User Manual: DV F/DV F/DV F

USER
MANUAL
DV150F/DV151F/DV155F
Click a topic This user manual includes detailed usage instructions for
your camera. Please read this manual thoroughly.
Basic troubleshooting Quick reference Contents
Basic functions Extended functions Shooting options
Playback/Editing Wireless network Settings
Appendixes Index
Downloaded from www.Manualslib.com manuals search engine

Health and safety information
Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera.
Warning—situations that could cause injury to yourself or others Prevent damage to subjects’ eyesight.
Do not use the flash in close proximity (closer than 1 m/3 ft) to people or animals.
If you use the flash too close to your subject’s eyes, you can cause temporary or
permanent eyesight damage.
Do not disassemble or attempt to repair your camera.
This may result in electric shock or damage to the camera. Keep your camera away from small children and pets.
Keep your camera and all accessories out of the reach of small children and animals.
Do not use your camera near flammable or explosive gases and liquids. Small parts may cause choking or serious injury if swallowed. Moving parts and
This may cause a ﬁre or explosion. accessories may present physical dangers as well.
Do not insert flammable materials into the camera or store these materials Do not expose the camera to direct sunlight or high temperatures for an
near the camera. extended period of time.
This may cause a ﬁre or electric shock. Prolonged exposure to sunlight or extreme temperatures can cause permanent
damage to your camera’s internal components.
Do not handle your camera with wet hands.
This may result in electric shock.

Avoid covering the camera or charger with blankets or clothes. Avoid interference with pacemakers.
The camera may overheat, which may distort the camera or cause a fire. Maintain the distance between this camera and all pacemakers to avoid potential
interference, as recommended by the manufacturer and research groups. If you
Do not handle the power supply cord or go near the charger during a have any reason to suspect that your camera is interfering with a pacemaker
thunderstorm. or other medical device, turn off the camera immediately and contact the
This may result in electric shock. manufacturer of the pacemaker or medical device for guidance.
If liquid or foreign objects enter your camera, immediately disconnect all

power sources, such as the battery or charger, and then contact a Samsung
service center.
Comply with any regulations that restrict the use of a camera in a certain area.
• Avoid interference with other electronic devices.
• Turn off the camera when in an aircraft. Your camera can cause interference with
aircraft equipment. Follow all airline regulations and turn off your camera when
directed by airline personnel.
• Turn off the camera near medical equipment. Your camera can interfere with
medical equipment in hospitals or health care facilities. Follow all regulations,
posted warnings, and directions from medical personnel.

Caution—situations that could cause damage to your camera or other When you use the AC charger, turn off the camera before you disconnect the
equipment power to the AC charger.
Failing to do so may result in fire or electric shock.
Remove the batteries from your camera when storing it for an extended period
of time. Disconnect the charger from the wall socket when not in use.
Installed batteries may leak or corrode over time and cause serious damage to your Failing to do so may result in fire or electric shock.
camera.
Do not use a damaged power supply cord, plug, or loose outlet when you
Use only authentic, manufacturer-recommended, Lithium-ion replacement charge batteries.
batteries. Do not damage or heat the battery. This may cause a fire or electric shock.
Inauthentic, damaged, or heated batteries may cause a fire or personal injury.
Do not allow the AC charger to come in contact with the +/- terminals on the
Use only Samsung-approved batteries, chargers, cables and accessories. battery.
• Using unauthorized batteries, chargers, cables or accessories can cause batteries This may cause a fire or electric shock.
to explode, damage your camera, or cause injury.
Do not drop or subject the camera to strong impacts.
• Samsung is not responsible for damage or injuries caused by unapproved
batteries, chargers, cables or accessories. Doing so may damage the screen or external or internal components.
Exercise caution when you connect cables or adapters and install batteries and
Use the battery only for its intended purpose.
memory cards.
Misusing the battery may cause a fire or electric shock.
If you force the connectors, improperly connect cables, or improperly install
Do not touch the flash while it fires. batteries and memory cards, you can damage ports, connectors, and accessories.
The flash is very hot when fired and may burn your skin.

Keep cards with magnetic strips away from the camera case. Avoid interference with other electronic devices.
Information stored on the card may be damaged or erased. Your camera emits radio frequency (RF) signals that may interfere with unshielded
or improperly shielded electronic equipment, such as pacemakers, hearing aids,
Never use a damaged charger, battery, or memory card. medical devices, and other electronic devices in homes or vehicles. Consult the
This may result in electric shock or camera malfunction or cause a fire. manufacturers of your electronic devices to solve any interference problems you
experience. To prevent unwanted interference, use only Samsung-approved devices
Do not place the camera in or near magnetic fields. or accessories.
Doing so may cause the camera to malfunction.
Use your camera in the normal position.
Do not use the camera if the screen is damaged. Avoid contact with your camera’s internal antenna.
If the glass or acrylic parts are broken, visit a Samsung Electronics Service Center to
have the camera repaired.
Data transference and your responsibilities
Check that the camera is operating properly before use. • Data transferred via WLAN can be hacked, so avoid transferring sensitive data in
The manufacturer takes no responsibility for any loss of files or damage that may public areas or on open networks.
result from camera malfunction or improper use. • The camera manufacturer is not liable for any data transfers that infringe on
copyrights, trademarks, intellectual property laws, or public decency ordinances.
You must plug the small end of the USB cable into your camera.
If the cable is reversed, it may damage your files.
The manufacturer is not responsible for any loss of data.

Outline of the User Manual
Copyright information Basic functions 18

• Microsoft Windows and the Windows logo are registered trademarks of the Learn about your camera’s layout, icons, and basic functions for
Microsoft Corporation. shooting.
• Mac and Apple App Store are registered trademarks of the Apple
Corporation. Extended functions 43
• Google Play Store is a registered trademark of Google, Inc. Learn how to capture a photo and record a video by selecting a
• microSD™, microSDHC™, and microSDXC™ are registered trademarks of the mode.
SD Association.
• Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are registered Shooting options 63
trademarks of the Wi-Fi Alliance. Learn how to set the options in Shooting mode.
• Trademarks and trade names used in this manual are the property of their
respective owners. Playback/Editing 84
Learn how to play back photos or videos, and edit photos or videos.
Also, learn how to connect your camera to your computer or TV.
• Camera specifications or contents of this manual may be changed
without prior notice due to an upgrade of the camera's functions. Wireless network 108
• We recommend using your camera within the country where you Learn to connect to wireless local area networks (WLANs) and use
purchased. functions.
• Use this camera responsibly and adhere to all laws and regulations
concerning its use. Settings 129
• You are not allowed to reuse or distribute any part of this manual Refer to options to configure your camera’s settings.
without prior permission.
Appendixes 135
Get information about error messages, specifications, and
maintenance.

Icons used in this manual Subject, background, and composition
• Subject: The main object in a scene, such as a person, animal, or still life
Icon Function
• Background: The objects around the subject
Additional information • Composition: The combination of a subject and background
Safety warnings and precautions
[] Camera buttons. For example, [Shutter] represents the shutter button. Background
() Page number of related information
The order of options or menus you must select to perform a step; for Composition
example: Select Face Detection Normal (represents Select Face Subject

Detection, and then select Normal).
* Annotation
Exposure (Brightness)
The amount of light that enters your camera determines the exposure. You can alter
Expressions used in this manual the exposure by changing the shutter speed, aperture value, or ISO sensitivity. By
altering the exposure, your photos will be darker or lighter.
Pressing the shutter
• Half-press [Shutter]: Press the shutter halfway down
• Press [Shutter]: Press the shutter all the way down
S Normal exposure S Overexposure (too bright)
Half-press [Shutter] Press [Shutter]

Special features of your camera
Using the DIRECT LINK button Setting a DIRECT LINK button option
You can select a Wi-Fi function to launch when you press the DIRECT LINK button.
1 Access Settings.
2 Access the DIRECT LINK button option.

Press the DIRECT LINK button to activate the Wi-Fi function that you have 3 Select a Wi-Fi feature from the list.
designated.

Using AutoShare
When you capture a photo with your camera, the photo is saved to the smart phone automatically. The camera connects to a smart phone wirelessly.
1 Install Samsung SMART CAMERA 4 Select the camera from the list and
App on the smart phone. connect the smart phone to the
camera.
• If a pop-up message appears on your
camera, allow the smart phone to
connect to your camera.
2 Turn on the AutoShare feature. 5 Capture a photo.

• The captured photo is saved to the camera, and then transferred to the
smart phone.
3 Launch Samsung SMART CAMERA

App on the smart phone.

Using MobileLink
You can send files easily from your camera to a smart phone. The camera connects wirelessly to smart phones that support the MobileLink feature.
camera.
2 Access the MobileLink mode. 5 On the smart phone or camera,

• If a pop-up message appears, select an select files to transfer from the
option. camera.
3 Launch Samsung SMART CAMERA 6 On the smart phone, touch the copy
App on the smart phone. button or on the camera, select
Share.

Using Remote Viewfinder

You can remotely control your camera from a smart phone. The camera connects to a smart phone wirelessly. Use the smart phone as a remote shutter release with the Remote
Viewfinder feature. The captured photo will appear on the smart phone.
camera.
2 Access the Remote Viewfinder 5 Touch and hold to focus, and

mode. then release it to capture a photo.
3 Launch Samsung SMART CAMERA

App on the smart phone. 6 Touch the thumbnail to view the
photo.
10

Shooting samples – Macro 1 Select the macro option ( ).

You can capture close up shots of small subjects, such as flowers or insects.
2 Capture a photo.
The example image may differ from the actual photo that you capture.
11

Basic troubleshooting
Learn to solve common problems by setting shooting options.
The subject’s eyes Red eye occurs when the subject's eyes reflect light from the camera flash.
appear red. • Set the flash option to Red-eye or Red-eye Fix. (p. 67)
• If the photo has already been captured, select Red-eye Fix in the edit menu. (p. 98)
Photos have dust spots. If dust particles are present in the air, you may capture them in photos when you use the flash.
• Turn off the flash or avoid capturing photos in a dusty place.
• Set ISO sensitivity options. (p. 69)
Photos are blurred. Blurring can occur if you capture photos in low light conditions or hold the camera incorrectly.
Use the DIS function or half-press [Shutter] to ensure the subject is in focus. (p. 41)
Photos are blurred when As the camera tries to let in more light, the shutter speed slows. This can make it difficult to hold the camera steady long
shooting at night. enough to capture a clear photo and may result in camera shake.
• Select Night Shot mode. (p. 55)
• Turn on the flash. (p. 67)
• Set ISO sensitivity options. (p. 69)
• Use a tripod to prevent your camera from shaking.
Subjects come out When the light source is behind the subject or when there is a high contrast between light and dark areas, the subject may
too dark because of appear too dark.
backlighting. • Avoid shooting toward the sun.
• Select Backlight in Scene mode. (p. 48)
• Set the flash option to Fill in. (p. 67)
• Adjust the exposure. (p. 75)
• Set the Auto Contrast Balance (ACB) option. (p. 76)
• Set the metering option to Spot if a subject is in the center of the frame. (p. 76)
12

Quick reference
Capturing photos of people Adjusting the exposure (brightness) Applying effects to videos
• Self Shot mode f 51 • ISO sensitivity (to adjust the sensitivity to light) f 69 • Movie Filter mode f 60
• Children mode f 52 • EV (to adjust exposure) f 75
Reducing camera shake
• Beauty Shot mode f 54 • ACB (to compensate for subjects against bright
• Beauty Palette mode f 58 backgrounds) f 76
• Metering f 76 • Digital Image Stabilization (DIS) f 39
• Red-eye/Red-eye Fix (to prevent or correct red-eye)
f 67 • AEB (to capture 3 photos of the same scene with
• Face Detection f 73 different exposures) f 79 • Viewing files as thumbnails f 86
• Viewing files by category f 87
Capturing photos at night or in the dark Capturing photos of scenery
• Deleting all files on the memory f 89
• Viewing files as a slide show f 91
• Scene mode > Sunset, Dawn f 48 • Scene mode > Landscape f 48
• Viewing files on a TV f 99
• Night Shot mode f 55 • Live Panorama mode f 49
• Connecting your camera to a computer f 100
• Flash options f 67 • Sending photos or videos via email f 121
Applying effects to photos
• ISO sensitivity (to adjust the sensitivity to light) f 69 • Using photo or video sharing websites f 123
Capturing action photos • Magic Frame mode f 57 • Adjusting sound and volume f 131
• Photo Filter mode f 59 • Adjusting the brightness of the display f 132
• Jump Shot mode f 53 • Split Shot mode f 61 • Changing the display language f 133
• Continuous, Motion Capture f 79 • Motion Photo mode f 62 • Setting the date and time f 133
• Image Adjust (to adjust Sharpness, Contrast, or • Before contacting a service center f 146
Capturing photos of text, insects, or Saturation) f 80
flowers
• Scene mode > Text f 48
• Close-up Shot mode f 56
• Macro f 70
13

Contents
Basic functions................................................................................................................. 18 Extended functions ....................................................................................................... 43

Unpacking ................................................................................................................... 19 Using Basic modes ................................................................................................... 44
Camera layout ............................................................................................................ 20 Using the Smart Auto mode ................................................................................. 44
Using the DIRECT LINK button ............................................................................. 22 Using the Program mode ...................................................................................... 45
Using the Smart Movie mode .............................................................................. 46
Inserting the battery and memory card .......................................................... 23
Using the Movie mode .......................................................................................... 47
Charging the battery and turning on your camera ..................................... 24 Using the Scene mode .......................................................................................... 48
Charging the battery ............................................................................................. 24 Using the Live Panorama mode ........................................................................... 49
Turning on your camera ........................................................................................ 24
Using Scene modes ................................................................................................. 51
Performing the initial setup ................................................................................. 25 Using the Self Shot mode ..................................................................................... 51
Learning icons ........................................................................................................... 27 Using the Children mode ...................................................................................... 52
Using the Home screen .......................................................................................... 28 Using the Jump Shot mode .................................................................................. 53
Accessing the Home screen .................................................................................. 28 Using the Beauty Shot mode ............................................................................... 54
Icons on the Home screen .................................................................................... 29 Using the Night Shot mode .................................................................................. 55
Setting Wallpaper ................................................................................................... 31 Using the Close-up Shot mode ............................................................................ 56
Selecting options or menus .................................................................................. 32 Using Magic modes ................................................................................................. 57
Using the Magic Frame mode .............................................................................. 57
Setting the display and sound ............................................................................. 34
Using the Beauty Palette mode ........................................................................... 58
Setting the display type ........................................................................................ 34
Using the Photo Filter mode ................................................................................ 59
Setting the sound ................................................................................................... 35
Using the Movie Filter mode ................................................................................ 60
Capturing photos ..................................................................................................... 36 Using the Split Shot mode .................................................................................... 61
Turning on the front display ................................................................................. 37 Using the Motion Photo mode ............................................................................ 62
Zooming .................................................................................................................. 37
Reducing camera shake (DIS) ............................................................................... 39
Tips for getting a clearer photo ........................................................................... 41
14

Contents
Shooting options............................................................................................................ 63 Using Face Detection .............................................................................................. 73

Selecting a resolution and quality ..................................................................... 64 Detecting faces ....................................................................................................... 73
Selecting a resolution ............................................................................................ 64 Capturing a smile shot ........................................................................................... 73
Selecting an image quality ................................................................................... 65 Detecting eye blinking .......................................................................................... 74
Tips for detecting faces ......................................................................................... 74
Using the timer .......................................................................................................... 66
Adjusting brightness and color ........................................................................... 75
Shooting in the dark ................................................................................................ 67
Adjusting the exposure manually (EV) ............................................................... 75
Preventing red-eye ................................................................................................. 67
Compensating for backlighting (ACB) ................................................................ 76
Using the flash ........................................................................................................ 67
Changing the metering option ............................................................................ 76
Adjusting the ISO sensitivity ................................................................................. 69
Selecting a White Balance setting ....................................................................... 77
Changing the camera’s focus ............................................................................... 70
Using burst modes ................................................................................................... 79
Using macro ............................................................................................................ 70
Changing the focus option ................................................................................... 70 Adjusting images ..................................................................................................... 80
Adjusting the focus area ....................................................................................... 71 Reducing the sound of the zoom ....................................................................... 81
Available shooting options by shooting mode ............................................. 82
15

Contents
Playback/Editing............................................................................................................. 84 Wireless network .......................................................................................................... 108

Viewing photos or videos in Playback mode ................................................. 85 Connecting to a WLAN and configuring network settings ..................... 109
Starting Playback mode ........................................................................................ 85 Connecting to a WLAN ........................................................................................ 109
Viewing photos ....................................................................................................... 89 Using the login browser ...................................................................................... 111
Playing a video ........................................................................................................ 92 Network connection tips .................................................................................... 112
Editing a photo .......................................................................................................... 95 Entering text .......................................................................................................... 113
Resizing photos ...................................................................................................... 95 Saving files to a smart phone automatically ................................................ 114
Rotating a photo .................................................................................................... 95 Sending photos or videos to a smart phone ................................................ 115
Applying Smart Filter effects ................................................................................ 96
Using a smart phone as a remote shutter release ...................................... 116
Adjusting your photos ........................................................................................... 97
Using Auto Backup to send photos or videos .............................................. 118
Viewing files on a TV ............................................................................................... 99
Installing the program for Auto Backup on your PC ....................................... 118
Transferring files to the computer ................................................................... 100 Sending photos or videos to a PC ..................................................................... 118
Transferring files to your Windows OS computer ........................................... 100
Sending photos or videos via email ................................................................ 120
Transferring files to your Mac OS computer .................................................... 101
Changing email settings ..................................................................................... 120
Using programs on a computer ........................................................................ 102 Sending photos or videos via email .................................................................. 121
Installing i-Launcher ............................................................................................ 102
Using photo or video sharing websites ......................................................... 123
Using i-Launcher .................................................................................................. 103
Accessing a website ............................................................................................. 123
Uploading photos or videos ............................................................................... 123
Using AllShare Play to send files ....................................................................... 125
Uploading photos to online storage ................................................................. 125
Viewing photos or videos on devices that support AllShare Play ................ 126
Sending photos using Wi-Fi Direct .................................................................. 128
16

Contents
Settings ............................................................................................................................. 129

Settings menu ......................................................................................................... 130
Accessing the settings menu ............................................................................. 130
Sound ..................................................................................................................... 131
Display .................................................................................................................... 131
Connectivity .......................................................................................................... 132
General ................................................................................................................... 133
Appendixes ..................................................................................................................... 135

Error messages ........................................................................................................ 136
Camera maintenance ............................................................................................ 137
Cleaning your camera .......................................................................................... 137
Using or storing the camera ............................................................................... 138
About memory cards ........................................................................................... 139
About the battery ................................................................................................. 142
Before contacting a service center ................................................................... 146
Camera specifications ........................................................................................... 149
Glossary ..................................................................................................................... 153
Index ........................................................................................................................... 158
17

Basic functions
Learn about your camera’s layout, icons, and basic functions for shooting.
Unpacking ……………………………………… 19 Selecting options or menus …………………… 32

