Product Highlights

Flexible Deployment
Multiple software images tailor the feature set to the
network’s requirements, while Power over Ethernet
increases the range of possible deployment locations

Comprehensive Security Solution

Support for Access Control Lists (ACL), multiple user
authentication methods, and D-Link ZoneDefense
technology helps secure the network environment

Super Reliability
Fault-tolerant topologies ensure rock-solid
connectivity, and D-Link Green technology provides
eco-friendly power-saving

DGS-3620 Series
xStack L3 Managed Stackable Gigabit Switches
Features The DGS-3620 Series xStack L3 Managed Stackable Gigabit Switches deliver great
performance, flexibility, security, multi-layer QoS, and accessibility, along with redundant
Flexibility
power solutions for SMBs and enterprises. With high Gigabit port densities, Gigabit SFP and
• 20/48 10/100/1000BASE-T ports or 20 SFP slots 10-Gigabit SFP+ support, and advanced software solutions, these switches can act as either
• 4 Combo 10/100/1000BASE-T/SFP ports1 departmental access layer devices or core switches to form a multilevel network structured
• 4 10-Gigabit SFP+ uplink ports with backbone and centralized high-speed servers. Service providers can take advantage of
• 802.3af and 802.3at PoE support2 the high SFP density switches to structure the cores of Fiber to the Building (FTTB) networks
Security that are extended to the subscribers’ sites.
• L2/L3/L4 multi-layer Access Control
Standard and Enhanced Images
• External RADIUS/TACACS+ authentication
• SSH/SSL support The DGS-3620 Series is embedded with two different software images, the Standard Image (SI),
• 802.1X guest VLAN and the Enhanced Image (EI). The Standard Image provides fundamental features for campuses
• D-Link Safeguard Engine and enterprises such as switching, routing, multicasting, advanced Quality of Service (QoS),
• Unicast Reverse Path Forwarding (uRPF) and robust security features. The Enhanced Image supports OAM, BGP, IPv6 dynamic routing,
and tunneling which are all suitable for a service provider network.
Reliability
• Redundant Power Supply (RPS) support Unparalleled Flexibility
• 802.1D/802.1w/802.1s Spanning Tree
Easily deployed and simple to manage, the DGS-3620 Series can be stacked with any switch
• Loopback Detection (LBD)
that supports D-Link’s Single IP Management to form a multi-level network structured with
• Ethernet Ring Protection Switching (ERPS)
backbone and centralized high-speed servers. The virtual stack can include units located
High Bandwidth Physical/Virtual Stacking anywhere on the same network domain, and uses optional 10-Gigabit uplinks to move intra-
• Physical stack of up to 12 units, 576 Gigabit ports stack traffic at 20 Gbps full duplex speeds. The stack can also eliminate single point of failures,
• Virtual stack of up to 32 units using single IP cable distance barriers, limitations of physical stacking, and the need for stack cabling.
management
• 80 G per device physical stacking bandwidth4

OAM
• 802.3ah Ethernet link OAM
• 802.1ag, ITU-T Y.1731 service OAM
 DGS-3620 Series
xStack L3 Managed Stackable Gigabit Switches

Redundant Ring Stacking IPv6 Technology

Alternatively, depending on whether linear or fault-tolerant ring stacking The DGS-3620 Series also features comprehensive IPv6 support, including
is implemented, users can use a maximum of four 10-Gigabit SFP ports to IPv6 Tunnel, ICMPv6, DHCPv6, RIPng, OSPFv3, IPv4/IPv6 dual stack and more.
create a physical stack4. 12 units or 576 Gigabit ports can be configured for With 10-Gigabit connectivity and IPv6 support, the DGS-3620 Series enables
a stack using direct attach cables providing high bandwidth on the already you to future-proof your network for cost efficiency and longevity while
cost-efficient DGS-3620 Series. meeting the requirements that future IPv6-capable network devices require.

