Timber Windows

TIMBER WINDOWS
T E C H N I C A L S P E C I F I C AT I O N G U I D E
JELD-WEN® Contents
Introduction 3
Environmental 4-5
Since 1960, when JELD-WEN® began as a small
millwork plant in the United States, we’ve been Building Regulations 6-9
completely dedicated to creating a range of reliable Bay Windows 10-12
products for all our customers around the world.
Sliding Sash Bays 13
Today, we’re a leading global producer of doors,
windows and related products with the largest Glazing 14-15
stock available in the UK. Site Practices 16-17
JELD-WEN UK Installing Timber Windows 18-21
JELD-WEN UK offers a range of windows in both hardwood and
softwood, from plain casement to fully reversible and sliding sash Factory Finishing 22-23
style timber windows, supplied with our latest Hi-build fully finished
paint system provide excellence excellence in performance, long life, Sovereign Stormsure Windows 24-38
reliability and low maintenance.
Fully Glazed Sliding Sash 39-43
Modern Housing Schemes, particularly inner city regeneration,
demand high performance, security and convenience of use. All Clear Hi Profile Combi 44-46
With some of the most efficient and up-to date machinery in the
industry, all our timber window ranges are manufactured to the
highest standards, all of which have been approved by the British
Product Limitations by Range 47
Woodworking Federation’s (BWF) Timber Window Accreditation
Scheme (TWAS). Roof Windows 48
JELD-WEN UK timber windows are licensed under the BSI Timber Door Frames and Doorsets 49-50
window scheme. Licence No. KM 95847 (www.bsi-global.com).
The Supply & Fit Service

Public Sector, Private sector, Registered Social Landlord, National
or Regional Housebuilder with over £10 million of annual supply
& fit contracts supplied we have a service to support your project.
Co-ordinated from our Melton Mowbray manufacturing site
all aspects of the contract are managed from start to finish
encompassing initial enquiry, scheduling, sales order procedures,
pre-site and pre-start meetings, health & safety documentation,
product control and on-site installation.
This service is available for certain projects only please contact

us to discuss your individual requirements.
Teamwork
From Housebuilder to Registered Social Landlord we have a nationwide
sales team devoted to the needs of your market sector, supported
by a factory focussed on developing our product offering along with
our first class customer service. Further support comes from our
world class Research & Development offices based in Sheffield.
Customer Care
We have developed a dedicated Customer Care team able to offer
a comprehensive service incorporating a controlled document
procedure allowing greater visibility.
02
Introduction
Sovereign Stormsure Windows

Sovereign Stormsure windows are made from
European redwood or dark red hardwoods
and are designed to meet the demanding
requirements of today’s market. The range
includes Casement, Cottage Bar, Horizontal Bar,
All Bar and Regency Styles.
Sliding Sash Windows

This unique range of windows incorporate
stepped sashes for improved performance whilst
retaining traditional sight lines. All windows
have extended horns on the top sash and flush
to frame sills as standard and available in Non
Bar, Marginal Bar, Vertical and All Bar styles.
Hi–Profile Combi Windows

The JELD-WEN UK Hi-Profile Combi window
range offers the architect and specifier total
flexibility in window design and configuration,
combined with optimum long term use and
maintenance. Incorporating all modes of
operation side and top hung, and fully reversible.
03
Environmental
JELD-WEN UK’s success as a world-class

company is, in part, dependant on responsible
environmental stewardship, including our
approaches to natural resources, waste
management and recycling, energy efficiency,
air and water emissions, and indoor air quality.
Our long-standing vertically integrated

operational model bolsters our ability to maximise
resources and provide excellent visibility of the
procedures up and down the manufacturing and
distribution chain.
JELD-WEN UK employees are committed

to ensuring that JELD-WEN UK’s operations
proactively comply with applicable environmental
laws and regulations for the implicit purpose of
protecting human health and the environment.
JELD-WEN UK employees are encouraged
to identify opportunities for integrating
environmentally favourable solutions into
operations, as well as, into the long-term
benefits of the products we manufacture.
Chain of Custody Certification

All JELD-WEN UK softwood timber windows
and doorframes are manufactured from PEFC
certified timber supported by full Chain of
Custody Certification.
04
EcoHomes
The EcoHomes scheme permits housebuilders
and designers to have their home designs
assessed, considering key issues such as energy
efficiency, transport facilities, security and
materials selection. It is structured so that the
assessment can be carried out at specification,
housetype and site specific stages of development.
The EcoHomes standard defines 4 tiers of

compliance, which can be used to gain credits;
all JELD-WEN UK softwood windows achieve
Tier level 2 according to the rules of the
EcoHomes guidance 2006 issue 1.1. Credits can
be claimed under section ‘Responsible sourcing
of Materials: Finishing Elements’. To claim these
credits timber needs to be one of the four
materials selected that make up the largest
contribution by volume. Your EcoHomes assessor
will give further guidance.
The Green Guide to Housing Specification gives

a summary rating of A to pre-treated softwood
double glazed window frames, painted inside
and out. There are credits available under the
‘Environmental impact of materials section’
of the EcoHomes scheme for using elements
that obtain an A rating from the Green Guide
for Housing.
Further credits are also available under the

‘Construction Site Impacts’ section where
80% of site timber is reclaimed, reused or
responsibly sourced.
The introduction of the government’s Code

for Sustainable Homes is likely to replace
the EcoHomes scheme.
Timber Preservation
JELD-WEN UK protect our external timber
products with the market leading Protim 418V
preservative system. Protim 418V is a modern,
industrial, organic solvent based wood preservative
containing no ‘red list’ biocides. Application is by
vacuum low pressure impregnation, giving highly
effective protection against wet rot fungi, backed
by a 30 year warranty.
Protim 418V is formulated principally for the

treatment of joinery and other Hazard Class
3 components, as described in BS EN 335-1.
The latest ‘V’ grade product enables lower
quantities of organic solvent to be used in
the process than with more traditional wood
preservatives. Treatment is in accordance with
BS 8417, 30 year desired service life.
With some of the most efficient and up-to-date

machinery in the industry, all our factories make
products to the highest standards, and all our
management systems are independently
assessed and meet the requirements of ISO
9001:2000. 05
Environmental
Building Regulations
06
The first building controls in the UK date
back to the 1660’s when legislation was
introduced to minimise the risk of fire in
buildings following the fire of London.
Since then controls on construction activity
have developed through necessity with
the advent of the industrial revolution,
the influx of people into cities and the
increasing population. The following
pages offer guidance on compliance with
the relevant regulations influencing the
specification of timber windows.
Performance figures for our products are Conservation of Fuel and Power Ventilation
contained in the relevant product sections
of this guide. Updated figures can be found ENGLAND AND WALES AD L1A AND AD L1B ENGLAND AND WALES APPROVED DOCUMENT F
on our website:
SCOTLAND SECTION 6 SCOTLAND SECTION 3
www.jeld-wen.co.uk
NORTHERN IRELAND TECHNICAL BOOKLET F NORTHERN IRELAND TECHNICAL BOOKLET K
Full Guidance on the Building Regulations
for England and Wales can be found at the
Department for Communities and Local
Government website:
www.communities.gov.uk Means of escape from fire Smoke Ventilation
Guidance on the Building Regulations for ENGLAND AND WALES APPROVED DOCUMENT B ENGLAND AND WALES APPROVED DOCUMENT B
Scotland can be found at the Scottish Building
Standards Agency website: SCOTLAND SECTION 2 SCOTLAND SECTION 2
www.sbsa.gov.uk NORTHERN IRELAND TECHNICAL BOOKLET E NORTHERN IRELAND TECHNICAL BOOKLET E
Guidance on the Building Regulations for

Northern Ireland can be found at the
Department of Finance and Personnel website:
www.dfpni.gov.uk Glazing – Safety Protection from Falling
ENGLAND AND WALES APPROVED DOCUMENT N ENGLAND AND WALES APPROVED DOCUMENT K
AD = Approved Document SCOTLAND SECTION 4 SCOTLAND SECTION 4

TB = Technical Booklet
Sections are from the Technical NORTHERN IRELAND TECHNICAL BOOKLET V NORTHERN IRELAND TECHNICAL BOOKLET H
Handbook covering domestic buildings.
07
Building Regulations
Other regulatory b) in some circumstances, if the smaller

influences / Accreditation dimension of the pane is 250mm or less
and it's area is 0.5m2 or less then glass with
BS 8300:2001
a nominal thickness of 6mm not conforming
Design of buildings and their approaches
to class B of BS 6206 may be used.
to meet the needs of disabled people –
Code of practice.
British Woodworking Federation’s Timber JELD-WEN UK supply factory glazed windows
Window Accreditation Scheme above 1350mm with the low level units as
BS 6262:Part 4:1994
toughened (tempered) safety glass.
Code of Practice for Glazing for Buildings
JELD-WEN UK’s timber window ranges are
Part 4. Safety related to human impact.
accredited by this independent scheme. Sound attenuation through windows
Further details of this scheme can be found Increased awareness of external noise nuisance
Further details of these standards can
at: www.bwf.org.uk has increased the requirement for windows
be found at the BSI website:
www.bsi-global.com with good acoustic performance to be specified.
Glass in critical locations Planning consents given on sites in inner cities
Where glazing is situated in a window where or near to railways, major roads or airports now
it is likely to be subject to accidental human require high levels of acoustic performance.
impact, precautions should be taken to reduce Often these can be easily met, and even omitting
the risk of injuries by: the trickle ventilator in the window head will
substantially improve acoustic performance.
a) selecting glazing of a suitable type,
Higher acoustic performance can be achieved
thickness and size, primarily with reference
by use of special glazing, or by triple acoustic
to impact behaviour and safety characteristics
BS 7950 Secured by Design glazing. JELD-WEN UK has experience in meeting
as established by testing in accordance
Where indicated our frames can comply such requirements. For more information contact
with BS 6206
with the requirements of BS7950: 1997 our Technical Helpdesk on 01302 394541 or
for security performance of casement b) providing mechanical protection to the glazing [email protected]
windows in domestic applications. c) enhancing a person's awareness of the
presence of transparent glazing Acoustic performance tables are shown within
Further details of the Secured by Design each window range section. This information
Scheme can be found at: If glazing does not have permanent will be regularly updated and published on
www.securedbydesign.com screen protection; our website.
a) for glazing wholly, or partly, within 300mm .

from a door and within 1500mm from the
floor or in other locations within 800mm
of the floor the pane will be toughened
Important or laminated and will conform, when tested,
Under Secured by Design rules, Fire Egress to class B of BS 6206
windows are required to have laminated
glass externally and annealed Low E glass
internally. Safety Glazing Locations made simple
Local SBD requirements may differ so

when specifying windows, it is essential
to check whether 100% use of laminated
glass is a requirement.
300mm 300mm
1500mm
Also where a window is placed adjacent to HIGH
a door, at low level or in a hazardous area, WINDOW 2100mm
it will be necessary to have toughened

glass internally in addition to laminated
glass externally.
It is the customer’s responsibility to request