Camera layout …………………………………… 20 Setting the display and sound ………………… 34
Using the DIRECT LINK button ………………… 22 Setting the display type ………………………… 34
Inserting the battery and memory card ……… 23 Setting the sound ……………………………… 35
Charging the battery and turning on your Capturing photos ……………………………… 36
camera …………………………………………… 24 Turning on the front display …………………… 37
Charging the battery …………………………… 24 Zooming ……………………………………… 37
Turning on your camera ……………………… 24 Reducing camera shake (DIS) ………………… 39
Performing the initial setup …………………… 25 Tips for getting a clearer photo ………………… 41
Learning icons …………………………………… 27
Using the Home screen ………………………… 28
Accessing the Home screen …………………… 28
Icons on the Home screen ……………………… 29
Setting Wallpaper ……………………………… 31

Unpacking
The following items are included in your product box.
Optional accessories
Camera AC adapter/USB cable
Camera case A/V cable
Rechargeable battery Strap
Battery charger Memory card/Memory card adapter
Quick Start Guide

• The illustrations may differ slightly from the items shipped with your product.
• The items included in the box may differ depending on the model.
• You can purchase optional accessories at a retailer or a Samsung service center.
Samsung is not responsible for any problems caused by using unauthorized
accessories.
Basic functions 19

Camera layout
Before you start, familiarize yourself with your camera’s parts and their functions.
Power button
Shutter button Microphone
Front LCD button

Flash Speaker
AF-assist light/Timer lamp
Front display Internal antenna*

* Avoid contact with the internal antenna while using the
wireless network.
Lens
USB and A/V port

Tripod mount Accepts USB cable and A/V cable
Battery chamber cover

Insert a memory card and battery
Basic functions 20

Camera layout
Zoom button
• In Shooting mode: Zoom in or out
• In Playback mode: Zoom in on part of a photo, view files
as thumbnails, or adjust the volume
Status lamp
• Blinking: When the camera is saving a
photo or video, being read by a computer, Attaching the strap
when the image is out of focus, there is a
problem charging the battery, or when the
camera is connecting to WLAN or sending x
a photo
• Steady: When the camera is connected to a y
computer, charging the battery, or when the
image is in focus Main display
Buttons
(See the table below)
Button Description Button Description

Start a preset Wi-Fi function. (p. 22) Basic functions Other functions
Access the Home screen. (p. 28) D Change the display option. Move up
c Change the macro option. Move down
Access options or menus.
F Change the flash option. Move left
Enter Playback mode. t Change the timer option. Move right
Delete files in Playback mode. Confirm the highlighted option or menu.
Basic functions 21

Camera layout
Using the DIRECT LINK button Setting a DIRECT LINK button option
You can turn on the Wi-Fi feature conveniently with [x]. Press [x] to activate the You can select a Wi-Fi function to launch when you press [x].
Wi-Fi function that you have designated. Press [x] again to return to the previous
mode. 1 On the Home screen, scroll to <Basic>.
2 Select .
3 Select General DIRECT LINK (Wi-Fi Button).
4 Select an option. (p. 134)
Basic functions 22

Inserting the battery and memory card
Learn how to insert the battery and an optional memory card into the camera.
Removing the battery and memory card
Slide the lock up to release the

Battery lock battery.
Rechargeable battery
Insert a memory card with the gold-
colored contacts facing up. Push the card gently until it disengages
from the camera, and then pull it out of
the slot.
Memory card
Memory card
Insert the battery with the Samsung logo
facing up.
You can use the internal memory for temporary storage if a memory card is not
inserted.
Rechargeable battery
Basic functions 23

Charging the battery and turning on your camera
Charging the battery Turning on your camera

Before you use the camera for the first time, you must charge the battery. Plug the Press [X] to turn your camera on or off.
small end of the USB cable into your camera, and then plug the other end of the • The initial setup screen appears when you turn on
USB cable into the AC adapter. the camera for the first time. (p. 25)
Status lamp Turning on your camera in Playback mode

• Red light on: Charging
• Red light off: Fully charged Press [P]. The camera turns on and immediately
• Red light blinking: Error accesses Playback mode.
Use only the AC adapter and USB cable supplied with your camera. If you use
another AC adapter (such as SAC-48), the camera battery may not charge or work
properly.
Basic functions 24

Performing the initial setup
When the initial setup screen appears, follow the steps below to configure the camera’s basic settings. The default language is preset for the country or region where the camera
is sold. You can change the language as desired by selecting Language.
1 Press [c] to select Time Zone, and then press [t] or [o]. 4 Press [c] to select Date/Time Set, and then press [t] or [o].
2 Press [D/c] to select Home, and then press [o]. Date/Time Set
• When you travel to another country, select Visit, and then select a new time
zone. Year Month Day Hour Min DST
3 Press [F/t] to select a time zone, and then press [o] [m].
Time Zone : Home
Cancel Set
• The screen may differ depending on the language selected.

London 5 Press [F/t] to select an item.
Cancel Set 6 Press [D/c] to set the date, time, and daylight-saving time, and
then press [o].
• The screen may differ depending on the language selected.
Basic functions 25

Performing the initial setup
7 Press [c] to select Date Type, and then press [t] or [o].
8 Press [D/c] to select a date type, and then press [o].
9 Press [c] to select Time Type, and then press [t] or [o].
10 Press [D/c] to select a time type, and then press [o].
11 Press [m] to finish the initial setup.
Basic functions 26

Learning icons
The icons the camera displays on the screen change according to the mode you select or the options you set. If you change a shooting option, the corresponding icon will blink
briefly in yellow.
1 2 Shooting options (right) Icon Description

Icon Description Front display is on
Intelli zoom on Available number of photos
Photo resolution Memory card inserted
2
Video resolution • : Fully charged
• : Partially charged
Metering • : Empty (Recharge)
Frame rate • : Charging (Connected with the
3 Flash
charger)
Aperture value
1 Shooting options (left) Sound Alive on
Shutter speed
Icon Description Digital Image Stabilization (DIS)
Available recording time
Shooting mode Focus option
Auto focus frame
Image adjustment (sharpness, contrast,
Exposure value adjusted Camera shake
and saturation)
ISO sensitivity Timer Zoom indicator
White balance Photo resolution when the Intelli
3 Shooting information zoom is on
Face detection
Zoom ratio
Face tone Icon Description
Current date
Burst option
Current time
AutoShare on
Basic functions 27

Using the Home screen
You can select a shooting mode or access the settings menu by selecting the icons on the Home screen.
Accessing the Home screen No. Description

In Shooting or Playback mode, press [h]. Press [h] again to return to the Current Home screen
previous mode. • Rotate [Zoom] to the left or right to switch to another Home screen.
1 • Press [D] to scroll to the Home screen name, and then press [F/t]
to switch to another Home screen.
• Press [F/t] repeatedly to switch to another Home screen.
Mode icons
2 • Press [D/c/F/t] to scroll to a desired mode, and then press [o]
to access the mode.
1
Album Basic Wi-Fi
Smart Auto Program Smart Movie Movie

2
Scene Live Settings

Panorama
Back Page Move
Basic functions 28

Icons on the Home screen <Wi-Fi>

<Basic> Icon Description
Icon Description MobileLink: Send photos or videos to a smart phone. (p. 115)
Smart Auto: Capture a photo with a scene mode selected Remote Viewfinder: Use a smart phone as a remote shutter release
automatically by the camera. (p. 44) and see a preview on your smart phone of an image from your
Program: Capture a photo with settings you have adjusted manually. camera. (p. 116)
(p. 45) Auto Backup: Send photos or videos that you captured with the
Smart Movie: Record a video with a scene mode selected camera to a PC wirelessly. (p. 118)
automatically by the camera. (p. 46)
Email: Send photos or videos stored on the camera via email. (p. 120)
Movie: Record a video. (p. 47)
SNS & Cloud: Upload photos or videos to file sharing websites.
Scene: Capture a photo with options that are preset for a specific (p. 123)
scene. (p. 48) AllShare Play: Upload photos to AllShare Play online storage or view
Live Panorama: Capture and combine a series of photos to create a files on devices that support AllShare Play. (p. 125)
panoramic image. (p. 49)
Settings: Adjust settings to match your preferences. (p. 130)
Basic functions 29

<Scene> <Magic>
Icon Description Icon Description
Self Shot: Use the front display when you capture a self portrait. Magic Frame: Capture a photo with various frame effects. (p. 57)
(p. 51)
Children: Attract children’s attention with a short animation on the Beauty Palette: Capture a portrait, and then add various beautifying
front display. (p. 52) effects. (p. 58)
Jump Shot: Let your subjects know the best moment to jump with a Photo Filter: Capture a photo with various filter effects. (p. 59)
countdown on the front display. (p. 53)
Movie Filter: Record a video with various filter effects. (p. 60)
Beauty Shot: Capture a portrait with options to hide facial
imperfections. (p. 54) Split Shot: Capture several photos and arrange them with preset
layouts. (p. 61)
Night Shot: Capture a night scene by adjusting shutter speed. (p. 55)
Motion Photo: Capture and combine a series of photos, and then
Close-up Shot: Capture close-up photos of subjects. (p. 56) select an area to be animated to create a GIF animation. (p. 62)
<Album>
Icon Description
Album: View files as thumbnails. (p. 86)
Photo Editor: Edit photos with various effects. (p. 95)
Basic functions 30

Setting Wallpaper 5 Scroll to the desired wallpaper, and then press [o].
Set wallpaper for the Home screen with the desired image. • If you select a photo you have captured, you can set a specified area as
wallpaper. Rotate [Zoom] to the left or right to reduce or enlarge the area.
1 On the Home screen, scroll to <Basic>. Press [D/c/F/t] to move the area.
2 Select . 6 Press [o] to save.
• If you select a photo you have captured, press [o], and then select Yes.
3 Select Display Wallpapers.
4 Select an option. You can also set the photo you are viewing as wallpaper by pressing [m], and
then selecting Set Wallpaper in Playback mode.
Option Description
Wallpaper Gallery Select the desired wallpaper from the default gallery.
Album Set a photo you have captured as wallpaper.
Basic functions 31

Selecting options or menus
To select an option or a menu, press [m], and then press [D/c/F/t] or [o].
1 In Shooting mode, press [m]. Going back to the previous menu
2 Select an option or a menu. Press [m] to go back to the previous menu.

• To move up or down, press [D] or [c].
• To move left or right, press [F] or [t]. Half-press [Shutter] to return to Shooting mode.
3 Press [o] to confirm the highlighted option or menu.
Basic functions 32

Selecting options or menus
For example, to select a White Balance option in Program mode: 4 Press [D/c] to select White Balance, and then press [t] or
[o].
1 On the Home screen, scroll to <Basic>.
AutoShare
2 Select .
EV
3 Press [m]. White Balance
AutoShare ISO
EV Flash
White Balance Focus
ISO Exit Select
Flash
Focus 5 Press [F/t] to select a White Balance option.

Exit Select
White Balance : Daylight
Back Select
6 Press [o] to save your settings.
Basic functions 33

Setting the display and sound
Learn how to change the basic display information and sound settings.
Setting the display type Setting the option display view

You can select a display type for the Shooting or Playback mode. Each type displays You can hide or show the option display appearing in some modes.
different shooting or playback information. See the table below.
Press [o] repeatedly.
• Hide the option display.
• Show the option display.
Landscape
Option display
Press [D] repeatedly to change the display type. Panel off
S For example, in Scene mode

Mode Display type
• Hide all information about shooting options.
Shooting
• Show all information about shooting options.
• Hide all information about the current file.
• Hide all information about the current file except basic
Playback
information.
• Show all information about the current file.
Basic functions 34

Setting the display and sound
Setting the sound

Turn on or off the sound your camera emits when you perform functions.

2 Select .
3 Select Sound Beep Sound.
4 Select an option.
Option Description
Off The camera does not emit any sounds.
On The camera emits sounds.
Basic functions 35

Capturing photos
Learn how to capture photos easily and quickly in Smart Auto mode.
1 On the Home screen, scroll to <Basic>. 5 Press [Shutter] to capture a photo.

2 Select . 6 Press [P] to view the captured photo.
• To delete the photo, press [f], and then select Yes.
3 Align your subject in the frame.
7 Press [P] to return to Shooting mode.
See page 41 for tips to get clearer photos.
4 Half-press [Shutter] to focus.

• A green frame means the subject is in focus.
• A red frame means the subject is out of focus.
Basic functions 36

Capturing photos
Turning on the front display Zooming

The front display helps you capture photos while viewing yourself. You can capture close-up photos by adjusting the zoom.
In Shooting mode, press [F.LCD].

• Press [F.LCD] again to turn it off.
Zoom ratio
• Several buttons are not available when the front display turns on. Zoom out Zoom in
• In Self Shot, Children, and Jump Shot modes, the front display will activate
automatically.
• When you set timer options, the front display will remain active. (p. 66)
• When you use the camera in brightly lit or sunny areas, you may not be able to
see the front display clearly. When you rotate the zoom button, the zoom ratio shown on the screen may
• The front display will not activate when you press [F.LCD] in Playback mode. change inconsistently.
• When the front display is on, the camera consumes more battery power.
Basic functions 37

Capturing photos
Digital zoom Intelli zoom

The Digital zoom is supported by default in Shooting mode. If you zoom in on If the zoom indicator is in the Intelli range, your camera is using the Intelli zoom.
a subject in Shooting mode and the zoom indicator is in the digital range, your Photo resolution varies according to the zoom rate if you use the Intelli zoom. By
camera is using the Digital zoom. By using both the 5X Optical zoom and 5X Digital using both the Optical zoom and Intelli zoom, you can zoom in up to 10 times.
zoom, you can zoom in up to 25 times.
Photo resolution
Optical range when the Intelli
Optical range zoom is on
Zoom indicator
Zoom indicator
Digital range
Intelli range
• Digital zoom is not available with the Tracking AF option.
• If you capture a photo with the Digital zoom, the photo quality may be lower • Intelli zoom is not available with the Tracking AF option.
than normal.
• The Intelli zoom helps you capture a photo with less quality deterioration than
the Digital zoom. However, the photo quality may be lower than when you use
the Optical zoom.
• The Intelli zoom is available only when you set a 4:3 resolution ratio. If you set
another resolution ratio with Intelli zoom on, the Intelli zoom will be turned off
automatically.
• The Intelli zoom is always on in Smart Auto mode.
Basic functions 38

Capturing photos
Setting Intelli zoom Reducing camera shake (DIS)

Reduce camera shake digitally in Shooting mode.
1 In Shooting mode, press [m].
2 Select Intelli Zoom.
3 Select an option.
Icon Description
Off: The Intelli zoom is deactivated.
On: The Intelli zoom is activated.
S Before correction S After correction

2 Select DIS.
3 Select an option.
Icon Description
Off: DIS is deactivated.
On: DIS is activated.
Basic functions 39

Capturing photos
• DIS may not function properly when:

- you move your camera to follow a moving subject
- you use the Digital zoom
- there is too much camera shake
- the shutter speed is slow (for example, when you capture night scenes)
- the battery is low
- you capture a close-up shot
• If the camera is hit or dropped, the display will be blurry. If this occurs, turn off
the camera, and then turn it on again.
Basic functions 40

Tips for getting a clearer photo
Holding your camera correctly Reducing camera shake

Ensure nothing is blocking the lens, Set the Digital Image Stabilization option to reduce camera
flash, or microphone. shake digitally. (p. 39)
When is displayed
Half-pressing the shutter button
Half-press [Shutter] and adjust the focus. The camera

adjusts the focus and exposure automatically.
Camera shake
When you shoot in the dark, avoid setting the flash option to Slow Sync or Off. The
The camera sets the aperture value and shutter aperture remains open longer and it may be harder to hold the camera steady long
speed automatically. enough to capture a clear photo.
• Use a tripod or set the flash option to Fill in. (p. 67)
Focus frame • Set ISO sensitivity options. (p. 69)
• Press [Shutter] to capture the photo if the
focus frame appears in green.
• Change the composition and half-press
[Shutter] again if the focus frame appears in
red.
Basic functions 41

Preventing your subject from being out of focus
It may be difficult to get your subject in focus when: • When you capture photos in low light
- there is little contrast between the subject and background (for example, when
your subject is wearing clothing that is similar in color to the background) Turn on the flash.
- the light source behind the subject is too bright (p. 67)
- the subject is shiny or reflective
- the subject includes horizontal patterns, such as blinds
- the subject is not positioned in the center of the frame
• When subjects are moving rapidly
Use the Continuous

or Motion Capture
function. (p. 79)
Using the focus lock
Half-press [Shutter] to focus. When the subject is in focus, you can
reposition the frame to change the composition. When you are ready,
press [Shutter] to capture your photo.
Basic functions 42

Extended functions
Learn how to capture a photo and record a video by selecting a mode.
Using Basic modes ……………………………… 44 Using Magic modes ……………………………… 57

Using the Smart Auto mode …………………… 44 Using the Magic Frame mode ………………… 57
Using the Program mode ……………………… 45 Using the Beauty Palette mode ………………… 58
Using the Smart Movie mode ………………… 46 Using the Photo Filter mode …………………… 59
Using the Movie mode ………………………… 47 Using the Movie Filter mode …………………… 60
Using the Scene mode ………………………… 48 Using the Split Shot mode ……………………… 61
Using the Live Panorama mode ……………… 49 Using the Motion Photo mode ………………… 62
Using Scene modes ……………………………… 51
Using the Self Shot mode ……………………… 51
Using the Children mode ……………………… 52
Using the Jump Shot mode …………………… 53
Using the Beauty Shot mode ………………… 54
Using the Night Shot mode …………………… 55
Using the Close-up Shot mode ………………… 56

Using Basic modes
Capture photos or record videos using basic modes. You can also use the Scene mode and the Live Panorama mode.
Using the Smart Auto mode Icon Description

In Smart Auto mode, your camera automatically chooses the appropriate camera Portraits at night
settings based on the type of scene it detects. The Smart Auto mode is helpful if you
are not familiar with the camera settings for various scenes. Landscapes with backlighting
1 On the Home screen, scroll to <Basic>. Portraits with backlighting
2 Select . Portraits
Close-up photos of objects
3 Align your subject in the frame.
• The camera automatically selects a scene. An appropriate scene icon appears Close-up photos of text
at the top left of the screen. The icons are listed below.
Sunsets
Indoors, dark
Partially lit
Close-up with spot lighting
Portraits with spot lighting
Blue skies
Forested areas
Close-up photos of colorful subjects
Icon Description Camera is stabilized on a tripod and the subject is not moving for
Landscapes a certain period of time. (when shooting in the dark)
Scenes with bright white backgrounds Actively moving subjects
Landscapes at night Fireworks (when using a tripod)
Extended functions 44

Using Basic modes
4 Half-press [Shutter] to focus. Using the Program mode

5 Press [Shutter] to capture the photo. In Program mode, you can set most options, except the shutter speed and aperture
value, which the camera sets automatically.
• If the camera does not recognize an appropriate scene mode, it uses the default
settings for Smart Auto mode. 1 On the Home screen, scroll to <Basic>.
• Even if it detects a face, the camera may not select a portrait mode depending
on the subject's position or lighting.
2 Select .
• The camera may not select the correct scene depending on the shooting 3 Set the desired options.
conditions, such as camera shake, lighting, or distance to the subject. • For a list of options, refer to "Shooting options". (p. 63)
• Even if you use a tripod, the camera may not detect the mode if the subject
is moving.
• The camera consumes more battery power, because it changes settings often to
select appropriate scenes.
4 Align your subject in the frame, and then half-press [Shutter] to

focus.
5 Press [Shutter] to capture the photo.

