TOP LEADERS TRAINING CENTER

BUILDING SERVICES ENGINEERING PROGRAM

LEVEL FOUR EXAM
ADVANCED SYSTEMS
PATCH (26) - (JAN-JUNE/2020)
Time: 60 min

1- Which of the following L.V Systems is the BEST selection for a steel truss Factory 7000 sqm having recipient,
offices & stores?
A- CCTV, Public address, Fire alarm, Data, TV, Call, Telephone, Intrusion and Door opening
B- Call system, Intercom, Door opening, intrusion, Call, telephone, Accesses control
C- Teaching equipment’s, Sound systems, attendance, Data, CCTV, Fire alarm and gate barrier
D- Telephone, Data, CCTV, Security, fire alarm, attendance, Horn and Bells, Public address

2- Which of the following is one of the components of elevators safety systems?

A- Hoist way doors B- Governors C- Guide rails D- Sheaves

3- Which of the following devices that is used in sound system to reduces input signal variations above the threshold
level without introducing distortion?
A- Limiter B- Amplifier C- Compressor D- Mixer

4- Which of the followings is the correct arrangement for escalators?

A- Parallel and Series B- Crisscross and Parallel C- Horizontal and Vertical D- Indoor and Outdoor

5- What is called the desired condition or value of the controlled variable?

A- Control Point B- Sensed variable C- Set point D- Control loop

6- Solar system which is generates power in range of 100 to 150 watt is called?
A- Arrays B- Cells C- Modules D- Plants

7- What is the meaning of AVC device that is used in Sound system?

A- Automatic Voltage Capacity C- Attenuation & Voice Cancelling
B- Adapter of Voice Capacity D- Automatic Volume Control

8- Which of the followings temperature sensors that use resistance deference for sensing temperature?
A- RTD B- Thermocouple C- Thermistors D- Transistors

9- Data network are classified to Bus, Ring and Star According to?
A- Transmission media B- Size C- Management method D- Connectivity

10- Which of the following is one of the components of elevators output Control systems?
A- Indictors B- Sensors C- Buttons D- System Controls

11- What is called the microphone that is sensitive to sound from any direction?
A- Cardioid B- Hyper-cardioid C-Omnidirectional D- Lavalier

12- Which of the followings is Not true about DDC?

A- They are electronic control that use computer for input process C- They have software and hardware
B- They have analogue and digital input and outputs D- They have microcontroller is called Arduino
13- Which of the following is not True about elevator hoist way?
A- It is the shaft that encompasses the elevator car.
B- Generally, in most cases it serves all floors of the building.
C- Guiderails, Buffers and Governor are components of hoist way
D- A blind hoist way has no doors on the floors that it does not serve.

14- Which of the followings is not a type of control systems?

A- Electronic Analogue B- Electric control C- Hydraulic control D- Variable control

15- What is called the camera that can change its direction and zoom and controlled remotely?
A- NVR B- IP C- PTZ D- P.o.E

16- Which of the followings is not one of the components of Nurse call system?
A- Door Indicator B- Emergency call device C- Door opening D- Master Satiation

17- Which of the followings is Not true about LEED?

A- It is global certificate in Green Buildings awarded for buildings and People
B- It concerns with Water resources, Energy consumption and Data wiring
C- It classified to many rates like, Platinum, Golden and Silver
D- It initiated by United State Green Buildings Council

18- Which of the followings can be classified under both Horizontal and Vertical circulation systems?
A- Escalators B- Elevators C- Moving ramps D- Dumbwaiters

19- Which of the followings is not considered as one of the networks types?
A- LAN B- Server/Client C- NAN D- Wireless

20- Which of followings is Not true about elevators?

A- They are lifting machine that serves two floors or more
B- They are classified to hydraulic, drum and electric traction.
C- They can be classified under vertical circulations class II
D- They having cars, machine, guide rails and Landing doors

21- Which of the followings is considers as one of the L.V systems?

A- Dumbwaiters B- Public address system C- Mail chutt system D- Conveyors

22- Which of the followings places is not one of the common applications of Moving Walks?
A- Airports B- Supermarkets C- Rail terminals D- Ship terminals

23- Which of the followings is true about Microcontroller?

A- They are part of microprocessors and used to process the inputs to get the correct outputs
B- They are used to compare the inputs with the set point and determine the correct action
C- They are used with Electric Control Systems only to control and process the data and outputs
D- They use coaxial cable in all systems to receive and send signals

24- What is called the device that used to Protect opening landing doors when the elevator car leaves the floor?
A- Interlock B- Buffers C- Guide rails D- IR Sensor

25- What is called the device that is used to connect analog cameras with NVR?
A- Encoder B- P.o.E C- Switch D- Lenses

26- What is the Standard that used for Auto ramps?

A- ANSI A56.1 B- ASME B45.13 C- ANSI A17.1 D- ASME B80.36

27- Which of the followings is not one of the main parameters in selection microphones?
A- Directivity B- Resistivity C- Sensitivity D- Voice pickup response
28- Which of the followings is Not True about Networks?
A- They are two computer or more connected together
B- They used to communicate share resources between computers
C- They are used when we need to share big data and internet connection
D- They are classified according to size, connectivity, applications and mobility

29- Counter weight is equal to?

A- Car dead load + rated weight C- Rated weight + 40% of car dead load
B- 40 % of car dead load and rated weight D- Car dead load + 40% of rated weight

30- Which of the followings is not considered as one of the security systems?
A- Attendance B- CCTV C- Intrusion D- Access control

31- Which of the followings is Not true about Pneumatic tube system?
A- It is used for transport goods in buildings horizontally and vertically
B- It uses carriers for transfer samples between stations
C- It is having stations for receiving and sending goods
D- It uses guide rails and blowers for good movement

32- Charge coupled device is the device that?

A- Convert Sound to Signal B- Convert Signal to light C- Convert Signal to sound D- Convert light to signal

33- Which of the followings is true about Induction Motors?

A- They are easy to control their speed
B- They are simple in construction and easy to maintain
C- They consist of Rotor, stator and commutator
D- They are expensive and low power to weight ratio.

34- You need to control signal lamp (C) to be operated by the two relays (A)& (B) that connected to control the lamp,
the lamp must work only when the two relays are off, what is the control logic you will use?
A- A or B then C B- A and B then C C-A nor B then C D- A either B then C

35- Which of the followings are main types of Automatic Doors?

A- Folding & Revolving B- Sliding & Spring C- Swinging & stretch D- Revolving & spring

36- Which of the followings is a main deference between BAS & BMS?
A- BMS Controls the whole building systems, but BAS Controls part of building systems
B- BMS having hardware, computers, Wiring and Software, but BAS does not have software
C- BAS Control and monitor building systems, BMS is upgrade of BAS that have full access to manage all systems
D- BMS can introduce reports and manage alarms but BAS does not.

37- Which of the followings is not one of the important considerations of selection camera that used outdoor?
A- Environment B-Storage Capacity C- Lenses D- Resolution

38- Which of the followings is not one of the components of Gas turbine systems?
A- Boilers B- Combustion champers C- Turbine D-Compressors

39- Which of the followings is not one of the most common aims of using CCTV systems in Factories?
A- Security B- Video Conferences C-Man power savings D- Safety

40- Which of the followings is not advantages of BMS?

A- Provide remote control and connectivity for building systems
B- Avoid expensive failure and reduce maintenance Costs
C- Reduce design and Construction Cost, Increase life time of the systems
D- Save energy by eliminate unnecessary system operation