Produits Semi Finis Extrusal

EXHIBITOR STAND 5G78
PRESENTATION
EXTRUSAL
It has been with great commitment and dedication
RUA DO
throughout these 40 years that we have gained the trust SACABAO-
of our Clients by providing aluminium profiles with high ARADAS
quality standards. We design, manufacture and 3810-454 AVEIRO

PT
commercialise profiles in extruded aluminium for
+351 234378900
application in Architectural Projects (casement systems, www.extrusal.pt
sliding, façade, shading, coverings, guardrails and
indoor) and for Industry in general (transports, energy,
engineering, household and office equipment, amongst
others). From receiving the billets, extrusion, machining,
surface treatment, to the accompaniment of the
aluminium to its destination, each phase is lead and
guaranteed by a team of skilled specialised
professionals. Extrusal possesses three presses (1,600
tons, 1,700 tons and 2,000 tons), each one with its own
production capacity and sophistication, totalling a yearly
extrusion capacity of 15,000 tons, depending on
productivity and the type of profile. The profiles are
extruded in alloys of the 6xxx series: 6060, 6063, 6061
and 6082, in accordance with the EN 573-3 standard,
being supplied to Clients in the solicited Metallurgic
States, in accordance with the EN 755-2 standard.
MACHINING The profiles are extruded in alloys of the
6xxx series: 6060, 6063, 6061 and 6082, in accordance
with the EN 573-3 standard, being supplied to Clients in
the solicited Metallurgic States, in accordance with the
EN 755-2 standard. • Alloy EN AW-6060 [AI MgSi] –
construction profiles (frames), automotive industry and
industry in general; • Alloy EN AW-6063 [AI Mg0,7Si] –
automotive industry and transports, and industry in
general; • Alloy EN AW-6061 [AI Mg1SiCu] –
components for machines and the automotive industry

and transports, amongst others, and for industry in
general; • Alloy EN AW-6082 [AI Si1MgMn] – structural
profiles for construction, industry in general and
transports, machining of pieces for the automotive
industry. The production of other alloys and special
Metallurgic States is also possible, in accordance with
the specifications of the Client and when requested by
the Client. An increase in requests from clients for
pieces which are able to be used immediately, lead
Extrusal to implement in its production process, the
machining of some profiles for Industry. The machining
(cutting, drilling and slitting of aluminium profiles) is
carried out according to the specifications requested by
the Clients. The profiles may measure between 150 mm
and 4000 mm obtained by precision cuts, which are
later drilled by hydraulic presses dedicated to each
piece. Quality control is maintained in each step of the
process. ANODISED This is an electrolytic process
which forms an oxide coating of a determined thickness
over the aluminium alloy. In products with a decorated
surface of the aluminium profiles, two sub-treatments
are commonly used: - Polished (resulting from a
mechanical treatment); - Brushed (resulting from a
chemical treatment). This process not only gives the
profiles the natural colour of the aluminium, but also a
spectrum of colours achieved through electrolytic
colouring, which ranges from champagne to black,
passing through the bronze colours. For aluminium
profiles for architecture, the conditions for the realisation
and quality of this treatment are based on directives and
standards which the products should respect. To this
effect the entity, Qualanod, exists in Europe to manage
the equally named quality branding and certify
manufacturers (with the participation of national
inspection entities – in the case of Portugal, LNEC) so
that they may present their brand for quality recognition.
LACQUERING Thermo-adherent paint process carried
out with polyester powder paints through which the