Security, Performance & Availability D-Link Green Technology

The DGS-3620 Series provides a complete set of security features including D-Link is striving to take the lead in developing innovative and power-saving
L2/L3/L4 multi-layer Access Control Lists and 802.1X user authentication via technology that does not sacrifice operational performance or functionality.
TACACS+ and RADIUS servers. D-Link ZoneDefense technology is built-in, The DGS-3620 Series implements D-Link Green technology, which includes a
allowing businesses to integrate the switch stack with D-Link NetDefend power-saving mode, smart fan feature, reduced heat dissipation, and cable
firewalls to implement a complete and proactive security infrastructure. length detection. The power-saving feature automatically powers down ports
that have no link or link partner, and ensures that LEDs are shut off when not
The DGS-3620 Series offers extensive VLAN support including GVRP and
needed. The Smart Fan feature allows for the built-in fans to automatically
802.1Q VLAN to enhance security and performance. A robust set of L2/L3/
turn on only at a certain temperature, providing continuous, reliable, and eco-
L4 QoS/CoS solutions help ensure that critical network services such as VoIP,
friendly operation of the switch.
ERP, Intranet, and video conferencing are served with proper priority. The
DGS-3620 Series provides D-Link’s Safeguard Engine to increase the switch’s
reliability, serviceability, and availability to prevent malicious flooding traffic
caused by worms or virus infections. Bandwidth Control can be flexibly set
for each port using pre-defined thresholds to assure a committed level of
service for end users. For advanced applications, flow-based bandwidth
control allows easy fine-tuning of service types based on specific IP addresses
or protocols.
 DGS-3620 Series
xStack L3 Managed Stackable Gigabit Switches

Technical Specifications DGS-3620-28TC DGS-3620-28SC

General
Interfaces • 20 10/100/1000BASE-T ports • 20 SFP ports
• 4 Combo 10/100/1000BASE-T/SFP ports • 4 Combo 10/100/1000BASE-T/SFP ports
• 4 SFP+ ports • 4 SFP+ ports

Optional Redundant Power Supply • DPS-500

Console Port • RJ-45

Management Port • 10/100BASE-T

Alarm Port • 1

SD Card Slot • 1

Performance
Switch Fabric • 128 Gbps

Packet Forwarding Rate • 95.24 Mpps

Packet Buffer • 2 MB

MAC Address Table • 32K entries

IPv4 Routing Table • 12K entries

IPv6 Routing Table • 6K entries

IPv4 Forwarding Table • 8K entries

IPv6 Forwarding Table • 4K entries

Jumbo Frame Size • 13000 bytes

PoE
PoE Standard -

PoE Power Budget -

 DGS-3620 Series
xStack L3 Managed Stackable Gigabit Switches

Physical
MTBF • 292976 hours • 298263 hours

Acoustics • 48.5 dB(A) maximum • 49.9 dB(A) maximum

Heat Dissipation • 155.8 BTU/hr • 144.2 BTU/hr

Power Input • 100 to 240 V AC, 50/60 Hz • 100 to 240 V AC, 50/60 Hz

Max Power Consumption • 45.1 W • 43.4 W

Dimensions • 441 x 310 x 44 mm (17.36 x 12.20 x 1.73 inches) • 441 x 310 x 44 mm (17.36 x 12.20 x 1.73 inches)

Weight • 4.15 kg (9.15 lbs) • 4.10 kg (9.04 lbs)

Ventilation • Smart fan (> 40 °C (104 °F): high speed; < 35 °C (95 °F): low speed)3

Operating Temperature • 0 to 50 °C (32 to 122 °F)

Storage Temperature • -40 to 70 °C (-40 to 158 °F)

Operating Humidity • 0% to 90% RH

Storage Humidity • 5% to 90% RH

Emission (EMI) • FCC Class A, CE Class A, VCCI Class A, IC, C-Tick

Safety • CB, cUL, LVD

Certifications • IPv6 Ready Logo Phase 2

 DGS-3620 Series
xStack L3 Managed Stackable Gigabit Switches

Technical Specifications DGS-3620-28PC DGS-3620-52T DGS-3620-52P

General
Interfaces • 20 10/100/1000BASE-T PoE ports • 48 10/100/1000BASE-T ports • 48 10/100/1000BASE-T PoE ports
• 4 Combo 10/100/1000BASE-T/SFP • 4 SFP+ ports • 4 SFP+ ports
ports
• 4 SFP+ ports

Optional Redundant Power Supply • DPS-700 • DPS-500 • DPS-700

Console Port • RJ-45

Management Port • 10/100BASE-T

Alarm Port • 1

SD Card Slot • 1

Performance
Switch Fabric • 128 Gbps • 176 Gbps • 176 Gbps

Packet Forwarding Rate • 95.24 Mpps • 130.95 Mpps • 130.95 Mpps

Packet Buffer • 2 MB

MAC Address Table • 32K entries

IPv4 Routing Table • 12K entries

IPv6 Routing Table • 6K entries

IPv4 Forwarding Table • 8K entries

IPv6 Forwarding Table • 4K entries

Jumbo Frame Size • 13000 bytes

PoE
PoE Standard • 802.3af and 802.3at - • 802.3af and 802.3at

PoE Power Budget • 370 W (760 W with DPS-700 RPS) - • 370 W (760 W with DPS-700 RPS)
 DGS-3620 Series
xStack L3 Managed Stackable Gigabit Switches

