Presidential Massage Chair

User 's Manual

Please read SAFETY INSTRUCTIONS carefully before using the chair.

 1.Thank you for choosing Infinity Presidential Massage Chair.
2.Please read this manual carefully before using the massage chair.
Presidential Massage Chair 3.Please keep this manual in a safe place for further reference.
4.Please pay attention to SAFETY INSTRUCTIONS.
Function Introduction
1. Infinity Presidential features a new patented soft 3D massage mechanism. It is Note: We reserve the right for design modification. It is subject to change
capable of reproducing kneading, knocking, shiatsu, and fast rubbing back massage without notice. The pictures in this manual are only for reference.
like a live professional massage therapist. Please refer to the actual product.
2. The actual massage rollers are heated so they can perform heat massage on the
neck, shoulder, and neck. Helps relax stressed muscles and promote blood circulation. 目录
Content
3. Super long rail design allows for multi-angle massage from neck to thigh. Amazing
whole body massage!
Safety instructions 1
4. Chair moves forward before massage, allowing you to put the chair close to the wall.
准

Preparation
Saves space and looks great! External structure parts 5
5. One button puts the chair in full zero gravity or lie flat position, allowing you to
备
Internal structure parts 6
relax your mind and body completely. 工
Mechanical components diagram
6. Ergonomic remote control uses a beautiful high definition LCD to show massage
area, massage techniques, and system state in real time. Allows for easy selection
作 7

of customized massage programs. Mechanical components list 8

7. Chair is equipped with state of the art bluetooth technology allowing the option of

Installation
安装
operating the chair with phone or tablet and not using the remote at all.
Installation 9
8. Bluetooth wireless music player integrates music player technology with massage
technology. This allows the massage to sync with your music allowing a personalized
experience with every massage.

Massage Operation
9. With omnibearing rollers, air pressure massage function, and foot heating system,
your daily stress will melt away.
按 The adjustment before massage 13

10. Armrests are equipped with pulse air pressure massage to promote blood
摩 Manual control 15
circulation in the arms and relaxation. 操 Operation instruction &function illustration 21
11. Equipped with multiple sets of airbags in the waist and hip area. 作 After massage 24
12. Footrest can extend over 7 inches allowing for comfortable massage for different
height people.

Maintenance
护理
Cleaning and maintenance 25

Bluetooth function: 1, download the Infinity APP from to the smart phone
26
其
Malfunction guide
Others

or tablet PC; 2, turn on the Bluetooth function at the smart phone or tablet PC
他

3, choose Infinity and connect it; 4, open the APP, then you can control the Technical data 27
massage chair ,just like a remote control.
Bluetooth wireless music: After you connect smart phone or tablet PC with the chair,
open the music player software, then you can play the music .
Please keep this manual in a safe place for future reference.
1 Safety instructions Safety instructions 2

Please read this manual carefully to make sure the installation and operation of the
massage chair is correct.
“Safety Instructions” is provided in both Warning and Caution for important safety Warning
information.
Osteoporosis patient.
People with heart disease including embedded pacemaker or
other medical electronic device inside the body.
For pregnant women or people with health problems,

▲
please consult doctor before use. People who are
Warning　 This sign indicates warning of causing personal injury. Patients with a high fever forbid to use this machine. not suitable to
Children should not use this chair. use the chair
Please don't sleep in the chair.
Do not use this chair when intoxicated.
Caution 　 This sign indicates possibility of damage to the chair.

Make sure there are no kids or pets or other objects around

(under,behind or in front of) the chair at the moment of backrest,
Symbol meaning leg-rest up/down or leg-rest retraction/extension from reclining
position.
During operation, if you have body abnormal,please stop the
operation and go to consult your physician.
Please do not take strong massage on the head. Accident/injury
This sign indicates self disassembly Do not massage belly or knees,be careful when massage neck.
This sign indicates forbidden behavior.
is forbidden. Children or pets are not allowed to play on the chair especially