1500mm
the correct specification at time of 800mm 800mm
quotation and ordering.
BLUE SHADED AREAS INDICATE THE CRITICAL LOCATIONS WHERE SAFETY GLAZING MUST BE USED. FINISHED FLOOR LEVEL
08
Useful Information
BS644 Co-ordinating Sizes Explained
Coordinated brickwork module window sizes
EQUAL DIVIDE RANGE BS644 2 BRICK MODULE STANDARD BRICK 215 X 102.5 X 65,
STANDARD 10mm PERPS BETWEEN BRICKS
STUCTURAL OPENING 493 635 920 1205 1775 2344 1 LIGHT 2 LIGHT 3 LIGHT 4 LIGHT
WINDOW WIDTH 483 625 910 1195 1765 2334 STUCTURAL OPENING 460 910 1360 1810
WINDOW WIDTH 450 900 1350 1800
METRIC MODULAR BS644

RANGE 2.5 BRICK MODULE STANDARD BRICK 215 X 102.5 X 65,
STUCTURAL OPENING 300 600 900 1200 1800 2400

WINDOW WIDTH 290 590 890 1190 1790 2390 1 LIGHT 2 LIGHT 3 LIGHT 4 LIGHT
STUCTURAL OPENING 572.5 1135 1697.5 2260

Structural Opening Heights WINDOW WIDTH 562.5 1125 1687.5 2250
These are based on brick course heights (65mm brick + 10mm mortar course).
E.g. 900mm = 12 brick courses
3 BRICK MODULE STANDARD BRICK 215 X 102.5 X 65,

1 LIGHT 2 LIGHT 3 LIGHT 4 LIGHT
STUCTURAL OPENING 685 1360 2035 2710

WINDOW WIDTH 675 1350 2025 2700
Guarantees
In keeping with our quality policy, JELD-WEN UK offers 6 year guarantee on 10 year guarantee on
the following guarantees on its products:
30 year guarantee
$ Hi-build factory stained
external joinery
insulating glass units
against fungal attack

Finished joinery is guaranteed against blistering, Only insulating glass units supplied by JELD-WEN UK are
cracking, flaking or erosion excluding natural resin covered by this Guarantee, these are stamped and
extrudation and movement around knots. Annual identified accordingly.
Against rot and fungal attack on all external timber inspection should be made and touching up carried out
components (excluding external flush and redwood doors). as necessary in areas of wear and tear (for example, Note: Site re-glazing costs are not covered by
Guarantee continuous, conditional on following our exposed areas of window sills or where the paint film this guarantee. Where windows are supplied factory
recommendations below. has been breached). glazed all elements of the glazing system are covered
by this guarantee.
10 year guarantee against This guarantee to the finished product is also
manufacturing defects on condition that: These guarantees are subject to JELD-WEN UK Terms
• No physical or chemical damage to the window or and Conditions of Sale. Defects that are caused in
coating has occurred. whole or in part by failure to adhere to JELD-WEN UK
• No repairs or alterations to the surrounding recommendations relating to storage, handling,
On all products against manufacturing defects installation, decoration, glazing and maintenance,
buildings have occurred which are detrimental to
(excluding redwood doors, ironmongery, fixtures and are not covered by these guarantees.
the joinery performance.
fittings – unless stated otherwise). JELD-WEN UK will
• No failure of the coating has occurred caused by
accept no responsibility for products cut down in size
failure of ancillary products, or glazing.
after receipt, or when utility or structural strength is
• No damage to the coatings has occurred prior to, or
impaired in fitting or application of hardware.
during, installation.
• No damage to the coating has occurred, caused by
10 year guarantee on
bad maintenance of the building
Hi-build factory painted
or poor design of the building.
external joinery
09
Bay Windows
Bay windows; Installation Recommended Detail 2

and Compliance with Part L Returned Cavity
Bay windows, whether square or splay (angled) In this arrangement the brickwork is brought
require careful consideration when planning up to the edge of the window, using angle or
building detail and installation. The Building cut brick, reproducing the joint between a flat
Regulations, Approved Document L, require that window and the wall. This gives a good thermal
the thermal performance around openings achieve detail and an elegant, attractive appearance.
levels that some traditional methods of bay
window installation cannot meet. (The same Recommended Detail 3
applies to plain flat windows, but in those Extended Jambs and/or Corner Posts
situations, the solution is relatively By adding an angled timber extension piece to
straightforward.) the bay window jamb, the frame can effectively
be altered to form a square edge to build to,
Traditionally, the various types of bays were set and simplify the brickwork. While easier to
against plain brickwork with the joints made by build, this can produce a bulky appearance
butting the jambs, or corner posts, up to the internally, particularly on smaller bays.
brickwork. In some situations a “birds-mouth”*
detail was used to set the bay window into the Bay Window Sills
corner of the brickwork. Most of these details
create a “cold bridge” at this joint, unacceptable As with all windows today, attention to bay
under current Regulations. window sill detail is also very important. To meet
the requirements of the published “Robust
The Solution: Detail” and achieve a 30mm overhang of the
window frame over the cavity, a 158mm wide
There are several ways of ensuring compliance sill is essential when using plain brickwork. If a
with Part L, and not one “right” solution. cant brick or similar detail is used, sill width will
In this brochure we illustrate two recommended be different.
details, but there are others. All our bay window
dimensions stated on these pages refer to Note: The insulation of the (horizontal) roof and
the actual brickwork. This enables architects underside details of bay windows also require
and builders to plan the brickwork detail in careful attention to ensure compliance, particularly
compliance with the Regulations as they choose. where the bay projects beyond the structure. This
Whatever method is chosen, the joint between needs to be discussed with your architect or local
the window and the structure must comply. Building Control Officer.
* BIRDS MOUTH DETAIL IS NOT SHOWN. PLEASE CONTACT JELD-WEN UK FOR MORE INFORMATION.
SQUARE BAY 1 ALL STANDARD MODULE RETURNS ARE 630
SQUARE BAY STANDARD MODULE FRONT MODULE WIDTH mm DIM A mm DIM B mm DIM C mm
2 LIGHTS ON FRONT ELEVATION 1200 1234 1439 752

SQUARE BAY 1 ALL STANDARD MODULE RETURNS ARE 488
SQUARE BAY STANDARD MODULE FRONT MODULE WIDTH mm DIM A mm DIM B mm DIM C mm

10
For Sovereign Stormsure Square Bays
(SQ) – One & Two Return Ends.
45˚ Splay Bays (SP) – One & Two
Return Ends
How to Order
Bays are made up from any combination of
windows from the Sovereign Stormsure range.
Return ends are generally 630mm wide windows
or 488mm wide if narrow module. For Square
Bays use SQ, for Splay Bays use SP.
Codes are made up as follows:
1. Two return ends SQ
One return end SQR
2. Number of lights on
front elevation. 2,3,4,5
Add N suffix if narrow light.
Add H suffix if hardwood.
3. Window codes from left to right,
viewed from outside.
4. State “As Catalogue” or “Opposite
Catalogue” if windows are handable.
Example:
SQ3/LEW112C AS/LEW312CVC/LEW112C OPP
Trickle ventilators giving 8000mm2 of free
area ventilation generally positioned centrally,
are supplied as standard with each bay.
FACE OF
EXTERNAL
BRICKWORK
11
Bay Windows
Important Special bay windows are available to order. You must provide the following information:
1) Brickwork opening dimensions (Dim B + D – where applicable).
Bay windows are not designed to be 2) Brickwork projection (External face) Dim E or C.
load bearing – if in doubt as to your 3) Installation details i.e. Part L 2002 robust detail.
requirements contact either your
architect or JELD-WEN UK technical
(01302 394 541).
FACE OF
EXTERNAL
BRICKWORK
45O SPLAY BAY AN 3.5 2 ALL STANDARD MODULE RETURNS ARE 630
45 SPLAY BAY STANDARD MODULE FRONT MODULE WIDTH mm DIM A mm DIM B mm DIM C mm DIM D mm DIM E mm
2 LIGHTS ON FRONT ELEVATION 1200 2101 1288 677 478 478


FACE OF
EXTERNAL
BRICKWORK
NB: THIS IS NOT A BIRDS MOUTH SITUATION


12
Sliding Sash Bays
How to order Square Bay

Sliding sash Square and Splay Bays can C
be made up from any combination of
windows from the Sliding Sash range.
Return
Codes are made up as follows:
B D
Square Bays with 2 return ends SQ
Square Bays with 1 return end SQR
30° Splay Bay with 2 return ends SP30
30° Splay Bay with 1 return end SPR30
A
Window codes from left to right, BAY BAY DIM A DIM B DIM C DIM D
viewed from outside. FRONT* RETURN*
1665mm 630mm 1979mm 787mm 1644mm 620mm

Example: SQ/VS0613/VS1613/VS0613
1665mm 855mm 1979mm 1012mm 1644mm 845mm
1710mm 630mm 2024mm 787mm 1689mm 620mm

Note: Dimensions given for assembled bay
1710mm 855mm 2024mm 1012mm 1689mm 845mm
window and are not brickwork dimensions.
1890mm 630mm 2204mm 787mm 1669mm 620mm
1890mm 855mm 2204mm 1012mm 1669mm 845mm

Brickwork needs to be constructed to
allow the bay installation to meet the *THESE SIZES ARE FINISHED OVERALL FRAME SIZES
guidance in building standards.
Splay Bay 45˚
Special bay windows are available to
order. You must provide the following
information: F
E
1) Brickwork opening dimensions.
2) Brickwork projection (External face). C
r n
G
tu
Re
3) Installation details i.e. Part L 2002

robust detail.
D B
A
BAY BAY DIM A DIM B DIM C DIM D DIM E DIM F DIM G

FRONT* RETURN*
1080mm 630mm 2163mm 1193mm 485mm 485mm 1054mm 617mm 686mm
*THESE SIZES ARE FINISHED OVERALL FRAME SIZES
13
Glazing
Glazing Options
ICE EFFECT* LEAF EFFECT* TULIP EFFECT*
DEW EFFECT* DIAMOND LEADED RECTANGULAR LEADED

(DIAMOND SIZE APPROX.) (RECTANGULAR SIZE APPROX.)
14
Glazing
All JELD-WEN UK timber windows are designed
to accept 24mm insulating glass units
incorporating Low E glass to comply with the
requirements of the amendments to Building
Regulations Approved Document ‘L’.
Low emissivity (Low E) has a surface coating

which substantially improves its energy
efficiency. This coating lets the sun’s rays through
but reflects heat back into the room.
Obscure Glass
Obscure glass is available in the following
patterns: Ice effect, Leaf effect, Tulip effect
and Dew effect. Shown left. Ice effect will be
supplied unless specified otherwise.
Toughened Tempered
Safety Glass
All safety glazing and insulating glass units,
where applicable, are marked with the
appropriate identification to ensure correct,
safe installation and permanent traceability.
Laminated Glass (external pane)

Recommended for an enhanced degree
of resistance against breakage and entry.
Leaded Glass
Available diamond leaded or rectangular leaded
as shown left.
Factory Double Glazing –

