25
20.1 s= Pipe_PVC_Thickness_dn_PN N/A
22.6 The nominal diameter entered is wrong
-

18
mm

mm
mm
mm

mm

mm
mm
mm

You might also like