Using Basic modes
Using the Smart Movie mode Icon Description

In Smart Movie mode, your camera automatically chooses the appropriate camera Landscapes
settings based on the scene it has detected. This mode is available only when you
insert a memory card into the camera. Sunsets
1 On the Home screen, scroll to <Basic>. Blue skies
2 Select . Forested areas
3 Align your subject in the frame. 4 Press [Shutter] to start recording.

• The camera automatically selects a scene. An appropriate scene icon will
appear at the top left of the screen. 5 Press [Shutter] again to stop recording.
• If the camera does not recognize an appropriate scene mode, it uses the default
settings for Smart Movie mode.
• The camera may not select the correct scene depending on the shooting
conditions, such as camera shake, lighting, and distance to the subject.

Using Basic modes
Using the Movie mode 1 On the Home screen, scroll to <Basic>.

In Movie mode, you can customize settings to record HD videos of up to 20 minutes
in length. The camera saves recorded videos as MP4 (H.264) files. This mode is
2 Select .
available only when you insert a memory card into the camera. 3 Set desired options.
• For a list of options, refer to "Shooting options". (p. 63)
• H.264 (MPEG-4 part10/AVC) is a high-compression video format established by
the international standards organizations ISO-IEC and ITU-T. 4 Press [Shutter] to start recording.
• If you use memory cards with slow write speeds, the camera may not save videos
properly. Video recordings may be corrupted or fail to play back correctly. 5 Press [Shutter] again to stop recording.
• Memory cards with slow writing speeds will not support high-resolution videos.
To record high-resolution videos, use memory cards with faster write speeds.
• If you use the zoom function when recording a video, the camera may record
the noise of the zoom operating. To decrease zoom noise, use the Sound Alive
function. (p. 81)

Using Basic modes
Pause recording Using the Scene mode

The camera allows you to temporarily pause a video while recording. With this In Scene mode, you can capture a photo with options that are preset for a specific
function, you can record separate scenes as a single video. scene.

2 Select .
3 Select a scene.
• Press [o] to pause while recording. Landscape

• Press [o] to resume.
Panel off

Using Basic modes
Option Description Using the Live Panorama mode

Landscape Capture still-life scenes and landscapes. In Live Panorama mode, you can capture a wide panoramic scene in a single photo.
Capture scenes at sunset, with natural-looking reds and Capture and combine a series of photos to create a panoramic image.
Sunset
yellows.
Dawn Capture scenes at sunrise.
Backlight Capture backlit subjects.
Reduce underexposure of subjects caused by sunlight
Beach & Snow
reflected from sand or snow. S Shooting example
Text Clearly capture text from printed or electronic documents.
4 Align your subject in the frame, and then half-press [Shutter] to 2 Select .
focus.
5 Press [Shutter] to capture the photo. focus.
• Align the camera with the far left or the far right, or very top or bottom, of the
scene you want to capture.
4 Press and hold [Shutter] to start shooting.

Using Basic modes
5 With [Shutter] pressed, slowly move the camera in the direction that • For best results when capturing panoramic photos, avoid the following:
will let it capture the rest of the panorama. - moving the camera too quickly or too slowly
• Arrows toward the direction of motion are displayed, and the entire shooting - moving the camera too little to capture the next image
image is displayed in the preview box. - moving the camera at irregular speeds
- shaking the camera
• When the scenes are aligned, the camera captures the next photo - shooting in dark places
automatically. - capturing moving subjects nearby
- shooting conditions where the brightness or color of light is changing
• Photos taken are automatically saved, and shooting is stopped under the
following conditions:
- if you change the shooting direction while shooting
- if you move the camera too rapidly
- if you don't move the camera
• Selecting Live Panorama mode will disable the digital and optical zoom
functions. If you select Live Panorama mode while the lens is zoomed in, the
camera automatically zooms out to the default position.
• Some shooting options are not available.
• The camera may stop shooting due to the shooting composition or movement
within the scene.
6 When you are finished, release [Shutter]. • Your camera may not capture the last scene in its entirety if you stop moving the
• When you have captured all the necessary shots, the camera combines them camera exactly where you want the scene to end. To capture the entire scene,
into one panoramic photo. move your camera slightly beyond the point where you want the scene to end.

Using Scene modes
Capture photos by using the front display or selecting appropriate modes for various scenes.
Using the Self Shot mode Capturing an Easy Self Shot

Conveniently capture photos of yourself with the front display. If you press [F.LCD] when the power is off, the front display turns on in Easy Self
Shot mode. Because the main display is off, the camera consumes less battery
1 On the Home screen, scroll to <Scene>. power and you can prevent others from viewing the main display.
• The camera will turn off when you press [F.LCD] again or press [X].
2 Select .
• The front display will turn off and the main display will turn on when you press
• Your camera will automatically detect your face and display a frame to
[h].
indicate the detected face.
In this mode, you cannot use [m] or [D/c/F/t] to set shooting options.
3 Half-press [Shutter] to focus.

The front display will activate automatically.

Using Scene modes
Customizing the front display Using the Children mode

You can let subjects know when to smile or attract their attention to the lens. The Children mode attracts children by showing a short animation on the front
display.
1 In Self Shot mode, press [m].
2 Select Half Shutter an option. 1 On the Home screen, scroll to <Scene>.
Half Shutter
2 Select .
• The front display will activate and play the preset animation.
Off
Smile Icon 3 Press [m].
Eyesight catching
4 Select Background Music an option.
focus.
Back Select 6 Press [Shutter] to capture the photo.
Icon Description You can download animations for the front display from i-Launcher. (p. 103)
Off: No icon will appear on the front display.
Smile Icon: Set an icon to appear that prompts the subject to
smile.
Eyesight catching: Set an icon to appear to attract the subject’s
attention to the lens.

Using Scene modes
Using the Jump Shot mode 4 Jump when the jump icon appears on the front display.
Capture a photo of people jumping. An icon will appear on the front display to tell • The camera will capture multiple shots.
your subjects when to jump.
• If you are capturing photos using the jump shot timer in low light conditions or
indoors, photos may appear dark.
1 On the Home screen, scroll to <Scene>.
2 Select .
• To capture animated jump shots, refer to "Capturing animated jump shots".
(p. 54)
3 Press [Shutter].
• The AF-assist light/timer lamp blinks.
• The front display will start a countdown a few seconds before shooting.

Using Scene modes
Capturing animated jump shots Using the Beauty Shot mode

Capture multiple jump shots, and then save them as a GIF animation. This feature is In Beauty Shot mode, you can capture a portrait with options to hide facial
available only when you insert a memory card into the camera. imperfections.
1 In Jump Shot mode, press [m]. 1 On the Home screen, scroll to <Scene>.
2 Select Jump Shot GIF animation. 2 Select .
• If you select GIF animation, the resolution is automatically set to . 3 Press [F/t] to adjust Face Retouch.
• If you select GIF animation, it may take longer to save files. • For example, increase the face retouch setting to hide more imperfections.
Face Retouch : 2
Panel off
4 Press [m].
5 Select Face Tone.

Using Scene modes
6 Press [F/t] to adjust Face Tone. Using the Night Shot mode
• For example, increase the face tone setting to make skin appear lighter. In Night Shot mode, you can use a slow shutter speed to extend the time the
shutter stays open. Increase the aperture value to prevent overexposure.

2 Select .
Face Tone : 2
3 Press [F/t] to adjust the shutter speed.
Cancel Set
7 Press [o] to save the setting. Shutter Speed : 1 sec

focus.
Panel off
focus.
Use a tripod to prevent blurry photos.

Using Scene modes
Using the Close-up Shot mode

In Close-up Shot mode, you can capture close-up photos of subjects, such as
flowers or insects.

2 Select .
focus.

Using Magic modes
Capture a photo or record a video with various effects.
Using the Magic Frame mode 4 Align your subject in the frame, and then half-press [Shutter] to
In Magic Frame mode, you can apply various frame effects to your photos. The focus.
shape and the feel of the photos will change according to the frame you select.
1 On the Home screen, scroll to <Magic>.
The resolution is automatically set to .
2 Select .
3 Select a desired frame.
Wall Art
Panel off

Using Magic modes
Using the Beauty Palette mode • To apply beautifying effects to saved photos, press [m], and then select
In Beauty Palette mode, capture a portrait, and then add various beautifying effects. Open Image a desired image.
• If the camera fails to detect a face in the photo, you cannot use Beauty Palette
1 On the Home screen, scroll to <Magic>. mode.
• The camera is only able to detect one face at a time. If there is more than one
2 Select . face in the photo, select a face to apply a beauty effect.
• Depending on the subject’s facial structure, the camera may not recognize the
subject’s face.
focus. • When an image is rotated, the camera can recognize a subject’s face only when
4 Press [Shutter] to capture a photo. the angle of the face is 90° or 270° from normal orientation.
• If you rotate the camera while shooting or a subject's face is rotated, the camera
5 Press [o]. may not recognize the subject's face.
• To recapture a photo, press [m]. • To increase the face recognition rate, the subject’s face size should be bigger
than 1/12 of the screen.
6 Select a beauty effect.
Normal
Exit Save
7 Press [o] to save the photo.

Using Magic modes
Using the Photo Filter mode Option Description

Apply various filter effects to your photos to create unique images. Apply a tilt-shift effect to make the subject appear in
Miniature miniature. (The top and bottom of the photo will be
blurred.)
Apply the retro-looking colors, high contrast, and strong
Vignetting
vignette effect of Lomo cameras.
Ink Painting Apply a watercolor painting effect.
Oil Painting Apply an oil painting effect.
Cartoon Apply a cartoon painting effect.
Miniature Vignetting
Add lines that radiate outward from bright objects to
Cross Filter
imitate the visual effect of a cross filter.
Sketch Apply a pen sketch effect.
Soft Focus Hide facial imperfections or apply dreamy effects.
Distort close objects to imitate the visual effect of a fisheye
Fish-eye
lens.
Old Film Apply a vintage film effect.
Fish-eye Sketch Half Tone Dot Apply a halftone effect.
Classic Apply a black and white effect.
1 On the Home screen, scroll to <Magic>. Retro Apply a sepia tone effect.
2 Select . Zooming Shot

Blur the edges of a photo to emphasize the subjects in the
center.
3 Select an effect.

Using Magic modes
4 Align your subject in the frame, and then half-press [Shutter] to Option Description
focus. Half Tone Dot Apply a halftone effect.
5 Press [Shutter] to capture a photo. Sketch Apply a pen sketch effect.
Distort close objects to imitate the visual effect of a
• Depending on the option you select, the resolution may change to or smaller Fish-eye
fisheye lens.
automatically.
• To apply filter effects to saved photos, press [m], and then select Open
Image a desired image. Retro Apply a sepia tone effect.
Palette Effect 1 Create a vivid look with sharp contrast and strong color.
Palette Effect 2 Make scenes clean and clear.
Palette Effect 3 Apply a soft brown tone.
Palette Effect 4 Create a cold and monotone effect.
Using the Movie Filter mode
Apply various filter effects to your videos to create unique images. This mode is
available only when you insert a memory card into the camera. 4 Press [Shutter] to start recording.
1 On the Home screen, scroll to <Magic>. 5 Press [Shutter] again to stop recording.
• If you select Miniature, playback speed will increase.
2 Select .
• If you select Miniature, you cannot record sound in the video.
3 Select an effect. • Depending on the option you select, the recording resolution may change to
or smaller automatically.
Option Description
Apply a tilt-shift effect to make the subject appear in
Miniature miniature. (The top and bottom of the video will be
blurred.)
Apply the retro-looking colors, high contrast, and strong
Vignetting

Using Magic modes
Using the Split Shot mode 4 Align your subject in the frame, and then half-press [Shutter] to
In Split Shot mode, you can capture several photos and arrange them with preset focus.
layouts.
5 Press [Shutter] to capture a photo.
1 On the Home screen, scroll to <Magic>. • Repeat steps 4 and 5 to capture the rest of the photos.
• To recapture a photo, press [f].
2 Select .
• The resolution is automatically set to or smaller.
3 Select a split style.
• The available zoom range may be less than in other shooting modes.
• To adjust the sharpness of the dividing line, press [m], and then select
Line Blur a desired value.
• To apply a Smart Filter effect to part of the shot, press [m], and then
select Smart Filter a desired option. You can apply different Smart Filter
effects to each part of the shot.
Panel off

Using Magic modes
Using the Motion Photo mode 6 Rotate [Zoom] to the left or right to reduce or enlarge the area.
In Motion Photo mode, you can capture and combine a series of photos, and then
select an area to be animated to create a GIF animation. This mode is available only
when you insert a memory card into the camera.
1 On the Home screen, scroll to <Magic>.

2 Select .
3 Align your subject in the frame, and then half-press [Shutter] to Frame Size
focus. Cancel Save

• The camera captures multiple photos while the status lamp is blinking. 7 Press [o] to save the photo.
5 Press [D/c/F/t] to scroll to an area to be animated. • The resolution is automatically set to .
• To recapture a photo, press [m]. • Use a tripod to prevent your camera from shaking.
• It may take longer to save files.

Shooting options
Learn how to set the options in Shooting mode.
Selecting a resolution and quality …………… 64 Adjusting brightness and color ………………… 75
Selecting a resolution ………………………… 64 Adjusting the exposure manually (EV) ………… 75
Selecting an image quality …………………… 65 Compensating for backlighting (ACB) ………… 76
Using the timer ………………………………… 66 Changing the metering option ………………… 76
Shooting in the dark …………………………… 67 Selecting a White Balance setting ……………… 77
Preventing red-eye …………………………… 67 Using burst modes ……………………………… 79
Using the flash ………………………………… 67 Adjusting images ………………………………… 80
Adjusting the ISO sensitivity …………………… 69 Reducing the sound of the zoom ……………… 81
Changing the camera’s focus …………………… 70 Available shooting options by shooting
Using macro …………………………………… 70 mode ……………………………………………… 82
Changing the focus option …………………… 70
Adjusting the focus area ……………………… 71
Using Face Detection …………………………… 73
Detecting faces ………………………………… 73
Capturing a smile shot ………………………… 73
Detecting eye blinking ………………………… 74
Tips for detecting faces ………………………… 74

Selecting a resolution and quality
Learn how to change the image resolution and quality settings.
Selecting a resolution Setting the video resolution

As you increase the resolution, your photo or video will include more pixels, so it
can be printed on larger paper or displayed on a larger screen. When you use a high 1 In Video Shooting mode, press [m].
resolution, the file size will also increase.
2 Select Movie Size.
Setting the photo resolution 3 Select an option.
Icon Description
1280 X 720: HD files to play back on an HDTV.
2 Select Photo Size.
640 X 480: SD files to play back on an analog TV.
3 Select an option.
320 X 240: Post on a web page.
Icon Description
For Sharing: Post on a website using the wireless network
4608 X 3456: Print on A1 paper. (30 seconds maximum).
4608 X 3072: Print on A1 paper in wide ratio (3:2).
4608 X 2592: Print on A1 paper in panorama ratio (16:9) or play
back on an HDTV.
3648 X 2736: Print on A2 paper.
1920 X 1080: Print on A5 paper in panorama ratio (16:9) or play
back on an HDTV.
1024 X 768: Attach to an email.
Shooting options 64

Selecting a resolution and quality
Selecting an image quality

Set a photo quality setting. Higher image quality settings will result in larger file
sizes. The camera compresses and saves the photos you capture in the JPEG format.

2 Select Quality.
3 Select an option.
Icon Description
Super Fine: Capture photos in super high quality.
Fine: Capture photos in high quality.
Normal: Capture photos in normal quality.
Shooting options 65

Using the timer
Learn how to set the timer to delay shooting.
1 In Shooting mode, press [t]. 3 Press [Shutter] to start the timer.

• The AF-assist light/timer lamp blinks. The camera will automatically capture a
photo after the specified time has elapsed.
• The front display will start a countdown before shooting.
Timer
Off • Press [Shutter] or [t] to cancel the timer.
10 Sec • Depending on the Face Detection options you selected, the timer function may
2 Sec not be available.
Double • Timer options are not available if you set burst options.
• In some modes, you can also set the timer option by pressing [m], and then
Exit Select selecting Timer.
2 Select an option.
Icon Description
Off: The timer is not active.
10 Sec: Capture a photo after a 10-second delay.
2 Sec: Capture a photo after a 2-second delay.
Double: Capture one photo after a 10-second delay and another
photo after a 2-second delay.
Available options may differ depending on the shooting conditions.
Shooting options 66

Shooting in the dark
Learn how to capture photos at night or in low light conditions.
Preventing red-eye Using the flash

When the flash fires when you capture a photo of a person in the dark, a red glow Use the flash when you capture photos in the dark or when you need more light in
may appear in the person’s eyes. To prevent this, select Red-eye or Red-eye Fix. your photos.
Refer to flash options in "Using the flash."
1 In Shooting mode, press [F].
Flash
Off
Auto
Red-eye
Fill in
S Before correction S After correction Slow Sync
Red-eye Fix
Exit Select
2 Select an option.
Icon Description
Off:
• The flash will not fire.
• The camera will display the shake warning when you are
shooting in low light.
Auto: The camera will select a proper flash setting for the scene it
detects in Smart Auto mode.
Shooting options 67

Icon Description • Flash options are not available if you set burst options or select Blink Detection.
Auto: The flash will fire automatically when the subject or • Make sure that your subjects are within the recommended distance from the
background is dark. flash. (p. 150)
• If light from the flash is reflected or there is a substantial amount of dust in the
Red-eye: air, tiny spots may appear in your photo.
• The flash will fire twice when the subject or background is dark • In some modes, you can also set the flash option by pressing [m], and then
to reduce the red-eye effect. selecting Flash.
• There is an interval between the 2 bursts of the flash. Do not
move until the flash fires a second time.
Fill in:
• The flash always fires.
• The camera automatically adjusts light intensity.
Slow Sync:
• The flash fires and the shutter stays open longer.
• This option is recommended when you want to capture more
ambient light to reveal more details in the background.
• Use a tripod to prevent your photos from blurring.
• The camera will display the shake warning when you are
shooting in low light.
Red-eye Fix:
• The flash fires twice when the subject or background is dark.
The camera corrects red-eyes through its advanced software
analysis.
• There is an interval between the 2 bursts of the flash. Do not
move until the flash fires a second time.
Shooting options 68

Adjusting the ISO sensitivity

The ISO sensitivity is the measure of a film’s sensitivity to light as defined by the
International Organization for Standardization (ISO). The higher ISO sensitivity you
select, the more sensitive to light your camera becomes. Use a higher ISO sensitivity
to capture better photos and reduce camera shake when not using the flash.

2 Select ISO.
3 Select an option.
• Select to use an appropriate ISO sensitivity based on the brightness of
the subject and lighting.
Higher ISO sensitivities may result in more image noise.
Shooting options 69

Changing the camera’s focus
Learn how to adjust the camera’s focus to suit the subject and the shooting conditions.
Using macro Changing the focus option

Use macro to capture close-up photos of subjects, such as flowers or insects. (Refer You can get clearer photos by selecting an appropriate focus option according to
to "Changing the focus option".) the distance between the camera and subjects.
1 In Shooting mode, press [c].
Focus
Normal (AF)
Macro
Exit Select
• Try to hold the camera firmly to prevent blurry photos.

