Scribd
Upload
480 views6 pages

Programmable Read Only Memory Prom: Plds S

Programmable logic devices (PLDs) include programmable read only memory (PROM), programmable array logic (PAL), and programmable logic array (PLA). PROMs have a fixed AND array and programmable OR array, PALs have a programmable AND array and fixed OR array, and PLAs have both programmable AND and OR arrays, making them the most flexible PLD. These devices allow users to electrically program logic functions based on requirements by programming connections between logic gates.

Uploaded by

Shravan Kumar Namdeo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
480 views6 pages

Programmable Read Only Memory Prom: Plds S

Programmable logic devices (PLDs) include programmable read only memory (PROM), programmable array logic (PAL), and programmable logic array (PLA). PROMs have a fixed AND array and programmable OR array, PALs have a programmable AND array and fixed OR array, and PLAs have both programmable AND and OR arrays, making them the most flexible PLD. These devices allow users to electrically program logic functions based on requirements by programming connections between logic gates.

Uploaded by

Shravan Kumar Namdeo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Programmable Logic Devices 

PLDsPLDs are the integrated circuits. They contain an array of AND gates & another
array of OR gates. There are three kinds of PLDs based on the type of array ss, which
has programmable feature.

1. Programmable Read Only Memory


2. Programmable Array Logic
3. Programmable Logic Array
The process of entering the information into these devices is known as programming.
Basically, users can program these devices or ICs electrically in order to implement the
Boolean functions based on the requirement. Here, the term programming refers to
hardware programming but not software programming.

Programmable Read Only Memory PROMPROM


Read Only Memory ROMROM is a memory device, which stores the binary
information permanently. That means, we can’t change that stored information by any
means later. If the ROM has programmable feature, then it is called as Programmable
ROM PROMPROM. The user has the flexibility to program the binary information
electrically once by using PROM programmer.
PROM is a programmable logic device that has fixed AND array & Programmable OR
array. The block diagram of PROM is shown in the following figure.

Here, the inputs of AND gates are not of programmable type. So, we have to generate
2n product terms by using 2 n AND gates having n inputs each. We can implement these
product terms by using nx2n decoder. So, this decoder generates ‘n’ min terms.
Here, the inputs of OR gates are programmable. That means, we can program any
number of required product terms, since all the outputs of AND gates are applied as
inputs to each OR gate. Therefore, the outputs of PROM will be in the form of  sum of
min terms.

Example

Let us implement the following Boolean functions using PROM.


A(X,Y,Z)=∑m(5,6,7)A(X,Y,Z)=∑m(5,6,7)

B(X,Y,Z)=∑m(3,5,6,7)B(X,Y,Z)=∑m(3,5,6,7)

The given two functions are in sum of min terms form and each function is having three
variables X, Y & Z. So, we require a 3 to 8 decoder and two programmable OR gates
for producing these two functions. The corresponding PROM is shown in the following
figure.

Here, 3 to 8 decoder generates eight min terms. The two programmable OR gates
have the access of all these min terms. But, only the required min terms are
programmed in order to produce the respective Boolean functions by each OR gate.
The symbol ‘X’ is used for programmable connections.

Programmable Array Logic PALPAL


PAL is a programmable logic device that has Programmable AND array & fixed OR
array. The advantage of PAL is that we can generate only the required product terms
of Boolean function instead of generating all the min terms by using programmable
AND gates. The block diagram of PAL is shown in the following figure.

Here, the inputs of AND gates are programmable. That means each AND gate has
both normal and complemented inputs of variables. So, based on the requirement, we
can program any of those inputs. So, we can generate only the required product
terms by using these AND gates.
Here, the inputs of OR gates are not of programmable type. So, the number of inputs
to each OR gate will be of fixed type. Hence, apply those required product terms to
each OR gate as inputs. Therefore, the outputs of PAL will be in the form of sum of
products form.

Example

Let us implement the following Boolean functions using PAL.


A=XY+XZ′A=XY+XZ′
A=XY′+YZ′A=XY′+YZ′
The given two functions are in sum of products form. There are two product terms
present in each Boolean function. So, we require four programmable AND gates & two
fixed OR gates for producing those two functions. The corresponding PAL is shown in
the following figure.
The programmable AND gates have the access of both normal and complemented
inputs of variables. In the above figure, the inputs X, X′X′, Y, Y′Y′, Z & Z′Z′, are
available at the inputs of each AND gate. So, program only the required literals in order
to generate one product term by each AND gate. The symbol ‘X’ is used for
programmable connections.
Here, the inputs of OR gates are of fixed type. So, the necessary product terms are
connected to inputs of each OR gate. So that the OR gates produce the respective
Boolean functions. The symbol ‘.’ is used for fixed connections.

Programmable Logic Array PLAPLA


PLA is a programmable logic device that has both Programmable AND array &
Programmable OR array. Hence, it is the most flexible PLD. The block diagram of
PLA is shown in the following figure.
Here, the inputs of AND gates are programmable. That means each AND gate has
both normal and complemented inputs of variables. So, based on the requirement, we
can program any of those inputs. So, we can generate only the required product
terms by using these AND gates.
Here, the inputs of OR gates are also programmable. So, we can program any number
of required product terms, since all the outputs of AND gates are applied as inputs to
each OR gate. Therefore, the outputs of PAL will be in the form of sum of products
form.

Example

Let us implement the following Boolean functions using PLA.


A=XY+XZ′A=XY+XZ′
B=XY′+YZ+XZ′B=XY′+YZ+XZ′
The given two functions are in sum of products form. The number of product terms
present in the given Boolean functions A & B are two and three respectively. One
product term, Z′XZ′X is common in each function.
So, we require four programmable AND gates & two programmable OR gates for
producing those two functions. The corresponding PLA is shown in the following figure.
The programmable AND gates have the access of both normal and complemented
inputs of variables. In the above figure, the inputs X, X′X′, Y, Y′Y′, Z & Z′Z′, are
available at the inputs of each AND gate. So, program only the required literals in order
to generate one product term by each AND gate.
All these product terms are available at the inputs of each programmable OR gate.
But, only program the required product terms in order to produce the respective
Boolean functions by each OR gate. The symbol ‘X’ is used for programmable
connections.

You might also like