Recommended
Glazing is undertaken in controlled factory
conditions which ensures quality, reliability and
strict adherence to correct glazing practices,
BS 6262:1982, including a 5mm clearance
between the edge of the glass unit and the
rebate and GGF and NHBC recommendations
at all times.
For the best overall quality, we recommend

factory finishing with Hi-build stain or
Hi-build paint and factory double glazing.
Specialist Glazing Options

If your glazing requirement is not shown above
contact us with your requirements – i.e bomb
proof glass etc.
Glass Film Protection

For factory glazed windows we recommend
the glass film protection option.
* VASE AND FLOWERS ARE FOR ILLUSTRATIVE PURPOSES

ONLY AND ARE NOT PART OF THE DESIGN. 15
Site Practices
The JELD-WEN UK Cavity Closer

System for installing Timber
Windows
The cavity closer system is supplied to suit 50mm,
75mm or 100mm cavities which need to be
specified at time of ordering.
By using our cavity closer system the builder has

the opportunity to ensure accuracy in their window
apertures during construction; an engineered fit
for the windows when ready for installation; and
guaranteed compliance with Part L in closing the
cavity and correctly positioning the windows.
Fixing packs including all the necessary

components for fitting the JELD-WEN UK
window are available separately.
When ordering the window to fit into a cavity

closer, always advise on the order, “Window
to be installed into cavity closer.”
To comply with the robust details of Part L 2002,

when using the cavity closer system, windows
can be installed using the standard 158mm sill.
Depending on your building design other
sill dimensions maybe suitable and it is the
customers responsibility to ensure the correct
sill is specified at the time of ordering.
When using cavity closers in timber frame

construction, please consult JELD-WEN UK
technical department to ensure the correct
product specification is used.
Use of JELD-WEN UK Cavity Closer

system as a Fire Stop
The JELD-WEN UK Cavity Closer system
cannot be used as a fire stop in Timber
frame construction.
Fire stops are not normally required in

conventional masonary/masonary construction.
Should a fire stop be required there are a

number of proprietary products available that
can be specified for use in conjunction with
our cavity closer system.
Please contact our technical helpdesk for

further information.
16
Care of Timber Windows On Site
Timber windows are accurate components Wherever possible the sequence of deliveries Whenever possible store windows in the
designed and manufactured using the best should be co-ordinated to site requirements in sequence they will be needed with codes
available techniques to produce performance order that windows are not kept on site unfixed or identifying marks visible to avoid double
rated components. for longer than necessary. handling. Avoid dragging them across each
other if stacked.
The way they are handled and stored on site The storage place should be prepared in advance
can affect their long-term performance. Good and the windows unloaded straight into it. Windows which have projecting sills or have
practice avoids damage, maintains quality and the hardware fitted must, if stacked, have
saves money. Handle windows carefully spacers between them to avoid damage.
Windows should be lifted by the main frame
Windows are available as joinery items supplied: (not by the opening casements or the glazing
• with a primer or stain base coat for site bars) and carried in a vertical position to avoid
glazing and finishing any tendency to distort.
• as factory glazed components requiring When windows are protected by shrink

site finishing wrapping, or other protective packaging, this
• as factory glazed and fully finished windows. should be kept in place as long as possible.
Each type needs careful handling and protection Windows should be stored under cover
although the actual requirements vary slightly. Windows should be stored under cover even
if fully finished, preferably inside a building.
Delivery and Storage If they have to be stored outside they must
be kept clear of the ground on level bearers
Check windows at the time of delivery
and protected from dampness and sunlight
Windows should be checked at the time of
with a tarpaulin.
delivery to ensure that they are in accordance Preglazed windows need a little extra care,
with the order schedule, the delivery is complete to avoid damage and glass breakage. Retain
Polythene sheeting should not be used as this
and that each window, including any protective the protective packaging and make sure
can act like a greenhouse and encourage damp
packaging, is not damaged. it is not possible for water to lay in glazed
or humid conditions.
rebates by storing vertically.
For long term performance of the window There must be space for air circulation around
and finish, it is important that this moisture Preglazed and prefinished windows should
and between the windows.
content is maintained during storage on site ideally be fitted into preformed openings and
and during the construction process. BS 644: not ‘built in’ to masonry walls.
Timber Windows recommends that the moisture
content of timber windows should be between Treat windows like a piece of furniture
13% and 19% although fully factory finished Prefinished windows should retain their
windows may be of a lower moisture content. protective packaging until the latest possible
time but make sure it cannot collect water
if it has small tears in it. Care should be taken
when removing packaging to avoid damaging
the finish.
When stored inside a building, windows should

be protected from dirt and damage but without
restricting air circulation.
Protect windows during site operations

Ensure that the moisture content of the timber
is kept close to the level at which it was when
the window was manufactured.
17
Installing Timber Windows
The way in which they are installed Forming openings

can affect their performance. Good Windows can be fitted either during the
course of construction or fitted into pre-formed
installation practice avoids damage, openings at a later stage.
maintains quality and saves money.
A tight fit of adjacent materials should be
avoided where there is a danger of distortion
Windows are available as joinery items supplied
in the frame. Side tolerances however should
with a primer or stain base coat for site glazing
not exceed 10mm on each side.
and finishing, as factory glazed components
requiring site finishing or as factory glazed
When not building-in, openings can be formed
and fully finished windows.
using either proprietary templates or site
constructed templates. These templates should
Installation produce opening that are in the order of 10mm
Windows should be fitted square to 20mm larger than actual window size.
Windows should be fitted square, true and
plumb and fixed in accordance with the In exposed conditions consideration should be
manufacturer’s instructions or the project given to using a rebated check reveal (Figure 1).
specification.
Fig 1
Protect surfaces from mortar droppings.
If any part of the window is cut or drilled,

swab the newly exposed timber with a
suitable preservative material and recoat
with primer or stain.
Fitting
DPCs should be fitted as the construction
proceeds. This can be achieved either by fixing
the DPC to the frame prior to building in or by
fitting the DPC into the structure when making
pre-formed openings. In the latter case it is
often convenient to use wider DPCs than
needed (Figure 2).
Protection
With prefinished and preglazed windows Avoid forming a cold bridge when fitting windows.
the manufacturers’ protection should be left
in place unless this interferes with the integrity
of the DPC and seals. Fig 2
More care is necessary when fitting

pre-finished units.
Any timber which is cut during the course

of installation must be treated with
a compatible preservative.
Note: Cutting or damaging a window may

invalidate the manufacturers guarantee.
18
Support
Windows should be supported on durable
packings at a maximum of 150mm from
each jamb and beneath mullions. The window
should be fitted level and plumb (Figure 3).
When building-in, continuous support at sill
level can be provided by a mortar bed.
Fig 3
Support for the frame should such as to prevent

distortion and should not damage any
protection or finish.
Side packings should be located where fixings

occur and fitted without distorting the frame.
Particular care is necessary when providing

packings to sliding sash windows where even
minor distortions can prevent the movement
of the sashes or introduce excessive clearance
to sashes (Figure 4).
When fitting packings it is advisable to check

the operation of all types of windows prior
to final fixing.
19
Installing Timber Windows
Fig 4 Fig 5 Fig 7
Purpose made nylon frame fixings are available.

These utilise the same diameter hole through
the timber as well as the substrate. The fixing
is usually supplied complete with the screw.
Alternative fixings include a proprietary screw

device which enables the window to be adjusted
in position on the screw fixings (Figure 7).
Sealing
To prevent air infiltration between the window
and adjacent wall the gap between the window
and wall should be sealed. A polythene backed
sealing strip can be fitted prior to building-in or
alternatively an expanding foam seal or mineral
wool can be fitted after building-in is completed.
These will expand after a period of time to fill

the gap (Figure 6).
Fig 6
Fixing
Side fixings should be provided at 150mm
from top and bottom of frame and a maximum
450mm between c/s. Where a window exceeds
1800mm in width or is formed with two or
more units, fixings should be provided at head
and sill (Figure 5).
Special requirements may be necessary when

fixing windows into preformed openings. An additional seal can then be provided by
a silicone or polysulphide based sealant.
Unless internally fitted fixing clips are used
(Figure 6) it will be necessary to fix through Alternatively a timber cover strip can be provided
the frame. Where possible, choose unobtrusive which should be fitted over the foam seal.
locations. If a cavity closer is used refer to the This strip should be cut 10mm short of the
JELD-WEN UK fitting information leaflet. sill. This method permits any moisture which
reaches the foam seal to escape.
20
Finishing Installation options
Windows with factory applied primer or base Timber windows can be installed into all types of
coat stain should have at least one of the building designs from timber frame to traditional
finishing coats applied and the back of frames masonrary construction. JELD-WEN UK windows
should be coated before installation. It is are available with a number of optional extras to
aid installation.
recommended that decoration be commenced
as soon as possible after delivery or installation For buildings with vertical tiling or timber
(preferably within days). Prolonged exposure of cladding specify window surrounds available
bare timber or primary/base coats will affect the in 3 sizes – 70mm, 100mm & 135mm.
long-term performance of subsequent coats. All window types are available with a selection
of sill depths dependant on your design option.
Ensure surfaces and edges are in good Extended sill nosings are not a preferred design
condition before applying finishing coats option due to their vulnerability to damage and
If the primer or base coat stain has deteriorated long term erosion. If not adequately maintained
it should be recoated before further finishing this could lead to premature failure of the
coats are applied. decoration system.
If the primed / base coated windows have For certain schemes JELD-WEN UK are able to
been exposed on site without further decoration offer a fully co-ordinated supply & fit service
for longer than 3 months (either fitted in the contact us to discuss your requirements.
building or in an open storage area) the primer /
base coat must be sanded back and a fresh
primer / base coat applied.
Finishing should be carried out in dry weather

using good exterior quality materials in
accordance with our recommendation.
On external surfaces, the finish should be an

exterior quality paint or a ‘high build’ stain.
(‘Low build’ types of stain should not be
used on external surfaces.) Second coats or
undercoats must be applied within 3 months
of primed/base coated windows becoming
exposed to the elements.
It should be noted that the use of dark coloured

paint or stain finishes on windows, particularly if
located on the south or south west elevations of
buildings, will result in high surface temperatures
and can increase the risk of resin exudation
through the finish.
Factory finished windows should be checked for

any on-site damage to the finish and any small
areas made good in accordance with our
recommendations.
Site Glazing
Glazing rebates and backs of beads should
be sealed with an appropriate sealant.
Use a suitable glazing system. Avoid using