Preparation
Preparation

during massage. Standing or sitting on the back or armrest is not

allowed either.
Those who move around difficultly or can't express themselves
This sign indicates must follow This sign indicates correct operation must be taken care of strictly and continuously during massage.
instruction to operate. of cable.
Insert the plug of the chair into correct and suitable power socket.
Make sure the plug is completely inserted into the socket to Fire and electric
reduce short circuit or fire risk. shock
Unplug the power when not in use,stop all massage functions
The following should be kept for any further references. and turn off on/off key before unplugging.
It is prohibited to use the massage chiar while any items
covered the massage chair ventilation holes.
Accident
Massage cushions of the chair are not allowed to fold for storage.
The machine is forbidden for no-load running for a long time.
Power cord, plug, socket can't be used in broken or loose contact
condition.
Don't use other electric power except rated voltage in case of fire, Fire and electric
electric shock or any breakdown. shock
Any broken, repaired, knotted, twisted power cord should be
disposed of and replaced.
If the chair works dysfunctional, or is broken, splashed with water or
falls into water, please have it repaired by a professional repairman or
send the chair to assigned service agent.Self-modification, disassembly
or maintenance is forbidden.
If power cord or plug is damaged, please don't replace it yourself, please Disassembly
contact us or appointed dealer for replacement. and
To avoid electric shock or bodily harm, please don't open or disassemble
maintenance
any part of the chair, there is not any attached part of the chair for
maintenance by customers.
Check to see if leather or cloth material on the back and other areas
is broken or not. If broken, even though it is small, please stop using
the chair, unplug the power and have it repaired
3 Safety instructions Safety instructions 4

Caution Caution

Please operate the chair in a flat or level place To avoid sudden falling. Don't use or store the chair in the wet environment like
Position the chair 4” from the wall to allow for nearing the swimming pool, or bathroom. To avoid leakage or
To make sure the back lying. electric shock.
sufficient space to recline up and down. Keep the chair and remote control dry all the time.
The maximum suggested operating time is 20mins.
5mins for each position beginning with the slight- step Give your body time to recover.
massage. Massaging too long in one position is not Make sure to install the earth wire in correct way(Incorrect
recommended. install way may cause electric shock. If you don't know how
Before sitting on the chair to avoid injury please to install, please find a professional electrician)
inspect everything to confirm that the massage heads
are in the correct position. Don't use plug adapter (If the enclosed plug doesn't match To avoid electric shock.
Remote control should be put in the pocket when not in with socket, please don't change the plug by yourself and
use. Do not put the remote control anywhere casually To avoid accidental injury. find a professional electrician to install a matched
in case of remote control damage. socket. )
Please make sure that the power switch is at the“OFF”
position before inserting the plug into the socket. Unplug the power before cleaning the chair.
To avoid the accident when turn on Unplug the power after using the chair.
Turn off all controls before removing plug from outlet.
the power.
Unplug the power when any damage on the power. To avoid electric shock
Make sure the plug completely insert into the socket. To reduce short circuits and any
fire hazard. or fire harzard.
Checking whether any damage on wire,make sure no Hold the plug to unplug the power but not try to pull the wire
water or damage on wire. to unplug the power.
To avoid electric shock in any
Preparation

Preparation
Installing earth wire in correct way.
The plug must be inserted into socket leakage or breakdown. Please turn off the power switch and unplug the power after
with earth ground. massage. To avoid accidents

Don't press with hands or step on the massage heads with feet. To avoid damage or accidents
Unplug the power immediately when electricity goes off. when power on again.
Don't put hands between the working massage heads.
Don't put hands or feet in the gap of mechanical parts.
Don't drop or embed anything into the slot of massage chair.
Don't stand or sit or put anything on the backrest, armrest or
Grounding instruction
leg-rest.
Don't stand on the chair during operation.
Don't move the chair during operation.
※The chair is equipped with a cord having an grounding conductor.The plug must be
Don't pull out the plug or turn off the power during operation.
Don't put your hands or head between leg-rest or beneath. To avoid accidents or injury plugged into an appropriate socket that is properly installed
Don't use the massage chair while wearing hair ornaments. and matched with the plug.
Make sure pockets are empty when massaging.
Don't sit or press on the backrest when the chair is in reclining
position.
Replace fuse
Don't use chair with bare skin or thin clothing. Can cause
skin irritation.
※When the fuse is burned out, please turn off the switch
and unplug the power. Replace the fuse with another of the same
Keep the chair away from heat, wet, sharp things and rating. Or you can find an electrician to replace the fuse.
corrosive materials.
To use electric blanket or other heating products on
the chair is forbiden.
Don't put in the space of dust serious or corrosive gas
environment,
To avoid fading and discoloration on
Don't put the chair in a small space places or use in upholstery or hardening on PU. Gas pipe: Could cause fire.

