Scribd
Upload
30 views1 page

Electric Soft Test (20 Min) Create A Sequence Drawing

The document describes 3 sequence drawings for an electric soft test. The first turns a lamp on then off using two push buttons. The second adds a 5 second wait after the first button. The third causes the lamp to blink on and off for 2 seconds repeatedly until the second button is pressed, turning the lamp off.

Uploaded by

muhamad soleh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
30 views1 page

Electric Soft Test (20 Min) Create A Sequence Drawing

The document describes 3 sequence drawings for an electric soft test. The first turns a lamp on then off using two push buttons. The second adds a 5 second wait after the first button. The third causes the lamp to blink on and off for 2 seconds repeatedly until the second button is pressed, turning the lamp off.

Uploaded by

muhamad soleh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Electric soft test( 20 min)

1 Create a sequence drawing


1 Push PB1(1a) < 1 time > Push PB1(1a) X0

2 Lamp 1 ON Push PB2(1a) X1

3 Push PB2(1a) < 1 time > Lamp 1 Y0

4 Lamp 1 OFF

2 Create a sequence drawing


1 Push PB1(1a) < 1 time > Push PB1(1a) X0

2 Wait 5 seconds by internal counter Push PB2(1a) X1

3 Lamp 1 ON Lamp 1 Y0
4 Push PB2(1a) < 1 time >
5 Lamp 1 OFF

3 Create a sequence drawing


1 Push PB1(1a) < 1 time >
2 Lamp 1 ON < 2 seconds > and OFF < 2 seconds > *This action contny until No.3

3 Push PB2(1a) < 1 time >


4 Lamp 1 OFF Push PB1(1a) X0

Push PB2(1a) X1

Lamp 1 Y0

You might also like