PvMax Product Sheet PDF
PvMax Product Sheet PDF
PvMax
Aluminum ballasted photovoltaic ground mount system
The core strength of the PvMax lies in the large spans achieved using
the uniquely designed S-Profile rails. The S-Profile rails enable long
spans, resulting in a low number of required supports, thereby reducing the
number of concrete foundations needed. Made of aluminum, the PvMax is
easily installed requiring no heavy machinery.
Applications
Using cast-in-place concrete block foundations, the PvMax is ideal for:
• Small and medium-sized PV systems
• When pile driven posts are not possible (e.g., sites where soil is too soft
or too rocky, landfill sites, or inaccessible locations) Order PvMax online at www.pvpowersite.com!
• Repeatable residential ground-mount installations Ideally suited for projects of 50 kW or smaller in size,
using 60 or 72 cell modules, the PV Powersite makes
For United States, visit www.schletter.us or call 888-608-0234 or for ordering convenient and fast. Users are provided
Canada, visit www.schletter.ca or call 519-946-3800 to speak to a Schletter with a permit-ready package which includes:
representative for more information. • Structural acceptance letter
• System drawings
• Parts list
I400050
¹ The PvMax is evaluated for electrical bonding only. The PvMax meets all IBC and ASCE requirements for structural loading; it was not evaluated for loading under
UL 2703.
1
/3
© Schletter Inc. | Updated 10/2017 | V2 | Subject to change without notice
PRODUCT SHEET
Mounting Options
Technical Data
Concrete: Cast-in-place or pre-cast concrete
Foundation Options
Other: compatible with ground screws, pending engineering review
See installation manual for approved module list for UL Ed.1 requirements. For modules not on list,
Module Compatibility
contact your Schletter representative.
S-Series profiles: ProKlip-Q (129012-001) and ProKlip 2000-P (129012-002), snaps onto lower edge
Cable Management
of purlins
IBC 2006, 2009, 2012, or 2015 (ASCE 7-05, ASCE 7-10) with local amendments
Structural Design Standards National Building Code of Canada compliant
PE Wet Stamps available
Wind Tunnel Validation
Testing and Certifications Conforms to UL 2703
Certified to ULC/ORD STD C1703
2
/3
© Schletter Inc. | Updated 10/2017 | V2 | Subject to change without notice
SCHLETTER GMBH (Headquarters)
Gewerbegebiet an der B15
Alustraße 1
83527 Kirchdorf / Haag i.OB
DEUTSCHLAND
SCHLETTER (Shanghai)
Solar Technology Co., Ltd
677 Beihe Gong Road
Jiading, Shanghai
201807 PR CHINA
SCHLETTER Inc.
1001 Commerce Center Drive
Shelby, North Carolina 28150
USA