Physical
MTBF • 236811 hours • 247929 hours • 225645 hours

Acoustics • 52.1 dB(A) maximum • 54.2 dB(A) maximum • 56.2 dB(A) maximum

Heat Dissipation • 1712.5 BTU/hr • 259.1 BTU/hr • 1763.3 BTU/hr

Power Input • 100 to 240 V AC, 50/60 Hz • 100 to 240 V AC, 50/60 H • 100 to 240 V AC, 50/60 Hz

Max Power Consumption • 502.2 W • 76.0 W • 517.1 W

Dimensions • 441 x 310 x 44 mm (17.36 x 12.20 x • 441 x 310 x 44 mm (17.36 x 12.20 x • 441 x 310 x 44 mm (17.36 x 12.20 x
1.73 inches) 1.73 inches) 1.73 inches)

Weight • 5.76 kg (12.70 lbs) • 5.13 kg (11.31 lbs) • 6.30 kg (13.89 lbs)

Ventilation • Smart fan (> 40 °C (104 °F): high speed; < 35 °C (95 °F): low speed)3

Operating Temperature • 0 to 50 °C (32 to 122 °F)

Storage Temperature • -40 to 70 °C (-40 to 158 °F)

Operating Humidity • 0% to 90% RH

Storage Humidity • 5% to 90% RH

Emission (EMI) • FCC Class A, CE Class A, VCCI Class A, IC, C-Tick

Safety • CB, cUL, LVD

Certifications • IPv6 Ready Logo Phase 2

By default, the fan speed is low. When the temperature inside the chassis is over 40˚C (104 ˚F) , the fan switches to high speed until the temperature drops below 35 ˚C (95 ˚F).
3
 DGS-3620 Series
xStack L3 Managed Stackable Gigabit Switches

Software Features
Stackability • Virtual stacking support • Physical stacking
• D-Link Single IP Management • Supports duplex chain/ring
• Up to 32 devices per virtual stack topology
• Up to 20G stacking bandwidth • Up to 80G stacking bandwidth4
• Up to 12 units per stack

L2 Features • MAC address table: 32K • MLD snooping • 802.3ad link aggregation
• Flow control • MLD v1 snooping • Max. 32 groups per device
• 802.3x Flow control • Supports 2K groups • 8 Gigabit ports or 2 10-Gigabit
• HOL blocking prevention • Host-based MLD snooping fast ports per group
• Jumbo frames up to 13000 bytes leave • Port mirroring
• IGMP snooping • Spanning tree • Supports 4 mirroring groups
• IGMP v1/v2/v3 snooping • 802.1D-2004 STP • Supports one-to-one, many-
• Supports 2K groups • 802.1w RSTP to-one, flow-based, and RSPAN
• Port/host-based • 802.1Q-2005 MSTP mirroring
• IGMP snooping fast leave • BPDU filtering • L2 protocol tunneling
• Root restriction • ERPS (Ethernet Ring Protection
• Loopback detection Switching)

VLAN • VLAN group • 802.1v protocol VLAN • MAC-based VLAN

• Max. 4K static VLAN groups • GVRP • VLAN trunking
• Max. 4K dynamic VLAN groups4 • Double VLAN (Q-in-Q) • Super VLAN
• 802.1Q tagged VLAN • Port-based Q-in-Q • Voice VLAN
• Surveillance VLAN4 • Selective Q-in-Q • Subnet VLAN

L3 Features • 256 IP interfaces • Loopback interface • Proxy ARP

• Bidirectional Forwarding Detection • VRRP • Gratuitous ARP
for OSPF/VRRP4

L3 Routing • 12K routing entries shared by IPv4/v6 • 256 static routing entries for IPv4, 128 • OSPF
• Max. 12K IPv4 routes entries for IPv6 • OSPF v2
• Max. 6K IPv6 routes • Supports ECMP/WCMP • OSPF passive interface
• 8K L3 forwarding entries shared by • Policy-based routing • Stub/NSSA area
IPv4/v6 • RIP v1/v2 • OSPF equal cost route
• Max. 8K IPv4 entries
• Max. 4K IPv6 entries

