Scribd
Upload
54 views1 page

Slab Sujata

This document summarizes the design of a one-way slab with one long edge discontinuous. It includes calculations for [1] required thickness, [2] loads, [3] design moments, and [4] reinforcement requirements. The slab thickness required is 93mm, but 127mm is provided. Reinforcement is calculated for short and long spans at support and mid-span locations. All provided reinforcement meets or exceeds requirements.

Uploaded by

11520035
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views1 page

Slab Sujata

This document summarizes the design of a one-way slab with one long edge discontinuous. It includes calculations for [1] required thickness, [2] loads, [3] design moments, and [4] reinforcement requirements. The slab thickness required is 93mm, but 127mm is provided. Reinforcement is calculated for short and long spans at support and mid-span locations. All provided reinforcement meets or exceeds requirements.

Uploaded by

11520035
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DESIGN OF SLAB

Case3
One Long Edge Discontinuous
1 Span Short span Lx = 3.353 m
Long span Ly = 3.658 m OK
2
fck 20 N/mm
fy 500 N/mm2
Clear Cover 25 mm
Dia of Bar (Short Dir ) 8 mm
Dia of Bar ( Long Dir ) 10 mm
Aspect ratio Ly/Lx = 1.1 Two Way Slab
2 Modification Factor 2.000
Thickness of slab required 93 mm
Thickness of slab provided 127 mm SAFE fs pt fs Taken
Effective depth of slab (Short Dir) 98 mm Steel Stress 49.41 0.4037 120
Effective depth of slab ( Long Dir ) 89 mm
3 Imposed Load MF 2.00
Live load LL = 2.0 KN/m2 (Refer Sheet L LOADS)
Floor finish FF = 1.0 KN/m2 (Refer Sheet L LOADS)
2
Loads for Partition Walls 0.0 KN/m
4 Dead load 3.175 KN/m2
Total load 6.2 KN/m2
W u x Lx2 = 104.1222 KN m
5 Design moments :
2
Coff. Mu Mu/bd pt
Short Support 0.043 4.52 0.47 0.111
Mid span 0.033 3.39 0.35 0.083
Long Support 0.037 3.85 0.49 0.115
Mid span 0.028 2.92 0.37 0.087
Design Summary
6 Reinforcement Requirements
pt Ast Rqrd Dia S Provided Ast ProvidedS Rqrd pt Provided
Short Support 0.111 1.09 10 127 c/c 6.18 720 0.631 OK
Mid span 0.083 0.81 8 127 c/c 3.96 619 0.404 OK
Long Support 0.115 1.03 10 254 c/c 3.09 766 0.347 OK
Mid span 0.087 0.77 8 254 c/c 1.98 652 0.222 OK
Depth of Slab 127 mm

slab roma

You might also like