• Turn off the flash if the distance to the subject is less than 40 cm.
Shooting options 70

2 Select an option. Adjusting the focus area

Icon Description You can get clearer photos by selecting an appropriate focus area according to your
Normal (AF): Focus on a subject farther than 31 in. (80 cm) away. subject's location in the scene.
Farther than 98 in. (250 cm) away when you use the zoom.
Macro: Focus on a subject that is 2–31 in. (5–80 cm) from the
camera. 39–98 in. (100–250 cm) when you use the zoom. 2 Select Focus Area.
Auto Macro: 3 Select an option.
• Focus on a subject farther than 2 in. (5 cm) away. Farther than
Icon Description
39 in. (100 cm) away when you use the zoom.
• Auto Macro is set automatically in some modes. You cannot set Center AF: Focus on the center of the frame (suitable when
it manually. subjects are located at or near the center).

Multi AF: Focus on one or more of 9 possible areas.
Tracking AF: Focus on and track the subject. (p. 72)
In some modes, you can also set the focus option by pressing [m], and then
selecting Focus. Available shooting options may differ depending on the shooting conditions.
Shooting options 71

Using tracking auto focus • If you do not select a focus area, the focus frame will appear in the center of the
Tracking AF allows you to track and automatically focus on your subject, even when screen.
you are moving. • Tracking a subject may fail when:
- the subject is too small
1 In Shooting mode, press [m]. - the subject moves excessively
- the subject is backlit or you are shooting in a dark place
2 Select Focus Area Tracking AF. - colors or patterns on the subject and the background are the same
- the subject includes horizontal patterns, such as blinds
3 Focus on the subject you want to track, and then press [o]. - the camera shakes excessively
• A focus frame appears on the subject and follows the subject as you move • When tracking fails, the feature will be reset.
the camera. • If the camera fails to track the subject, you must reselect the subject to track.
• If the camera fails to focus, the focus frame will change to red and the focus will
be reset.
• If you use this function, you cannot set Face Detection options, Timer options,
Burst options, and Intelli zoom.
• The white frame means that your camera is tracking the subject.
• When you half-press [Shutter], the green frame means that your subject is in
focus.
• The red frame means that your camera failed to focus.
Shooting options 72

Using Face Detection
If you use Face Detection options, your camera can automatically detect a human face. When you focus on a human face, the camera adjusts the exposure automatically. Use
Blink Detection to detect closed eyes or Smile Shot to capture a smiling face.
Detecting faces Capturing a smile shot

Your camera automatically detects up to 10 human faces in one scene. The camera automatically releases the shutter when it detects a smiling face.
1 In Shooting mode, press [m]. 1 In Shooting mode, press [m].

2 Select Face Detection Normal. 2 Select Face Detection Smile Shot.
3 Compose your shot.
• The camera automatically releases the shutter when it detects a smiling face.
The face nearest the camera or nearest

the center of the scene appears in a
white focus frame and the rest of the
faces appear in gray focus frames.
The closer you are to the subjects, the quicker your camera will detect faces.
When your subject smiles
broadly, your camera can detect
the smile more easily.
Shooting options 73

Using Face Detection
Detecting eye blinking Tips for detecting faces

If your camera detects closed eyes, it will automatically capture 2 photos in • When your camera detects a face, it tracks the detected face automatically.
succession. • Face Detection may not be effective when:
- the subject is far from the camera (The focus frame will appear orange for Smile
Shot and Blink Detection.)
2 Select Face Detection Blink Detection. - it is too bright or too dark
- the subject is not facing the camera
- the subject is wearing sunglasses or a mask
- the subject’s facial expression changes drastically
- the subject is backlit or the lighting conditions are unstable
• When you set Face Detection options, the AF area is automatically set to Multi AF.
• Depending on the Face Detection options you selected, some shooting options
may not be available.
• Depending on the shooting options you selected, Face Detection options may
not be available.
Shooting options 74

Adjusting brightness and color
Learn how to adjust the brightness and color for better image quality.
Adjusting the exposure manually (EV) 3 Press [F/t] to adjust the exposure.
Depending on the intensity of the ambient light, your photos may be too bright or • The photo will be brighter as the exposure value increases.
dark. In these cases, you can adjust the exposure to get a better photo.
EV : 0
Cancel Set
S Darker (-) S Neutral (0) S Brighter (+)

1 In Shooting mode, press [m]. • Once you adjust the exposure, the setting will be stored automatically. You
2 Select EV. may need to change the exposure value later to avoid overexposure or
underexposure.
• If you cannot decide on an appropriate exposure, select the AEB (Auto Exposure
Bracket) option. The camera will capture 3 consecutive photos, each with a
different exposure: normal, underexposed, and overexposed. (p. 79)
Shooting options 75

Compensating for backlighting (ACB) Changing the metering option

When the light source is behind your subject or there is high contrast between your The metering mode refers to the way in which a camera measures the quantity
subject and the background, your subject is likely to appear dark in the photo. In of light. The brightness and lighting of your photos will vary depending on the
this case, set the Auto Contrast Balance (ACB) option. metering mode you select.

2 Select Metering.
3 Select an option.
Icon Description
Multi:
• Your camera divides the frame into several areas, and then
measures the light intensity of each area.
S Without ACB S With ACB
• Suitable for general photos.
1 In Shooting mode, press [m]. Spot:
• Your camera measures only the light intensity at the very center
2 Select ACB. of the frame.
• If a subject is not in the center of the frame, your photo may be
3 Select an option.
improperly exposed.
Icon Description • Suitable for a subject with backlighting.
Off: ACB (Auto Contrast Balance) is deactivated. Center-weighted:
On: ACB (Auto Contrast Balance) is activated. • Your camera averages the meter reading of the entire frame
with emphasis placed on the center.
• Suitable for photos with subjects in the center of the frame.
• The ACB feature is always on in Smart Auto mode.
• The ACB feature is not available when you set Burst options.
Shooting options 76

Selecting a White Balance setting 1 In Shooting mode, press [m].

The color of your photo depends on the type and quality of the light source. If you
want the color of your photo to be realistic, select a White Balance setting that
2 Select White Balance.
is appropriate for the lighting conditions, such as Auto WB, Daylight, Cloudy, or 3 Select an option.
Tungsten. Icon Description
Auto WB: Automatically set the White Balance based on the
lighting conditions.
Daylight: For outdoor photos on a sunny day.
Cloudy: For outdoor photos on a cloudy day or in shadows.
Fluorescent_H: For shooting under a daylight fluorescent or
3-way fluorescent light.
Auto WB Daylight
Fluorescent_L: For shooting under white fluorescent light.
Tungsten: For shooting indoor photos under incandescent bulbs
or halogen lamps.
Custom Set: To use White Balance settings that you define. (p. 78)
Cloudy Tungsten
Shooting options 77

Defining your own White Balance

You can customize the White Balance by capturing a photo of a white surface, such
as a piece of paper, under the lighting conditions in which you intend to capture a
photo. The White Balance feature will help you to match the colors in your photo
with the actual scene.

2 Select White Balance Custom Set.
3 Aim the lens at a piece of white paper, and then press [Shutter].
Shooting options 78

Using burst modes
It can be difficult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. Also, it can be difficult to adjust the
exposure correctly and select a proper light source. In these cases, select one of the burst modes.
Icon Description
Motion Capture: While you are pressing [Shutter], the camera
captures photos (5 photos per second; maximum of
30 photos).
AEB:
• Capture 3 consecutive photos, each with a different exposure:
normal, underexposed, and overexposed.
• It may take longer to capture the photo. Use a tripod for best
1 In Shooting mode, press [m]. results.
2 Select Drive.
• You can use the flash, timer, and ACB only when you select Single.
3 Select an option. • When you select Motion Capture, your camera will set the resolution to
Icon Description and set the ISO sensitivity to Auto.
• Depending on the Face Detection option you selected, some Burst options may
Single: Capture a single photo. not be available.
Continuous: • It may take longer to save the photos depending on the memory card capacity
• While you are pressing [Shutter], the camera continuously and performance.
captures photos.
• The maximum number of photos depends on the capacity of
your memory card.
Shooting options 79

Adjusting images
Adjust the sharpness, contrast, or saturation of your photos.
1 In Shooting mode, press [m]. 4 Press [F/t] to adjust each value.

2 Select Image Adjust. Sharpness Description
Soften the edges on your photos (suitable for editing the
3 Select an option. –
photos on your computer).
• Sharpness Sharpen the edges to improve the clarity of your photos. (This
• Contrast +
may also increase the noise in your photos.)
• Saturation
Contrast Description
– Decrease the color and brightness.
Image Adjust + Increase the color and brightness.
Sharpness
Saturation Description
Contrast
– Decrease the saturation.
Saturation + Increase the saturation.
Cancel Set
Select 0 if you do not want to apply any effects (suitable for printing).
Shooting options 80

Reducing the sound of the zoom
When you use the zoom while recording videos, the camera can record the sound of the zoom. Use the Sound Alive function to reduce the zoom noise.
1 In Video Shooting mode, press [m].

2 Select Voice.
3 Select an option.
Icon Description
Sound Alive On: Turn on the Sound Alive function to reduce the
zoom noise.
Sound Alive Off: Turn off the Sound Alive function.
The camera can record the zoom noise.
Mute: Do not record sounds.
• Do not block the microphone when you use the Sound Alive function.
• Recordings made with Sound Alive may differ from actual sounds.
Shooting options 81

Available shooting options by shooting mode
For details about shooting options, refer to "Shooting options". (p. 63)
Smart Auto Program Smart Movie Movie Scene Live Panorama Self Shot Children Jump Shot
Resolution O O O O O O O O O
Quality O O - - O O O O O
Timer O O O O O - - O O
Flash O O - - O - O O -
ISO sensitivity - O - - - - - - -
Macro O O O O O - O - -
Focus area - O - - - - - O -
Face detection O O - - O - O O -
EV - O - O - - - - -
ACB O O - - - O O - -
Metering - O - O - - - - -
White balance - O - O - - - - -
Drive - O - - - - - O -
Image adjust - O - - - - - - -
Sound Alive - - O O - - - - -
Digital zoom - O - - O - - - -
Intelli zoom O O - - O - - - -
DIS - O - - - - - - -
O: The option is available. Some options may be limited or may not be changeable.
-: The option is not available.
Shooting options 82

Available shooting options by shooting mode
Beauty Shot Night Shot Close-up Shot Magic Frame Beauty Palette Photo Filter Movie Filter Split Shot Motion Photo
Resolution O O O O O O O O O
Quality O O O O O O - O O
Timer O O O O O O O O O
Flash O O - O O O - O -
ISO sensitivity - - - - - - - - -
Macro O - O - - - - - O
Focus Area - - - - - - - - -
Face detection O - - - O - - - -
EV - - - - - - - - -
ACB - - - - - - - - O
Metering - - - - - - - - -
White balance - - - - - - - - -
Drive - - - - - - - - -
Image adjust O - - - - - - - -
Sound Alive - - - - - - O - -
Digital zoom - - - - - - - - -
Intelli zoom - - - - - - - - -
DIS - - - - - - - - -
O: The option is available. Some options may be limited or may not be changeable.
-: The option is not available.
Shooting options 83

Playback/Editing
Learn how to play back photos or videos, and edit photos or videos. Also, learn how to connect your camera to
your computer or TV.
Viewing photos or videos in Playback mode … 85 Viewing files on a TV …………………………… 99

Starting Playback mode ……………………… 85 Transferring files to the computer …………… 100
Viewing photos ………………………………… 89 Transferring files to your Windows OS
Playing a video ………………………………… 92 computer ……………………………………… 100
Editing a photo ………………………………… 95 Transferring files to your Mac OS computer …… 101
Resizing photos ………………………………… 95 Using programs on a computer ……………… 102
Rotating a photo ……………………………… 95 Installing i-Launcher …………………………… 102
Applying Smart Filter effects …………………… 96 Using i-Launcher ……………………………… 103
Adjusting your photos ………………………… 97

Viewing photos or videos in Playback mode
Learn how to play back photos or videos and how to manage files.
Starting Playback mode Photo file information

View photos or play videos stored in your camera.
Memory in use
1 Press [P].
• The most recent file will be displayed.
• If the camera is off, it will turn on and display the most recent file.
2 Press [F/t] to scroll through files. File Information
• Press and hold [F/t] to scroll through files quickly.
• If you want to view files stored in the internal memory, remove your memory Album/Zoom In
card.
• You may not be able to edit or play back files that were captured with other Icon Description
cameras, due to unsupported sizes (image size, etc) or codecs. Use a computer
or another device to edit or play back these files. Current file/Total files
• Photos or videos captured in portrait orientation do not rotate automatically and
are displayed in landscape orientation by the camera and other devices. Folder name–File name
GIF file
Protected file
To display file information on the screen, press [D].
Playback/Editing 85

Video file information Viewing files as thumbnails

Scan thumbnails of files.
In Playback mode, rotate [Zoom] to the left to view thumbnails

(12 at a time). Rotate [Zoom] to the left once more to display more
thumbnails (24 at a time). Rotate [Zoom] to the right to return to the
previous view.
File Information
Album
Play Capture
Icon Description
Current file/Total files
Folder name-File name
Current playback time Menu
Video length
• You can also view files as thumbnails by scrolling to <Album> on the Home
Protected file screen, and then selecting .
Press [D/c/F/t] to scroll through files.

To display file information on the screen, press [D].
Playback/Editing 86

Viewing files by category 4 Scroll to a desired list, and then press [o] to open the list.
View files by category, such as date or file type.
5 Scroll to a desired file, and then press [o] to view the file.
1 In Playback mode, rotate [Zoom] to the left. 6 Rotate [Zoom] to the left, and then press [m] to return to the
• You can also view files as thumbnails by scrolling to <Album> on the Home previous view.
screen, and then selecting .
2 Press [m]. If you change the category, it may take some time for the camera to reorganize
files depending on the number of files.
3 Select Filter a category.
Filter
All
Date
File Type
Back Select
Icon Description
All: View files normally.
Date: View files by the date they were saved.
File Type: View files by the file type.
Playback/Editing 87

Protecting a file Deleting multiple files

Protect a file from accidental deletion. You can select multiple files, and then delete them at once.
1 In Playback mode, select a file to protect. 1 In Playback mode, press [f].

• When in thumbnails view, press [m], select Delete Select, and then
2 Press [m], and then select Protect On. skip to step 3, or press [f], select Select, and then skip to step 3.
3 Repeat steps 1 and 2 to protect additional files. 2 When the pop-up message appears, select Multiple Delete.
You cannot resize, delete, or rotate a protected file. 3 Scroll to each file you want to delete, and then press [o].
• Press [o] again to cancel your selection.
4 Press [f].
Deleting files 5 When the pop-up message appears, select Yes.

Select files to delete in Playback mode.
Deleting a single file

You can select one file, and then delete it.
1 In Playback mode, select a file, and then press [f].

2 When the pop-up message appears, select Yes.
You can also delete files in Playback mode by pressing [m], and then selecting
Delete Delete Yes.
Playback/Editing 88

Deleting all files Viewing photos

You can select all files, and then delete them at once. Enlarge part of a photo or view photos as a slide show.
1 In Playback mode, press [m].
Enlarging a photo
• When in thumbnails view, press [m], select Delete Delete All, and
then skip to step 3, or press [f], select Delete All, and then skip to step 3.
2 Select Delete Delete All. In Playback mode, rotate [Zoom] to the right to enlarge a portion of
the photo. Rotate [Zoom] to the left to zoom out.
• All unprotected files are deleted.
Copying files to a memory card Enlarged area

Copy files from the internal memory to a memory card.
1 In Playback mode, press [m].

2 Select Copy to Card.
Crop
Playback/Editing 89

To Description Viewing panoramic photos

Move the enlarged area Press [D/c/F/t]. View photos captured in Live Panorama mode.
Trim the enlarged photo

Press [o], and then select Yes.
(The trimmed photo will be saved as a new file. The
1 In Playback mode, press [F/t] to scroll to a desired panoramic
original photo is retained in its original form.)
photo.
• The entire panoramic photo appears on the screen.
When you view photos that were captured by another camera, the zoom ratio may 2 Press [o].
differ. • The camera automatically scrolls through the photo from left to right for a
horizontal panoramic photo and from top to bottom for a vertical panoramic
photo. The camera then switches to Playback mode.
• While playing back a panoramic photo, press [o] to pause or resume.
• After you have paused the playback of a panoramic photo, press
[D/c/F/t] to move the photo horizontally or vertically, depending on
the direction you moved when capturing the photo.
3 Press [m] to return to Playback mode.

The camera automatically scrolls through the panoramic photo only if the longest
side of the photo is two or more times longer than the shortest side.
Playback/Editing 90

Viewing animated photos Playing a slide show

View animated GIF files repeatedly that were captured in Motion Photo mode or Apply effects and audio to a slide show of your photos. The slide show function
Jump Shot mode. does not work for videos and GIF files.
1 In Playback mode, press [F/t] to scroll to a desired GIF file. 1 In Playback mode, press [m].
2 Press [o]. 2 Select Slide Show Options.
• The GIF file plays back repeatedly.
3 Select a slide show effect option.
3 Press [o] to return to Playback mode. • Skip to step 4 to start a slide show with no effects.
* Default
Option Description
Play Mode Set whether or not to repeat the slide show. (One Play*, Repeat)
• Set the interval between photos. (1 sec*, 3 sec, 5 sec, 10 sec)
Interval
• You must set the Effect option to Off to set the interval.
Music Set background audio.
• Set a scene change effect between photos. (Off, Calm*, Shine,
Relax, Lively, Sweet)
Effect • Select Off to cancel effects.
• When you use the Effect option, the interval between photos
will be set to 1 second.
Playback/Editing 91

4 Press [m]. Playing a video

5 Select Start Slide Show. In Playback mode, you can view a video, and then capture or trim parts of the
playing video. You can save the captured or trimmed segments as new files.
6 View the slide show.
• Press [o] to pause the slide show. 1 In Playback mode, select a video, and then press [o].
• Press [o] again to resume the slide show. 2 View the video.
• Press [o], and then press [F/t] to stop the slide show and return to Playback
mode. Current playback time/
• Rotate [Zoom] to the left or right to adjust the volume level. Video length
Pause Stop
Playback/Editing 92

To Description Trimming a video

Press [F]. Each time you press [F], you
Scan backward change the scan speed in this order: 2X, 4X, 1 In Playback mode, select a video, and then press [m].
8X. 2 Select Trim Movie.
Pause or resume playback Press [o].
Press [t]. Each time you press [t], you
3 Press [o] to start playing the video.
Scan forward change the scan speed in this order: 2X, 4X, 4 Press [o] [c] at the point where you want the trimming to
8X. begin.
Adjust the volume level Rotate [Zoom] to the left or right.
5 Press [o] to resume playing the video.
When playing a movie, you can begin using features such a scanning backward, 6 Press [o] [c] at the point where you want the trimming to end.
scanning forward, or pausing after the video has run for 2 seconds.
7 Press [c] to trim.
• The original video should be at least 10 seconds long.
• The camera will save the edited video as a new file and leave the original video
intact.
Playback/Editing 93

Capturing an image from video
1 While viewing a video, press [o] at the point where you want to
capture an image.
2 Press [c].
• The resolution of the captured image will be the same as the original video.
• The captured image is saved as a new file.
Playback/Editing 94

Editing a photo
Learn how to edit photos.
• The camera will save edited photos as new files.
• When you edit photos, the camera will automatically convert them to a lower resolution. Photos that you rotate or resize manually are not automatically converted to a lower
resolution.
• Photos captured in some modes cannot be edited.
Resizing photos Rotating a photo

Change the size of a photo and save it as a new file.
1 On the Home screen, scroll to <Album>.
1 In Playback mode, select a photo, and then press [m].
2 Select .
2 Select Resize.
3 Rotate [Zoom] to the left, and then select a photo.
3 Select an option.
4 Select Rotate an option.
Resize
2592 X 1944 5 Press [c] to save.
1984 X 1488
1024 X 768
Rotate : Right 90˚

Back Select
Cancel Save
Available resize options differ depending on the original size of the photo.
• The camera will overwrite the original file.

