Scribd
Upload
29 views

Add A Comment

This document discusses Dynamic Host Configuration Protocol (DHCP) and how to install and configure it on a Windows 2000 server. DHCP dynamically assigns IP addresses and network configuration settings to clients on the network. It works by leasing IP addresses to clients for a period of time through a negotiation process. The document outlines how to install DHCP using Add/Remove Programs or Configure Your Server, and explains important DHCP concepts like scopes, reservations, and leases that need to be configured for DHCP to function properly.

Uploaded by

Arjun Kumar
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
29 views

Add A Comment

This document discusses Dynamic Host Configuration Protocol (DHCP) and how to install and configure it on a Windows 2000 server. DHCP dynamically assigns IP addresses and network configuration settings to clients on the network. It works by leasing IP addresses to clients for a period of time through a negotiation process. The document outlines how to install DHCP using Add/Remove Programs or Configure Your Server, and explains important DHCP concepts like scopes, reservations, and leases that need to be configured for DHCP to function properly.

Uploaded by

Arjun Kumar
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

 Add a Comment

 Print
 Share This

Installing and Configuring DHCP


By Curt Simmons

If you have worked with Windows NT at all, you are probably familiar with Dynamic Host
Configuration Protocol (DHCP) — a server service that enables the server to dynamically assign
IP addresses to network clients. Because Windows 2000 networking has TCP/IP as its
foundation, DHCP also plays an important role in Windows 2000 networks.

For the exam, you need to know how to install and configure DHCP on a Windows 2000 server,
as well as how to manage its operations.

What is DHCP, anyway?


DHCP (Dynamic Host Configuration Protocol) is a server service that dynamically assigns, or
leases, IP addresses and related IP information to network clients. At first glance, this may not
seem like an important task. However, you have to remember that, on a TCP/IP network, each
network client must have a unique IP address and an appropriate subnet mask. Without these
items, a client cannot communicate on the network. For example, if two clients have the same IP
address, neither will be able to communicate on the network.

Back in its early days, TCP/IP gained the reputation of being a high-overhead protocol — it
required more configuration than other networking protocols. The prospect of having to visit
each client machine and manually enter a correct IP address and subnet mask without making a
duplication error was enough to give network administrators severe panic attacks.

DHCP handles all this work automatically. Each client gets a unique IP address, subnet mask,
and other IP information such as default gateways and the IP addresses of WINS (Windows
Internet Name Service) and DNS (Domain Name System) servers. DHCP makes certain that no
clients have duplicate addresses, and this entire process is invisible to network administrators and
network users. As you can see, DHCP is very important, and the exam expects you to know how
to install and configure it.

How does DHCP work?


DHCP works by leasing IP addresses and IP information to network clients for a period of time.
For the lease to happen, the following negotiation process occurs:
1. During the boot process, a client computer that is configured as a DHCP client sends out a
broadcast packet called DHCPDISCOVER. This Discover packet contains the client's computer
name and Media Access Control (MAC) address so the DHCP servers can respond to it.
Basically, the Discover packet says, "I'm looking for a DHCP server who can lease an IP
address."

2. DHCP servers on the network respond to the broadcast with a DHCPOFFER. In essence, the
DHCPOFFER says, "I am a DHCP server and I have a lease for you." If several DHCP servers
respond to the request, the client accepts the first offer that it receives.

3. The client responds via a broadcast message called a DHCPREQUEST. This message
basically says, "I accept your lease offer and would like an IP address." If other DHCP servers
made offers, they also see their lease offers were not accepted by the broadcast message, so they
rescind their offers. (They must not like getting snubbed by a client computer.)

4. The DHCP server whose offer was accepted responds with a DHCPACK message, which
acknowledges the lease acceptance and contains the client's IP address lease as well as other IP
addressing information that you configure the server to provide. The client is now a TCP/IP
client and can participate on the network.

Keep in mind that a lease is for a period of time. Typically, a client can keep its IP address for
several days (or whatever you configure). When half the lease time expires, the client attempts to
renew its lease for the IP address. After a client obtains the lease for an IP address, it attempts to
keep the lease by renewing it over and over. If unsuccessful, the client simply must get a new IP
address lease.

Reviewing important DHCP terms


You should memorize the DHCP terms listed in Table 1, because you need to know them for the
exam.

Table 1: Important DHCP Terms

DHCP Term What It Means

Scope A full range of IP addresses that can be leased from a particular DHCP server.

Superscope A grouping of scopes used to support logical IP subnets that exist on one
physical IP subnet (called a multinet).

Multicast A scope that contains multicast IP addresses, which treat multicast clients as a
Scope group. Multicast is an extension of DHCP and uses a multicast address range of
224.0.0.0 to 239.255.255.255.

Address Pool The IP addresses in a scope that are available for lease.
Exclusion A group of IP address in the scope that are excluded from leasing. Excluded
Range addresses are normally used to give hardware devices, such as routers, a static IP
address.

Reservation A means for assigning a permanent IP address to a particular client, server, or


hardware device. Reservations are typically made for servers or hardware
devices that need a static IP address.

Lease The amount of time that a client may use an IP address before the client must re-
lease the IP address or request another one.

Installing DHCP
As with other networking components in Windows 2000 Server, you can install DHCP in either
of two ways:

 Using Add/Remove Programs in the Control Panel

 Using the Configure Your Server tool

Like most other Windows 2000 components, DHCP functions as a Microsoft Management
Console (MMC) snap-in. After you install DHCP, you must configure the service for operation.

To open the DHCP Manager, click Start --> Programs --> Administrative Tools --> DHCP. The
right pane within the snap-in tells you that you must configure the service.

DHCP does not begin leasing IP addresses and it is not functional until an administrator
configures it.

Read more: http://www.dummies.com/how-to/content/installing-and-configuring-


dhcp.html#ixzz1DdJeSSNp

You might also like