DSC TERMINAL UNIT GM-11IO0DSC Icom Inc.IMPORTANT READ ALL INSTRUCTIONS carefully and com- pletely before using the GM-110DSC, SAVE THIS INSTRUCTION MANUAL - This instruction manual contains important safety and operating instructions for the GM-110DSC. YOU MUST CONNECT the GM-1100SC to the IC-M710 ME/HF MARINE TRANSCEIVER, GMDSS version, to operate this DSC terminal unit. EXPLICIT DEFINITIONS ‘The following explicit definitions apply to this instruction manual WORD DEFINITION Personal injury, fre hazard or electric WARNING | shock may occur. CAUTION | Equipment damage may occur. Nore | disregarded, inconvenience only, No risk of personal injury, fre or electric shock. IBM © a reistered vademark of Intemational Buisness Machines, AT FIRST POWER ON © Self ID indication The GM-110DSC does not function when no ID is pro- grammed. Therefore, the ID code should be checked at first power ON. © Push (DMENU to select MENU mode. select work Seif 30 @ Rotate [DATA SELECTOR] to select “Self ID display, then push (ENT + Ino ID appears, aska Service Center to program your permite 1D code. self 1D 123456789 © Self testing The GM-110DSC has a self testing capability for the AFSK encoder and decoder. Use the function to check the unit, Without transmitting a DSC call. © Push (MENU) to select MENU mode, select work @ Rotate [DATA SELECTOR] to select, “Seif test” display, then push [ENT]. 1 IF*Self test OK" does not appear, contact a Service Center. self testTABLE OF CONTENTS sMPORTANT. i Group call 33m Geographical area call EXPLICIT DEFINITIONS: i mPosition request call 34 mGroup call INCASE OF EMERGENCY i mPoling call, 35 individual cal vo ‘TABLE OF CONTENTS i ‘ndvidval acknowtedgement CAUTIONS: iii 5 MENU MODE OPERATION 38 Poston request cal! General 38 Moston request acknowledgement 48 1 PANEL DESCRIPTION 1 Position seting 38 MPoling call 50 input 37 mPoling acknowledgement 50 ‘2 MODE DESCRIPTION 4 mFrequency input 8 Telephone call 3 ID Frequency delete 39M Medical transport call nese 52 ‘3 CALL PROCEDURE, © mAvtomatc print 39 mTestcall sonnets BD 1 Distress cal 6 aif testing = 40 Seloctable information 53 Distress category sven 8 MLSelf ID indication 40 Urgency cal 10 {9 CONNECTION AND INSTALLATIONS --- 54 mSaloty call 12. 6 MEMORY OPERATION ~ 41 mConnection diagram 54 Routine or ship's business call r= 14M Memeny description a oar panel description 55 Telephone call 16 mMomory wrting ~~ 41 mPrinter socket 0 56 Medical vanspor announcement = 18 sMemory reading “Al MACC socket : 7 ‘mPosition request call 19 AENMEA in connector 7 ‘Polling call 20.7 OTHER FUNCTIONS 2 DC power connector 7 Test call “21 Scan operation 42 Mounting : 58 Data input procedures 22 Auto acknowledgment“ 42 WUnpacking ~ 58 Printout 43m Dimansions 50 4. WHEN RECEIVING A CALL 10 24 Antenna conection 60 To receive a DSC call 24 8 SELECTABLE CONTENTS 44 MF use replacoment 60 Received information (RCV MSG) - 28 Distoss cal 44° MFuse replacoment 80 mDistrss call = 28 Distress acknowledgement “ AI ships call =~ 31 mDistress relay call 4510 DSC FREQUENCY LIST 6 ‘8 Geographical area call 81 misvess ay acknowledgement 45, Individual eal ~ 32 MAMI ship call 48 11. SPECIFICATIONS oeCAUTIONS AX WARNING! NEVER connect the terminal unit (and a DC-DC unit for European version) to an AC outlet. This may pose a fire hazard or result in an electric shock. A\ WARNING! NEVER transmit a distress call when your vessel does not need immediate help. Distress calls ‘can be used only in times of emergency. NEVER connect the terminal unit (and a DC-DC unit for Europe version) to a 24 V battery. This connection will ruin the transceiver. Europe version only! NEVER connect the GM-110DSC to the battery of a plus-grounding ship directly. The supplied DC-DC unit must be used between the GM-110DSC and the battery. Otherwise fuses might blow and the terminal unit cannot be used. NEVER cut the DC cable between the DC plug and fuse holder. If an incorrect connection is made after cutting, the terminal unit might be damaged. NEVER allow children to touch the terminal unt NEVER place the terminal unit where normal operation of the ship may be hindered or where it could cause bodily injury. NEVER expose the terminal unit to rain, snow or any liquids. KEEP the terminal unit and extemal speaker at least 1 meter away from your vessel's magnetic navigation com- pass. DO NOT use chemical agents such as benzene or alcohol when cleaning, as they can damage the terminal unit surfaces. AVOID using or placing the transceiver in direct sunlight or In areas with temperatures below - 20°C (- 4°F) or over 480°C (+140°F), AVOID connecting the terminal unit to a power source using reverse polarity. This connection will not only blow fuses but may also damage the terminal unit.Zz PANEL DESCRIPTION 1 ill @ KEYPAD | @ POWER SWITCHIVOLUME CONTROL, ole oot | © DATA SELECTOR, @pisTAESs swiTCH OVEN INDICATOR es CONTROL swiTcH @ FUNCTION DISPLAY * @cANCEL swiTcH —@ cau switcr @ KEYPAD + Recelved signals are decoded in the GM-110DSC. + Input the corresponding number or letters when required * Scanning frequencies can be programmed in up to + Other functions are as follows: 6 channels using MENU mode. +6 distress frequencies are always scanned in the + Stops emergency alarm (distress use) or repeating GM-110DSC regardless of scan key activation. beeps (general call use) *Used for “space” input when deleting a character‘ PEEM_ Enters SEL mode. SEL mode allows you to select during etter input. the format specifier ofthe scan key. scm Starts scan of the pre-programmed frequencies on SHIM __* Push totum the dimmer adjusting mode ON/OFF. the connected transceiver (p. 24) ‘Adjusts the display backlight via the [DATA SELEC- TOR}1 PANEL DESCRIPTION Enters Memory Writing mode (p. 41). +The selected DSC format and contents are pro- ‘grammed into a memory channel + Push this key, then push a digit key (memory channel ‘number, 1 ~ 8) to program. «Previously programmed memory contents are over written, Tums an auto ‘acknowledgement’ ON and OFF, land sets its contents (p. 42). +The auto ‘acknowledgment’ can be turned ON during the DSC Watch’ condition only. + Automatic acknowledgement does not function for a distress cal Enters MENU mode to prepare often-used iD codes, callAratfic frequencies, scan frequencies, ete (p. 36). Enters Memory Read mode to call up the pre- programmed DSC format and its contents (p. 41). + Push this key, then push a digit key (memory channel number, 1 ~ 8) to call up. (eur) ENT Enters RCV MSG (Receive Message) mode to call Up the received DSC format and its contents (p.26). + Up to 20 distress calls (inc, other calls in the distress category) are retained, + Up to 10 selective calls are retained until the terminal unit is turned OFF. ‘Clears input data or exits the selected mode. + Pushing this key does not exit the mode for some: rhumeralfettr input items. In such cases, [CTRL OFF] can be used to exit. ‘© Clears an “acknowledge waiting” display. + Cancels repeated transmission while waiting for a distress acknowledgement (p. 7). Prints out the received message when a printer is connected, +The automatic printout function fs availabe to printout the recelved information each time a DSC call is received (p. 29) “Programmed memory, frequency, ote. can also be Printed out when selecting its display (p. 97). * Enters the selected format and advances the item to indicate the contents. ‘Selects the traffic frequency when a DSC call is received,@ POWER SWITCH/VOLUME CONTROL ‘* Turns power ON and OFF when the control is pushed. ‘© Adjust the alarm and beep output level trom the ‘speaker. These audio outputs cannot be completely muted oven when the control is set fully counterclockwise, © DATA SELECTOR ‘* Selects contents in the selected item. '* Selects a cursor position during frequency or ID input © CALL SWITCH ‘© Push and hold the switch for 5 sec. to transmit the selected call. ‘= Push the switch to set the transceiver to the pre- selected DSC's call frequency (or channel) which is selected in SEL mode for detecting stand-by. © CONTROL OFF SWITCH Deactivates the transceiver control and returns the transceivers frequency (or channel) to the previous one. Y CAUTION: NEVER push this swifch while “acknowi- edge waiting” appears, This Is because this returns the transceiver to the previous frequency and there- fore, an ‘acknowledgement’ cannot be received. WW PANEL DESCRIPTION 1 @ CANCEL SWITCH Push this switch to cancel a distress call. @ OVEN INDICATOR Internal high-stabilty crystal oscillator unit contains a tem- perature-compensating oven heater. This high-stability crystal oscillator improves frequency stability. @ FUNCTION DISPLAY During normal operation the display shows position and UTC time when a GPS receiver is connected. This Is up- dated each time new GPS data is received. I no GPS receiver is connected, the position and UTC time must be set in advance. G NOTE: i GPS datas interrupted for 20 sec. the “GPS™ Z indication disappears. The terminal unit retains the most G recent cata in such cases, WN © DISTRESS CALL SWITCH Push and hold for § sec. to make a distress call, (See p.6)Al 2 MODE DESCRIPTION select call Control OFF peer a2alase Ges" is:00 All shipe DEF SEL MODE Used to select the DSC format specifier and to set its contents. AVAILABLE DSC FORMATS: + Distress call (pgs. 6, 44) + Distress acknowledgement (pgs. 90, 44) + Distress relay call (pgs. 28, 45) + Distress relay acknowledgement “All ships call (pgs. 8-13, 46) + Geographical area call (pgs. 8-15, 46) +Group call (pgs. 8-15, 47) + Individual call (pgs. 8-15, 48) + Individual acknowledgement + Position request call + Position request acknowledgement + Polling call (pgs. 24, 50) +Poling acknowledgement (pgs. 35, 50) + Telephone call (pgs. 16, 52) + Medical transport call -(ogs. 18, 52) *Test call (pgs. 21, 52) (p. 45) (pgs. 34, 48) (p. 49) select work Address 23 input. MENU MODE Used