• In Playback mode, press [m], and then select Rotate to rotate a photo.
Playback/Editing 95

Editing a photo
Applying Smart Filter effects Option Description

Apply special effects to your photos. Apply the retro-looking colors, high contrast, and strong
Vignetting
Ink Painting Apply a watercolor painting effect.
2 Select . Oil Painting Apply an oil painting effect.
3 Rotate [Zoom] to the left, and then select a photo. Cartoon Apply a cartoon painting effect.
Add lines that radiate outward from bright objects to
4 Select Smart Filter an option. Cross Filter
imitate the visual effect of a cross filter.
Sketch Apply a pen sketch effect.
Soft Focus Hide facial imperfections or apply dreamy effects.
Distort close objects to imitate the visual effect of a fisheye
Fish-eye
lens.
Smart Filter : Miniature
Old Film Apply a vintage film effect.
Half Tone Dot Apply a halftone effect.
Back Set Retro Apply a sepia tone effect.
Blur the edges of a photo to emphasize the subjects in the
Option Description Zooming Shot
center.
Normal No effect
Miniature
Apply a tilt-shift effect to make the subject appear in
miniature. (The top and bottom of the photo will be
5 Press [c] to save.
blurred.)
Playback/Editing 96

Editing a photo
Adjusting your photos 5 Press [F/t] to adjust the option.

Learn how to adjust the brightness, contrast, or saturation or how to correct the
red-eye effect. If the center of a photo is dark, you can adjust it to be brighter.
6 Press [o].
The camera will save an edited photo as a new file, but may convert it to a lower 7 Press [c] to save.
resolution.
• You can adjust brightness, contrast, and saturation and apply Smart Filter effects
at the same time.
Adjusting dark subjects (ACB)
• You cannot apply the ACB, Face Retouch, and Red-eye Fix effects at the same
time. 1 On the Home screen, scroll to <Album>.
2 Select .
Adjusting brightness, contrast, or saturation 3 Rotate [Zoom] to the left, and then select a photo.
1 On the Home screen, scroll to <Album>. 4 Select ACB.
2 Select . 5 Press [c] to save.

4 Select an adjusting option.
Icon Description
Brightness
Contrast
Saturation
Playback/Editing 97

Editing a photo
Retouching faces

2 Select .
4 Select Face Retouch.
5 Press [F/t] to adjust the option.
• As the number increases, the skin tone becomes brighter and smoother.
Removing red-eye

2 Select .
4 Select Red-eye Fix.
Playback/Editing 98

Viewing files on a TV
Play back photos or videos by connecting your camera to a TV with the A/V cable.
1 On the Home screen, scroll to <Basic>. 7 Turn on your TV, and then select the A/V video source.
2 Select . 8 Turn on your camera.
• The camera automatically enters into Playback mode when you connect it to
3 Select Connectivity Video Out. a TV.
4 Select the video signal output for your country or region. (p. 132)
9 View photos or play videos using the camera buttons.
5 Turn off your camera and TV.
• Depending on the TV model, you may see some digital noise or part of an image
6 Connect your camera to your TV with the A/V cable. may not appear.
• Images may not be centered on the TV screen depending on your TV settings.
Audio Video
Playback/Editing 99

Transferring files to the computer
Connect the camera to a computer to transfer files from the camera's memory card to the computer.
Transferring files to your Windows OS computer 6 Turn on the camera.

Connect the camera to your computer as a removable disk. • The computer recognizes the camera automatically.
Your computer must be running Windows XP, Windows Vista, Windows 7, or 7 On your computer, select My Computer Removable Disk
Windows 8 for you to connect the camera as a removable disk. DCIM 100PHOTO.
8 Drag or save files to your computer.
2 Select . Disconnecting the camera (for Windows XP)
3 Select Connectivity i-Launcher Off. With Windows Vista, Windows 7, and Windows 8, the methods for disconnecting the
camera are similar.
4 Turn off the camera.
5 Connect the camera to your computer with the USB cable.
1 If the status lamp on your camera is blinking, wait until it stops.
You must plug the small end of the USB cable into your camera. If the cable is
2 Click on the tool bar at the bottom right of your computer screen.
reversed, it may damage your files. The manufacturer is not responsible for any
loss of data.
3 Click the pop-up message.

4 Click the message box that indicates the camera can be removed
safely.
5 Remove the USB cable.
Playback/Editing 100

Transferring files to the computer
Transferring files to your Mac OS computer 3 Turn on the camera.

When you connect the camera to your Mac OS computer, the computer will • The computer recognizes the camera automatically and displays a removable
automatically recognize the device. You can transfer files directly from the camera to disk icon.
the computer without installing any programs.
4 Double-click the removable disk icon.
Mac OS 10.5 or later is supported. 5 Drag or save files to your computer.

2 Connect your camera to your Mac OS computer with the USB cable.
You must plug the small end of the USB cable into your camera. If the cable is
reversed, it may damage your files. The manufacturer is not responsible for any
loss of data.

Using programs on a computer
i-Launcher allows you to playback files with Multimedia Viewer and provides links so that you can download useful programs.
Installing i-Launcher 6 Turn on the camera.
1 On the Home screen, scroll to <Basic>. 7 When the pop-up window prompts you to install i-Launcher, select
Yes.
2 Select . • If a pop-up window prompting you to run iLinker.exe appears, run it first.
3 Select Connectivity i-Launcher On. • When you connect the camera to a computer with i-Launcher installed, the
program will launch automatically.
8 Follow the on-screen instructions to complete the installation.
5 Connect the camera to your computer with the USB cable. • An i-Launcher shortcut will appear on the computer.
You must plug the small end of the USB cable into your camera. If the cable is • Before installing the program, ensure that the PC is connected to a network.
reversed, it may damage your files. The manufacturer is not responsible for any • To install i-Launcher on your Mac OS computer, click Devices i-Launcher
loss of data. Mac iLinker.

Available programs when using i-Launcher Using i-Launcher

Option Description i-Launcher allows you to play back files with Multimedia Viewer and provides a link
to download the PC Auto Backup program.
Multimedia Viewer You can view files with Multimedia Viewer.
Firmware Upgrade You can update the firmware of your camera. • The requirements are recommendation only. i-Launcher may not work properly
Front LCD Animation even when the computer meets the requirements, depending on the condition
You can download animations for the front LCD. of your computer.
Download
• If your computer does not meet the requirements, videos may not play correctly.
i-Launcher provides a link for downloading the PC
Auto Backup program when you connect the camera
PC Auto Backup The manufacturer is not responsible for any damage that results from using
to a computer. You can send photos or videos that you
captured with the camera to a PC wirelessly. unqualified computers such as a computer you assembled yourself.
If you use a Mac OS computer, only Firmware Upgrade and PC Auto Backup are
available.

Windows OS Requirements Mac OS requirements

Item Requirements Item Requirements
Intel® Core™ 2 Duo 1.66 GHz or higher/ OS Mac OS 10.5 or higher
CPU
AMD Athlon X2 Dual-Core 2.2 GHz or higher RAM Minimum 256 MB RAM (512 MB or more recommended)
RAM Minimum 512 MB RAM (1 GB or more recommended) Hard disk capacity Minimum 110 MB
Windows XP SP2, Windows Vista, Windows 7, or Others USB 2.0 port
OS*
Windows 8
Hard disk capacity 250 MB or more (1 GB and above recommended)
• 1024 X 768 pixels, 16-bit color display compatible Opening i-Launcher
monitor (1280 X 1024 pixels, 32-bit color display
recommended) On your computer, select Start All Programs Samsung i-Launcher
Others • USB 2.0 port Samsung i-Launcher. On your Mac, click Applications Samsung i-Launcher.
• nVIDIA Geforce 7600GT or higher/
ATI X1600 series or higher
• Microsoft DirectX 9.0c or higher
* A 32-bit version of i-Launcher will be installed—even on 64-bit editions of Windows XP,
Windows Vista, Windows 7, and Windows 8.

Using Multimedia Viewer

Multimedia Viewer allows you to play back files. From the Samsung i-Launcher screen, click Multimedia Viewer.
• Multimedia Viewer supports the following formats:
- Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG)
- Photos: JPG, GIF, BMP, PNG, TIFF, MPO
• Files that have been recorded with other manufacturers’ devices may not play back smoothly.
Viewing photos
1
No. Description
66% 1 File name
2 2 Enlarged area
3 Histogram
4 Open the selected file.
5 Histogram button
6 Rotate to the left/Rotate to the right.
7 Move to the previous file/Move to the next file.
8 Fit the photo to the screen.
9 View the photo in its original size.
3
0 Zoom in/Zoom out
! Switch between 2D and 3D mode.
! 0 98 7 6 5 4

Viewing videos
1
No. Description
1 File name
2 Adjust the volume.
3 Open the selected file.
4 Move to the next file.
5 Stop
6 Pause
7 Move to the previous file.
8 Progress bar
8 7 6 54 3

Updating the firmware

From the Samsung i-Launcher screen, click Firmware Upgrade.
Downloading the front LCD animation

From the Samsung i-Launcher screen, click Front LCD Animation Download.
Downloading the PC Auto Backup program

From the Samsung i-Launcher screen, click PC Auto Backup. For information about
installing the PC Auto Backup program, refer to page 118.

Wireless network
Learn to connect to wireless local area networks (WLANs) and use functions.
Connecting to a WLAN and configuring Sending photos or videos via email …………… 120
network settings ………………………………… 109 Changing email settings ……………………… 120
Connecting to a WLAN ………………………… 109 Sending photos or videos via email …………… 121
Using the login browser ……………………… 111 Using photo or video sharing websites ……… 123
Network connection tips ……………………… 112 Accessing a website …………………………… 123
Entering text …………………………………… 113 Uploading photos or videos …………………… 123
Saving files to a smart phone automatically … 114 Using AllShare Play to send files ……………… 125
Sending photos or videos to a smart phone … 115 Uploading photos to online storage …………… 125
Using a smart phone as a remote shutter Viewing photos or videos on devices that
release …………………………………………… 116 support AllShare Play ………………………… 126
Using Auto Backup to send photos or Sending photos using Wi-Fi Direct …………… 128
videos …………………………………………… 118
Installing the program for Auto Backup on your
PC ……………………………………………… 118
Sending photos or videos to a PC ……………… 118

Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.
Connecting to a WLAN 4 Select an AP.
1 On the Home screen, scroll to <Wi-Fi>. Wi-Fi Setting
2 Select , , , or . Refresh
Samsung 1
3 Press [m], and then select Wi-Fi Setting.
Samsung 2
• In some modes, follow the on-screen instructions until the Wi-Fi Setting
screen appears. Samsung 3
• The camera automatically searches for available AP devices. Samsung 4
Back Manual
• Select Refresh to refresh connectable APs.

• Select Add wireless network to add an AP manually. Your AP name must be
in English to add the AP manually.
Wireless network 109

Icon Description Setting network options

Ad hoc AP
1 In the Wi-Fi Setting screen, move to an AP, and then press [t].
Secured AP
WPS AP 2 Select each option, and then enter the required information.
Signal strength Option Description
Press [t] to open network setting options.

Network Password Enter the network password.
IP Setting Set the IP address automatically or manually.
• When you select a secured AP, a pop-up window appears. Enter the required
passwords to connect to the WLAN. For information about entering text, refer
to "Entering text". (p. 113)
• When a login page appears, refer to "Using the login browser". (p. 111)
• When you select an unsecured AP, the camera will connect to the WLAN.
• If you select a WPS profile supported AP, select WPS PIN connection,
and then enter a PIN on the AP device. You can also connect to a WPS profile
supported AP by selecting WPS button connection on the camera, and
then pushing the WPS button on the AP device.

Manually setting the IP address Using the login browser

You can enter your login information via the login browser when connecting to
1 In the Wi-Fi Setting screen, move to an AP, and then press [t]. some APs, sharing sites, or cloud servers.
2 Select IP Setting Manual. Button Description
Move to an item or scroll the page.
3 Select each option, and then enter the required information. [D/c/F/t]
[o] Select an item.
Option Description
Access the following options:
IP Enter the static IP address.
• Previous Page: Move to the previous page.
Subnet Mask Enter the subnet mask. • Next Page: Move to the next page.
[m]
Gateway Enter the gateway. • Reload: Reload the page.
DNS Server Enter the DNS address. • Stop: Stop loading the page.
• Exit: Close the login browser.
[f] Close the login browser.
• You may not be able to select some items depending on the page you
connected to. This does not indicate a malfunction.
• The login browser may not close automatically after you log into some pages. If
this occurs, close the login browser by pressing [f], and then proceed with the
desired operation.
• It may take longer to load the login page due to the page size or network speed.
If this occurs, wait until the login information input window appears.

Network connection tips • If you cannot connect to a WLAN, try another AP from the available AP list.
• You must insert a memory card to use the Wi-Fi features. • A login page may appear when you select free WLANs provided by some
network service providers. Enter your ID and password to connect to the WLAN.
• The quality of the network connection will be determined by the AP.
For information about registering or the service, contact the network service
• The further the distance between your camera and the AP, the longer it will take providers.
to connect to the network.
• Be cautious when you enter personal information for an AP connection. Do not
• If a nearby device is using the same radio frequency signal as your camera, it may enter any payment or credit card information on your camera. The manufacturer
interrupt your connection.
is not liable for any problem caused by entering such information.
• If your AP name is not in English, the camera may not be able to locate the device • Available network connections may differ by country.
or the name may appear incorrectly.
• The WLAN feature of your camera must comply with radio transmission laws in
• For network settings or a password, contact your network administrator or
your region. To ensure compliance, use the WLAN feature only in the country
network service provider.
where you purchased the camera.
• If a WLAN requires authentication from the service provider, you may not be able
• The process for adjusting network settings may differ, depending on network
to connect to it. To connect the WLAN, contact your network service provider.
conditions.
• Depending on the encryption type, the number of digits in the password may
• Do not access a network that you are not authorized to use.
differ.
• Before you connect to a network, ensure your battery is fully charged.
• A WLAN connection may not be possible in all surroundings.
• You cannot upload or send files captured in some modes.
• The camera may display a WLAN enabled printer on the AP List. You cannot
connect to a network via a printer.
• Files that you transfer to another device may not be supported by the device. In
this case, use a computer to play back the files.
• You cannot connect your camera to a network and a TV simultaneously.
• Connecting to a network may incur additional charges. Costs will vary based on
the conditions of your contract.

Entering text Icon Description

Learn how to enter text. The icons in the table below let you move the cursor, Switch between Symbol mode and ABC mode.
change the case, etc. Press [D/c/F/t] to move to a desired key, and then
press [o] to enter the key. Enter a space.
Done Save the displayed text.
View the entering text guide.
• You can use only the English alphabets in some modes, regardless of the display
language.
• To move to Done directly, press [P].
• You can enter up to 64 characters.
Done • The screen may differ depending on the input mode.
Cancel Backspace
Icon Description
Delete the last letter.
Move the cursor.
In ABC mode, change the case.
Enter ".com".

Saving files to a smart phone automatically
The camera connects to a smart phone that supports the AutoShare feature via a WLAN. When you capture a photo with your camera, the photo is saved to the smart phone
automatically.
• The AutoShare feature is supported by Galaxy series smart phones or Galaxy Tab models with the Android 2.2 OS or higher or iOS devices with the iOS 4.3 or higher. Before using this
feature, check the device’s firmware and update it if needed.
• You should install Samsung SMART CAMERA App on your phone or device before using this feature. You can download the application from Samsung Apps, the Google Play Store, or
the Apple App Store. Samsung SMART CAMERA App is compatible with Samsung camera models manufactured in 2013 or later.
• You must insert a memory card to use this feature.
• If you set this function, the setting is maintained even when you change the Shooting mode.
• This feature may not be supported in some modes.
1 On the camera, in Shooting mode, press [m]. 5 On the camera, allow the smart phone to connect to your camera.
• If the smart phone has been connected to your camera before, it is connected
2 On the camera, select AutoShare On. automatically.
• If the pop-up message that prompts you to download the application • An icon that shows the connection status ( ) will appear on the camera’s
appears, select Next.
screen.
3 On the smart phone, turn on Samsung SMART CAMERA App.
6 On the camera, capture a photo.
• For iOS devices, turn on the Wi-Fi feature before turning on the application. • The captured photo is saved to the camera, and then transferred to the smart
4 Select the camera from the list and connect the smart phone to the phone.
camera. • If you recorded a video, it is saved only to the camera.
• The smart phone can connect to only one camera at a time. • A GIF file captured in the Motion Photo or Jump Shot mode is not saved on
the smart phone.

Sending photos or videos to a smart phone
The camera connects to a smart phone that supports the MobileLink feature via a WLAN. You can easily send photos or videos to your smart phone.
• The MobileLink feature is supported by Galaxy series smart phones or Galaxy Tab models with the Android 2.2 OS or higher or iOS devices with the iOS 4.3 or higher. Before using this
feature, check the device’s firmware and update it if needed.
• When there are no files in the camera memory, you cannot use this feature.
• If you select files from the smart phone, you can view up to 1,000 recent files and send up to 150 files at a time. If you select files from the camera, you can view files that were selected
from the camera. The maximum number of files that can be sent varies depending on the storage space of the smart phone.
1 On the camera's Home screen, scroll to <Wi-Fi>. 5 Select the camera from the list and connect the smart phone to the
camera.
2 On the camera, select .
• The smart phone can connect to only one camera at a time.
• If the pop-up message that prompts you to download the application
appears, select Next. 6 On the camera, allow the smart phone to connect to your camera.
• If the smart phone has been connected to your camera before, it is connected
3 On the camera, select a sending option.
automatically.
• If you select Select Files from Smartphone, you can use your smart phone
to view and share files stored on the camera. 7 On the smart phone or camera, select files to transfer from the
• If you select Select Files from Camera, you can select files to send from the camera.
camera.
8 On the smart phone, touch the copy button or on the camera, select
4 On the smart phone, turn on Samsung SMART CAMERA App. Share.
• For iOS devices, turn on the Wi-Fi feature before turning on the application.
• The camera will send the files.