glazing compounds which can dry out.
Proprietary glazing materials, tapes or glazing
gaskets must be applied in accordance with
the manufacturer’s recommendations.
21
Factory Finishing
Timber windows, supplied with our latest Apart from an occasional wash down with As an alternative, windows can be supplied
Hi-build fully finished paint system offer a pH neutral soap solution initially and then undercoated or 2 coat stained, ready for a final
excellence in performance, long life, every 6 months, and a touch up to make coat on-site. This option is recommended where
reliability and low maintenance. good any minor damage from installation, “building-in” is planned, improving protection
or a window-cleaner’s ladder, the paint film on-site and saving time and decoration costs.
Reliability in paint performance starts with the will last and last. Never use an acid or alkali
timber itself. Careful control of the moisture brick or stone cleaner. Planned maintenance While JELD-WEN UK makes every effort
content of timber in our factory ensures windows will guarantee continued long life. to ensure frames are ready for decoration
are manufactured to match their conditions in when delivered, no guarantee of paint finish
service. Our preservation system underlies the Fully Finished and 2 Coat Part Finish or performance can be given on windows
products’ reliability matched with the preparation Windows are now supplied as standard, supplied unfinished, or finished by others.
and application of the paint system itself. manufactured from knot free engineered timber.
Finishing Options
Whether an opaque paint or translucent stain
finish is required, both start with the application Primed, Base-coat Stained • Primed at no extra cost.
of a basecoat. The paint or stain film is then built • 2 coat paint or stain.
Windows can be supplied primed, with knotting
up on this foundation, with attention to surface treatment pre-applied, or in a translucent • Fully factory finished.
preparation, cleanliness and temperature at each basecoat stain. This is the base level, from
stage. The result is a three-coat high build system which decoration must be built up on-site.
that provides a tough, durable coating that is While it is possible to get good finishes from To order your choice please
good for many years. So good, in fact, that products supplied primed or base-coated, care specify one of the following:
we put our name to it for 10 years on and attention is required to ensure knotting is • Hi-build fully finished white (other colours
opaque colours and 6 years on stains. See further applied where necessary, surfaces are available at extra cost to special order,
the guarantee section of this catalogue for clean, dry and rubbed down between coats minimum quantities of 50 frames apply.
full details. and an adequate film thickness is achieved. RAL colour required)
• Hi-build stain finish
• Part-finished white
• Part-finished stain
• Primed only
• Basecoat-stained only
Sample board of factory finish options shown

above available upon request.
22
BASECOAT STAIN PART-FINISHED STAIN HI-BUILD STAIN (BALTIC)
PRIMED (CREAM) PART-FINISHED PAINT HI-BUILD PAINT (WHITE)
Additional Hi-build Paint Finishes Additional Hi-build Stain Finish
BUTTERMILK MAGNOLIA GARDENIA BALTIC LIGHT OAK
COLOURS SHOWN ARE AS CLOSE AS PRINTING PROCESS ALLOWS.
Levels of Finishing Fully Finished Colour finishes other than those shown,
No Further coats are required on site. are available to special order quantity
Basecoat Only – Basecoat Joinery should be restrictions apply please contact us to
overcoated as soon as possible after receipt The numbers of coats depends on shade
requirements but In all cases fully finished discuss your requirements.
and certainly within 3 months of delivery
to site as guidelines laid down in line with items will have a minimum of 300 microns
British Standards. wet film (120 microns dry film) applied.
Part or Semi-Finished Installation

One Further coat is required on site, Semi It is important to avoid damage to the surface
finished products should be finished on site coating when installing fully finished windows
within 6 months of delivery. and doors. Fixing by lugs or fixing straps is
recommended, to avoid drilling through a
painted surface.
23
Sovereign Stormsure
Construction Ventilators SOVEREIGN

SOVEREIGN
Sovereign Stormsure windows are made from Flush fitting ventilators are supplied fitted as
European redwood or dark red hardwoods. standard to all Sovereign Stormsure windows. ®
All windows have an advanced preservative These provide free area of 8000mm2 on
system applied. Softwood windows are fully windows 915mm and wider, 4000mm2 on
PEFC Chain of Custody Certified.* windows below that size, down to 488mm
wide. Available in white or brown. A 'no vent'
Window Sections option is also available.
Standard finished sections are as follows:
• Frame head – 93mm x 68mm
VENTILATION PERFORMANCE FIGURES
• Frame jambs – 67mm x 56mm
• Frame sills – 158mm x 68mm FREE AREA 4000mm2 8000mm2 BS 7950 Secured by Design range
• Frame mullion – 67mm x 56mm
EQUIVALENT AREA 2747mm2 5494mm2 A security enhanced window range which
• Frame bars – 55mm x 46mm
complies with the requirement of BS 7950:
• Sash rails – 55mm x 67mm
1997 for security performance of casement
• Sash bars – 55mm x 46mm
Individual Window Range windows in domestic applications.
Glazing Performance
All windows with SBD option indicated
Window Frames are available factory glazed Stormsure BS6375
are available to this standard specification.
or unglazed. See pages 14 and 15 for full When tested in accordance with BS6375:
• Softwood window either basecoat
glazing options. Part 1: 2004 Performance of windows and
stained or primed.
doors. Classification for weather tightness
• Factory glazed with annealed Low E
Using glazing rebates of 18mm x 42mm and guidance on selection and specification.
insulating glass units.
Sovereign Stormsure windows will accept Sovereign Stormsure Windows achieve an
• Butt hinges. Top hung sashes are supplied
24mm (4:16:4) insulating glass units as exposure rating of 2000 pa and also an air
with projecting hinge as standard.
standard. The glazing system is fully drained permeability of Class 4. Sovereign Stormsure
• Shoot bolt espagnolette locking.
and vented with a sloping bottom platform. windows also meet the requirements
• Simulated divided light glazing design
A full 5mm clearance is provided between of BS6375: Part 2: 1987 Operation and
where appropriate.
the insulating glass unit and rebate, in Strength Performance.
compliance with BS 6262.
U-value Declaration
CENTRE-PANE THERMAL SOLAR TRANSMITTANCE

IGU DESCRIPTION U-VALUE OF DOUBLE TRANSMITTANCE OF OF WHOLE WINDOW
GLAZED UNIT WHOLE WINDOW (G-FACTOR)
(U-VALUE; W/m2K) (U-VALUE; W/m2K)
OUTER PANE INNER PANE SPACER BAR CAVITY FILL STORMSURE
UNCOATED GLASS HARD COAT LOW-E ALUMINIUM AIR 1.7 1.9 0.442
(4mm THICK) EN = 0.13 (CAVITY 16mm)
(4mm THICK)
UNCOATED GLASS SOFT COAT LOW-E ALUMINIUM AIR 1.4 1.8 0.417
(4mm THICK)
UNCOATED GLASS SOFT COAT LOW-E WARM EDGE AIR 1.4 1.6 0.417
(4mm THICK) EN = 0.04 (STANDARD) (CAVITY 16mm)
(4mm THICK)
UNCOATED GLASS SOFT COAT LOW-E WARM EDGE 90% ARGON 1.2 1.5 0.417
(4mm THICK)
*PROGRAMME FOR THE ENDORSEMENT

OF FOREST CERTIFICATION.
24
Section Details
TRADITIONAL TRUE DIVIDED LIGHT SASH SIMULATED DIVIDED LIGHT SASH
25
Ordering Windows • A narrow 93mm stub sill is available
Sovereign Stormsure softwood windows are as well as extended sills to widths of 208mm.
supplied with a standard 158mm nominal sill, Care must be taken to ensure that the
basecoat stained with brown ventilator(s) and correct sill width is specified to suit the
gold effect ironmongery. Sizes of windows brickwork detail and Approved Document ‘L’
shown are co-ordinating sizes Ref:BS 644, 2002 amendments.
see page 9. Actual sizes of frames are 5mm • Factory glazed windows are supplied with
less in height and width than shown in this 24mm clear Low E insulating glass units with
section. This is not an installation clearance. silver spacer bar. We offer a wide range of
alternative glazing units including obscure
Windows shown with * can be supplied either and leaded, this is detailed on pages 14 and 15.
hand. The drawings show the window as • Alternative white ventilators are
viewed from the outside of the building. also available.
Please state either “As catalogue” or “Opposite • Beige weathership is fitted as standard,
catalogue” when ordering. Windows will white or brown are available as an option.
be supplied “As catalogue” if not specified. Please specify at time of ordering.
Made to order
Sovereign Stormsure windows can
be manufactured to bespoke sizes
by special order. Certain manufacturing
restrictions may apply. Please contact
JELD-WEN UK for details.
26
Ironmongery
All Sovereign Stormsure Mobility/Special Needs Optional Projecting Hinges

windows are supplied fitted with Certain styles (above 1200mm high) of Optional projecting hinges can be fitted to
Sovereign Stormsure windows can be adapted opening side hung casements for ease of
ironmongery. Standard windows to comply with the mobility requirements of cleaning. An optional restrictor, (supplied fitted)
have butt hinges to all openings BS 5619, incorporating low level espagnolette is available.
with at least one lockable fastener locking and cord operated ventilators. For more
information, please contact our Estimating
to side hung casements. Top hung Department on 0870 126 0011.
windows have at least one
lockable stay.
Ironmongery Options
For extra convenience an espagnolette
multipoint locking system can be fitted,
operated by one handle.
Fire Escape: Building Regulations

The requirement of Approved Document B, 2000
edition, states that window openings must be GOLD EFFECT FITTED AS CHROME EFFECT OPTIONAL ESPAGNOLETTE LOCKING
450mm or wider. A 630mm wide single STANDARD ON SOVEREIGN IRONMONGERY, AVAILABLE (AT EXTRA COST)
casement side hung window fitted with butt STORMSURE SOFTWOOD AS AN OPTION
WINDOWS (AT EXTRA COST)
or fire escape projecting hinge will comply
providing the window is 900mm or higher to
provide a clear opening greater than 0.33m2.
Fire Escape windows are available to order in

bespoke designs in 2, 3 and 4 light options.
They are not available top hung.
All windows supplied with fire escape projecting

hinges are supplied with non-locking fasteners.
Non-locking fasteners are available on standard
windows where used in fire escape situations. WHITE IRONMONGERY, BRASS EFFECT IRONMONGERY, OPTIONAL PROJECTING HINGE
Releasable Restrictors are recommended for AVAILABLE AS AN OPTION AVAILABLE AS AN OPTION (AT EXTRA COST)
use on windows provided for fire escapes. (AT EXTRA COST, AS STANDARD
ON HARDWOOD WINDOWS)
Espagnolette Locking
Espagnolette locking offers a multipoint locking
mechanism and is available as an option on
most window types. Standard on our BS 7950
Secured by Design range.
OTHER OPTIONS
CONCEALED RESTRICTORS
FIRE ESCAPE PROJECTING HINGE
Important
We can offer projecting hinges on top hung
Regency windows should it be required, but
these must not be used for access for cleaning
the external glass. This will contravene SIMULATED DIVIDED LIGHT TRADITIONAL DIVIDED LIGHT
the requirements of BS 8213:part 1:2004
appendix D and could cause serious injury.
Particular care is needed with compliance
with Scottish Building Regulations part P2.3
where applicable.
27
Acoustic Performance
PRODUCT IDENTIFICATION: PRODUCT IDENTIFICATION:

Sound attenuation through W112C STORMSURE (4F-16-4F) TITON TRICKLE VENT OPEN W112C STORMSURE (4F-16-4F) TITON TRICKLE VENT CLOSED
Sovereign Stormsure windows
Increased awareness of external noise nuisance FREQ F HZ SOUND REDUCTION INDEX, dB FREQ F HZ SOUND REDUCTION INDEX, dB
has increased the requirement for windows
with good acoustic performance to be specified. 1/3 OCT 1/1 OCT 1/3 OCT 1/1 OCT
Planning consents given on sites in inner cities
100 19.3 100 21.6
or near to railways, major roads or airports now
125 18.5 18.8 125 20.2 20.8
require high levels of acoustic performance.
600 18.5 160 20.6
Often these can be easily met, and even omitting
the trickle ventilator in the window head will 200 14.1 200 14.7
substantially improve acoustic performance. 250 21.0 17.7 250 23.0 18.7
315 24.2 315 28.4
Higher acoustic performance can be achieved
by use of special glazing, or by triple acoustic 400 24.8 400 28.2
glazing. JELD-WEN UK has experience in meeting 500 24.6 24.4 500 28.0 27.7
such requirements. For more information contact 630 23.8 630 27.0
our Technical Helpdesk on 01302 394541 or 800 21.3 800 24.1
[email protected] 1000 20.1 20.8 1000 24.7 25.3
1250 20.9 1250 27.7
1600 19.4 1600 29.4
2000 21.1 20.5 2000 33.4 30.2
2500 21.2 2500 29.0
3150 20.2 3150 30.5
4000 21.8 21.4 4000 32.4 31.9
5000 22.6 5000 33.5
RATING ACCORDING TO BS EN ISO 717-1:1997 RATING ACCORDING TO BS EN ISO 717-1:1997
RW(C;CTR) = 21 (0;0) DB RW(C;CTR) = 28 (-1;-3) DB
PRODUCT IDENTIFICATION: PRODUCT IDENTIFICATION: PRODUCT IDENTIFICATION:

W112C STORMSURE (4F-16-4F) TITON TRICKLE VENT BLANKED OFF W112C STORMSURE (4F-16-4F) GLIDEVALE TRICKLE VENT OPEN W112C STORMSURE (4F-16-4F) GLIDEVALE TRICKLE VENT CLOSED
FREQ F HZ SOUND REDUCTION INDEX, dB FREQ F HZ SOUND REDUCTION INDEX, dB FREQ F HZ SOUND REDUCTION INDEX, dB
1/3 OCT 1/1 OCT 1/3 OCT 1/1 OCT 1/3 OCT 1/1 OCT
100 22.6 100 17.9 100 20.1

125 21.9 22.2 125 18.0 18.0 125 19.1 19.9
160 22.1 160 18.2 160 20.6
200 14.9 200 14.2 200 14.1
250 24.0 19.0 250 21.8 17.9 250 23.0 18.1
315 31.1 315 24.1 315 27.2
400 32.2 400 24.4 400 26.9
500 33.4 33.3 500 25.0 25.0 500 27.1 27.0
630 34.6 630 25.6 630 26.9
800 34.5 800 21.7 800 22.4
1000 34.5 35.7 1000 19.0 18.8 1000 20.7 21.8
1250 37.7 1250 16.9 1250 22.4
1600 39.4 1600 17.9 1600 23.9
2000 41.2 39.9 2000 19.9 19.1 2000 26.4 25.6
2500 39.2 2500 19.8 2500 27.1
3150 36.5 3150 19.8 3150 28.8
4000 37.9 38.0 4000 21.0 21.0 4000 30.7 30.3
5000 40.4 5000 22.7 5000 32.1
RATING ACCORDING TO BS EN ISO 717-1:1997 RATING ACCORDING TO BS EN ISO 717-1:1997 RATING ACCORDING TO BS EN ISO 717-1:1997
RW(C;CTR) = 35 (-3;-7) DB RW(C;CTR) = 20 (-1; 0) DB RW(C;CTR) = 25 (-1; -2) DB
28
W112C STORMSURE (4F-16-4F) TITON SELECT HOOD VENT OPEN W112C STORMSURE (4F-16-6F) VENTS BLANKED OFF
FREQ F HZ SOUND REDUCTION INDEX, dB FREQ F HZ SOUND REDUCTION INDEX, dB
1/3 OCT 1/1 OCT 1/3 OCT 1/1 OCT
100 17.5 100 22.1

125 17.9 17.7 125 22.3 23.0
160 17.8 160 25.2
200 13.5 200 22.4
250 21.0 17.2 250 28.1 25.8
315 23.4 315 32.3
400 24.1 400 32.8
500 23.8 24.4 500 34.1 33.8
630 25.6 630 34.8
800 23.1 800 33.6
1000 20.8 20.5 1000 33.7 33.6
1250 18.7 1250 33.4
1600 19.2 1600 34.0
2000 19.9 19.7 2000 38.0 36.4
2500 20.1 2500 38.8
3150 19.5 3150 39.3
4000 20.6 20.4 4000 39.4 39.3
5000 21.2 5000 39.3
RW(C;CTR) = 21 (-1; -1) DB RW(C;CTR) = 35 (-1; -3) DB

W112C STORMSURE (4F-16-6.4L) VENTS BLANKED OFF W112C STORMSURE (6F-10-10F) VENTS BLANKED OFF
1/3 OCT 1/1 OCT 1/3 OCT 1/1 OCT
100 23.1 100 25.0

125 22.2 23.3 125 25.6 25.4
160 25.0 160 25.7
200 22.4 200 26.8
250 28.6 26.0 250 28.2 28.6
315 33.1 315 32.9
400 33.8 400 35.1
500 35.3 35.1 500 36.6 36.0
630 36.5 630 36.5
800 35.4 800 35.1
1000 35.8 36.4 1000 36.0 36.0
1250 38.6 1250 37.0
1600 39.8 1600 38.1
2000 40.5 40.0 2000 39.2 39.1
2500 39.9 2500 40.5
3150 40.7 3150 43.0
4000 41.2 41.6 4000 42.4 43.3
5000 43.5 5000 45.0
RW(C;CTR) = 37 (-1; -4) DB RW(C;CTR) = 37 (-1; -3) DB
29
Rapid Ventilation Area and Daylight Figures
SOFTWOOD HARDWOOD TOTAL TOTAL SOFTWOOD HARDWOOD TOTAL TOTAL SOFTWOOD HARDWOOD TOTAL TOTAL
CODE CODE VENTILATION LIGHT CODE CODE VENTILATION LIGHT CODE CODE VENTILATION LIGHT
AREA(M2) AREA(M2) AREA(M2) AREA(M2) AREA(M2) AREA(M2)
W107C W107CH 0.22 0.22 W107V W107VH 0.06 0.22 W109T W109TH 0.28 0.28
W207C W207CH 0.22 0.53 W115V W115VH 0.06 0.61 W210TX W210TXH 0.35 0.82
W209C W209CH 0.28 0.67 W209T W209TH 0.22 0.61 W212TX W212TXH 0.41 0.96
W213C W213CH 0.48 1.10 W213T W213TH 0.42 1.04 W310TXT W310TXTH 0.70 1.17
W207CC W207CCH 0.45 0.45 W215T W215TH 0.48 1.18 W312TXT W312TXTH 0.83 1.38
W209CC W209CCH 0.57 0.57 W207CV W207CVH 0.29 0.45 W313TXT W313TXTH 0.96 1.58
W210CC W210CCH 0.70 0.70 W209CV W209CVH 0.35 0.59 W315TXT W315TXTH 1.09 1.78
W212CC W212CCH 0.83 0.83 W210CV W210CVH 0.42 0.73 W310T W310TH 0.35 1.35
W309CC W309CCH 0.57 0.96 W309CVC W309CVCH 0.64 0.88 W315T W315TH 0.55 2.02
W310CC W310CCH 0.70 1.17 W310CVC W310CVCH 0.79 1.10 W410TT W410TTH 0.70 1.69
W310CC W310CH 0.35 1.34 W412CVVC W412CVVCH 0.96 1.75 W415TT W415TTH 1.10 2.57
W312C W312CH 0.42 1.56 WN07V WN07VH 0.04 0.16 WN07C WN07CH 0.15 0.15
W313C W313CH 0.48 1.79 WN09V WN09VH 0.04 0.21 WN09C WN09CH 0.19 0.19
W410CMC W410CMCH 0.70 1.64 WN10V WN10VH 0.04 0.27 WN10C WN10CH 0.23 0.23
W412CMC W412CMCH 0.83 1.92 WN12V WN12VH 0.04 0.32 WN12C WN12CH 0.27 0.27
W413CMC W413CMCH 0.96 2.20 W2N09CV W2N09CVH 0.23 0.40 WN13C WN13CH 0.32 0.32
W2N09W W2N09WH 0.11 0.48 W2N10CV W2N10CVH 0.28 0.50 W2N07C W2NO7CH 0.15 0.15
W2N10W W2N10WH 0.11 0.60 W2N12CV W2N12CVH 0.32 0.60 W2N09C W2N09CH 0.19 0.47
W2N12W W2N12WH 0.11 0.71 W2N10C W2N10CH 0.23 0.57
W2N13W W2N13WH 0.11 0.83 W2N12C W2N12CH 0.67 0.27
W2N15W W2N15WH 0.11 0.95 W2N13C W2N13CH 0.32 0.77
W209W W209WH 0.15 0.65 W2N07CC W2N07CCH 0.30 0.30
W210W W210WH 0.15 0.81 W2N09CC W2N09CCH 0.38 0.38
W212W W212WH 0.15 0.98 W2N10CC W2N10CCH 0.47 0.47
W213W W213WH 0.15 1.14 W2N12CC W2N12CCH 0.55 0.55
W215W W215WH 0.15 1.30 W2N13CC W2N13CCH 0.64 0.64
W310CW W310CWH 0.51 1.17 W3N07CC W3N07CCH 0.30 0.52
W312CW W312CWH 0.57 1.40 W3N09CC W3N09CCH 0.38 0.66
W313CW W313CWH 0.64 1.62 WN310CC WN310CCH 0.47 0.81
W310WW W310WWH 1.23 0.22 W3N12CC W3N12CCH 0.55 0.95
W312WW W312WWH 0.22 1.48 W3N13CC W3N13CCH 0.64 1.09
W313WW W313WWH 0.22 1.73 W4N10CMC W4N10CMCH 0.47 1.14
W410CWC W410CWCH 0.86 1.52 W4N13CMC W4N13CMCH 0.64 1.54
W412CWC W412CWCH 0.99 1.81
W413CWC W413CWCH 1.12 2.11
30
WC109C - 0.51 1.31 WH107C WH107CH 0.22 0.57 WH109D WH109DH 0.24 0.58
WC209C - 1.01 2.54 WH113C WH113CH 0.43 1.06 WH209CD WH209CDH 0.54 1.35
WC209CC - 1.01 2.54 WH212C WH212CH 0.82 2.05 WH309CDC WH309CDCH 0.81 2.02
WC210CC - 1.04 2.69 WH213C WH213CH 0.95 2.36 WH310CDC WH310CDCH 0.91 2.29
WC212CC - 1.07 2.73 WH210CC WH210CCH 0.63 1.58 WH312CDC WH312CDCH 1.06 2.64
WC213CC - 1.10 2.77 WH212CC WH212CCH 0.72 1.81 WH313CDC WH313CDCH 1.24 3.11
WC309CC - 1.52 3.81 WH213CC WH213CCH 0.85 2.13 WH410CDDC WH412CDDCH 1.39 3.47
WC310CC - 1.61 4.03 WH309CC WH309CCH 0.87 2.17 WH413CDDC WH413CDDCH 1.64 4.09
WC312CC - 1.64 4.07 WH310CC WH310CCH 1.02 2.56 WHN09D - 2.69 6.73
WC313CC - 1.67 4.10 WH312CC WH312CCH 1.18 2.95 WHN10D - 2.69 6.73
WC410CMC - 2.15 5.38 WH313CC WH313CCH 1.37 3.42 WHN12D - 2.69 6.73
WC412CMC - 2.19 5.41 WH410CMC WH410CMCH 1.41 3.54 WH2N10D - 4.57 1.14
WC413CMC - 2.23 5.44 WH412CMC WH412CMCH 1.63 4.09 WH2N12D - 5.23 1.31
WC109D - 0.24 1.27 WH413CMC WH413CMCH 1.89 4.73 WH2N13D - 6.25 1.56
WC110D - 0.27 1.34 WHN09C WHN09CH 2.69 6.71
WC112D - 0.30 1.39 WHN10C WHN10CH 2.69 6.72
WC113D - 0.34 1.43 WHN12C WHN12CH 2.69 6.72
WC2N12D - 0.54 1.18 WHN13C WHN13CH 2.84 7.10
WC2N13D - 0.57 1.23 WH2N09C WH2N09CH 5.38 1.34
WC209CD - 1.01 2.54 WH2N10C WH2N10CH 5.68 1.42
WC210CD - 1.07 2.69 WH2N12C WH2N12CH 6.31 1.58
WC212CD - 1.10 2.73 WH2N13C WH2N13CH 6.77 1.69
WC213CD - 1.13 2.76 WH2N09CC WH2N09CCH 5.38 1.35
WC309CDC - 1.52 3.81 WH2N10CC WH2N10CCH 5.38 1.35
WC410CDDC - 2.15 5.38 WH3N10CC WH3N10CCH 8.37 2.09
WH4N10CMC WH4N10CMCH 1.14 2.84
31
Rapid Ventilation Area and Daylight Figures
W110DG W110DGH - 0.41 WB107C - 0.48 0.48 WB110T - 0.54 0.54