for pre-programming ID code, frequencies, etc. for convenient SEL mode settings. In addition, time setting and sel-testing for code encode! decode are available in this mode. AVAILABLE PRE-PROGRAMMABLE CONTENTS: + Address ID input /delete (p. 37/89) *Group ID input delete (p. 37/39) + Scan frequency input / delete (p. 38/39) + Call frequency input /delete _(p. 38/39) + Trafic frequency input / delete (p. 38/39) *Positionftime set (p. 36) + Automatic printout ONIOFF (p. 39) + Selttesting (p. 40) * Self-ID indication (p. 40)MODE DESCRIPTION 2 ‘AUTO ACK MODE ‘Sets ‘automatic acknowi- ‘edgement transmission to enable or OFF. The following reasons are Pees kar Pens Rae salable for an acknowt- edgement: + No reason given MEMORY READ MODE MEMORY WRITE MODE + Busy The strted DSC rma Tresel cee ad tat + Qperaornaataio = oman daa Speier ard cont canbe apes canbe oranmad = Elman dat progenmedinoonest8 toonest meray chan Essa oe mover chamelstreuek elo (ss scene Hore: baton Theorovenmestornat OPERATION canbototony wien a B50 specifier appears for 0.5 sec. @® Select the desired DSC Watch’ is selected. Shon cada re mena. © femal usty SEL ne. @ Set contents according to oPenarin: tetra eeee Rev se move Push [® MR], then push the @ After exiting SEL mode, No data, ‘Shows received call; acknow!- desired numeral key. push [© MW}, then push edgement, etc. the dered rer. The following number of mes- ssage channels are available: NOTE: The following formats cannot be memorized: “Distress: upto.20 Distress, Distress relay, test, and all acknowledgements. + Other DSCs : upto 10 spy3 CALL PROCEDURE Mi Distress call A distress call should be transmitted if, in the opinion of the Master, the ship or a person is in distress and requires immediate assistance, {A distress call should include the ship's position and time. ‘They are included automatically when a GPS receiver is connected. If no GPS is connected, input them, it possibe. NEVER USE THE DISTRESS CALL WHEN YOUR ‘SHIP IS NOT IN AN EMERGENCY. DISTRESS CALLS CAN BE USED ONLY WHEN IMMEDIATE HELP IS NEEDED. MOON © Confirm a gistress cals not being received itt up the switch cover, push and hold the [DISTRESS] ‘witch fo transmit the stress call ‘An emergency frequency (defaut: 2187.5 kHz) is auto- matically selected end the distress cali transmitted. + if you have the time, select the nature'of the distress and contents (p. 44). +I no GPS is connected, your location and’UTC time should be input @ After transmitting the call, the trans ceiver is set to the phone emer- gency frequency automaticaly (e. 2182.0 kHz) +The terminal unitis still waiting for an acknowledgement call on the pre- vious frequency (e.g. 2187.5 kHz). @ When receiving the 'acknow!- ‘edgement’, reply to the connected station via the transcelver’s micro hone as described on page at right. + Tho ‘acknowledgemont’is memorized Into the RCV MSG channel © Activate an EPIRB and prepare a ‘SART and VHF handheld trans- ceiver before launching a survival cratt. acknowledge waiting Distress ack 601234367 ID code of the coast station,© When no acknowledgement is received If no ‘acknowledgement 'is recsived, the emergency alarm will sound continuously. In this case, the terminal unit automati- cally transmits the distress call again every 3 to 4 minutes. ‘Push (CANCEL if you want to stop the alarm, +A distress relay call may be received atter several minutes from another ship if ‘acknowledgement’ cannot be received, from a coast station directly y CAUTION: DO NOT push [CLA] while waiting for an ‘ac- G knowledgement’, otherwise the distress call repeat is can- cote G Use tne (CLR! key only when you want 1 cancel - % peated transmission. CALL PROCEDURE 3 © After receiving an acknowledgement call ‘The following should commence your voice transmission after receiving a ‘distress acknowledgment’ from a coast station (or another ship). ‘* "MAYDAY" “Thisis ..... (your ship name)”. + The 9-digit identity AND the call sign (or other identification of the ship). ‘© The ship's position if the DSC distress does not include it. ‘©The nature of the distress and assistance re- quired. * Any other information which might facilitate the rescue.3 CALL PROCEDURE li Distress call to ships General DSC call with the ‘distress’ category may be used tor communications after the Distress call, ¢.g. you want to ‘change the operating mode, frequency, ete. The call is transmitted one time only although the distress call using the [DISTRESS] key sends 5 times repeatedly. © Push [@SELJt0 select SEL mode, @ Rotate the [DATA SELECTOR] to select the desired DSC format as described below, then push [ENT] select call Select call All shipe Geographical To all shipe To all ships in the specified area (Refer to p. 23 for area input) select call Select call Group Individual To.a group of ships (Refer to p. 22 for ‘address ID input) ‘To a specified ship or coast station ‘* When selecting ‘All ships’, ‘Geographical area’ or *Group’ call @ Rotate the [DATA SELECTOR] to select the ‘Distress’ as the category, then push (ENT. Bll shipe Category Distress @ Set all contents as displayed using the [DATA SELECTOR] and [ENT] key. © After the display at right appears, Ail ships push [CALL] momentarily to select | “tari reaay the call requency, ten confirm the | Push, ssee frequency isnot in use. cue © Push and hold [CALL] for 5 sec.t0 (Ga, ghipe transmit the distress cal eatling + The transceivers set tothe traic frequency after call transmission.