▲
the bad air circulation places.
Phone wire and lightning rod: probably cause electric shock
Keep the chair away from stove or other heating products.
Don’t put the chair directly under the sun or other high and fire.
temperature places. Earth wire is not allowed Water pipe: Plastic will not provide correct ground.
to be in these places
Don't use the chair outdoors.
5 External structure parts Internal structure parts 6

External structure Internal structure

Right shoulder massage device Loud speaker

Head pad

LED
Left shoulder Heating massage rollers
Back seat cushion
massage device
Right armrest
Left armrest Shoulder airbag

Seat LED light

Legrest Air bags in the lower back

Footrest Air bags in the arm area

Castor
Preparation

Preparation
Air bags in the side seat

Air bags in the calf area

靠背
Backrest Side airbag of leg
Remote control pocket

Power switch
Power case
foot parts airbag

Sole heating plate

Foot roller and shiatsu

Power cord
socket
Fuse holder
13
7 Mechanical components diagram Mechanical components list 14
8

Explosion Diagram Mechanical components list

NO. Name Q'ty NO. Name Q'ty

Left side of seat airbag

1 Right armrest assembly 1 22 assembly 1

2 Right side fender 1 23 Backrest assembly 1

3 Right side of internal 24

1 Pillow 1
fender assembly

4 Right armrest convert 1 25 1

Back and seat cushion
frame assembly
Legrest and footrest Right side of seat airbag
5 1 26 1
assembly assembly

6 Front fender assembly 1 27 Seat frame surface assembly 1

7 Seat electric actuator 1 28 Footrest electric actuator 1

Sliding forward electric

8 1
按摩操作

按摩操作
actuator

Preparation
Preparation

Left armrest convert

9 frame assembly
1

10 Left side fender 1

11 Remote control pocket 1

12 Left amrest assembly 1

Left side of internal

13 fender assembly
1
Seat bottom frame
14 assembly 1
28

15 Power box cover 1

16 Power case assembly 1

17 Back cover assembly A 1

18 Back cover assembly B 1

19 Shoulder device assembly 1

20 Back frame assemly 1

21 RK08 massage machine 1

9 Installation Installation 10

Installation(1) Installation(2)

Step 1. How to move the chair Step 1. How to move the chair
①Take the chair out of the carton box including the chair body, back seat pad, ③Take out the legrest device from the legrest carton box . Catching two sides of the
pillow, power cord, remote control and control pocket. legrest and take it out . Put it on the flat ground . (Pay attention to prevent scratches )
(As the photo shows)

Two people grasp left Legrest device

and right seat metal
frame, then
take the main body of
massage chair out of
the box .

Head pad

Massage chair
main body
Installation

Installation
Step 2. How to assemble the legrest
Install the legrest to the main body, ①Unscrew the bolt on the hanger of the legrest.
Speed
Width
Intensity
3D：
20 min

②Connect the legrest's air hose with the corresponding air nozzles of the main body tightly.
Set function by pressing Menu key.
③Connect the two power cables' plug to the socket tightly , pay attention to the color and
On/Off

Menu
Hot
Rocks
Air
Intensity

Auto
direction, black to black one, white to white one. ④ Install the rotation shaft bushings, raise
3D- OK 3D+

the rotation shaft bracket on hangers, raise the legrest with hands, put rotation shaft into
Zero

hangers on main body, and put rotation shaft bracket down. ⑤ Screw it back tight.
Remote Control Remote control pocket Electric power cable Back seat cushion ⑥Connect the legrest leather piece with seat by velcro .