W112DG W112DGH - 0.48 WB109C - 0.51 0.51 WB112T - 0.57 0.57
W113DG W113DGH - 0.56 WB110C - 0.54 0.54 WB113T - 0.60 0.60
W204DG W204DGH - 0.22 WB112C - 0.57 0.57 WB107V - 0.23 0.48
W206DG W206DGH - 0.37 WB113C - 0.60 0.60 WB109V - 0.27 0.51
W207DG W207DGH - 0.52 WB207C - 0.48 0.96 WB110V - 0.24 0.54
W209DG W209DGH - 0.67 WB209C - 0.51 1.02 WB112V - 0.24 0.57
W210DG W210DGH - 0.82 WB210C - 0.54 1.08 WB113V - 0.24 0.60
W212DG W212DGH - 0.97 WB212C - 0.57 1.14 WB207CV - 0.72 0.96
W213DG W213DGH - 1.12 WB309CC - 0.96 1.46 WB209CV - 0.75 1.02
W104A W014AH 0.09 0.09 WB310CC - 1.02 1.55 WB210CV - 0.78 1.08
W106A W106AH 0.16 0.16 WB312CC - 1.08 1.64 WB212CV - 0.81 1.14
W107A W107AH 0.22 0.22 WB313CC - 1.14 1.74 WB213CV - 0.84 1.20
W109A W109AH 0.28 0.28 WB213TX - 1.20 1.79 WB309CVC - 1.20 1.46
W110A W110AH 0.35 0.35 WB215TX - 1.26 1.85 WB310CVC - 1.26 1.55
W112A W112AH 0.41 0.41 WB313TXT - 1.14 1.73 WB312CVC - 1.36 1.64
W2N04A W2N04AH 0.16 0.16 WB315TXT - 1.26 1.85 WB313CVC - 1.38 1.74
W2N06A W2N06AH 0.26 0.26 WB415TXXT - 1.85 2.45 WB410CVVC - 1.49 2.09
W2N07A W2N07AH 0.37 0.37 WB412CVVC - 1.55 2.21
W2N09A W2N09AH 0.48 0.48 WB413CVVC - 1.64 2.33
SOFTWOOD HARDWOOD TOTAL TOTAL
W2N10A W2N10AH 0.58 0.58 WBN07C - 3.56 3.56
CODE CODE VENTILATION LIGHT
W2N12A W2N12AH 0.69 0.69 AREA(M2) AREA(M2) WBN09C - 4.29 4.29
W204A W204AH 0.22 0.22 WBN10C - 5.02 5.02
W206A W206AH 0.37 0.37 WCSB312CV - 1.31 1.64 WBN12C - 5.76 5.76
W207A W207AH 0.52 0.52 WCSB313CV - 1.37 1.73 WBN09V - 1.99 4.29
W209A W209AH 0.67 0.67 WCSB413T - 1.61 2.33 WBN10V - 1.99 5.02
W210A W210AH 0.82 0.82 WCSB415T - 1.69 2.42 WBN12V - 1.99 5.76
W212A W212AH 0.97 0.97 WCSB312T - 1.27 1.64 WB2N10CV - 7.01 8.58
W2N13AS W2N12ASH 0.58 0.74 WCSB313T - 1.35 1.73 WB2N12CV - 7.75 1.00
W213AS W213ASH 0.82 1.08 WCSB315T - 1.41 1.80 WB2N10W - 2.19 8.58
W215AS W215ASH 1.06 1.32 WCSB412CV - 1.55 2.21 WB2N12W - 2.19 1.00
W304AE W304AEH 0.16 0.40 WCSB413CV - 1.61 2.33
W306AE W306AEH 0.26 0.63 WCDB412CV - 1.55 2.21
W307AE W307AEH 0.37 0.86 WCDB413CV - 1.61 2.33
W309AE W309AEH 0.48 1.08 WCDB415T - 1.69 2.42
W310AE W310AEH 0.58 1.16 WCSB512CV - 1.55 2.77
W312AE W312AEH 0.69 1.54 WCSB513CV - 1.61 2.92
WCSB513T - 1.15 2.92
WCSB515T - 1.61 2.99
32
Window Designs
Sovereign Stormsure windows are manufactured in a range of standard co-ordinated brickwork module windows size (see page 9). They can also be
manufactured to bespoke sizes by special order. Please contact JELD-WEN UK for details.
Plain Casement
mm 630mm 1200mm 1200mm 1770mm 2339mm
* *
Casement – Narrow Module

mm 488mm 915mm 915mm 1342mm 1770mm
* *
Casement – With Casement Vents

mm 630mm 1200mm 1200mm 1770mm 2339mm
* * *
Casement – Narrow Module with Casement Vents Direct Glazed

mm 488mm 915mm mm 630mm 1200mm
Casement – Fire Escape

mm 915mm
WINDOWS SHOWN WITH * CAN BE SUPPLIED EITHER HAND.
33
Window Designs
Casement – Transom Casement – With Casement Vents

mm 630mm 1200mm 1770mm 1770mm 2339mm
* * *
Casement – Landscape
mm 915mm 1200mm 1770mm 1770mm 1770mm 2339mm
* *
Cottage
mm 630mm 1200mm 1200mm 1770mm 2339mm
* *
Cottage – Divided Casement

mm 630mm 915mm 1200mm 1770mm 2339mm
Horizontal Bar
mm 630mm 1200mm 1200mm 1770mm 2339mm
* *
34
Horizontal Bar – Narrow Module
mm 488mm 915mm 915mm 1342mm 1770mm
* *
Horizontal Bar – Divided Casement and Horizontal Bar – Divided Casement Narrow Module
mm 488mm 630mm 915mm 1200mm 1770mm 2339mm
Top Hung
mm 630mm 915mm 1200mm 1770mm
Top Hung with Sublight

630mm 915mm 1200mm
All Bar – With Casement Vents†

mm 630mm 630mm 1200mm 1770mm 2339mm
* *
* *

† GLAZING BAR HEIGHT MAY VARY DEPENDING ON DESIGN AND HEIGHT OF FRAME.
35
Window Designs
All Bar – With Casement Vents – Narrow Module†

mm 488mm 488mm 915mm 915mm
* *
* *
All Bar and All Bar – Transom†

mm 630mm 1200mm 1200mm 1770mm 1770mm 2339mm
* *
* *
* * *
Regency – Non Bar

mm 488mm 630mm 915mm 1200mm 1200mm 1770mm
Regency – Vertical Bar

mm 488mm 630mm 915mm 1200mm 1770mm 2339mm

† GLAZING BAR HEIGHT MAY VARY DEPENDING ON DESIGN AND HEIGHT OR FRAME.
36
Regency – All Bar†
mm 488mm 630mm 915mm 1200mm 1200mm 1770mm
Circular Windows Arched Head Windows

SIZE 600mm DIAMETER 600mm DIAMETER HEIGHT AND WIDTH 1800mm X 915mm 1800mm X 915mm 1800mm X 915mm
W120BE W120BP SOFTWOOD W918B1 W918A W918B
Semi-Circular Windows
HEIGHT AND WIDTH 345mm X 630mm 488mm X 915mm 630mm X 1200mm 345mm X 630mm 488mm X 915mm 630mm X 1200mm
SOFTWOOD W638C W952D W1267E W638CRB W952DRB W1267ERB
Feature Windows – Examples

mm 630mm 915mm 915mm 1200mm 1200mm 1770mm

† GLAZING BAR HEIGHT MAY VARY DEPENDING ON DESIGN AND HEIGHT OR FRAME.
37
Window Designs
Combined Feature Windows and Door Frames – Examples

mm 1530mm 2100mm 2100mm 2100mm 2100mm
* * * * *
Imperial Side Hung
SOFTWOOD OPENING IN HEIGHT 641mm (2’11/4”) 641mm (2’11/4”)
* *
* *
Imperial Vent and Direct Glazed Windows

SOFTWOOD 438mm (1’51/4”) 641mm (2’11/4”) 921mm (3’01/4”) 1226mm (4’01/4”) 1530mm (5’01/4”) 1810mm (5’111/4”)
Imperial Side Hung Windows