‘+ When selecting ‘Individual’ call @ Select (or enter) the 9-digit ID code, then, push (ENT). + Use [DATA SELECTOR] to select the 1D code when the desired ship's ID is pre-programmed + Use digit keys to enter 9 digits for a non-programmed ID. Refer to p. 22 {or more information @ Set Distress’ as the category using the [DATA SELECTOR], then push [ENT] @Set al contents as displayed using the [DATA SELECTOR] and [ENT] key. © After the display at right appears, push [CALL] momentarily to select the call frequency, then confirm the frequency is not in use. CALL PROCEDURE 3 © Push and hold [CALL] for § sec. to snare transmit the distress call Rddeese 10 + After sending the call, the unit waits 135456789 ° reonieee for an ‘acknowledgement @ When receiving an ‘individual ac- knowledgement’ the display shows the received ID code. +The transceiver is eet tothe traffic frequency automatically Individual Category © Communicate with the station. Tadividual call ready push See Tndividuaa ‘acknowledge waiting Tad ack Tecesve 323456789 300m DSC Station’ 1D code (ame appears Athen the same ‘ode is programmed rend mode) *3 CALL PROCEDURE i Urgency call When you want send an urgency message to other ships, use ‘Urgency’ as the category. © Push [@SEL to select SEL mode. @ Rotate the [DATA SELECTOR] to select the desired DSC format as described below, then push [ENT]: Select call Geographical To all sie Toall ships in the spected area (Ffero p. 23 for ‘area input) select call Group Toa group of ships (oler top. 22 for ‘address input) ‘+ When selecting ‘All ships’, ‘Geographical area’ or ‘Group’ call @ Rotate the [DATA SELECTOR] to select ALL ships ‘Urgency’ as the category, then push | Category fen iegency @ Set all contents as displayed using the [DATA ELECTOR] and [ENT] key. © Ater the display atrght appears, (aii ships push [CALL] momentarily to select call ready the call frequency, then confirmthe | "earn *°° frequency isnot in use © Push and hold [CALL] for § sec. to transmit the urgency call + The transceiver is sat to the trafic frequency after call transmission. ‘Bll shipe calling @ Announce the message described in the box on the page opposite.‘+ When selecting ‘Individual’ call @ Select (or enter) the 9-digit ID code, then, push [ENT] + Use [DATA SELECTOR] to select the ID. code when the desired ship's ID is pre-programme + Use digit keys to entor 9 digits for a rnon-programmed ID. Referto p. 22 for mora information. @ Set ‘Urgency’ as the category using the [DATA SELECTOR], then push [ENT]. © Set all contents as displayed using the [DATA SELECTOR] and [ENT] key. © After the display at right appears, push [CALL] momentarily to select the call frequency, then confirm the frequency is not in use. CALL PROCEDURE 3 © Push and hold [CALL] for 5 sec.to _ [ Iadividua 7 acitoviedge SRT transmit the ‘urgency’ call. weleiag aastesgens + After sending thecal the uni waits Tsaeberes foran ‘acknowledgement as at ght. © When receiving an‘acknow- edgement, the display shows the received ID code. 1h wansceiver sso othe atc frequency automaticaly. suns tiane soma Creatzaas Etegeey @ Announce the folowing messageto ienvinedcl one the connected station. » “PAN PAN” (repeated 3 times). '* Desired station name or “all stations” (repeated 3 times). Individual © “This i y". ndiyiduad “This is (your ship name)’ perh sees ‘* The 9-digit identity AND the call sign (or other identification of the ship). ‘The text of the urgency message. TW3 CALL PROCEDURE i Safety call When you want to send a ‘safety’ message to other ships, use ‘Safety’ as the category. ® Push [@SEL] to select SEL mode, @ Rotate the [DATA SELECTOR] to select the desired DSC format as described below, then push [ENT] = Select call Geographical To all ships Teall sis in be speciied area. (Folerto p. 23 for area input} Select call Gndividual Toa group of ships othe specitiog ship (Refer to p.22 or cor coast station ‘addres input) ‘+ When selecting ‘All ships’, ‘Geographical area’ or “Group’ call @ Rotate the [DATA SELECTOR] to select ‘Safety’ as the category, then push enn, @ Set all contents as displayed using the [DATA SELECTOR] and [ENT] key. © AMter the display at right appears, push [CALL] momentarily to select the cal frequency, then confirm the frequency is not in use. © Push and hold [CALL] for § sec. to transmit the ‘safety’ call, + The transceiver is set to the trafic frequency after call transmission, © Announce the message described in the box