Scribd Logo
Upload

Welcome to Scribd!

  • 36 views

    Seamless Circular Tubes of Non-Alloy Steels With Special Quality Requirements

    Uploaded by

    Wiryanto Dewobroto
    This document outlines the chemical composition, mechanical properties, dimensions, tolerances, lengths, protection, marking, and certification requirements for seamless circular tubes made of non-alloy steels according to EN 10220 and DIN 1629 standards. It specifies the allowed carbon, manganese, silicon, sulfur, phosphorus, nitrogen, and aluminum content for steel grades St 37.0, St 44.0, and St 52.0. It also provides the minimum yield strength and tensile strength requirements as well as the minimum elongation percentages allowed for each steel grade based on wall thickness.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Seamless Circular Tubes of Non-Alloy Steels With Special Quality Requirements

    Uploaded by

    Wiryanto Dewobroto
    36 views2 pages
    This document outlines the chemical composition, mechanical properties, dimensions, tolerances, lengths, protection, marking, and certification requirements for seamless circular tubes made of non-alloy steels according to EN 10220 and DIN 1629 standards. It specifies the allowed carbon, manganese, silicon, sulfur, phosphorus, nitrogen, and aluminum content for steel grades St 37.0, St 44.0, and St 52.0. It also provides the minimum yield strength and tensile strength requirements as well as the minimum elongation percentages allowed for each steel grade based on wall thickness.

    Original Title

    20140723122934e042ae470cb04e9617038c23aea3f3bd

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines the chemical composition, mechanical properties, dimensions, tolerances, lengths, protection, marking, and certification requirements for seamless circular tubes made of non-alloy steels according to EN 10220 and DIN 1629 standards. It specifies the allowed carbon, manganese, silicon, sulfur, phosphorus, nitrogen, and aluminum content for steel grades St 37.0, St 44.0, and St 52.0. It also provides the minimum yield strength and tensile strength requirements as well as the minimum elongation percentages allowed for each steel grade based on wall thickness.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    36 views2 pages

    Seamless Circular Tubes of Non-Alloy Steels With Special Quality Requirements

    Uploaded by

    Wiryanto Dewobroto
    This document outlines the chemical composition, mechanical properties, dimensions, tolerances, lengths, protection, marking, and certification requirements for seamless circular tubes made of non-alloy steels according to EN 10220 and DIN 1629 standards. It specifies the allowed carbon, manganese, silicon, sulfur, phosphorus, nitrogen, and aluminum content for steel grades St 37.0, St 44.0, and St 52.0. It also provides the minimum yield strength and tensile strength requirements as well as the minimum elongation percentages allowed for each steel grade based on wall thickness.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    EN 10220, DIN 1629

    Seamless circular tubes of non-alloy steels


    with special quality requirements
    Chemical composition

    Steel grade Elements content, %


    C Mn Si S P N* Al
    Not more
    St 37.0 0.17 - - 0.040 0.040 0,009 -
    St 44.0 0.21 - - 0.040 0.040 0.009 -
    St 52.0 0.22 1.60 0.55 0.040 0.035 - ≥0.02

    Note:
    Exceeding the specified Nitrogen content exceeding is possible if for every 0,001% of Nitrogen the Phosphorus content goes down by 0,005 % from the
    specified value, but not more than 0,012% in heat analysis.

    15
    Mechanical properties
    Yield strength, REH N/mm2
    Elongation А, %
    For wall thickness, mm
    Steel grade Tensile strength Rm, N/mm2
    ≤16 >16≤40 >40≤65 Longitudinal direction Transverse direction

    Not less Not less


    St 37.0 235 225 215 350-480 25 23
    St 44.0 275 265 255 420-550 21 19
    St 52.0 355 345 335 500-650 21 19

    Hot-rolled
    Outside
    3,2 3,6 4,0 5,0 6,3 8,0 10,0 12,5 14,2 16,0 20,0 25,0 30,0 32,0 36,0 40,0 45,0 50,0 55,0 60,0 65,0
    diameter, mm
    33,7
    42,4
    48,3
    60,3
    76,1
    88,9
    101,6
    114,3
    139,7
    168,3
    177,8
    193,7
    219,1
    244,5
    273,0
    323,9
    355,6

    Dimensional tolerances
    Outside diameter, mm Outside diameter permissible deviation
    Up to 100 ± 1 % (but not less than ±0.5 mm)
    Above 100 up to 200 ±1%
    Above 200 ±1%

    Wall thickness permissible deviation


    For OD up to 130 mm For OD above 130 mm and up to 320 mm and wall thickness S For OD above 320 mm
    + 15% + 12.5% ±9% + 17.5% + 15% ±12.5% + 20% + 15% + 12.5%
    - 10% - 10% - 12.5% - 10% - 15% - 12.5% - 10%

    Lengths
    Pipes are supplied with lengths according to standard requirements.
    Any lengths different from the standard ones are subject to additional negotiations.

    Protection
    Pipes are supplied:
    - black and bare
    - external varnished with black or clear lacquer
    - oiled
    Upon request pipes ends are protected with plastic caps.

    Marking
    Pipes are supplied with marking according to standards and customer requests.
    Marking is painted and/or hard stenciled on pipe ends. The same data, as well as additional information according to customer’s request, are indicated on
    the bundle tags.

    Certification
    Pipes are supplied with 3.1. inspection certificate, in conformity with EN 10204.

    16

    You might also like