Multicasting • 2K multicast groups • PIM-SM • IGMP v1/v2/v3

• PIM-DM • PIM sparse-dense mode

QoS (Quality of Service) • 802.1p Class of Service (CoS) • CoS based on • Supports following actions for flows:
• 8 queues per port • Switch port • Remark 802.1p priority tag
• Queue handling • VLAN ID • Remark TOS/DSCP tag
• Strict • 802.1p priority queues • Bandwidth control
• Weighted Round Robin (WRR) • MAC address • Flow statistics
• Strict + WRR • IPv4/v6 address • Committed Information Rate (CIR),
• WRED • DSCP min. granularity 1 Kbps.
• 802.1Qbb priority-based flow control • Protocol type • Bandwidth control
on 10G port4 • IPv6 traffic class • Port-based (ingress/egress, min.
• IPv6 flow label granularity 8 Kbps)
• TCP/UDP port • Flow-based (ingress, min.
• User-defined packet content granularity 8 Kbps)
• Time-based QoS

ACL (Access Control List) • Ingress ACL: support up to 6 profiles • ACL based on • ACL statistics
and 256 rules per profile • 802.1p priority • Time-based ACL
• Egress ACL: support up to 4 profiles • VLAN ID
and 128 rules per profile • MAC address
• Ether type
• IPv4/v6 address
• DSCP
• Protocol type
• TCP/UDP port number
• IPv6 traffic class
• IPv6 flow label
• User-defined packet content
 DGS-3620 Series
xStack L3 Managed Stackable Gigabit Switches

Green • Power saving by link status • Power saving by LED shut-off • Power saving by system hibernation
• Power saving by cable length • Power saving by port shut-off • 802.3az Energy-Efficient Ethernet5

Security • SSH v2 • IP-MAC-port binding • D-Link safeguard engine

• SSL v1/v2/v3 • ARP packet inspection • DHCP server screening
• Port security for up to 3328 MAC • IP packet inspection • CPU interface filtering
addresses for port/system/VLAN • DHCP snooping • ARP spoofing prevention
• Broadcast/multicast/unicast storm • DHCPv6 and NDP snooping • BPDU attack protection
control • Supports up to 500 address • Unicast reverse path forwarding
• Traffic segmentation binding entries per device • DoS attack prevention
• UDP helper

AAA • 802.1X • MAC-based Access Control (MAC) • Microsoft® NAP

• Port-based access control • Port-based access control • Supports 802.1X NAP
• Host-based access control • Host-based access control • Supports DHCP NAP
• Dynamic VLAN assignment • Dynamic VLAN assignment • Guest VLAN
• Web-based Access Control (WAC) • Japan Web-based Access Control • RADIUS and TACACS+ authentication
• Port-based access control (JWAC) for switch access
• Host-based access control • Host-based access control • 4-Level user account
• Dynamic VLAN assignment

Management • Web-based GUI • sFlow • Debug command

• Command Line Interface (CLI) • LLDP/LLDP-MED • SNTP
• Telnet server • BootP/DHCP client • ICMPv6
• Telnet client • DHCP auto-configuration • DHCPv6 client
• TFTP client • DHCP relay • DHCPv6 relay
• ZModem • DHCP relay option 60; 61 • DHCPv6 server
• SNMP v1/v2c/v3 • DHCP relay option 82 • DHCPv6 prefix delegation
• SNMP trap • DHCP server • Trusted host
• System log • Flash file system • MTU setting
• RMON v1 • Multiple images • Microsoft® NLB support
• Supports 1,2,3,9 groups • Multiple configurations • Secure FTP
• RMON v2 • CPU monitoring • FTP client4
• Supports ProbeConfig group • IPv4/IPv6 DNS client • DHCP client option 124
• Scheduled Reboot4

OAM • 802.3ah Ethernet link OAM • 802.3ah D-Link extension: D-Link • IEEE1588 Precision Time Protocol
• Cable diagnostics Unidirectional Link Detection (DULD) (PTP)