Using a smart phone as a remote shutter release
The camera connects to a smart phone that supports the Remote Viewfinder feature via a WLAN. Use the smart phone as a remote shutter release with the Remote Viewfinder
feature. The captured photo will display on the smart phone.
• The Remote Viewfinder feature is supported by Galaxy series smart phones or Galaxy Tab models with the Android 2.2 OS or higher or iOS devices with the iOS 4.3 or higher. Before
using this feature, check the device’s firmware and update it if needed.
1 On the camera's Home screen, scroll to <Wi-Fi>. 6 On the smart phone, set the following shooting options.
2 On the camera, select . Icon Description
• If the pop-up message that prompts you to download the application Flash option
appears, select Next.
Timer option
3 On the smart phone, turn on Samsung SMART CAMERA App.
• For iOS devices, turn on the Wi-Fi feature before turning on the application. Photo size
4 Select the camera from the list and connect the smart phone to the Saving location
camera. Zoom ratio
• The smart phone can connect to only one camera at a time.
• While using this feature, some buttons are not available on your camera.
5 On the camera, allow the smart phone to connect to your camera. • The zoom button and the shutter button on your smart phone will not
• If the smart phone has been connected to your camera before, it is connected function when using this feature.
automatically. • Remote Viewfinder mode supports the and photo sizes only.

Using a smart phone as a remote shutter release
7 On the smart phone, touch and hold to focus.

• The focus is automatically set to Multi AF.
8 Release to capture the photo.
• The photo will be resized to 640 X 360 when it is stored to the smart phone.
• When you use this feature, the ideal distance between the camera and the smart
phone may vary, depending on your surroundings.
• The smart phone must be within 7 m of the camera to use this feature.
• It will take some time to capture the photo after you release on the smart
phone.
• The Remote Viewfinder function will deactivate when:
- there is an incoming call on the smart phone
- either the camera or the smart phone turns off
- the memory is full
- either device loses its connection to the WLAN
- the Wi-Fi connection is poor or unstable

Using Auto Backup to send photos or videos
You can send photos or videos that you captured with the camera to a PC wirelessly.
Installing the program for Auto Backup on your PC Sending photos or videos to a PC
1 Install i-Launcher on the PC. (p. 102) 1 On the camera's Home screen, scroll to <Wi-Fi>.
2 Connect the camera to the PC with the USB cable. 2 Select .
• If the pop-up message that prompts you to install the program appears,
3 When the Auto Backup program icon appears, click it. select Next.
• The Auto Backup program is installed on the PC and the information about • You must configure the backup PC information to use the Auto Backup
the PC will be stored to the camera. Follow the on-screen instructions to
feature. For more details, refer to "Installing the program for Auto Backup on
complete the installation
your PC". (p. 118) If the Auto Backup program is installed on your PC, save the
• You can also save the information about the PC to the camera by connecting PC information via USB cable or Wi-Fi connection.
the PC and the camera via Wi-Fi.
• The camera will automatically attempt to connect to a WLAN via the most
4 Remove the USB cable. recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search for
Before installing the program, ensure that the PC is connected to a network. available AP devices. (p. 109)
3 Select a backup PC.

• If you have performed a backup before, skip to step 4.
4 Select OK.
• To cancel sending, select Cancel.
• You cannot select individual files to backup. This function backs up only new
files on the camera.
• The backup's progress will be shown on the PC monitor.

Using Auto Backup to send photos or videos
• When the transfer is completed, the camera will turn off automatically in • When you connect the camera to the WLAN, select the AP that is connected to
approximately 30 seconds. Select Cancel to return to the previous screen and the PC.
prevent the camera from turning off automatically. • The camera will search for available access points even if you are connecting to
• To turn off your PC automatically after the transfer is complete, press [m], the same access point again.
and then select Shut down PC after backup On. • If you turn off the camera or remove the battery while sending files, the file
• To change the backup PC, select Change PC. transfer will be interrupted.
• While you are using this feature, the shutter control is disabled on your camera.
• You can connect only one camera to the PC at a time for sending files.
• The backup may be canceled due to network conditions.
• Photos or videos can be sent to a PC one time only. Files cannot be sent again
even if you reconnect your camera to another PC.
• You must turn off Windows Firewall and any other firewalls before using this
feature.
• You can send up to 1,000 recent files.
• On the PC software, the server name must be entered in the Latin alphabet and
can contain no more than 48 characters.
• When multiple file types are created at once, only the image files (JPG) will be
sent to the PC with this feature.

Sending photos or videos via email
You can change settings in the email menu and send photos or videos stored on the camera via email.
Changing email settings 6 Select the Email box, enter your email address, and then select
In the email menu, you can change settings for storing your information. You can Done.
also set or change the email password. For information about entering text, refer to
"Entering text". (p. 113) 7 Select Save to save your changes.
• To delete your information, select Reset.
Storing your information
1 On the Home screen, scroll to <Wi-Fi>. Setting an email password
2 Select . 1 On the Home screen, scroll to <Wi-Fi>.

recently connected AP device. 2 Select .
• If the camera has not previously been connected to a WLAN, it will search for • The camera will automatically attempt to connect to a WLAN via the most
available AP devices. (p. 109) recently connected AP device.
3 Press [m]. available AP devices. (p. 109)
4 Select Sender Setting. 3 Press [m].
5 Select the Name box, enter your name, and then select Done. 4 Select Setting Password On.
• To deactivate the password, select Off.
Sender Setting
Name
5 When the pop-up appears, press [o].
• The pop-up disappears automatically even if you do not press [o].
Email 6 Enter a 4-digit password.

7 Enter the password again.
Save Reset
8 When the pop-up appears, press [o].
Back

If you lost your password, you can reset it by selecting Reset on the password Sending photos or videos via email
setting screen. When you reset the information, the previously saved user’s setting You can send photos or videos stored on the camera via email. For information
information, email address, and recently sent email list will be deleted. about entering text, refer to "Entering text". (p. 113)
1 On the Home screen, scroll to <Wi-Fi>.
Changing the email password 2 Select .

recently connected AP device.
1 On the Home screen, scroll to <Wi-Fi>.
2 Select . available AP devices. (p. 109)
recently connected AP device. 3 Select the Sender box, enter your email address, and then select
• If the camera has not previously been connected to a WLAN, it will search for Done.
available AP devices. (p. 109) • If you have previously saved your information, it will be inserted
automatically. (p. 120)
3 Press [m]. • To use an address from the list of previous senders, select an address.
4 Select Change Password. 4 Select the Receiver box, enter an email address, and then select
5 Enter your current 4-digit password. Done.
• To use an address from the list of previous recipients, select an address.
6 Enter a new 4-digit password. • Select to add additional recipients. You can input up to 30 recipients.
• Select to delete an address from the list.
7 Enter the new password again.
8 When the pop-up appears, press [o]. 5 Select Next.

6 Scroll to files to send, and then press [o]. • Even if a photo appears to have transferred successfully, errors with the
• You can select up to 20 files. The total size must be 7 MB or less. recipient’s email account may cause the photo to be rejected or recognized as
spam.
7 Select Next. • You may not be able to send an email if no network connection is available or if
8 Select the Comment box, enter your comments, and then select
•
your email account settings are incorrect.
You cannot send an email if the file size exceeds the limit. The maximum
Done. photo resolution you can send is 2M and the longest video you can send is
9 Select Send. 30 seconds at resolution or a video recorded using . If the selected
photo resolution is higher than 2M, it will be automatically resized to a lower
• The camera will send the email. resolution.
• If you cannot send an email because of firewall or user authentication settings,
contact your network administrator or network service provider.
• You can also send an email in Playback mode by pressing [m], and then
selecting Share(Wi-Fi) Email.

Using photo or video sharing websites
Upload your photos or videos to file sharing websites. Available websites will be displayed on your camera. To upload files to some websites, you must visit the website and
register before connecting your camera.
Accessing a website Uploading photos or videos

1 On the Home screen, scroll to <Wi-Fi>. 1 Access the website with your camera.
2 Select . 2 Scroll to the files you want to upload, and then press [o].
• You can select up to 20 files. The total size must be 10 MB or less. (On some
3 Select a website. websites, the total size or number of files may vary.)
• If the pop-up message that prompts you to create an account appears, select
OK. 3 Select Upload.
• The camera will automatically attempt to connect to a WLAN via the most • If you connected to Facebook, select Upload Upload.
recently connected AP device. • On some websites, you can enter your comments by selecting the Comment
• If the camera has not previously been connected to a WLAN, it will search for box. For information about entering text, refer to "Entering text". (p. 113)
available AP devices. (p. 109)
4 Enter your ID and password to log in.

• For information about entering text, refer to "Entering text". (p. 113)
• If you connected to SkyDrive, refer to "Using the login browser". (p. 111)
• To select an ID from the list, select an ID.
• If you have previously logged in to the website, you may be logged in
automatically.
You must have an existing account on the file sharing website to use this feature.

Using photo or video sharing websites
• You can set an upload folder for Facebook by pressing [m], and then
selecting Upload Folder (Facebook) on the website's list screen.
• You cannot upload files if the file size exceeds the limit. The maximum photo
resolution you can upload is 2M, and the longest video you can upload is
30 seconds at resolution or a video recorded using . If the selected
photo resolution is higher than 2M, it will be automatically resized to a lower
resolution. (On some websites, the maximum photo resolution may vary.)
• The method of uploading photos or videos may differ depending on the
selected website.
• If you cannot access a website because of firewall or user authentication settings,
contact your network administrator or network service provider.
• Uploaded photos or videos may be automatically titled with the date they were
captured.
• The speed of your internet connection may affect how quickly photos upload or
web pages open.
• You can also upload photos or videos to file sharing websites in Playback mode
by pressing [m], and then selecting Share(Wi-Fi) a desired website.
• You cannot upload videos to some websites.
• When you upload photos to SkyDrive, they will be resized to 2M while
maintaining their aspect ratios.

Using AllShare Play to send files
You can upload files from your camera to AllShare Play online storage or view files on an AllShare Play device connected to the same AP.
Uploading photos to online storage 4 Enter your ID and password, and then select Login OK.
• For information about entering text, refer to "Entering text". (p. 113)
1 On the Home screen, scroll to <Wi-Fi>. • To select an ID from the list, select an ID.
2 Select . • If you have previously logged in to the website, you may be logged in
automatically.
3 Select Web storage.
To use this feature, you must create an AllShare Play account and an account
• To change the size for uploaded photos, press [m], and then select
with an affiliated online storage service using your PC. After finishing creating
Upload Image Size.
accounts, add your online storage account to AllShare Play.
• If you have registered more than one web storage, you can select from the list
by pressing [m], and then selecting Change Web storage.
• If the guide message appears, press [o]. 5 Scroll to the files you want to upload, and then press [o].
recently connected AP device. 6 Select Upload.
• If the camera has not previously been connected to a WLAN, it will search for • If you have registered more than one web storage, select a web storage first.
available AP devices. (p. 109) • You cannot upload video files to AllShare Play online storage.
• You can upload up to 20 files.
• You can also upload photos in Playback mode by pressing [m], and then
selecting Share(Wi-Fi) AllShare Play.

Viewing photos or videos on devices that support AllShare 7 On the AllShare Play device, browse the shared photos or videos.
Play • For information about searching for the camera and browsing the photos or
videos on the AllShare Play device, refer to the device's user manual.
1 On the Home screen, scroll to <Wi-Fi>. • Videos may not play smoothly depending on the type of AllShare Play
device or the network condition. If this happens, re-record the video in
2 Select . or smaller quality and play it again. If videos do not play smoothly on your
device over the wireless connection, try connecting the camera to the device
3 Select Nearby devices.
with an A/V cable.
• If the guide message appears, press [o].
recently connected AP device.
available AP devices. (p. 109)
• You can set to allow only selected devices or all devices to connect by
pressing [m], and then selecting DLNA Access Control on the screen.
• A sharing file list is created. Wait until other devices can find your camera.
4 Connect the AllShare Play device to a network, and then turn on the
AllShare Play feature.
• Refer to your device's user manual for more information.
5 On the camera, allow the AllShare Play device to connect to your AP
camera.
S A camera is connected to a TV that supports AllShare Play via WLAN.
6 On the AllShare Play device, select a camera to connect.

• You can share up to 1,000 recent files. • While viewing photos or videos on the AllShare Play device, continuously using
• On an AllShare Play device, you can view only photos or videos captured with the device's remote or performing additional operations on the device may
your camera. prevent this feature from working properly.
• The range of the wireless connection between your camera and an AllShare Play • If you reorder or sort files on the camera while viewing them on an AllShare Play
device may vary depending on the specifications of the AP. device, you must repeat the initial set-up process to update the list of files on the
• If the camera is connected to 2 AllShare Play devices, playback may be slower. device.
• Photos or videos will be shared in their original sizes. • When there are no files in the camera memory, you cannot use this feature.
• You can use this feature only with devices that support AllShare Play. • We recommend you use a network cable to connect your AllShare Play device
• Shared photos or videos will not be stored on the AllShare Play device, but they to your AP. This will minimize any video ‘Stuttering’ you may experience when
can be stored in the camera to meet the device's specifications. streaming content.
• Transferring photos or videos to the AllShare Play device may take some time • To view files on an AllShare Play device using the Nearby devices feature,
depending on the network connection, the number of files to be shared, or the enable multicast mode on your AP.
sizes of the files.
• If you power off the camera abnormally while viewing photos or videos on an
AllShare Play device (for example, by removing the battery), the device considers
the camera to still be connected.
• The order of photos or videos on the camera may be different than on the
AllShare Play device.
• Depending on the number of photos or videos you want to share, it may take
some time to load your photos or videos and complete the initial set-up process.

Sending photos using Wi-Fi Direct
When the camera connects via a WLAN to a device that supports the Wi-Fi Direct function, you can send photos to the device. This feature may not be supported on some
devices.
1 On the device, turn on the Wi-Fi Direct option.

2 On the camera, in Playback mode, scroll to a photo.
3 Press [m], and then select Share(Wi-Fi) Wi-Fi Direct.
• When in the single image view, you can send only one photo at a time.
• When in the thumbnails view, you can select multiple photos by scrolling
to thumbnails, and then pressing [o]. Select Next when you are finished
selecting photos.
4 Select the device from the camera’s list of Wi-Fi Direct devices.
• Ensure that the device's Wi-Fi Direct option is turned on.
• You can also select your camera from the device's list of Wi-Fi Direct devices.
5 On the device, allow the camera to connect to the device.
• The photo will be sent to the device.
• You can send up to 20 files at a time.
• When there are no photos in the camera memory, you cannot use this feature.
• If you cannot connect to a Wi-Fi Direct device, update the device with the latest
firmware. This feature may not be supported on some devices.

Settings
Refer to options to configure your camera’s settings.
Settings menu ……………………………………… 130

Accessing the settings menu …………………… 130
Sound ……………………………………………… 131
Display …………………………………………… 131
Connectivity ……………………………………… 132
General …………………………………………… 133

Settings menu
Learn to configure your camera's settings.
Accessing the settings menu 4 Select an item.
1 On the Home screen, scroll to <Basic>. Sound
2 Select . Volume Medium
Beep Sound On
3 Select a menu.
Shutter Sound Sound 1
Settings Start Sound Off
Sound AF Sound On
Display Back Select
Connectivity
General 5 Select an option.

Volume
Off
Icon Description Low
Sound: Set various camera sounds and the volume. (p. 131) Medium
Display: Customize the display settings. (p. 131) High

Connectivity: Set the connection options. (p. 132)
General: Change the settings for the camera system such as Back Select
memory format and default file name. (p. 133)
6 Press [m] to return to the previous screen.
Settings 130

Settings menu
Sound Display
* Default * Default
Item Description Item Description
Volume Set the volume of all sounds. (Off, Low, Medium*, High) Set a start image to display when the camera turns on.
Set the sound the camera emits when you press the buttons or • Off*: Display no start image.
Beep Sound • Logo: Display a default image stored in the internal memory.
switch modes on or off. (Off, On*)
Set the sound the camera emits when you press the shutter • User Image: Select User Image from the photos you captured
Shutter Sound Start Image in the memory.
button. (Off, Sound 1*, Sound 2, Sound 3)
Set the sound the camera emits when you turn on your camera. • The camera will save only one User Image in the internal
Start Sound memory at a time.
(Off*, Star Flight, Laser Show, Cloud)
• If you select a new photo as a User Image or reset your
Set the sound the camera emits when you half-press the shutter camera, the camera will delete the current image.
AF Sound
button on or off. (Off, On*)
Set wallpaper for the Home screen with the desired image.
Wallpapers
(Wallpaper Gallery, Album)
Select a guide to help you compose a scene. (Off*, 3 X 3, 2 X 2,
Guide Line
Cross, Diagonal)
Date/Time Set whether or not to display the date and time on the camera's
Display display. (Off*, On)
Help Guide
Display a brief description of an option or menu. (Off, On*)
Display
Settings 131

Settings menu
* Default Connectivity
Item Description
* Default
Adjust the brightness of the screen. (Auto*, Dark, Normal, Item Description
Display Bright)
Set the video signal output for your region.
Brightness Normal is fixed in Playback mode even if you have selected
Auto.
• NTSC: USA, Canada, Japan, Korea, Taiwan, Mexico, etc
Video Out • PAL (supports only BDGHI): Australia, Austria, Belgium, China,
Set whether or not to review a captured image before returning Denmark, England, Finland, France, Germany, Italy, Kuwait,
to the Shooting mode. (Off, On*) Malaysia, Netherlands, New Zealand, Norway, Singapore, Spain,
Quick View
This feature does not work in some modes. Sweden, Switzerland, Thailand, etc
Set i-Launcher to launch automatically when you connect your
i-Launcher
If you perform no operations for 30 seconds, the camera camera to your computer. (Off, On*)
automatically switches to Power save mode. (Off*, On)
Power Save
In Power save mode, press any button other than [X] to
resume using the camera.
Settings 132

Settings menu
General * Default
Item Description
* Default
Item Description Specify how to name files.
• Reset: Set the file number to start from 0001 when you
Network Information See the Mac address and serial number of your camera.
insert a new memory card, format a memory card, or
Language Set a language for the display text. delete all files.
Set the time zone for your location. When you travel • Series*: Set the file number to resume from the
Time Zone to another country, select Visit, and then select the previous file number when you insert a new memory
appropriate time zone. (Home*, Visit) card, format a memory card, or delete all files.
Date/Time Set Set the date and time. • The default name of the first folder is 100PHOTO and
the default name of the first file is SAM_0001.
Set a date format. (YYYY/MM/DD, MM/DD/YYYY,
DD/MM/YYYY) File No. • The file number increases by one, from SAM_0001 to
Date Type SAM_9999, each time you capture a photo or record
The default date type may differ depending on the a video.
language selected. • The folder number increases by one, from 100PHOTO
Set the time format. (12 Hr, 24 Hr) to 999PHOTO, each time a folder is full.
The default time type may differ depending on the
• The maximum number of files that can be stored in
Time Type
one folder is 9,999.
language selected.
• The camera defines file names according to the
Design rule for Camera File system (DCF) standard. If
you intentionally change file names, the camera may
not play back the files.
Settings 133