④ Axle cover ③ Socket ② Air nozzle White Air tube ②

③ Black

②Take out the left ,right armrest from the amrest carton box,Catching the two side of the
armrest and take them out slowly. (The armrest is placed upside down in the box):put the Hanger

armrest on the table or ground in flat(pay attention to prevent scratches), Catch the left and
right two sides from the front of armrest and take it slowly.
Air hoses connect with the
air nozzle and power line
① Bolt plug connect with the socket

Axle Power line plug ④

Air tube
⑤

Rotation Bushing

Left armrest Lift the legrest to

Right armrest put the axle into
the hanger Put down the
axle cover and
screw on the
bolt
11 Installation Installation 12

Installation(3) Installation(4)
Step 3. How to assemble the left and right armrest Step 4. Fix the back seat pad,pillow and remote control pocket.
Lift the front side of armrest and plug it into the rotating stand on the side of chair body. Connect the Put the back seat cushion, head pad onto the backrest
air hose of armrest with the air tubes on the side of chair body tightly. Black air tube should be connected and connect the two parts with zipper and velcro.
with air hose marked with No. 1 and grey air tube with air hose marked with No. 2. Plug the power cord
on the side of chair body into the socket of armrest in the right direction. ④Insert the rear side fixing plate Tips
into the fixing hole behind the chair body, and press the armrest downwards gently. Back seat cushion Head pad
In order to get exact correct body test data for comfortable
⑤Remove the rubber plug of armrest inner plate. Fix the screws inside the hole tightly, then put on the massage effect, when you sit on the chair, please make the Remote control
bottom rim of the head pad flush with your ears before
▲ rubber plug tightly.⑥Assemble the other armrest according to the above steps.
Don't squeeze air tube or power cord during the installation procedure. zippering the said two parts. pocket

How to disassemble the armrest. 1.Adjust the back-rest to the lowest and restore the leg-rest before
disassembly. 2.Remove the rubber plug inside the armrest and loosen the screw inside the hole. 3.Tilt the Installation of back seat
armrest a little upwards and disconnect the air tubes and power cord. 4.Continue to tilt the armrest Connect the pillow ② cushion should pay
upwards to dismantle it. 5.Insert the rubber plug into the round holes inside the armrest. to the backrest
by velcro
Back seat cushion
connect to upper ▲ attention to: make the
middle part of back
backrest by zipper cushion align to the
Inner plate of armrest ④ middle part of backrest
Fixed panel
Head pad
Fixed hole Back seat cushion
Backrest zipper connect to
Back seat ① seat,connect the
cushion velcros between
Air tube them.
Back seat cushion
Power cord connect to the two
Installation

Installation
sides of backrest
Rotating stand on the by zipper Insert the velcro of the
side of chair body control pocket into the
③ upper part of right side
⑤ inner armrest airbag
Cylindrical plug and connect it with the
Assembly steps velcro there.

① ②
Step 5. Restore the chair.
1 Plug the cable line in the hole a on the
power box as shown in the right picture.
2 Insert the plug of cable line into the socket.
1

3 Turn on the switch behind the power box. Power box socket
④ (Switch on/off "O/I", press I down to turn it on.)
1 2 4 Press on/off button on the control twice to
restore the chair. The chair will return to its
③ ② initial state.
Select the massage function by control or ipad. 2
Enjoy the relaxing and pleasant massage.
⑤ 5 In ON status, the USB port can be used for charging
mobile. 3

Make sure the switch is off before you insert

the plug of cable line into the socket. Speed
Width
20 min

4 Intensity
3D：

Set function by pressing Menu key.