on the page opposite, All ships Category, Safety BIL ships ‘call ready Push sec ALL All ships calling+ When selecting ‘Individual’ call @ Select (or enter) the 9-digit ID code, then, push [ENT] + Use (DATA SELECTOR] to gelect the ID ‘code when the desired ship's 1D is pre-programmed, + Use digit keys to entor 9 digits fora non-programmed ID. Referto p. 22 for more information, @ Set ‘Safety’ as the category using the [DATA SELECTOR], then push ENT) © Set all contents as displayed using the [DATA SELECTOR] and [ENT] key. © After the display at right appears, Push [CALL] momentarily to select the call frequency, then confirm the frequency is not in use. Tadividwa Address iD 20456789 2eoW ENC Individual, category Sai CALL PROCEDURE 3 Tadi vidual ‘acknowledge waiting @ Push and hold [CALL] for 5 see. to ‘transmit the ‘safety’ call. + Alter sending the all, the unit wats foran ‘acknowledgement as at right @ When receiving an ‘acknowi- ind ack edgement, the display shows the Teceive received 1D code. 12aase7es ie ear eons ; quency automatically ‘Station's ID code ere © Announce the following message to when the same tocornecod sation Sisco + “SECURITE” (repeated 3 times). * Desired station name or “all station” (repeated 3 times). © Thisis........ (your ship name)". +The 9-digit fdentity AND the call sign (or other fentifcation of the ship). * The text of the safety message. ry3 CALL PROCEDURE ll Routine or ship’s business call When you use DSC for general selective calling, use ‘Routine’ or ‘Ships business’ as the category. @ Push [@SEL to select SEL mode. @ Rotate the [DATA SELECTOR] to select the desired DSC format as described below, then push [ENT]: ‘©All ships’ call cannot be used for the ‘routine’ or ‘ships buisiness’ category select call select call. Geographical Group Toall ships inthe Speci’ area ‘To group of ships: (toler top. 22 for address ID input) = select call Individual ‘When selecting ‘Geographical area’ or ‘Group’ call @ Enter the desired area or group ID code via the keypad or [DATA SELECTOR], respectively, then push [ENT] +Roler'to p. 22 or p. 23 for details. @ Rotate the [DATA SELECTOR] to select "Routine’ or ‘Ships business’ as the category, then push [ENT]. Category Routine © Setall contents as displayed using the [DATA SELECTOR] and [ENT] key. [ Azea + 2177 Wiz should be used forthe 312177 one shi-to-ship cal frequency, © After “call ready” appears, push [CALL] momentarily to ‘select the call frequency, then confirm the frequency is notin use. @® Push and hold [CALL] for § sec. to transmit the call. The transceiver is set to the traffic frequency after call transmission ® Announce the following message to stations. ‘= “All stations” or group name. (your ship name).* Identity OR call sign (or other identification of the ship).CALLPROCEDURE 3 . ae ush and hol for 5 sec. Individual When selecting ‘Individual’ call © Push and hold [CALL] for sec. to | Hndividual @© Select (or enter) the 8-digit ID code, [Faaividuad transmit the DSC call weltieg then, push [ENT] Address 1D + Aiter sending the call. the unit waits 125456769 Use [DATASELECTOR]1 selectthe 10 | ream nse for an ‘acknowledgement’ as a right. ‘code when desired ship's ID (or coast station's 1D) is. pre-programmed. @ When receiving an ‘acknow- eaters + Use digit keys to enter 9 cigits for ‘edgement, the display shows the Faceive non-programmed ID. Referto p. 22 received ID code. azarae for more information + The transceivers sotto the traffic. frequency automaticaly. Station's ID code @ Set Routine’ or Ships business’ in (Frazvigual (rare appears category using the [DATASELECTOR], | Category @ Announce the following message to Saveis programmed then push [ENT] Routine the station. in MENU mode) ‘= The 9-digit identity (or call sign or other identification) of the station which you want to call "This is... (our ship name).” + The 9- [Subsequent |» [Position ]+ [UTC time] [To station Gall frequency Received data] [Received data] [Recehed data) [Recoved data) [Roceved | laranpe + 21873 le " " data 2 aaor sie | Able to change | Able to change. ‘Able to change | | Able to changs| | Coast ——+ }* 6312.0 kHz — Bae nN + e414 5 kee “ise “iasrro kite Heed tte ‘ne of BSC perenne | dress te Peortelar lf Distress relay acknowledgement G Distress relay acknowledgement a » [iat] > [Babseguent] + Peston] | + ; Holayed iO] » [Haare] > [Subsea i Ti Galreg—] 4 Devece rey atnowteda Received | [Recoved | | Received | [Rocaved | [Received | [Rovheddata | 7CSnbe used ony when a stess data ate data eta data q G station,46 8 SELECTABLE CONTENTS BAI ships call Drea aR Bnd telecom —|>[ Cal requency Gaiegon | > [Tatiecommand] + [Message] [TSAR eee} eaten “Ontress: ae Frequency +> | pre-programmed -sNeutral ship announce | | + 4207.5 kHz Urgency owe pee | ate Folowingare | |* est20 wie Safety “FIBU2B FEC MU channel. rectinput Data'nanemnit + 8414.5 KHZ SF1BU2B ARQ mt | Protecolsusedin | |‘y2srro wre “FIBN2B Position —}—» [~~ Position