MIB/IETF Standards • RFC1213 MIB-II • RFC2787 VRRP MIB • RFC2068, 2618 HTTP
• RFC1493, 4188 bridge MIB • RFC2932 IPv4 multicast routing MIB • RFC2338 VRRP
• RFC1907 SNMPv2 MIB • RFC2934 PIM MIB for IPv4 • RFC2529, 3053, 3056 IPv6 Tunnel
• RFC2571~2576 SNMP MIB • RFC2620 RADIUS accounting client • RFC2138 RADIUS
• RFC1271, 2819 RMON MIB MIB • RFC2139 RADIUS Accounting
• RFC2021 RMON v2 MIB • RFC2933 IGMP MIB • RFC1492 TACACS
• RFC1398, 1643, 1650, 2358, 2665 • RFC2925 ping MIB • RFC3176 sFlow
Ether-like MIB • RFC2925 traceroute MIB • RFC2598 DiffServ Expedited
• RFC2668 MAU MIB • D-Link private MIB Forwarding (EF)
• RFC2674, 4363 802.1p MIB • RFC768 UDP • RFC2460 IPv6
• RFC2233, 2863 IF MIB • RFC783 TFTP • RFC2461, 4861 IPv6 Neighbor
• RFC2618 RADIUS authentication • RFC 791 IP Discovery (ND)
client MIB • RFC 792 ICMP • RFC2462, 4862 IPv6 stateless address
• RFC1724 RIP v2 MIB • RFC 793 TCP autoconfiguration
• RFC1850 OSPF v2 MIB • RFC 826 ARP • RFC1981 IPv6 path MTU discovery
• RFC2096, 4292 IP forwarding table • RFC854 Telnet • RFC4213 IPv4/IPv6 dual stack
MIB (CIDR) • RFC951, 1542, 2131 BootP

Enhanced Image (EI) Features

L3 Features • IPv6 tunneling
• Static
• ISATAP
• GRE
• 6to4

L3 Routing • RIPng (IPv6) • OSPF v3 (IPv6) • BGP v4

• BGP+4

Multicasting • PIM-SM v6 • DVMRP v3

 DGS-3620 Series
xStack L3 Managed Stackable Gigabit Switches

OAM • 802.1ag Connectivity Fault • ITU-T Y.1731

Management (CFM)

Order Information
Part Number Description

DGS-3620-28TC/SI 20 10/100/1000BASE-T and 4 Combo 10/100/1000BASE-T/SFP and 4 SFP+ with embedded SI image

DGS-3620-28TC/EI 20 10/100/1000BASE-T and 4 Combo 10/100/1000BASE-T/SFP and 4 SFP+ with embedded EI image

DGS-3620-28SC/SI 20 SFP and 4 Combo 10/100/1000BASE-T/SFP and 4 SFP+ with embedded SI image

DGS-3620-28SC/EI 20 SFP and 4 Combo 10/100/1000BASE-T/SFP and 4 SFP+ with embedded EI image

DGS-3620-28PC/SI 20 10/100/1000BASE-T PoE and 4 Combo 10/100/1000BASE-T PoE/SFP and 4 SFP+ with embedded SI image

DGS-3620-28PC/EI 20 10/100/1000BASE-T PoE and 4 Combo 10/100/1000BASE-T PoE/SFP and 4 SFP+ with embedded EI image

DGS-3620-52T/SI 48 10/100/1000BASE-T and 4 SFP+ with embedded SI image

DGS-3620-52T/EI 48 10/100/1000BASE-T and 4 SFP+ with embedded EI image

DGS-3620-52P/SI 48 10/100/1000BASE-T PoE and 4 SFP+ with embedded SI image

DGS-3620-52P/EI 48 10/100/1000BASE-T PoE and 4 SFP+ with embedded EI image

Note: Stacking cable and SD card are not included with the above models.

Optional Products - Enhanced Image License Upgrades

DGS-3620-28TC-SE-LIC DGS-3620-28TC Standard Image to Enhanced Image License

DGS-3620-28SC-SE-LIC DGS-3620-28SC Standard Image to Enhanced Image License

DGS-3620-28PC-SE-LIC DGS-3620-28PC Standard Image to Enhanced Image License

DGS-3620-52T-SE-LIC DGS-3620-52T Standard Image to Enhanced Image License

DGS-3620-52P-SE-LIC DGS-3620-52P Standard Image to Enhanced Image License

Optional Products - Management Software

DV-600S D-View 6.0 Network Management Software Standard Edition

DV-600P D-View 6.0 Network Management Software Professional Edition

Optional Products - 10 Gbps SFP+ Transceivers

DEM-431XT 10 GBASE-SR SFP+ transceiver (w/o DDM), 80 m: OM1 & OM2 MMF, 300 m: OM3 MMF

DEM-431XT-DD 10GBASE-SR SFP+ transceiver (with DDM), 80 m: OM1 & OM2 MMF, 300 m: OM3 MMF