Hot Air
On/Off Intensity
Rocks

Menu Auto

3D- OK 3D+

USB
Chair's initial state Zero
13 The adjustment before massage The adjustment before massage 14

Environment Check environment How to move massage chair Adjustment before massage
Space size for using the chair Before adjustment
Caution Caution
Make sure the
Don’t use the chair in wet places liks near At least 4” from wall. massage machine
Don’t move chair when it’s working in case rollers stop in the
swimming pool , bath room to avoid lea- upper part of backrest,
of accidents or damage
kage or electric shock. then sit on the chair slowly
to avoid wrong position of
Don’t use under sunlight or near stove the massage head.
or other heating device to avoid upho-
Body Scan
lstery deterioration How to move
When doing body scan, if massage sensors
Bind the cables and put them in the seat to can't detect the shoulder position, the chair
Please use chair in flat place to avoid default position is middle.
avoid damage when moving.
chair falling or noise or other unexpected
Do not drop the chair, as internal and external
trouble. parts may get damaged. Right position: Your back
clings to the chair back, your
Don’t use the castor if the floor is wood or
Check places in front head clings to the pillow.
other easy damaged material.
Check the areas where the back and leg At least 12” in front of the legrest. The remote control
are extending. Make sure no people, pets or gives a "beep" sound after
Check surroundings Make sure the power is off and the plug
other things are around. body scan is
Massage operation

Massage operation
When the backrest or legrest reclines or doesn't touch the floor(It’s better to finished. When micro-adjustment is
extends, please pay attention to: let the chair in standing needed, just press up/down key on the
status to avoid theback remote control.

(1) Check any person or things in every crashing the floor) Make sure the body scan is finished
correctly for the best massage.
direction.
(2) Check the space size.
Normally
Suggestion

1 Lift up the legrest to make the gravity fall on

the castor. Then push chair to destination When you feel the
Check power cable, plug
and set it down. intensity isn’t strong
(1) Clean and dust from the plug.
enough,take off the
(using dry cloth).
pillow or cushion.
(2) Make sure there is no damage to the
power cable.

Because the chair is heavy, it may.

mark floor.
Check
Please put a blanket or
other protection down
to insure the floor is
not damaged.

▲ Please hold the footrest to move the

chair as shown and be careful not to
scratch leatherette.
15 Manual control Manual control 16

手控器使用方法
Manual control
1. Switch on, press on/off key to enter POWER ON status. Press Menu or other
On/Off buttons to select any auto or manual program, massage machine will start the
body scanning and then do the massage. In ON status, press on/off key to power
off and get the chair back to upright position. Remote control will turn off in 3 to 5
seconds.

Hot 2. In ON status, press this key to enter HOT ROCKS program. Its default time is 5mins,
Speed 20 min Rocks click this button again, it will increase the time increment by 5mins, and the maximum
Width will not exceed 30mins. In HOT ROCKS mode, massage machine heat is turned on
Intensity and it will put on the max heat.
3D：
Air 3. In ON status, press this key to adjust the air intensity either in auto mode or air
Intensity
massage program.

4. Press this button in Main interface to switch to menu interface, user can set
Menu different functions for the massage chair. Press it in Menu interface to return
to main interface.

5. In ON status, press this key to activate different auto modes. Six common auto
Auto
modes and six special auto modes for your choice, Recovery, Relief, Stretch,
Music Sync, Renew, Calming, Refresh, Energy, Revive, Active, Relax and Healing.
Massage operation

Massage operation
Set function by pressing Menu key.
Relative screen display is shown on the controller.

6. There are four direction buttons, Up, Down, Left and Right. In Menu interface, it’s
3D- 3D+
a navigator button, user can press Up or Down to choose menu fast, and press Left
On/Off Hot Air and Right to enter previous or next menu. Besides, Up and Down button can be
On/Off Intensity Air intensity
Rocks used to adjust the massage position in body detecting and point massage. In auto
Hot rocks and manual mode, Left and Right button can be used to adjust 3D intensity.

Menu Menu Auto Auto OK 7. In ON status and under Menu mode, press it to confirm menu choice and enter next
menu.
Up
Confirm button 8. Keep pressing this button, legrest goes up, release it, the legrest will stop moving.
Controller screen will show position adjusting… when adjusting the position
Left Right
3D-
3D- OK 3D+
3D+
of the massage chair.