* * * * * *
Imperial Side Hung Windows


† FOR WINDOWS ABOVE 1350mm HIGH, LOW LEVEL GLAZING UNITS ARE SUPPLIED AS TEMPERED SAFETY GLASS TO SATISFY BS 6262: PART 4: 1994.
38
Fully Glazed Sliding Sash
A unique range of timber windows incorporating PVC–U Jambs Ventilation System

stepped sashes for improved performance whilst All windows have special PVC-U jambs faced Background ventilation is provided to comply
retaining traditional sight lines. Supplied fully with timber. The PVC-U jambs are supplied with the Requirement F1 of the Building
glazed with 24mm Low E insulating glass units. white on primed windows and brown on stained Regulations and Regulation 23 of the Building
Ventilation is via concealed ventilator(s) through windows. These jambs have the advantage Standards (Scotland) Regulations. Face fixed
the head section. All windows have extended of stepped sashes for improved weather Titon Trimvent® select ventilators are available
horns on the top sash and flush to frame sills performance. PVC-U jambs are an integral part in white or brown. 8000mm2 free area is
as standard. of the frame and cannot be removed separately. supplied fitted on windows 860mm and
wider, 4000mm2 on windows below that
Accreditation Sills size. Windows below 488mm wide are not
Our sliding sash range is fully endorsed by the Standard flush 168 x 56mm or an alternative fitted with ventilators.
BWF under its Timber Window Accreditation projecting sill option of 196 x 56mm is also
Scheme. Under the scheme all aspects from available (price on application).
specification to manufacture are assessed and VENTILATION PERFORMANCE FIGURES
approved prior to accreditation. Section Sizes: FREE AREA 4000mm2 8000mm2
• Frame Head 54mm x 170mm
Timber • Frame Jambs 65mm x 170mm EQUIVALENT AREA 2296mm2 4592mm2
European Redwood PEFC Certified. • Sash Rails
- Top Sash Rail 52mm
Preservation - Meeting Rail 44mm Individual Window Range
- Bottom Rail 79mm Performance
Every timber window manufactured by
JELD-WEN UK is either manufactured from When tested in accordance with BS6375: Part 1:
timber not requiring preservation or protected Glazing 2004 Performance of windows and doors.
by an advanced timber preservation system. Glazing Rebates: All windows have rebates of 18 Classification for weather tightness and guidance
x 42mm and are fully glazed with a drained and on selection and specification Sovereign
Fire Escape vented glazing system. All Sliding Sash windows Stormsure Windows achieve an exposure rating
are supplied factory double glazed with Low E of 2000 pa. Vertical sliding Sash windows also
The minimum size for fire egress frames meet the requirements of BS6375: Part 2: 1987
is 860 x 1350mm. annealed or toughened glass, plain or obscure,
in compliance with Approved Document ‘L’ 2002. Operation and Strength Performance.
Finishing
All windows are supplied primed as standard
or basecoat stained as an option. Part or fully
finished options are also available. Large windows
may be supplied with sashes sent separately for
ease of frame fixing, handling and to reduce risk
of damage. Factory Finishing recommended.
U-value Declaration

OUTER PANE INNER PANE SPACER BAR CAVITY FILL VERTICAL SLIDER
(4mm THICK)
(4mm THICK)
(4mm THICK)
(4mm THICK)
39
Section Details
40
Acoustic Performance and Rapid Ventilation Areas

VS1010 TIMBER VERTICAL SLIDING SASH WINDOW WITH 2X TITON VS1010 TIMBER VERTICAL SLIDING SASH WINDOW WITH 2X TITON
SELECT S 16 4000 TRICKLE VENTS BOTH CLOSED SELECT S 16 4000 TRICKLE VENTS BOTH OPEN
1/3 OCT 1/1 OCT 1/3 OCT 1/1 OCT
100 20.7 100 19.4

125 16.9 18.3 125 16.0 17.3
160 18.1 160 17.2
200 18.0 200 17.6
250 21.9 20.4 250 21.1 19.8
315 23.0 315 22.4
400 21.8 400 21.7
500 20.0 18.3 500 20.6 19.1
630 15.5 630 16.7
800 16.5 800 12.6
1000 20.3 18.6 1000 13.6 14.1
1250 20.2 1250 17.3
1600 20.8 1600 16.4
2000 24.4 23.3 2000 19.2 18.7
2500 27.3 2500 22.9
3150 27.9 3150 24.0
4000 28.8 28.8 4000 26.6 25.3
5000 29.8 5000 25.9
RW(C;CTR) = 21 (0;-2) DB RW(C;CTR) = 18 (-1;-2) DB
Rapid Ventilation Areas
HEIGHT 410 635 860 1085 1725 1670 1670 OP 1895 1895 OP
1050 BAR 0.07 0.13 0.19 0.24 0.37 0.19 0.33 0.24 0.39
1050 0.11 0.20 0.30 0.39 0.59 0.30 0.52 0.39 0.61
1350 0.15 0.28 0.40 0.53 0.81 0.40 0.71 0.53 0.84
1650 BAR 0.15 0.28 0.40 0.53 0.81 0.40 0.71 0.53 0.84
1650 0.19 0.35 0.51 0.67 1.03 0.51 0.90 0.67 1.06
NOTES
1050 BAR REPRESENTS 1050 MODULE HEIGHT BAR TYPE WITH 1/3, 2/3 SPLIT
1650 BAR REPRESENTS 1650 MODULE HEIGHT BAR TYPE WITH 2/5, 3/5 SPLIT
1670 OP REPRESENTS "VENETIAN" STYLE FRAME 1670 MODULE WIDTH BUT WITH SIDE PANELS OPENING
1895 OP REPRESENTS "VENETIAN" STYLE FRAME 1895 MODULE WIDTH BUT WITH SIDE PANELS OPENING
EXAMPLE
VS1010MB, WIDTH 1085mm, HEIGHT 1050mm, VENTILATION AREA 0.39m2
VS1010B, WIDTH 1085mm, HEIGHT 1050mm (BAR), VENTILATION AREA 0.24m2
VS1613, FIXED SIDE PANELS, HEIGHT 1350mm, WIDTH 1670mm, VENTILATION AREA 0.4m2
VS1613, OPENING SIDE PANELS, HEIGHT 1350mm, WIDTH 1670mm (OPENING), VENTILATION AREA 0.71m2
41
Window Designs
Non Bar
mm 410mm 635mm 860mm 1085mm 1670mm 1715mm 1895mm
The windows above are available in the following heights: 1050mm, 1350mm and 1650mm.
Vertical Bar (Simulated Divided Lights)

mm 635mm 860mm 1085mm 1715mm
All Bar (Simulated Divided Lights)

The windows above are available in the following heights: 1050mm.
Available to order in bespoke sizes call JELD-WEN UK to discuss your requirements.
42
Marginal Bar (Simulated Divided Lights)
mm 860mm 1085mm 1670mm 1715mm 1895mm
Marginal Bar (Traditional Beaded)

mm 860mm 1085mm 1670mm 1715mm 1895mm
Vertical Bar (Traditional Beaded)

mm 635mm 860mm 1085mm 1715mm
Semi-Circular Feature Windows

mm 635mm 860mm 1085mm
Traditionally Beaded
mm 635mm 860mm 1085mm
43
All Clear Timber Hi-Profile Combi
The JELD-WEN UK All Clear Hi-Profile Combi Bespoke sizes including:

range of windows is an advanced window • Standard joinery size range.
system providing a complete suite of • Brick co-ordinated sizes.
operational options, with a consistent look • Architectural opportunities.
and sightlines.
In addition the following options
These options offer set modes are available:
of operation: TOP HUNG REVERSIBLE SIDE HUNG REVERSIBLE
• Fully finished Hi-build Paint system.
• Top hung reversible. • Hardwood material.
• Side hung reversible. • Espagnolette locking and shoot
• Top and side* hung (with projecting bolts to BS 7950 Enhanced Security
hinges fitted for extra convenience). requirements.
• Sill options.
All feature the following benefits
as standard: Square Bays and 45° Splay Bays
• Common appearance to all hinge options. Square Bays can be factory assembled to special TOP HUNG PROJECTING SIDE HUNG PROJECTING
• Internally beaded throughout. order using any Hi-Profile window. Return ends
• High Performance to BS 6375 Part 1. are generally 600mm wide. Fire Escape
• Fully Sashed – constant sight lines.
• Engineered knot-free timber for strength, Minimum window size for fire egress,
Individual Window Range see page 47.
stability and reliability. Performance
• PEFC certified.
• Cockspur handles and keeps. When tested in accordance with BS6375:
• Basecoat stain or primed to order. Part 1: 1989 Performance of windows and
• Factory glazing with Low E glazing for full doors. Classification for weather tightness VENTILATION PERFORMANCE FIGURES
compliance with Approved Document L and guidance on selection and specification
Hi-Profile Combi achieve an exposure rating FREE AREA 4000mm2 8000mm2
amendments 2002.
• 83x68mm flush sill. of 2500 pa Special.
EQUIVALENT AREA 2167mm2 4334mm2
• 24mm Low E insulating glass units for
optimum thermal performance with Hi-Profile Combi windows also meet the
a 16mm wide sealed cavity when glazed requirements of BS6375: Part 2: 1987
with 4-16-4 units. Operation and Strength Performance.
U-value Declaration

OUTER PANE INNER PANE SPACER BAR CAVITY FILL HI PROFILE COMBI
(4mm THICK)
(4mm THICK)
(4mm THICK)
(4mm THICK)
PRICES SHOWN DO NOT INCLUDE VAT.
44
Section Details
45
Acoustic Performance and Window Designs
PRODUCT IDENTIFICATION: PRODUCT IDENTIFICATION: PRODUCT IDENTIFICATION:

2 X HI-PROFILE COMBI WINDOWS WITH 1X TITON SELECT R 16 2 X HI-PROFILE COMBI WINDOWS WITH 1X TITON SELECT R 16 2 X HI-PROFILE COMBI WINDOWS
4000 TRICKLE VENTILATOR IN EACH, BOTH CLOSED 4000 TRICKLE VENTILATOR IN EACH, BOTH OPEN
FREQ F HZ SOUND REDUCTION INDEX, dB FREQ F HZ SOUND REDUCTION INDEX, dB FREQ F HZ SOUND REDUCTION INDEX, dB
1/3 OCT 1/1 OCT 1/3 OCT 1/1 OCT 1/3 OCT 1/1 OCT
100 19.7 100 18.5 100 20.4

125 21.6 20.0 125 20.2 18.5 125 22.5 20.0
160 19.0 160 17.4 160 18.3
200 18.3 200 17.6 200 18.4
250 17.7 19.3 250 17.3 18.7 250 17.0 19.1
315 24.6 315 23.3 315 26.4
400 28.7 400 26.1 400 30.1
500 26.6 26.6 500 24.1 24.5 500 30.2 30.4
630 25.2 630 23.8 630 30.9
800 23.0 800 21.9 800 32.6
1000 24.6 24.6 1000 19.3 19.8 1000 30.4 30.4
1250 26.9 1250 18.7 1250 28.9
1600 28.1 1600 20.2 1600 29.3
2000 27.6 27.9 2000 20.4 20.1 2000 31.5 31.4
2500 28.0 2500 19.7 2500 35.3
3150 31.1 3150 21.6 3150 35.4
4000 31.1 31.9 4000 22.5 22.8 4000 33.7 34.9
5000 34.1 5000 24.9 5000 35.9
RATING ACCORDING TO BS EN ISO 717-1:1997 RATING ACCORDING TO BS EN ISO 717-1:1997 RATING ACCORDING TO BS EN ISO 717-1:1997
RW(C;CTR) = 27 (-1;-3) DB RW(C;CTR) = 21 (-1;-1) DB RW(C;CTR) = 31 (-2;-4) DB
Side Hung Projecting