DEM-432XT 10GBASE-LR SFP+ transceiver (w/o DDM), 10 km

DEM-432XT-DD 10GBASE-LR SFP+ transceiver (with DDM), 10 km

DEM-433XT 10GBASE-ER SFP+ transceiver (w/o DDM), 40 km

DEM-433XT-DD 10GBASE-ER SFP+ transceiver (with DDM), 40 km

DEM-434XT 10GBASE-ZR SFP transceiver (w/o DDM), 80 km

DEM-435XT 10GBASE-LRM SFP+ transceiver (w/o DDM), 220 m: OM1 & OM2 MMF, 300 m: OM3 MMF

DEM-435XT-DD 10GBASE-LRM SFP+ transceiver (with DDM), 220m: OM1 & OM2 MMF, 300 m: OM3 MMF

DEM-436XT-BXU 10GBASE-LR BiDi SFP+ transceiver (w/o DDM) 20 km, TX: 1270 nm, RX: 1330 nm

DEM-436XT-BXD 10GBASE-LR BiDi SFP+ transceiver (w/o DDM) 20 km, TX: 1330 nm, RX: 1270 nm
 DGS-3620 Series
xStack L3 Managed Stackable Gigabit Switches

Optional Products - 1 Gbps SFP Transceivers

DEM-310GT SFP transceiver, 1000BASE-LX standard, single-mode fiber, max. distance 10 km, 3.3 V operating voltage

DEM-311GT SFP transceiver, 1000BASE-SX standard, multi-mode fiber, max. distance 550 m, 3.3 V operating voltage

DEM-312GT2 SFP transceiver 1000BASE-SX standard, multi-mode fiber, max. distance 2 km, 3.3 V operating voltage

DEM-314GT SFP transceiver, 1000BASE-LHX standard, single-mode fiber, max. distance 50 km, 3.3 V operating voltage

DEM-315GT SFP transceiver, 1000BASE-ZX standard, single-mode fiber, max. distance 80 km, 3.3 V operating voltage

DEM-330T WDM SFP transceiver, 1000BASE-LX standard, single-mode fiber, max. distance 10 km,
3.3 V operating voltage, Tx wavelength 1550 nm, Rx wavelength 1310 nm

DEM-330R WDM SFP transceiver, 1000BASE-LX standard, single-mode fiber, max. distance 10 km,
3.3 V operating voltage, Tx wavelength 1310 nm, Rx wavelength 1550 nm

DEM-331T WDM SFP transceiver, 1000BASE-LX standard, single-mode fiber, max. distance 40 km,
3.3 V operating voltage, Tx wavelength 1550 nm, Rx wavelength 1310 nm

DEM-331R WDM SFP transceiver 1000BASE-LX standard, single-mode fiber, max. distance 40 km,
3.3 V operating voltage, Tx wavelength 1310 nm, Rx wavelength 1550 nm

DEM-211 SFP transceiver, 100BASE-FX multi-mode fiber, max. distance 2 km, 3.3 V operating voltage

DEM-210 SFP transceiver, 100BASE-FX single-mode fiber, max. distance 15 km, 3.3 V operating voltage

DEM-220T 100Base-BX, wavelength Tx:1550 nm, Rx:1310 nm, single-mode, 20 km

DEM-220R 100Base-BX, wavelength Tx:1310 nm, Rx:1550 nm, single-mode, 20 km

DGS-712 SFP transceiver, 1000BASE-TX

Optional Products - 10 Gbps SFP+ Direct Attach Cables

DEM-CB100S 10-GbE SFP+ 1 m direct attach cable

DEM-CB300S 10-GbE SFP+ 3 m direct attach cable

DEM-CB700S 10-GbE SFP+ 7 m direct attach cable

Optional Products - Redundant Power Supplies

DPS-500 140 W redundant power supply

DPS-500DC 140 W DC redundant power supply

DPS-7002 589 W redundant power supply

1
For DGS-3620-28TC/28SC/28PC models only.
2
For DGS-3620-28PC/52P models only.
3
By default, the fan speed is low. When the temperature inside the chassis is over 40˚C (104 ˚F) , the fan switches to high speed until the temperature drops below 35 ˚C (95 ˚F).
4
Supported by R 2.6. When the switch is used in a stack, the last 2/4 ports are dedicated stacking ports and cannot be used as uplink ports.
5
Supported by hardware version B1 and later.

Updated 2015/04/02

Specifications are subject to change without notice. D-Link is a registered trademark of D-Link
Corporation and its overseas subsidiaries. All other trademarks belong to their respective owners.
©2015 D-Link Corporation. All rights reserved. E&OE.