Asttel, 316804,5 KHZ £18128 receive a Danvar AIA tape recorder| ar ua vz2 ‘One of DSC “AIA Morse = poea vas distress teq. al Position input posses 3 3c Beavis wr ELCraGr “Data V.27 tor |) |Bee Ve Timeinput | | DRaV 32, Il Geographical area call — Direc inpat andtwiecom | [Gallroqueney input]>[ Category |>[fatiolcommand|+| Massage Ares inputl>| Category |rirst oF selection from No information Wen dstess, Reterto | |-Distess | [use Frequency ++] pre-programmed L ‘Nauta stip aeneunce| | ugoney or salty pastor | |urgency | |e [Cane eee eras” | |-satery | | Fie. TU chanel ore Ono of DSc “Ship's /+F1BU2B ARQ [Direct input distress freq. ‘busness | |-F1B128 Postion —be Postion se Routine | | F128 receve| Postion. inns bans SAtanone [Manas Brent epator ‘Data selecting rom “Fioracirac Postion input poured 4 Data V.32. “call fea. Time input | [-PaCDATASELECTABLE CONTENTS 8 Group call age] [recipe —] Bnd elecom + [ Call requency input _|+[ Category [e[fettclecommand)>[ Message ] [DVetionut Tones) hemes Reterto | [-Diess | | 98 Frequency +b | pre-programmed Sree eo ceee p.22for | |-Urgency | | -HOE raf’ rea Following are Direct input or totals ‘Safety THieuspana | [TUchane input ‘Data’ transmit selecting rom “Ship's -F18(028 ARQ La protocols used in| | reprogrammed business | |-181028 Posiion —b+ Postion ] ‘etter Perey Routine | | £18128 receive co “Bea v21 ee tata vce Manual Data Va is When des, “AYA Morse {Menai Bea viza ugeny estoy s be Position input pass sa selected: -FICIFRCIRSC Es “Dasa 28 er Orestose Bea vae distress toa, [Teen | [DENS8 SELECTABLE CONTENTS Wl Individual call input |>[ Category |>[fetietecommand)>{ Wessage | [Oe mPst ‘2nd telecom —|»[ Gall frequency “f B Jor selection rom | No information | | Whan ships business | Reefer to ‘Distress Ee Frequency +*| pre-programmed p.22t0r- | |-Urgency | |-HaE eee Tiree bea, or routines select: Gerais” | |saey” | |ereuea FEC | [ru channels — Diet inptor ‘Stipe | |Srrauee ara reat npat Datars | |asacing rom business | |-F1B 1028 Postion tel Bootie potas pre-programmed /+Routine -F1B/J2B receive | rate — Data V2 ‘call freq. wie Data V.22 a Manvai ‘Sue zete | [ender (rewnes) | eae | [seme Position input baa 20 be solctot —_ Bos var er [One of DSC =) | Beavae isos rea Time input’ | | FAKIOATA I Individual acknowledgement (Address 10] » [Category] > [tsttelecom| » [Message |» [znd telecom) » [Calltreq] » [Comply Feceved | [Raced] [Recoved "| [Recehed |” [Rocohed | [Received] — [able fate Gata ata oan | late cae | ee Baa woo fica | [eee] fetes | Ls rain change Bey Operator unavable “Eruipment date cl unabi tose *Mode unable to useSELECTABLE CONTENTS 8 i Position request call input] > [7 Categor > [Taadtelecomand] > [7 Galltrequency Refer top. 22 “Distros No information When ship’ business or for details Urgency Neutral ship announce routine is selected: *Salety Direct input or selecting “Ship's business: from pre-programmed Routine ‘eal freq. When distress, urgency or safety is selected: ‘One of DSC distress frog Position request acknowledgement ‘Addresei | > [Category] » [2ndtelecomand] + [Callfrequeney] > [Position Received Received Received data Received data | [Auto 7 ata data = roam jAbie to change| [Manual +*) postion |» | UTC time Manual input] |Manual input8 SELECTABLE CONTENTS a Polling call input Category | > [_andtelecomand | + ["Gallfrequeney Reterto p. 22 “Distros No information When ship’ business or for details ‘Urgency Neutral ship announce routine is selected: *Safety Direct input or selecting Ship's business. from pre-programmed Routine ‘eal freq, When distress, urgency or saety is seloced: ‘One of DSC distress fre, a Polling acknowledgement “adress ID] > [“Gategory ] » [Znadtelecomand] » [Cat requeney Received ‘Received Received data Received data as data Able to changeli Telephone call [Telephone SELECTABLE CONTENTS 8 umber % Aaareas Entoror sleet @ cous staion D. tertop. 2207 deta ee a Direct input fatieecommand) » [ie or election rom sttslecommand] + [Message | | pre-programmed ie uenc 1 traffic freq, “HSE Frequency 7 TTY channa Postion None Poston inp] anaeom = Ro information -Pubecalofice Tine input | Salltegueney Direct input or psecing tom Preprogrammed ered a8 SELECTABLE CONTENTS i Medical eansport call Call frequency + 2187.5 kez + 4207:5 KHz + 63120 KHz + e414 5 ke "1257.0 kite 16804 5 kHz (One of DSC distress trea. ‘Ist telecommand ‘Message ee f SE Frequency pre-programmed HSE "rat t “Frauza FEC aise -F18/J2B ARQ: |~* [Direct input 19128 <= | *F181028 receive Pest Postion | “AIA tapo recorder = “AIAMorse anual a [Peon] [ Time input Test call Address] > [Callrequency Enterorseleta| | 2167.5 KHz coast station + 4207.8 kz + gata. iz Rotertop.22for| | eaiasiiz deat. fiasrr. ke fea04 kz One of SE distress freq. Y Tre folowing contents J are fixed and not Z indicated: “Format specter: All ships call, Category: Urgency +2nd telecommand: Medical transport WOONSelectable information SELECTABLE CONTENTS 8 © Nature of