Scribd Logo
Upload

Welcome to Scribd!

  • 471 views

    Circular Section Crack Width X Negative

    Uploaded by

    Abinash Modak
    This document provides calculations to estimate crack width in a circular concrete section under tension. Key details include: - The section has a diameter of 1200mm and is subjected to 5000kN of axial tension force. - Reinforcement consists of 23 T40 bars at 134.8mm spacing in the first layer. - Material properties and dimensions are provided for the concrete and steel. - Calculations are shown to determine the moment of inertia, steel stress, concrete strains, and estimated crack width of 0.181mm, which satisfies the design limit of 0.25mm.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Circular Section Crack Width X Negative

    Uploaded by

    Abinash Modak
    471 views1 page
    This document provides calculations to estimate crack width in a circular concrete section under tension. Key details include: - The section has a diameter of 1200mm and is subjected to 5000kN of axial tension force. - Reinforcement consists of 23 T40 bars at 134.8mm spacing in the first layer. - Material properties and dimensions are provided for the concrete and steel. - Calculations are shown to determine the moment of inertia, steel stress, concrete strains, and estimated crack width of 0.181mm, which satisfies the design limit of 0.25mm.

    Original Title

    circular section crack width x negative

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides calculations to estimate crack width in a circular concrete section under tension. Key details include: - The section has a diameter of 1200mm and is subjected to 5000kN of axial tension force. - Reinforcement consists of 23 T40 bars at 134.8mm spacing in the first layer. - Material properties and dimensions are provided for the concrete and steel. - Calculations are shown to determine the moment of inertia, steel stress, concrete strains, and estimated crack width of 0.181mm, which satisfies the design limit of 0.25mm.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    471 views1 page

    Circular Section Crack Width X Negative

    Uploaded by

    Abinash Modak
    This document provides calculations to estimate crack width in a circular concrete section under tension. Key details include: - The section has a diameter of 1200mm and is subjected to 5000kN of axial tension force. - Reinforcement consists of 23 T40 bars at 134.8mm spacing in the first layer. - Material properties and dimensions are provided for the concrete and steel. - Calculations are shown to determine the moment of inertia, steel stress, concrete strains, and estimated crack width of 0.181mm, which satisfies the design limit of 0.25mm.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 1

    Date Sheet

    RONNIE & KOH CONSULTANTS PTE LTD 12/11/2020 1


    Project : MCE C483 Designed by Checked by
    ly yee
    Description : for whole setion or almost whole section in tension

    CIRCULAR SECTION CRACK WIDTH CALCULATION TO CP73

    Section, stress & strain diagrams:

    x
    Cover

    M
    Dia

    N
    fs/Es

    fs
    Cover

    SECTION STRAIN STRESS

    Design Info:

    Service Axial Tension Force: Ns = 5000.0 kN (+ve for tension)


    Service Moment: Ms = 0.0 kNm

    Section Diameter Dia= 1200.0 mm

    1st layer Reinforcement : 23 T40


    2nd layer Reinforcement : 0 T40
    Bar Spacing S (straight): 134.80 mm

    Concrete Steel
    fcu = 40 N/mm2 fy = 460 N/mm2
    Ec_s = 28000 N/mm2 Es = 200000 N/mm2
    Ec_L = 14000 N/mm2 Cover = 85 mm
    Cmin = 50 mm

    Cover: Concrete cover to 1st layer reinforcement including links

    Crack Width Control Value: 0.25 mm

    Computation of Moment Inertia of reinf.

    1st layer Center of equivalent reinf. Ring, Rr1= 495 mm


    2nd layer Center of equivalent reinf. Ring, Rr2= 455 mm

    1st layer Width of reinf.Ring, t1= 9.29 mm


    2nd layer Width of reinf.Ring, t2= 0.00 mm
    1st layer Ir1= 3.5412.E+09 mm4
    2nd layer Ir2= 0.0000.E+00 mm4
    total Ir= 3.5412.E+09 mm4
    Zr= 7.1540E+06 mm3

    Computation of Crack Width

    Section Area Act = 1130973 mm2


    1st layer Area of reinf. Ast1= 28903 mm2
    2nd layer Area of reinf. Ast2 = 0 mm2
    total Ast = 28903 mm2

    Dist. to N.A. from top edge x = -17126351 mm

    Steel Stress fs= Ns/As+M/Zr = 172.99 N/mm2 <0.8fy, OK


    Concrete Strain at consider face: ε1 = (Dia-x)/(Dia-x-Cmin)*fs/Es = 0.000865
    Concrete stiffening factor ks = 1.0
    (Ks=1.5 if limiting crack width of 0.1mm, otherwise 1.0)
    stiffening effect of concrete: ε2 = ksAct((Dia-Cover+Cmin)-x)/(3EsAst(d-x)) = 0.000065
    εm = ε1-ε2 = 0.000800
    dist. from nearest rebar, acr = {(s/2)2+(Cmin+dia/2)2}0.5-dia/2 = 77.18 mm

    Estimated Crack Width, W= 3 acr εm/[1+2(acr-Cmin)/(Dia-x)] = = 0.181 mm OK!

    You might also like