Hi-Profile Combi windows are available in a wide
mm 630mm 1200mm 1770mm
range of bespoke sizes and designs. Attractive
glazing designs using simulated divided lights
are available to complement the range. Please
* * call JELD-WEN UK to discuss your requirements.
Top Hung Reversible

mm 630mm 1200mm 1770mm
* *
Examples of some of the designs available.
46
Product Limitations by Range
SOVERIEGN STORMSURE PRODUCT LIMITATIONS

ONE LIGHT FRAME SIZES
HINGE TYPE MIN. WIDTH X MIN. HEIGHT MAX. WIDTH X MAX. HEIGHT
SIDE HUNG BUTT 450mm X 450mm 731mm X 1350mm BASED ON MAXIMUM WIDTH
450mm X 450mm 630mm X 1500mm BASED ON MAXIMUM HEIGHT
SIDE HUNG BUTT FIRE EGRESS 630mm X 900mm
TOP HUNG BUTT 450mm X 355mm 1231mm X 1200mm
SIDE HUNG PROJECTING 479mm X 592mm 698mm X 1350mm
TOP HUNG PROJECTING 455mm X 380mm 1231mm X 1200mm
SIDE HUNG EGRESS PROJECTING 567mm X 590mm 630mm X 1500mm
VERTICAL SLIDING SASH PRODUCT LIMITATIONS

N/A 405mm X 750mm FIXED SASHES 1200mm X 2100mm

FIRE EGRESS 860mm X 1350mm N/A
HI-PROFILE COMBI PRODUCT LIMITATIONS

SIDE HUNG BUTT 390mm X 615mm 990mm X 1604mm

SIDE HUNG BUTT FIRE EGRESS 590mm X 854mm N/A
SIDE HUNG PROJECTING 390mm X 425mm 910mm X 1704mm
TOP HUNG PROJECTING 390mm X 425mm 1490mm X 1424mm
SIDE HUNG SWING 590mm X 715mm 1137mm X 1604mm
TOP HUNG SWING 390mm X 585mm 1459mm X 1474mm
TOP HUNG SWING FIRE EGRESS 690mm X 1000mm N/A
THE ABOVE FIGURES ARE REPRESENTATIVE FOR SINGLE LIGHT WINDOW DESIGNS. THEY DO NOT REPRESENT THE FULL RANGE
OF DESIGNS MANUFACTURED BY JELD-WEN UK. PLEASE CONTACT US TO DISCUSS YOUR FULL SCHEME DESIGN REQUIREMENTS.
47
Roof Windows
Roof Windows Fire Escape • Tight rubber gaskets to ensure a perfect seal.
The Energy600 range is a high spec, best value Where there is requirement for a fire escape • Removable foam gasket allows installation
product that will appeal to the builder and window, we recommend the use of the into roofing materials from to 120mm depth.
end-user alike. RL814FE window, which complements the • Pleated lead apron follows contours
standard Energy600 range perfectly and fulfils of all roof coverings.
Features and benefits of the SKYVIEW
all relevant Building Regulation requirements.
Energy600 Roof Window range: Flashing Kits
• Can be fully installed from within the roof Must be fitted with each roof window available
Additional features and benefits of the
with pitches of 15-90 degrees. for slate (or thin tile) roofs to a depth of 16mm
SKYVIEW means of escape window:
• 10 Year Guarantee (including ironmongery or tiled roofs to a depth of 90mm.
• Complies fully with Part B 2000 of
fittings).
Building Regulations.
• Part L 2002 Compliant. Low Energy Insulating Blackout Blinds
• Gas-filled spring facilitates easy opening
Glass. Pane U-Value = 1.1 W/m2k. Overall
of window. Available to complement SKYVIEW windows
frame value = 1.7 W/m2k.
is a range of blackout blinds.
• Easy fixing process, with full instructions.
Skylights
• White coated zinc handles (lockable).
The FENSTRO is a great new low-cost skylight, Features and Benefits:
• Adjustable ventilation, complying fully to
designed for non-living spaces (i.e. garages, • Easy-to-install. Installation instructions
Building Regulation and NHBC guidelines
storage areas) where natural lighting is required included.
(4000mm2 free area on windows below 900mm
on a budget. • Dark Blue or Beige.
W, 8000mm2 free area over 900mm W).
• Two aluminium guides ensure easy
• Local Authority Building Control National
The FENSTRO Skylight is a best value- and precise positioning of blind to
Type Approval.
for-money product, with the following regulate light intake.
features and benefits: • Special thermal film coating (as standard)
• Clean slimline profiles with a great to reduce heat gain/heat loss.
aesthetic look. • Blind fabric manufactured from 100%
• An integral flashing. cotton for easy cleaning.
• Bi-directional sash – can be installed
as top hung or side hung.
• Double glazed pane (3-8-3).
FIRE ESCAPE
ENERGY 600
DIMENSIONS 550 X 780 550 X 980 780 X 980 780 X 1180 780 X 1400 1140 X 1180
FENSTRO
DIMENSIONS 450 X 550
48
Door Frames and Doorsets
Door Frames
Imperial or Metric, single entrance, French
casement, garage or fire door – JELD-WEN UK
have a frame to suit. Available with factory
finish paint or stain, factory glazed sidelights
all as options.
For full details please refer to our website

www.jeld-wen.co.uk
The Clifton Single and Double

Softwood Doorset
Chain of Custody Certified softwood single
and double doorsets. 54mm thick door leaf.
Available from 856mm width up to 3000mm.
For full details please refer to our website

www.jeld-wen.co.uk
The Clifton doorset is manufactured from

engineered knot free clear timber available
in 4 door styles.
• Doors and sidelights are supplied with factory

fitted 24mm clear Low E insulating glass
units. Other glazing options available.
• Doors are supplied with ironmongery,
ventilator and multipoint locking.
• Door leaf is 54mm thick.
2XGG PATTERN 70 PATTERN 20
49
Doorsets
Doorsets
The Ledbury – Externally Sliding The Flockton – High Performance

Timber Patio Door with Low E Glazing Hardwood French Doorset
Canberra – Simple Elegance
The Canberra is a new concept in patio doors, Whether you have a traditional or contemporary
combining the style and elegance of a classic style home, the Canberra will fit beautifully.
French door, with the space saving benefits of a Manufactured in timber, the doors can be simply
sliding door. The sliding and folding mechanism stained or painted to your taste.
allows for full opening access to both the
internal living space and the outdoor patio or For full range details, visit www.jeld-wen.co.uk
garden area. Even when closed the full height
glazed doors bring in maximum light, so even
on cold and wintry days you’ll reap the benefits
of the Canberra.
50
Fastrack CD
If your disc is missing please

contact JELD-WEN UK
marketing on 01302 394 319
to request a replacement.
JELD-WEN UK Useful Contact Numbers

Technical: 01302 394 541
email: [email protected]
Marketing: 01302 394 319
Sales: 0870 126 0000
51
The JELD-WEN UK web site is your ultimate resource for learning
about our reliable windows. It has all the product information,
sizes and specifications you need to make the best choice.
Visit us at www.jeld-wen.co.uk today.
JELD-WEN UK Ltd
2A Snow Hill, Melton Mowbray
Leicester LE13 1PD
T: 01664 484500 F: 01664 484502
Visit us at: www.jeld-wen.co.uk
MFD33, Issue A, AUG 06

Timber Windows

Uploaded by

Copyright:

Available Formats

Timber Windows

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Timber Windows

Uploaded by

Copyright:

Available Formats

TIMBER WINDOWS

The Supply & Fit Service

This service is available for certain projects only please contact

Sovereign Stormsure Windows

Sliding Sash Windows

Hi–Profile Combi Windows

JELD-WEN UK’s success as a world-class

Our long-standing vertically integrated

JELD-WEN UK employees are committed

Chain of Custody Certification

The EcoHomes standard defines 4 tiers of

The Green Guide to Housing Specification gives

Further credits are also available under the

The introduction of the government’s Code

Protim 418V is formulated principally for the

With some of the most efficient and up-to-date

www.sbsa.gov.uk NORTHERN IRELAND TECHNICAL BOOKLET E NORTHERN IRELAND TECHNICAL BOOKLET E

Guidance on the Building Regulations for

AD = Approved Document SCOTLAND SECTION 4 SCOTLAND SECTION 4

Other regulatory b) in some circumstances, if the smaller

a) for glazing wholly, or partly, within 300mm .

Local SBD requirements may differ so

it will be necessary to have toughened

It is the customer’s responsibility to request

Coordinated brickwork module window sizes

METRIC MODULAR BS644

STUCTURAL OPENING 300 600 900 1200 1800 2400

STUCTURAL OPENING 572.5 1135 1697.5 2260

3 BRICK MODULE STANDARD BRICK 215 X 102.5 X 65,

1 LIGHT 2 LIGHT 3 LIGHT 4 LIGHT

STUCTURAL OPENING 685 1360 2035 2710

against fungal attack

Bay windows; Installation Recommended Detail 2

SQUARE BAY 1 ALL STANDARD MODULE RETURNS ARE 630

2 LIGHTS ON FRONT ELEVATION 1200 1234 1439 752

SQUARE BAY 1 ALL STANDARD MODULE RETURNS ARE 488

2 LIGHTS ON FRONT ELEVATION 915 949 1154 609

2 LIGHTS ON FRONT ELEVATION 1200 2101 1288 677 478 478

2 LIGHTS ON FRONT ELEVATION 915 1615 1003 535 378 378

NB: THIS IS NOT A BIRDS MOUTH SITUATION

2 LIGHTS ON FRONT ELEVATION 1200 2133 1288 677 478 478

2 LIGHTS ON FRONT ELEVATION 915 1648 1003 535 378 378

How to order Square Bay

1665mm 630mm 1979mm 787mm 1644mm 620mm

1710mm 630mm 2024mm 787mm 1689mm 620mm

1890mm 855mm 2204mm 1012mm 1669mm 845mm

3) Installation details i.e. Part L 2002

BAY BAY DIM A DIM B DIM C DIM D DIM E DIM F DIM G

1080mm 630mm 2163mm 1193mm 485mm 485mm 1054mm 617mm 686mm

1080mm 855mm 2482mm 1193mm 644mm 644mm 1054mm 842mm 911mm

1665mm 630mm 2747mm 1776mm 485mm 485mm 1638mm 617mm 686mm

1665mm 855mm 3065mm 1776mm 644mm 644mm 1638mm 842mm 911mm

1710mm 630mm 2792mm 1821mm 485mm 485mm 1683mm 617mm 686mm

1710mm 855mm 3110mm 1821mm 644mm 644mm 1683mm 842mm 911mm

1890mm 630mm 2972mm 2001mm 485mm 485mm 1864mm 617mm 686mm

1890mm 855mm 3290mm 2001mm 644mm 644mm 1864mm 842mm 911mm

*THESE SIZES ARE FINISHED OVERALL FRAME SIZES

ICE EFFECT* LEAF EFFECT* TULIP EFFECT*

DEW EFFECT* DIAMOND LEADED RECTANGULAR LEADED