Wanefoam RB1024-101: Polyurethane Panel System

TECHNICAL DATA SHEET
WANEFOAMTM RB1024-101 REVISED ON 22 JULY, 2015
WANEFOAMTM RB1024-101
Polyurethane Panel System
Description
WANEFOAMTM RB1024-101 formulated polyol is a discontinuous PUR sandwich
panel system designed with HCFC-141b as blowing agent. It is widely used to
produce panels for different applications, such as cold storage, construction,
manufactured housing, construction, roofing hospitals, deep-freeze stores, airports,
residential care homes, hotels, workshops, schools, climate-controlled rooms,
exhibition centers, warehouse, sports centers. The panels have fire behavior B3 grade
according to DIN 4102 and low thermal conductivity, good mechanical properties,
good dimensional stability and good adhesion to various surfaces when
WANEFOAMTM RB1024-101 reacts with WANNATE® PM-200 or PM-400 which
are the recommended isocyanates for this system. The thickness of the foamed
polyurethane core can range from 30mm to 200mm depending upon required
insulation characteristics.
As with any product, the use of the WANEFOAMTM RB1024-101 formulated polyol
in a given application must be tested (including field testing, etc.) in advance by the
user to determine suitability.
Typical Specification
Property WANEFOAMTM RB1024-101 Standard
Appearance Pale yellow liquid /
Viscosity at 25°C, cps 300 ±50 GB/T 12008.7-2010
Specific Gravity 1.15 ±0.05 ISO 2811
Water Content (%) 1.38 ±0.10 GB/T 22313-2008
Processing Conditions
WANEFOAMTM RB1024-101 system can be processed by high (or low) pressure
machine. It is essential to have equipment that consistently delivers accurate amounts
of polyol and isocyanate to be mixed to achieve a production with high performance.
Processing Parameters
Hand Mix Reactivity
Component Temperature at 21±1°C
Iso/Formulated Polyol (w/w) 120/100
Mixing Time, sec. 11±1
1/3
Cream Time, sec 32±5

Gel Time, sec 165±20
3
Free Rise Density, Kg/ m 25.0±1.5
Remark: Above data is obtained at Wanhua Rongwei’s Lab; Actual data at customer
site may be different because of test machine and condition, etc.
Typical Physical Properties (Mold temperature at 40°C)

Item Value Standard
Core Density 38-43 GB/T 6343-2009
Compressive Strength ( kPa) ≥150 GB/T 8813-2008
（%）
Volume Dimensional Stability (+80℃, 48h） ≤1.5 GB/T 8811-2008
（%）
Volume Dimensional Stability (-30℃, 48h） ≤1.0 GB/T 8811-2008
10℃ Thermal Conductivity (mW/m.K) ≤0.023 GB/T 10295-2009
Package
Iron pail with zinc coating in standard container can be obtained, IBCs, tank
containers or road tankers can also be supplied, if necessary.
Storage
The WANEFOAMTM RB1024-101 is hygroscopic and containers must be kept sealed
tightly to prevent absorption of moisture, which can adversely affect processing.
Recommended storage temperature is 15-35°C.
Shelf Life
Under recommended storage conditions, WANEFOAMTM RB1024-101 has a shelf
life of 6 months.
Safety Considerations
WANEFOAMTM RB1024-101 presents no significant hazard in use when simple
precautions are followed. However, before working with these systems it is necessary
to understand the hazards involved and follow safe work procedures.
When working with WANEFOAMTM RB1024-101, avoid contact of polyol with eyes
or skin. Safety glasses are suggested for use. Skin contaminated with WANEFOAMTM
RB1024-101 should be washed with soap and plenty of water. If WANEFOAMTM
RB1024-101 contacts eyes flush with plenty of low pressure flowing water. If
irritation occurs from contact with WANEFOAMTM RB1024-101, get medical
attention.
If the polyol is swallowed, give large amounts of water to dilute. Obtain medical
2/3
attention.
Spill and Disposal

Stop leak if you can do it without risk. For small spills, take up with sand or other
absorbent material and place into clean, dry containers for later disposal. Large spill
should be collected for disposal and then be cleaned by the rag with lye or acetone,
prevent flow to sewer / public waters. Keep unnecessary people away, isolate hazard
area and deny entry. All of the collected waste material should be handled according
to the regulation of the local environment agency.
For Further Information Please Contact Us:

WANHUA CHEMICAL (NINGBO) RONGWEI POLYURETHANE CO., LTD
Address: No. 39, Huandao North Road, Daxie Development Zone, Ningbo,
Zhejiang, 315812, P. R. China
Tel: +86-574-86756177, Fax: +86-574-86716626
Website: www.whchem.com
DISCLAIMER:
The information provided here is for reference only. The specification will be
provided in the quality certificate or in the contract. We have no control over what
another party does with the material and we cannot take any responsibility for another
party’s action. Nor we have any responsibility for any indirect damages while using
our products.
For more information, please refer to our MSDS or contact our customer service
center.
3/3

Wanefoam RB1024-101: Polyurethane Panel System

Uploaded by

Copyright:

Available Formats

Wanefoam RB1024-101: Polyurethane Panel System

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Wanefoam RB1024-101: Polyurethane Panel System

Uploaded by

Copyright:

Available Formats

TECHNICAL DATA SHEET

WANEFOAMTM RB1024-101 REVISED ON 22 JULY, 2015

Cream Time, sec 32±5

Typical Physical Properties (Mold temperature at 40°C)

Spill and Disposal

For Further Information Please Contact Us:

You might also like