distress © Category + Fire, explosion + Sinking ete All ships call has these 3 categories + Flooding + Disabled and adritt + Urgency only + Colision + Undesignated distress +Safety * Grounding + Abandoning ship ~ Ship’s business | Other general calls have these 2 + Piracyltobbery attack Routine categories additionally + Man and over board 2nd telecommand * No information Usable with almost selective © 1st telecommand + Neutral ship announce] calls and/or mode srminal equipme + Data V.21 Use andiormede | Terminal equipment = Daavay 73 Telephone | HE Telephone {Data V23 Usable only when ‘Data is *FiBu28 FEC | Teleprinter (NDP) "Data V26 bis ——_| selected in tne ist telecom +F1B1N2B ARQ | Telentelepiner (NBOP) * Data v.28 tr mand + F1B2B Teleprinter + Data V.27 ter £18128 receive _| Teleprinter *Datav.3e + AIA tape recorder | Tape recorder for Morse * FAXIDATA “AIA Morse Morse key =Noveason gen TPrGrzcrsc _| Modem nd tlecommancy * Operator unavailable | Usable for an ‘acknowd- FEC: Forward Eror Correction System ‘ARQ: Automatic Request of Repetition NSDP: Narrow Band Direct Printing Equipment + Equipment disable * Channel unable to use + Mode unable to use gement’ only *Public call office Usable for Telephone’ call= mmm. 9 CONNECTION AND INSTALLATIONS Connection diagram =. (a)@ Rear panel description @ ANTENNA CONNECTOR Connects a 50 © antenna with a PL-259 plug for emer- ‘gency frequency signal receiving. + Frequency coverage: 2187.5 to 16804.5 kHz @ DISTRESS SWITCH RECEPTACLE Connects to the supplied distress switch box. © DC POWER CABLE Connect to a regulated 12-16 V DC power source such as 12 V battery or DC power supply using the supplied DC power cable directly (for U.S.A, version), or using the sup- plied DC-DC unit box (lor Europe version). Supplied cable's polarity: Red @° Black: © CAUTION : DO NOT connect a 24 V battery even when using the DC-DC unit. This will damage the transceiver. 2 "AUTION for Europe versions: DO NOT connect di- rectly to a battery for a plus-grounding ship. ALWAYS use the supplied DC-DC unit box. DAW @ GROUND TERMINAL CONNECTION AND INSTALLATIONS 9. Connects a ship's ground. @ NMEA CONNECTOR Connects a GPS receiver (NMEA0183 ver 1.5 or 2.0) for sending positioning data without manual input. @ ACC SOCKET Connects an Icom MF/HF GMDSS transceiver such as the IC-M710 GMDSS version using the supplied cable. @ PRINTER SOCKET Connects an IBM centronics or conipatible printer to print out received DSC infomation automatically or manually, (© EXTERNAL SPEAKER RECEPTACLE Connects an 8 Q external speaker with a ‘/« inch ‘monaural plug © CLONE RECEPTACLE For dealer use only.Q CONNECTION AND INSTALLATIONS @ Printer socket 2s “ [esn555550000 [coovcocdecc0 1 [Re [in name [vo Description Ei [Pmname [v0 Description 1 [ StROBE |ou| Outputs svobe pulse ator data ouput 38] eno Connected to ground 2 [oatar [oat 2 foatar [out 18 [NC 'No connection # [oatas [out ® lay 3 [oatar Tout eno Connected to ground 51 DATA _[OUt| paral! data output 2 . 7 [DaTAe [out ut | OPUS an tiazing signal to the printer 8 | DATA? [Out Steam ca ust before data output. 9 | DATAs [Out | - ERROR | in | The printer sos tis pn to "Low when an [FERRIS | 1n | Reveves a Low pulse rom the printer 32 | ERROR | in | Te rinor sts tis pin ied ome ead when the printer can accept more data. a ‘The printer sets this pin to ‘High’ when it 33 | GND Connected to ground 11] eusy | tn | cannot accept data, suchas when ‘ft 7% [we Ne connection 7 35 [+5V___| In | No connecton inthe GW-11005C. [Ne No connection 36 [NC No conneationHACC socket Pin CONNECTION AND INSTALLATIONS 9 MENMEA in connector o©—™ Ne NMEA IN - ‘Acceptable version: NMEA0183 ver 1.5 or 2.0 PRT in name Deseripsion ‘Accaplale command : GGA (GPS dt; ene ad poston) Wodulaton ouput a ranecoNor GGL (Loran ta poston ony) 1 | pmo» | oxtputimpadance 6000 Ouputiovel Approx. 800 mV rms 2 | pMD- | Coaxial ground for DMD "AF input roma vanecohver 3.| Dare — | input impedance :6000 IDC power connector Input level: Approx. 025-25 Vims 4 | oaF- | Cossal ground for DAF 5 | NMo+ | NMEA data ouput 6 | wmo- | coavial ground for MO (OC input © 7 | mie | NMEA cata input {wit abl Max power curent: 3.0, 8 | mt | coasia ground for Ne Input vohager 18.8 VDC + 15% | ano | GrounaQ CONNECTION AND INSTALLATIONS ™@ Mounting ‘The universal mounting bracket supplied with your terminal unit allows overhead or dashboard mounting. Please read the following instructions carfeully. = Mount the terminal unit securely with bolts and nuts or it may come loose as a result of wave shocks or vibration, '* Mount the terminal unit so that the face of the terminal Unit is at 90 degrees to your line of sight when operating it CAUTION: KEEP the terminal unit and external speak- cer at least 1 meter away from your ship's magnetic navigation compass. NOTE: Check the installation angle; the function display ‘may not be easy-to-read at some angles. WV Net Soring “re Fat washer ee Oe Use atacnos men using sel-tapping screws (Use both spring and fat washers)© Distress switch box mounting @ Remove the 4 sorews trom the switch boxas shown below DISTRESS SWITCH BOK @ Place the switch box in the location to be installed. + The switch box can be installed in 2 orientations as below. ®Open the switch box and carefully mark off the 2 spots where the scraws/ootts willbe fastened, @ Drill holes at those marks, if necessary. ® Install the switch box using the screws or bolts. CONNECTION AND INSTALLATIONS 9 @© Reassemble the switch box with the 4 screws, @ Supplied accessories ‘© Mounting bracket : @DC power cable (OPC-571) ........ 