Scribd Logo
Upload

Welcome to Scribd!

  • 172 views

    Aluminum 6082-T6

    Uploaded by

    hardik033
    This document summarizes the composition and properties of aluminum alloy 6082-T6. It lists the typical components and their weight percentages. Key properties include a density of 2.7 g/cc, a Vickers hardness of 95, ultimate tensile strengths ranging from 290 to 310 MPa depending on wall thickness, yields strengths from 250 to 260 MPa depending on thickness, 10% elongation at break, and a thermal conductivity of 170 W/m-K. This aluminum alloy is commonly used for extrusions and its specifications are from SAPA/Indalex manuals.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Aluminum 6082-T6

    Uploaded by

    hardik033
    172 views1 page
    This document summarizes the composition and properties of aluminum alloy 6082-T6. It lists the typical components and their weight percentages. Key properties include a density of 2.7 g/cc, a Vickers hardness of 95, ultimate tensile strengths ranging from 290 to 310 MPa depending on wall thickness, yields strengths from 250 to 260 MPa depending on thickness, 10% elongation at break, and a thermal conductivity of 170 W/m-K. This aluminum alloy is commonly used for extrusions and its specifications are from SAPA/Indalex manuals.

    Original Description:

    Aluminum 6082-T6

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the composition and properties of aluminum alloy 6082-T6. It lists the typical components and their weight percentages. Key properties include a density of 2.7 g/cc, a Vickers hardness of 95, ultimate tensile strengths ranging from 290 to 310 MPa depending on wall thickness, yields strengths from 250 to 260 MPa depending on thickness, 10% elongation at break, and a thermal conductivity of 170 W/m-K. This aluminum alloy is commonly used for extrusions and its specifications are from SAPA/Indalex manuals.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    172 views1 page

    Aluminum 6082-T6

    Uploaded by

    hardik033
    This document summarizes the composition and properties of aluminum alloy 6082-T6. It lists the typical components and their weight percentages. Key properties include a density of 2.7 g/cc, a Vickers hardness of 95, ultimate tensile strengths ranging from 290 to 310 MPa depending on wall thickness, yields strengths from 250 to 260 MPa depending on thickness, 10% elongation at break, and a thermal conductivity of 170 W/m-K. This aluminum alloy is commonly used for extrusions and its specifications are from SAPA/Indalex manuals.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Aluminum 6082-T6

    Subcategory: 6000 Series Aluminum Alloy; Aluminum Alloy; Metal; Nonferrous Metal
    Close Analogs: none
    Composition Notes: Aluminum content reported is calculated as remainder. Composition information
    provided by the Aluminum Association and is not for design.
    Key Words: EU Numerical EN-AW-6082; EU Chemical AlSi1MgMn; AA6082; Sweden: SS-EN-AW-6082;
    Aluminium 6082-T6

    Component Wt. % Component Wt. % Component Wt. %

    Al 95.2 - 98.3 Mg 0.6 - 1.2 Si 0.7 - 1.3

    Cr Max 0.25 Mn 0.4 - 1 Ti Max 0.1


    Cu Max 0.1 Other, each Max 0.05 Zn Max 0.2
    Fe Max 0.5 Other, total Max 0.15

    Material Notes: Material specs taken from SAPA / Indalex manual on extrusions. Data points with the AA
    note have been provided by the Aluminum Association, Inc. and are NOT FOR DESIGN.

    Physical Properties Metric English Comments

    Density 2.7 g/cc 0.0975 lb/in³ AA; Typical

    Mechanical Properties Metric English Comments

    Hardness, Vickers 95 95

    wall thickness
    Tensile Strength, Ultimate 290 MPa 42100 psi
    < 5 mm
    wall thickness
    Tensile Strength, Ultimate 310 MPa 45000 psi
    > 5 mm
    wall thickness
    Tensile Strength, Yield 250 MPa 36300 psi
    < 5 mm
    wall thickness
    Tensile Strength, Yield 260 MPa 37700 psi
    > 5 mm
    Elongation at Break 10 % 10 %
    Thermal Properties Metric English Comments

    Thermal Conductivity 170 W/m-K 1180 BTU-in/hr-ft²-°F

    References are available for this material.

    Source: MatWeb, The Online Materials Database

    You might also like