Settings menu
* Default * Default
Item Description Item Description
Set whether or not to display the date and time on Start a preset Wi-Fi function by pressing [x].
DIRECT LINK (Wi-Fi
captured photos. (Off*, Date, Date & Time) (AutoShare*, MobileLink, Remote Viewfinder,
Button)
• The date and time will be displayed on the bottom Auto Backup, Email, SNS & Cloud, AllShare Play)
right corner of the photo. Set a light to automatically turn on in dark places to help
• Some printer models may not print the date and time AF Lamp
you focus. (Off, On*)
properly.
Imprint Format the internal memory and the memory card.
• The photo will not display the date and time if:
- you select Text in Scene mode Formatting will delete all files, including protected files.
- you select Live Panorama, Self Shot, Children, Jump (Yes, No)
Shot, Beauty Shot, Beauty Palette, or Motion Photo Format Errors can occur if you use a memory card formatted by
mode another brand of camera, a memory card reader, or a
- you capture a photo with the front display computer. Please format memory cards in the camera
before using them to capture photos.
Set the camera to automatically turn off when you
perform no operations for a specified period. Reset menus and shooting options. Date, time, language,
Reset
(Off, 1 min, 3 min*, 5 min, 10 min) and video output settings will not be reset. (Yes, No)
Auto Power Off
• Your settings will not change when you replace the Open Source Licenses View open source licenses.
battery.
• The camera will not automatically turn off when the
camera is connected to a computer or WLAN, and
when you are playing a slide show or videos.
Settings 134

Appendixes
Get information about error messages, specifications, and maintenance.
Error messages ……………………………………… 136

Camera maintenance ……………………………… 137
Cleaning your camera …………………………… 137
Using or storing the camera ……………………… 138
About memory cards ……………………………… 139
About the battery ………………………………… 142
Before contacting a service center ……………… 146
Camera specifications ……………………………… 149
Glossary …………………………………………… 153
Index ………………………………………………… 158

Error messages
When the following error messages appear, try these remedies.
Error message Suggested remedies Error message Suggested remedies

• Turn off your camera, and then turn it on again. Your camera does not support the FAT file structure of
File system not
Card Error • Remove your memory card, and then insert it again. the inserted memory card. Format the memory card on
supported.
• Format your memory card. the camera.
The inserted memory card is not supported by your The camera has failed to locate a device that supports
Card not supported. camera. Insert a microSD, microSDHC, or microSDXC Initialization failed. AllShare Play. Turn on devices on the network that
memory card. support AllShare Play.
• The camera cannot connect to the network using the Password Incorrect
The password for transferring files to another camera is
selected access point. Select another AP and try again. wrong. Enter the correct password.
Connection failed.
• The camera has failed to connect to the other devices. Low Battery Insert a charged battery or recharge the battery.
Try connecting again.
Memory Full Delete unnecessary files or insert a new memory card.
File names do not match the DCF standard. Transfer
Capture photos or insert a memory card that contains
the files from the memory card to your computer and No Image File
DCF Full Error some photos.
format the card. Then, open the Settings menu and
select General File No. Reset. (p. 133) Network connection disconnected while transferring
Photo transfer failed.
photos. Try restarting the AllShare Play feature.
Network connection disconnected while transferring
Device disconnected. • The camera has failed to send a photo to the other
photos. Reselect a device that supports AllShare Play.
devices. Try sending again.
File Error Delete the damaged file or contact a service center.
Transfer failed. • The camera has failed to send an email or transfer a
photo to a device that supports AllShare Play. Check
the network connection and try again.
Appendixes 136

Camera maintenance
Cleaning your camera Camera body

Wipe gently with a soft, dry cloth.
Camera lens and display
Use a blower brush to remove dust and wipe the lens gently with a soft cloth. If any
dust remains, apply lens cleaning liquid to a piece of lens cleaning paper and wipe
gently.
• Never use benzene, thinners, or alcohol to clean the device. These solutions can
damage the camera or cause it to malfunction.
• Do not press on the lens cover or use a blower brush on the lens cover.
Appendixes 137

Camera maintenance
Using or storing the camera Storing for extended period of time

• When you store the camera for an extended period, place it in a sealed container
Inappropriate places to use or store the camera with an absorbent material, such as silica gel.
• Avoid exposing the camera to very cold or very hot temperatures. • Over time, unused batteries will discharge and must be recharged before use.
• Avoid using your camera in areas with extremely high humidity, or where the • You must reset the date and time when you turn the camera on after the camera
humidity changes drastically. and battery have been separated for a prolonged period.
• Avoid exposing the camera to direct sunlight and storing it in hot, poorly-
ventilated areas, such as in a car during summer time.
• Protect your camera and the display from impact, rough handling, and excessive Using the camera with caution in humid environments
vibration to avoid serious damage. When you transfer the camera from a cold environment to a warm one,
• Avoid using or storing your camera in dusty, dirty, humid, or poorly-ventilated condensation can form on the lens or internal components of the camera. In this
areas to prevent damage to moving parts and internal components. situation, turn off the camera and wait for at least 1 hour. If condensation forms
• Do not use your camera near fuels, combustibles, or flammable chemicals. Do on the memory card, remove the memory card from the camera and wait until all
not store or carry flammable liquids, gases, or explosive materials in the same moisture has evaporated before reinserting it.
compartment as the camera or its accessories.
• Do not store the camera where there are mothballs.
Other cautions
• Do not swing your camera by the strap. This may cause injury to yourself or others
Using on beaches or shores or damage to your camera.
• Do not paint your camera, as paint can clog moving parts and prevent proper
• Protect your camera from sand and dirt when you use it on beaches or in similar
operation.
areas.
• Turn off the camera when not using it.
• Your camera is not waterproof. Do not handle the battery, adapter, or memory
card with wet hands. Operating the camera with wet hands may cause damage to • Your camera contains delicate parts. Avoid impacts to the camera.
your camera.
Appendixes 138

Camera maintenance
• Protect the display from external force by keeping it in the case when not in • Paint or metal on the outside of the camera may cause allergies, itchy skin,
use. Protect the camera from scratches by keeping it away from sand, sharp eczema, or swelling for people with sensitive skin. If you experience any of these
implements, or loose change. symptoms, stop using the camera immediately and consult a doctor.
• Do not use the camera if the screen is cracked or broken. Broken glass or acrylic • Do not insert foreign objects into any of your camera’s compartments, slots, or
could cause injury to your hands and face. Take the camera to a Samsung service access points. Damage due to improper use may not be covered by your warranty.
center to have it repaired. • Do not allow unqualified personnel to service the camera or attempt to service
• Never place cameras, batteries, chargers, or accessories near, on, or in heating the camera yourself. Any damage that results from unqualified service is not
devices, such as microwave ovens, stoves, or radiators. These devices may be covered by your warranty.
deformed and can overheat and cause a fire or explosion.
• Do not expose the lens to direct sunlight, as this may discolor the image sensor or
cause it to malfunction.
• Protect the lens from fingerprints and scratches. Clean the lens with a soft, clean, About memory cards
debris-free lens cloth.
• The camera may turn off if struck or dropped. This is to protect the memory card. Supported memory cards
Turn on the camera to use it again.
Your camera supports microSD (Secure Digital), microSDHC (Secure Digital High
• While you use the camera, it may heat up. This is normal and should not affect
Capacity), or microSDXC (Secure Digital eXtended Capacity) memory cards.
your camera’s lifespan or performance.
• When you use the camera in low temperatures, it may take some time to turn on, To read data with a PC or memory card reader, insert the memory
the color of the display may be changed temporarily, or after-images may appear. card into a memory card adapter.
These conditions are not malfunctions and they will correct themselves when the
camera is returned to milder temperatures.
Appendixes 139

Camera maintenance
Memory card capacity Video

The memory capacity may differ depending on the scenes you shoot or shooting Size 30 fps
conditions. These capacities are based on a 2 GB microSD card:
Approx. 26' 20"
Photo 1280 X 720
Size Super Fine Fine Normal Approx. 46' 55"

640 X 480
218 432 639
Approx. 261' 11"
245 483 714 320 X 240
288 566 835
Approx. 261' 11"
341 669 984 For Sharing
638 1,228 1,777 The figures above are measured without using the zoom function. Available recording time
may vary if you use the zoom. Several videos were recorded in succession to determine the
1,006 1,897 2,692 total recording time.
1,329 2,461 3,437

2,508 4,359 5,780
Appendixes 140

Camera maintenance
Cautions when using memory cards • Prevent memory cards from making contact with liquids, dirt, or foreign
• Avoid exposing memory cards to very cold or very hot temperatures (below substances. If dirty, wipe the memory card clean with a soft cloth before you
0 °C/32 °F or above 40 °C/104 °F). Extreme temperatures can cause memory cards insert the memory card into your camera.
to malfunction. • Do not allow liquids, dirt, or foreign substances to come in contact with memory
• Insert a memory card in the correct direction. Inserting a memory card in the cards or the memory card slot. Doing so may cause memory cards or the camera
wrong direction may damage your camera and memory card. to malfunction.
• Do not use memory cards that have been formatted by other cameras or by a • When you carry a memory card, use a case to protect the card from electrostatic
computer. Reformat the memory card with your camera. discharges.
• Turn off the camera before you insert or remove the memory card. • Transfer important data to other media, such as a hard disk, CD, or DVD.
• Do not remove the memory card or turn off your camera while the lamp is • When you use the camera for an extended period, the memory card may become
blinking, as this may damage your data. warm. This is normal and does not indicate a malfunction.
• When the lifespan of a memory card has expired, you cannot store any more
photos on the card. Use a new memory card. The manufacturer is not responsible for any loss of data.
• Do not bend, drop, or subject memory cards to heavy impact or pressure.
• Avoid using or storing memory cards near strong magnetic fields.
• Avoid using or keeping memory cards in areas with high temperatures, high
humidity, or corrosive substances.
Appendixes 141

Camera maintenance
About the battery Battery life

Use only Samsung-approved batteries. Average shooting time/
Test conditions (when the battery is fully charged)
Number of photos
Battery specifications
The battery life was measured under the following
Specification Description conditions: in Program mode, in darkness,
resolution, Fine quality, DIS on.
Model BP70A
Type Lithium-ion battery 1. Set the flash option to Fill in, take a single shot,
Cell capacity 700 mAh Approximately and zoom in or out.
120 min/ 2. Set the flash option to Off, take a single shot, and
Voltage 3.7 V Photos
Approximately zoom in or out.
Charging time* (when the camera is 240 photos
Approximately 160 min 3. Perform steps 1 and 2, waiting 30 seconds
switched off)
between each step. Repeat the process for
* Charging the battery by connecting it to a computer may take longer. 5 minutes, and then turn off the camera for
1 minute.
4. Repeat steps 1 to 3.
Approximately
Videos Record videos at resolution and 30 fps.
100 min
• The figures above are measured by Samsung’s standards. Your results may differ,
depending on your actual usage.
• Several videos were recorded in succession to determine the total recording time.
• When using network functions, the battery will be depleted more quickly.
Appendixes 142

Camera maintenance
Low battery message Cautions about using the battery

When the battery has fully discharged, the battery icon will turn red and the "Low Protect batteries, chargers, and memory cards from damage.
Battery" message will appear. Prevent batteries from making contact with metal objects, as this can create a
connection between the + and – terminals of your battery and lead to temporary or
permanent battery damage and may cause a fire or electric shock.
Notes about using the battery
• Avoid exposing batteries to very cold or very hot temperatures (below 0 °C/32 °F
or above 40 °C/104 °F). Extreme temperatures can reduce the charging capacity of Notes about charging the battery
your batteries. • If the status lamp is off, make sure that the battery is inserted correctly.
• When you use the camera for an extended period, the area around the battery • If the camera is on while charging, the battery may not fully charge. Turn off the
chamber may become warm. This does not affect the normal use of the camera. camera before charging the battery.
• Do not pull the power supply cord to disconnect the plug from the power outlet, • Do not use your camera when you are charging the battery. This may cause a fire
as this may cause a fire or electric shock. or electric shock.
• In temperatures below 0 °C/32 °F, battery capacity and battery life may decrease. • Do not pull the power supply cord to disconnect the plug from the power outlet,
• Battery capacity may decrease in low temperatures, but will return to normal in as this may cause a fire or electric shock.
milder temperatures. • Let the battery charge for at least 10 minutes before turning on the camera.
• Remove the batteries from your camera when storing it for an extended period. • If you connect the camera to an external power source when the battery is
Installed batteries may leak or corrode over time and cause serious damage depleted, using high energy-consuming functions will cause the camera to turn
to your camera. Storing the camera for extended periods with the battery off. To use the camera normally, recharge the battery.
installed causes the battery to discharge. You may not be able to recharge a fully
discharged battery.
• When you do not use the camera for an extended period (3 months or more),
check the battery and recharge it regularly. If you let the battery discharge
continually, its capacity and life may decrease, which can lead to a malfunction,
fire, or explosion.
Appendixes 143

Camera maintenance
• If you reconnect the power cable when the battery is fully charged, the status Handle and dispose of batteries and chargers with care
lamp turns on for approximately 30 minutes. • Never dispose of batteries in a fire. Follow all local regulations when you dispose
• Using the flash or recording videos depletes the battery quickly. Charge the of used batteries.
battery until the red status lamp turns off. • Never place batteries or cameras on or in heating devices, such as microwave
• If the status lamp blinks in red, reconnect the cable, or remove the battery and ovens, stoves, or radiators. Batteries may explode when they are overheated.
insert it again.
• If you charge the battery when the cable is overheated or the temperature is too
high, the status lamp may blink in red. Charging will start when the battery cools
down.
• Overcharging batteries may shorten battery life. After charging is finished,
disconnect the cable from your camera.
• Do not bend or place heavy objects on the AC cable. Doing so may damage the
cable.
Notes about charging with a computer connected

• Use only the provided USB cable.
• The battery may not charge when:
- you use a USB hub
- other USB devices are connected to your computer
- you connect the cable to the port on the front side of your computer
- the USB port of your computer does not support the power output standard
(5 V, 500 mA)
Appendixes 144

Camera maintenance
Personal injury or death can occur if the battery is handled carelessly • Do not disassemble the battery or puncture it with any sharp object.
or improperly. For your safety, follow these instructions for proper • Avoid exposing the battery to high pressure or crushing forces.
battery handling: • Avoid exposing the battery to major impacts, such as dropping it from
• The battery can ignite or explode if not handled properly. high places.
If you notice any deformities, cracks, or other abnormalities in the battery, • Do not expose the battery to temperatures of 60 °C (140 °F) or above.
immediately discontinue use of the battery and contact a service center. • Do not allow the battery to come in contact with moisture or liquids.
• Use only authentic, manufacturer-recommend battery chargers and • Do not expose the battery to sources of excessive heat such as sunshine,
adapters and charge the battery only by the methods described in this fire or the like.
user manual.
• Do not place the battery near heating devices or expose it to excessively Disposal guidelines
warm environments, such as the inside of an enclosed car in the • Dispose of the battery with care.
summertime. • Do not dispose of the battery in a fire.
• Do not place the battery in a microwave oven. • Disposal regulations may differ by country or region. Dispose of the
• Avoid storing or using the battery in hot, humid places, such as spas or battery in accordance with all local and federal regulations.
shower enclosures.
• Do not rest the device on flammable surfaces, such as bedding, carpets, Guidelines for charging the battery
or electric blankets for a prolonged period. Charge the battery only by the methods described in this user manual. The
• When the device is switched on, do not leave it in any confined space for battery can ignite or explode if not charged properly.
a prolonged period.
• Do not allow battery terminals to come in contact with metallic objects,
such as necklaces, coins, keys, or watches.
• Use only authentic, manufacturer-recommended, Lithium-ion
replacement batteries.
Appendixes 145

Before contacting a service center
If you are having trouble with your camera, try these troubleshooting procedures before you contact a service center. If you have attempted the suggested remedy and are still
having problems with your device, contact your local dealer or service center.
When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery.
Situation Suggested remedies Situation Suggested remedies

• Ensure that the battery is inserted. • There is no space on the memory card. Delete
Cannot turn on the
• Ensure that the battery is inserted correctly. (p. 23) unnecessary files or insert a new card.
camera
• Charge the battery. • Format the memory card.
Cannot capture
• Charge the battery. • The memory card is defective. Get a new memory card.
photos
• Your camera may be in Auto Power Off mode. (p. 134) • Make sure that the camera is switched on.
The power turns off • Charge the battery.
suddenly • The camera may turn off to prevent the memory card
from being damaged due to an impact. Turn on your • Make sure that the battery is inserted correctly.
camera again. The camera freezes Remove the battery and insert it again.
• The battery may lose power more quickly in low While you use the camera, it may heat up. This is
temperatures (below 0 °C/32 °F). Keep the battery warm The camera heats up normal and should not affect your camera’s lifespan or
by putting it into your pocket. performance.
The camera is losing • Using the flash or recording videos depletes the battery The flash does not • The flash option may be set to Off. (p. 67)
battery power quickly quickly. Recharge if needed. work • You cannot use the flash in some modes.
• Batteries are consumable parts that must be replaced
over time. Get a new battery if the battery life is
diminishing quickly.
Appendixes 146


The flash fires The flash may fire due to static electricity. The camera is • Make sure that the focus option you set is suitable for
unexpectedly not malfunctioning. close-up shots. (p. 70)
The date and time are • Make sure that the lens is clean. If not, clean the lens.
Set the date and time in the display settings. (p. 133) The photo is blurry
incorrect (p. 137)
The display or • Make sure that the subject is within range of the flash.
Remove the battery, and then insert it again. (p. 150)
buttons do not work
If you use your camera at very low temperatures, it may The colors in the An incorrect White Balance can create unrealistic color.
The camera display cause the camera screen to malfunction or discolor. For photo do not match Select the proper White Balance option to suit the light
responds poorly better performance of your camera screen, use your the actual scene source. (p. 77)
camera in moderate temperatures. Your photo is overexposed.
• Turn off your camera, and then turn it on again. The photo is too • Turn off the flash. (p. 67)
• Remove your memory card, and then insert it again. bright • Adjust the ISO sensitivity. (p. 69)
The memory card has • Adjust the exposure value. (p. 75)
an error • Format your memory card.
See "Cautions when using memory cards" for more detail. Your photo is underexposed.
(p. 141) • Turn on the flash. (p. 67)
The photo is too dark
If you change the name of a file, your camera may not • Adjust the ISO sensitivity. (p. 69)
Cannot play back files
play the file (the name of the file should meet the DCF • Adjust the exposure value. (p. 75)
standard). If you encounter this situation, play back the
files on your computer.
Appendixes 147