0.00.05 Cable for connection witC-M710 (OPC-530) @DC-DC unit (Europe version only) © DC power cable for connection w/DC unit (OPC-616; Europe version only) © Speaker plug (‘/s in. /2-conductor) © Fuse (FGB 3 A) . @ Setttapping screws (ROS %20) sos. es ss. ® Mounting bolts (M5 x 20) Nuts (M5)... . 1) Flat washers (M5) wee ® Spring washers (M5) ® Distress switch box G Selt-tapping screws (AO 5 x 20) .Q CONNECTION AND INSTALLATIONS Antenna connection ‘The terminal unit has a scanning receiver which can receive 6 distress and safety frequencies. A separate ‘antenna from that of the transceiver is necessary. Select a well-matched antenna and feediine. A whip or long wire antenna may be available to use with the GM-110DSC. Required specttications for the antenna Frequency coverage : 2to 16 MHz or wider Inputimpedance — : 509 Connector : PL259 Wi Fuse replacement ‘Two fuses are installed in the supplied DC power cable. Ita fuse blows or the terminal unit stops functioning, track down the source of the problem, if possible, and replace: the fuse with a new, rated fuse. ‘© Fuse rating: FGB 3 A (supplied) JfDSC FREQUENCY List 10 © Emergency frequency © Call frequency {Unie ste) ose | Rta | Ra Tian Rave Fama Frome woneee [tar any | nag teneny [Seon ve | aarsum| seowe] airesime) [sue] aro | avo [wren iee | woorrs | aso He | 4207.5 kHz | 4125.0kH2 | 4177.5 KH2 NATIONALOT| 21560 | 16210 |[INTER 12-2 | 125780 | 126575 tes | ss120KHz| e2i50KHz| e268.0KHz| |[NATIONALO2| 21565 | 16215 ||INTERI2-9 | 126785 | 120580 fre | e4t45 kHz | e201.0kHz | 8376.5 KHz NATIONAL Oa| 2157.0 | te220 |[INTER 16-1 | 168050 | 169030 HEt2 | 1257.0 wHe | 12280.0 KHz | 1252002 | | NATIONALoa| 2157.5 | 16225 |[INTER 16-2 | 1e8055 | 169085 wee | esoe sis [x20 oie [reps ive} [naTiONaL os|_ateno | teaso |mreno-s-| owe | Teeoee NATIONAL O7| 2158.0 | 16240 |[INTER 18-2 | 1880.0 | 197080 NATIONAL OB] 21505 | 16245 ||INTER18-3 | 198905 | 197045 INTER 2-1 | 21895 | 21770 ||INTER22-1 | 229745 | 224aa0 Marine frequency band INTER 4-1 | 42080 | 42105 |[intenz2-2 | 220750 | 2eaaas INTER «-2 | eons | aze00" [ten zee | exes | 220 48> 2ene0 ne INTER «3 | eaono | azzos ienzs-1 | estos | 01210 eid INTER @-1 | entgs | exeno”[nenzs-r | zxsono | ora 8.0 8.9999 MHz INTER 6-2 | e3130 | 63515 || wrenzs-a | 225005 | 261220 12.0 ~ 13.9999 MHz INTER 6-3 | 63135 | 63320 _ 16.0— 17.0000 Miz INTER 6-1 | e450 | 64305 | aoe aaa INTER a-2 | eeies | eearo eee wen @-3 | ergo | earsmag 11 SPECIFICATIONS © General ©} Receiver ‘Antenna impedance: $09 (80.239) + Receiving mode 128 + Froquoncy stability = 10H *Sensitvty 0.5 pV for symbol error rate st010 (measured on detected audio frequency) + Selectivity ‘Less than +500 Hz/~40 dB ‘Number of memory channels ‘Command memory : 9 channels + Receive system ‘Single conversion euperheterodyne Frequency memory : 35 channels, ‘Adress ID memory: 100 channels. IF frequency 9.0106 MHz + Powor supply requirement ‘+ Spurious rejection + More than 7048 USA. version 13.6 V DC (negative ground) Europe version: 12.6 VDC (loating ground) + Image rejection More than 70 48 + Current drain ‘Audio output power: More than 1.5 W at 10% distortion with Roceive stand-by : 1A an 8Q load. Receive audiomax.: 1.5 ‘At power ON 3A (max) + Audio output impedance 8Q (114 2-conductor socket) + se 150(W) * 49.5(H) X 180(0) mm 529|32(W) x 115116(H) x 73/326) in © External connection = Weight “Terminal unit 4.9Kg (351) ‘+ Acceptable NMEA data: NMEA 0183 ver 15 0F 2.0, DC-DC converter 1.0 Kg (Europe version ony) (command GGA and GLL) + Usable tomperature range: 15°C to +60°C (+5 *F to +140°F) = Printor 1BM® Centronics 2—_ DIMENSIONS 12 [al GM-110Dsc atts. 12 1 180 - hi — Saa6 Tec O} Pe hoe “as | — Distress switch box 2 f ( 48 t al ° iq | [ |Count on us! com America Inc. Sarah cea NE ates ans. nal eka Fae eo awe -18e21.COUAMER BE ‘on Srian, Panes) 467 com Canada BENSALEM Pie Hy 5 as ae ee smo Icom (Australia) Pty, Ltd I Vo ste Ps 0 sar osss Fn: on sna com (Europe) GmbH eppersan Case, nei Sr 10, SEES nay Mate ec sir Fn ss Icom Telecomunicaciones si. SASS SSE Sga Bes Garona SPAN Poa 8046 82 Fx) 5890448 oom (UK) Lie. Um Sea Hea Wag TED. UK. Pine SREP AARP SRT a sua uncau com France Sa Fece SEr 505 as Eee S808 Tome Sens Bouma A-53790418XD Printed in Japan Copyright 1987 Icom Inc. 1 Icom Inc. 6-9-16 Kamihigashi, Hirano-ku, Osaka 547 Japan