aluminium profiles may acquire varied colours in
function of the colour of the powder used. For this
surface treatment the European entity, Qualicoat, exists
to manage the equally named quality branding and
corresponding directives, as well as certify
manufacturers (with the participation of national
inspection entities – in the case of Portugal, LNEC) so
that they may present their brand for quality recognition.
Extrusal, with this certificate (No 808) since 1995,
ensures the fulfilment of the Qualicoat directives and the
observance of the following standards: ISO 2813, NP
EN ISO 1520, NP EN ISO 2409, NP EN ISO 2815, NP
EN ISO 1519 and NP 2360. DIES FACTORY The Dies
Factory is equipped with milling machines and a CNC
lathe, electro erosion by thread and by electrode
machines, amongst others. In 2011, an additional
investment was made in state-of-the-art technology,
specifically in an electro erosion machine, in response
to the increasing market demands. The dies play an
indispensable role in the extrusion process and
therefore their quality is ensured by the manufacturing
and maintenance processes of the dies. The profiles
themselves are verified in each extrusion by individuals
responsible for the Extrusion and the Technical
Department. It is the responsibility of the Extrusion
Department to approve the equipment in accordance
with the specifics agreed upon with the Clients. In order
to guarantee conformity in the profiles supplied, the
working life of the dies is controlled through their
performance and the evaluation of the real weight of the
extruded profile in each extrusion. The increasing
complexity of the products makes the manufacture of
dies an ever more relevant step in the extrusion process
of aluminium.
PRESENTATION
Brands : EXTRUSAL
PRODUCTS AND SERVICES
EXTRUSION OF ALUMINIUM
PROFILES
MACHINING
SURFACE TREATMENTS
ANODISED AND POWDER COATING
DIES FACTORY
EXHIBITOR COMMERCIAL CONTACTS
Ana Resende
Tél:
+351234378900
aresende@extrusal
.pt
Powered by TCPDF (www.tcpdf.org)

Produits Semi Finis Extrusal

Uploaded by

Copyright:

Available Formats

Produits Semi Finis Extrusal

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Produits Semi Finis Extrusal

Uploaded by

Copyright:

Available Formats

EXHIBITOR STAND 5G78

quality standards. We design, manufacture and 3810-454 AVEIRO

sliding, façade, shading, coverings, guardrails and

indoor) and for Industry in general (transports, energy,

engineering, household and office equipment, amongst

others). From receiving the billets, extrusion, machining,

surface treatment, to the accompaniment of the

aluminium to its destination, each phase is lead and

guaranteed by a team of skilled specialised

professionals. Extrusal possesses three presses (1,600

production capacity and sophistication, totalling a yearly

extrusion capacity of 15,000 tons, depending on

productivity and the type of profile. The profiles are

extruded in alloys of the 6xxx series: 6060, 6063, 6061

and 6082, in accordance with the EN 573-3 standard,

being supplied to Clients in the solicited Metallurgic

States, in accordance with the EN 755-2 standard.

MACHINING The profiles are extruded in alloys of the

6xxx series: 6060, 6063, 6061 and 6082, in accordance

with the EN 573-3 standard, being supplied to Clients in

the solicited Metallurgic States, in accordance with the

EN 755-2 standard. • Alloy EN AW-6060 [AI MgSi] –

construction profiles (frames), automotive industry and

industry in general; • Alloy EN AW-6063 [AI Mg0,7Si] –

automotive industry and transports, and industry in

general; • Alloy EN AW-6061 [AI Mg1SiCu] –

components for machines and the automotive industry

general; • Alloy EN AW-6082 [AI Si1MgMn] – structural

profiles for construction, industry in general and

transports, machining of pieces for the automotive

industry. The production of other alloys and special

Metallurgic States is also possible, in accordance with

the specifications of the Client and when requested by

the Client. An increase in requests from clients for

pieces which are able to be used immediately, lead

Extrusal to implement in its production process, the

machining of some profiles for Industry. The machining

(cutting, drilling and slitting of aluminium profiles) is

carried out according to the specifications requested by

the Clients. The profiles may measure between 150 mm

and 4000 mm obtained by precision cuts, which are

later drilled by hydraulic presses dedicated to each

piece. Quality control is maintained in each step of the

process. ANODISED This is an electrolytic process

which forms an oxide coating of a determined thickness

over the aluminium alloy. In products with a decorated

surface of the aluminium profiles, two sub-treatments

are commonly used: - Polished (resulting from a

mechanical treatment); - Brushed (resulting from a

chemical treatment). This process not only gives the

profiles the natural colour of the aluminium, but also a

spectrum of colours achieved through electrolytic

colouring, which ranges from champagne to black,

passing through the bronze colours. For aluminium

profiles for architecture, the conditions for the realisation

and quality of this treatment are based on directives and

standards which the products should respect. To this

effect the entity, Qualanod, exists in Europe to manage

the equally named quality branding and certify