• Make sure that the camera is correctly connected to the • End i-Launcher and restart the program.
The TV does not
display your photos
TV with the A/V cable. • Make sure that i-Launcher is set to On in the settings
• Make sure that your memory card contains photos. menu. (p. 132)
• Make sure that the USB cable is connected correctly. • Depending on your computer's specifications
Your computer does and environment, the program may not launch
• Make sure that your camera is switched on. i-Launcher is not
not recognize your automatically. In this case, click Start All Programs
camera • Make sure that you are using a supported operating functioning properly
system. Samsung i-Launcher Samsung i-Launcher
on your Windows computer. (For Windows 8, open
Your computer
Start screen, and then select All apps Samsung
disconnects the The file transmission may be interrupted by static
i-Launcher.) Or, click Applications Samsung
camera while electricity. Disconnect the USB cable and connect it again.
i-Launcher on your Mac OS computer.
transferring files
Your TV or computer
Videos may not play on some video player programs. microSDXC memory cards use the exFAT file system.
cannot display
Your computer To play video files captured with your camera, use the photos and videos Ensure that the external device is compatible with the
cannot play videos Multimedia Viewer program that you can install with the that are stored on a exFAT file system before connecting the camera to the
i-Launcher program on your computer. microSDXC memory device.
card.
Your computer does microSDXC memory cards use the exFAT file system.
not recognize a To use microSDXC memory cards on a Windows XP
microSDXC memory computer, download and update the exFAT file system
card. driver from the Microsoft website.
Appendixes 148

Camera specifications
Image sensor Wide (W) Tele (T)

Type 1/2.33" (Approximately 7.73 mm) CCD 31 in. (80 cm)– 98 in. (250 cm)–
Normal (AF)
infinity infinity
Effective pixels Approximately 16.2 mega-pixels
Range 2–31 in. 39–98 in.
Total pixels Approximately 16.5 mega-pixels Macro
(5–80 cm) (100–250 cm)
Lens 2 in. (5 cm)– 39 in. (100 cm)–
Auto Macro
Samsung Lens f = 4.5–22.5 mm infinity infinity
Focal length
(35 mm film equivalent: 25–125 mm) Shutter speed
F-stop range F2.5 (W)–F6.3 (T) • Auto: 1/8–1/2,000 sec.
Still image mode: 1.0–5.0X (Optical zoom X Digital zoom: • Program: 1–1/2,000 sec.
Zoom • Night: 16–1/2,000 sec.
25.0X, Optical zoom X Intelli zoom: 10.0X)
Display • Fireworks: 2 sec.
Exposure
Type TFT LCD
Control Program AE
• Main display: 2.7" (67.5 mm) 230K
Feature
• Front display: 1.48" (37.6 mm) 61K Metering Multi, Spot, Center-weighted, Face Detection
Focusing Compensation ±2 EV (1/3 EV Step)
TTL auto focus (Center AF, Multi AF, Tracking AF, Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600,
Type ISO equivalent
Face Detection AF) ISO 3200
Appendixes 149

Flash Date Imprinting

Mode Off, Smart Auto, Auto, Red-eye, Fill in, Slow Sync, Red-eye Fix Date & Time, Date, Off
• Wide: 12–165 in. (0.3–4.2 m) (ISO Auto) Shooting
Range
• Tele: 20–63 in. (0.5–1.6 m) (ISO Auto) • Modes: Smart Auto (Portrait, Night Portrait, Backlight
Recharging time Approximately 4 sec. Portrait, Night, Backlight, Landscape, White, Natural Green,
Blue Sky, Sunset, Macro, Macro text, Macro Color, Tripod,
Shake reduction Action, Fireworks, Candle, Spotlight, Spotlight (Macro),
Digital Image Stabilization (DIS) Spotlight (Portrait)), Program, Scene (Landscape, Sunset,
Effect Photos Dawn, Backlight, Beach & Snow, Text), Live Panorama, Self
Shot, Children, Jump Shot, Beauty Shot, Night Shot, Close-
• Photo Filter (Smart Filter): Miniature, Vignetting, Ink Painting, up Shot, Magic Frame, Beauty Palette, Photo Filter, Split Shot,
Photo Shooting Oil Painting, Cartoon, Cross Filter, Sketch, Soft Focus, Fish- Motion Photo
mode eye, Old Film, Half Tone Dot, Classic, Retro, Zooming Shot • Burst: Single, Continuous, Motion Capture, AEB
• Image Adjust: Sharpness, Contrast, Saturation • Timer: Off, 10 Sec, 2 Sec, Double (10 Sec, 2 Sec)
Movie Filter (Smart Filter): Miniature, Vignetting, Half Tone Dot, • Modes: Smart Movie (Landscape, Blue Sky, Natural Green,
Video Shooting
Sketch, Fish-eye, Classic, Retro, Palette Effect 1, Palette Effect 2, Sunset), Movie, Movie Filter
mode
Palette Effect 3, Palette Effect 4
• Format: MP4 (H.264) (Max recording time: 20 min)
White Balance Videos • Size: 1280 X 720, 640 X 480, 320 X 240, For Sharing
Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom Set • Frame Rate: 30 fps
• Sound Alive: Sound Alive On, Sound Alive Off, Mute
• Video editing (embedded): Pause during recording
Appendixes 150

Playback
Icon Resolution
• Type: Single image, Thumbnails, Multi Slide Show with Music 4608 X 3456
and Effect, Movie clip
• Edit: Resize, Rotate, Smart Filter, Crop 4608 X 3072
Photos • Effect: Image Adjust (Brightness, Contrast, Saturation, ACB, 4608 X 2592
Face Retouch, Red-eye Fix), Smart Filter (Normal, Miniature,
Vignetting, Ink Painting, Oil Painting, Cartoon, Cross Filter, Photo Size 3648 X 2736
Sketch, Soft Focus, Fish-eye, Old Film, Half Tone Dot, Classic,
Retro, Zooming Shot) 2592 X 1944
Videos Edit: Still image capture, Time trimming 1984 X 1488

Storage 1920 X 1080
• Internal memory: Approximately 10 MB 1024 X 768
• External memory (Optional):
microSD card (2 GB guaranteed), Wireless network
Media
microSDHC card (up to 32 GB guaranteed), MobileLink, Remote Viewfinder, Auto Backup, Email, SNS & Cloud, AllShare Play,
microSDXC card (up to 64 GB guaranteed) AutoShare, Wi-Fi Direct
Internal memory capacity may not match these specifications.
• Still Image: JPEG (DCF), EXIF 2.21, GIF
File format
• Movie Clip: MP4 (Video: MPEG-4.AVC/H.264, Audio: AAC)
Appendixes 151

Interface Dimensions (W X H X D)
Digital output 3.8 X 2.2 X 0.7 in. (95.5 X 55.2 X 18.4 mm) (without protrusions)
USB 2.0
connector Weight
Audio input/ 4.1 oz (116.3 g) (without battery and memory card)
Internal speaker (Mono), Microphone (Mono)
output
Operating Temperature
Video output A/V: NTSC, PAL (selectable)
0–40 °C (32–104 °F)
DC power input Operating Humidity
5V
connector
5–85 %
Power source
Software
Rechargeable
Lithium-ion battery (BP70A, 700 mAh) i-Launcher
battery
Connector type Micro USB (5 pin) Specifications may change without notice to improve performance.
The power source may differ depending on your region.
Appendixes 152

Glossary
ACB (Auto Contrast Balance) Composition

This feature automatically improves the contrast of your images when the subject is Composition in photography means arranging objects in a photo. Usually, abiding
backlit or when there is a high contrast between your subject and the background. by the rule of thirds leads to a good composition.
AEB (Auto Exposure Bracket) DCF (Design rule for Camera File system)
This feature automatically captures several images at different exposures to help A specification to define a file format and file system for digital cameras created by
you capture a properly-exposed image. the Japan Electronics and Information Technology Industries Association (JEITA).
AF (Auto Focus) Depth of field

A system that automatically focuses the camera lens on the subject. Your camera The distance between the nearest and farthest points that can be acceptably
uses the contrast to focus automatically. focused in a photograph. Depth of field varies with lens aperture, focal length, and
distance from the camera to the subject. Selecting a smaller aperture, for example,
Aperture will increase the depth of field and blur the background of a composition.
The aperture controls the amount of light that reaches the camera’s sensor.
Digital zoom
Camera shake (Blur) A feature that artificially increases the amount of zoom available with a zoom lens
If the camera is moved while the shutter is open, the entire image may appear (Optical zoom). When using the Digital zoom, the image quality will deteriorate as
blurred. This occurs more often when the shutter speed is slow. Prevent camera the magnification increases.
shake by raising the sensitivity, using the flash, or using a faster shutter speed.
Alternately, use a tripod, the DIS or OIS function to stabilize the camera.
Appendixes 153

Glossary
DIS (Digital Image Stabilization) Exposure

This feature compensates in real-time for shaking and vibrating while shooting. The amount of light allowed to reach the camera’s sensor. Exposure is controlled by
There can be a certain amount of image degradation compare to Optical Image a combination of the shutter speed, the aperture value, and ISO sensitivity.
Stabilization.
Flash
EV (Exposure Value) A speed light that helps to create adequate exposure in low-light conditions.
This feature allows you to quickly adjust the exposure value measured by the
camera, in limited increments, to improve the exposure of your photos. Set the EV Focal length
compensation to -1.0 EV to adjust the value one step darker and 1.0 EV to one step The distance from the middle of the lens to its focal point (in millimeters). Longer
brighter. focal lengths result in narrower angles of view and the subject is magnified. Shorter
focal lengths result in wider angles of view.
EV Compensation
All the combinations of the camera’s shutter speed and lens aperture that result in H.264/MPEG-4
the same exposure. A high-compression video format established by international standard
organizations ISO-IEC and ITU-T and developed by the Joint Video Team (JVT). This
Exif (Exchangeable Image File Format) codec is capable of providing good video quality at low bit rates.
A specification to define an image file format for digital cameras created by the
Japan Electronic Industries Development Association (JEIDA). Image sensor
The physical part of a digital camera that contains a photosite for each pixel in
the image. Each photosite records the brightness of the light that strikes it during
an exposure. Common sensor types are CCD (Charge-coupled Device) and CMOS
(Complementary Metal Oxide Semiconductor).
Appendixes 154

Glossary
ISO sensitivity MJPEG (Motion JPEG)

The sensitivity of the camera to light, based on the equivalent film speed used in A video format which is compressed as a JPEG image.
a film camera. At higher ISO sensitivity settings, the camera uses a higher shutter
speed, which can reduce blur caused by camera shake and low light. However, Noise
images with high sensitivity are more susceptible to noise. Misinterpreted pixels in a digital image that may appear as misplaced or random,
bright pixels. Noise usually occurs when photos are shot with a high sensitivity or
JPEG (Joint Photographic Experts Group) when a sensitivity is automatically set in a dark place.
A lossy method of compression for digital images. JPEG images are compressed to
reduce their overall file size with minimal deterioration of the image resolution. Optical zoom
This is a general zoom which can enlarge images with a lens and does not degrade
LCD (Liquid Crystal Display) the quality of images.
A visual display commonly used in consumer electronics. This display needs a
separate backlight, such as CCFL or LED, to reproduce colors. Quality
An expression of the rate of compression used in a digital image. Higher quality
Macro images have a lower rate of compression, which usually results in a larger file size.
This feature allows you to capture close-up photos of very small objects. When
using the macro feature, the camera can maintain a sharp focus on small objects at Resolution
a near life-size ratio (1:1). The number of pixels present in a digital image. High resolution images contain
more pixels and typically show more detail than low resolution images.
Metering
The metering refers to the way in which the camera measures the quantity of light
to set the exposure.
Appendixes 155

Glossary
Shutter speed
Shutter speed refers to the amount of time it takes to open and close the shutter,
and it is an important factor in the brightness of a photo, as it controls the amount
of light which passes through the aperture before it reaches the image sensor. A
fast shutter speed allows less time to let light in and the photo becomes darker and
more easily freezes subjects in motion.
Vignetting
A reduction of an image’s brightness or saturation at the periphery (outer edges)
compared to the center of the image. Vignetting can draw interest to subjects
positioned in the center of an image.
White balance (color balance)

An adjustment of the intensities of colors (typically the primary colors red, green,
and blue), in an image. The goal of adjusting the white balance, or color balance, is
to correctly render the colors in an image.
Appendixes 156

Correct Disposal of This Product Correct disposal of batteries in this product
(Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems)
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in
This marking on the product, accessories or literature indicates that the product and this product should not be disposed of with other household waste at the end of
its electronic accessories (e.g. charger, headset, USB cable) should not be disposed their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that
of with other household waste at the end of their working life. To prevent possible the battery contains mercury, cadmium or lead above the reference levels in EC
harm to the environment or human health from uncontrolled waste disposal, please Directive 2006/66. If batteries are not properly disposed of, these substances can
separate these items from other types of waste and recycle them responsibly to cause harm to human health or the environment.
promote the sustainable reuse of material resources.
To protect natural resources and to promote material reuse, please separate
Household users should contact either the retailer where they purchased this batteries from other types of waste and recycle them through your local, free
product, or their local government office, for details of where and how they can take battery return system.
these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product and its electronic accessories should not be
mixed with other commercial wastes for disposal.
PlanetFirst represents Samsung Electronics' commitment to

sustainable development and social responsibility through
eco-driven business and management activities.
Appendixes 157

Index
A B C D
AF-assist light Battery Camera maintenance 137 Date/Time Set 133
Location 20 Caution 143 Camera specifications 149 Deleting files 88
Settings 134 Charging 24
Capturing an image from video 94 Digital Image Stabilization (DIS) 39
AF Sound 131 Inserting 23
Charging 24 Digital zoom 38
AllShare Play 125 Beauty Palette mode 58
Children mode 52 DIRECT LINK button 22
Auto Backup 118 Beauty Shot mode 54
Cleaning Disconnecting the camera 100
Auto Contrast Balance (ACB) Blink Detection 74
Camera body 137 Display brightness 132
Playback mode 97 Brightness Display 137
Shooting mode 76 Playback mode 97 Display type 34
Lens 137
Auto Exposure Bracket (AEB) 79 Shooting mode 75
Close-up Shot mode 56
AutoShare 114 Burst modes E
Connecting to a computer
Auto Exposure Bracket (AEB) 79 Editing photos 95
A/V port 20 Mac 101
Continuous 79 Editing videos
Windows 100
Motion Capture 79 Capturing 94
Contrast
Playback mode 97 Trimming 93
Shooting mode 80 Enlarging 89
Error messages 136
Exposure 75
Appendixes 158

Index
F G Red-eye 98 M
Face Detection 73 Guide Line 131 Saturation Macro 71
Playback mode 97
Flash Shooting mode 80 Magic Frame mode 57
Auto 68 H Sharpness 80 Memory card
Fill in 68 Half-press shutter 41 Image quality 65 Caution 141
Off 67 Insert 23
Home screen 28 Imprint 134
Red-eye 68
Intelli zoom 38 Menu button 21
Red-eye Fix 68
Slow Sync 68 I ISO sensitivity 69 Metering
Center-weighted 76
Focus area Icons
Multi 76
Center AF 71 Playback mode 85 J Spot 76
Multi AF 71 Shooting mode 27 Jump Shot mode 53
Tracking AF 71 MobileLink 115
i-Launcher 102
Formatting 134 Motion Capture 79
Image Adjustment L
Front display ACB 97 Movie Filter mode 60
Language settings 133
Customizing 52 Brightness Movie mode 47
Easy Self Shot 51 Playback mode 97 Live Panorama mode 49
Turning on 37 Shooting mode 75
Contrast
Playback mode 97
Shooting mode 80
Appendixes 159

Index
O R Scene mode 48 Start Image 131

Open source licenses 134 Red-eye Service center 146 Status lamp 21
Optional accessories 19 Playback mode 98 Settings 130
Shooting mode 67 Sharpness 80 T
P Remote Viewfinder 116 Shooting portraits Thumbnails 86
Photo Filter mode 59 Reset 134 Blink Detection 74 Timer
Resolution Face Detection 73 Shooting mode 66
Playback button 21
Playback mode 95 Smile Shot 73 Timer lamp 20
Playback mode 85 Shooting mode 64 Shutter button 20 Time settings 25, 133
Power button 20 Retouching faces Slide show 91 Time zone settings 25, 133
Power save mode 132 Playback mode 98 Smart Auto mode 44 Tracking AF 72
Program mode 45 Shooting mode 54
Smart Filter Transferring files
Protecting a file 88 Rotating 95 Photo shooting mode 59 Auto Backup 118
Playback mode 96 Email 120
Q S Video recording mode 60 Mac 101
Quick view 132 Saturation Smart Movie mode 46 Windows 100
Playback mode 97 Smile Shot 73 Tripod mount 20
Shooting mode 80
Sound settings 35
Split Shot mode 61
Appendixes 160

Index
U W
Unpacking 19 Website
USB port 20 Accessing 123
Uploading photos or videos 123
V White Balance 77
Video Wireless network 109
Playback mode 92
Shooting mode 47 Z
Video out 132 Zoom
Viewing files Using the zoom 37
Animated photos 91 Zoom button 21
Category 87 Zoom sound settings 81
Panoramic photos 90
Slide show 91
Thumbnails 86
TV 99
Appendixes 161

Please refer to the warranty that came with your product or
visit our website, www.samsung.com, for after-sales service or inquiries.

User Manual: DV F/DV F/DV F

Uploaded by

Copyright:

Available Formats

User Manual: DV F/DV F/DV F

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

User Manual: DV F/DV F/DV F

Uploaded by

Copyright:

Available Formats

USER

Basic troubleshooting Quick reference Contents

Basic functions Extended functions Shooting options

Playback/Editing Wireless network Settings

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

If liquid or foreign objects enter your camera, immediately disconnect all

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Copyright information Basic functions 18

Downloaded from www.Manualslib.com manuals search engine

S Normal exposure S Overexposure (too bright)

Half-press [Shutter] Press [Shutter]

Downloaded from www.Manualslib.com manuals search engine

2 Access the DIRECT LINK button option.

Downloaded from www.Manualslib.com manuals search engine

2 Turn on the AutoShare feature. 5 Capture a photo.

3 Launch Samsung SMART CAMERA

Downloaded from www.Manualslib.com manuals search engine

2 Access the MobileLink mode. 5 On the smart phone or camera,

Downloaded from www.Manualslib.com manuals search engine

Using Remote Viewfinder

2 Access the Remote Viewfinder 5 Touch and hold to focus, and

3 Launch Samsung SMART CAMERA

Downloaded from www.Manualslib.com manuals search engine

Shooting samples – Macro 1 Select the macro option ( ).

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Basic functions................................................................................................................. 18 Extended functions ....................................................................................................... 43

Downloaded from www.Manualslib.com manuals search engine

Shooting options............................................................................................................ 63 Using Face Detection .............................................................................................. 73

Downloaded from www.Manualslib.com manuals search engine

Playback/Editing............................................................................................................. 84 Wireless network .......................................................................................................... 108

Downloaded from www.Manualslib.com manuals search engine

Settings ............................................................................................................................. 129

Appendixes ..................................................................................................................... 135

Downloaded from www.Manualslib.com manuals search engine

Unpacking ……………………………………… 19 Selecting options or menus …………………… 32

Downloaded from www.Manualslib.com manuals search engine

Camera AC adapter/USB cable

Camera case A/V cable

Rechargeable battery Strap

Battery charger Memory card/Memory card adapter

Quick Start Guide

Downloaded from www.Manualslib.com manuals search engine

Front LCD button

Front display Internal antenna*

USB and A/V port

Battery chamber cover

Downloaded from www.Manualslib.com manuals search engine

Button Description Button Description

Delete files in Playback mode. Confirm the highlighted option or menu.

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Removing the battery and memory card

Slide the lock up to release the

Downloaded from www.Manualslib.com manuals search engine