9. Keep pressing this button, backrest goes up, legrest goes down, release it,
Down backrest and legrest stop moving. Controller screen will show position
adjusting… when adjusting the position of the massage chair.
legrest up backrest up& 10. Keep pressing this button, legrest goes down, release it, the legrest will stop
Legrest down moving. Controller screen will show position adjusting… when adjusting
the position of the massage chair.
legrest down Legrest up& 11. Keep pressing this button,the backrest will go down,the legrest go up,release
Zero backrest down
this button,the backrest and legrest will stop moving.When adjusting sitting
Zero-Gravity position, it shows seat position adjusting… in controller screen.

12. In ON status, press this key, chair will go to zero-gravity position. Press it again
Zero to enter sleep mode. Press it once again to return to upright position. It will move
like that in circles.
17 Manual control Manual control 18

LCD display graphic description LCD display graphic description

Main interface Press“on/off”button when power is on,a buzzer beeps once short and Airbag : After press MENU button,choose“air pressure”
Menu Full Body
brittle. LCD screen displays boot screen,after 2-3 seconds it displays through navigation key,Press“OK”button ，there are
Upper Body
the main interface and enters standby mode.Main interface shows Auto Position two kinds of air pressure related function: Position and
Waist & Seat
Speed 20 min massage position,method,time,heating current massage status etc., Manual Intensity
Level 1 Intensity;Choose the corresponding function, then press
Width all information will be updated timely when the chair is working. Level 2
Legs & Feet
“OK”to enter next menu and choose required function.
Intensity Airbag OFF
Level 3
3D： Roller
Level 4
Roller:press"menu"button,select Menu
Massage position foot roller massage by the navigation
Kneading Heating
key,press the "OK" button, Press
Massage function
Level 5 Auto Quick

Tapping Timer “OK” button, choose rolling massage Manual Soft

Settings
mode.
Knocking Massage speed （Level 1, 2, 3, 4, 5） Airbag Stop
Note:
Pressing Massage width (narrow, mid, wide) Stop
1. During all the auto massage, the default Roller

Air intensity（Level 1, 2, 3, 4, 5） setting for foot roller is on, you can press Heating
Zero Zero gravity Select by the navigation keys stop under Roller to turn it off.
Set function by pressing Menu key. 3D（Level 1, 2, 3, 4, 5, 6）
2. Under Airbag, when select Full Body or Timer
Massage Armrest LED light Status Legs& Feet, foot roller is on, press Stop Settings
time left under Roller to turn it off.
Heat Status Temperature Level of 3. When select Upper Body or Waist & Stop
Menu Seat under Airbag, the foot roller is off,
Display Massage Machine Heat
(Level 1, 2, 3, 4, 5, 6, 7) press Quick or Soft to turn it on. Select by the navigation keys
Auto Back ON
Massage operation

Massage operation
Manual Waist ON
Press the "menu" button in the main interface,it will switch to the menu Heating: Press Menu and select
Menu interface Airbag Foot ON
interface, user can set all massage function. Press the "menu" button Heat by navigation key. User can
Menu Roller TEMP+ choose heat on or off. After heat
in the menu interface will exit and return to the main menu interface.
Auto Recover Heating TEMP- is on, the heat symbol in the main Menu

Manual Relief Auto Mode: Press Menu to select auto mode by pressing OK. interface will light up. Auto 1 0 min
Timer

Airbag Stretch
The special auto mode includes six special ones, Refresh, Manual
2 0 min
Settings

Music Sync
Energy, Revive, Active, Relax and Healing. Timer: press "menu" key, through 3 0 min
Airbag
Roller Stop the navigation key to select menu 45min
Heating
Renew
Refresh
item timing ,can choose massage Roller

Calming Select by the navigation keys time:30 minutes,20 minutes,

Timer Energy Heating
Menu
10 minutes,the default time is 20
Special
Settings Revive minutes,the chair will turn off Timer
Auto Mode Kneading automat ically after time is up.
Stop Active Settings
Tapping
Manual Position Whole
Relax Menu English Settings: Press Menu, then Stop
Knocking
Select by the navigation keys Airbag Width Narrow Partial
Healing
Foint Knead&Tap Auto Language
简体中文 set the language and LED
Level 1 Select by the navigation keys
Roller Speed Middle
Pulse Shiatsu
한국어 light by the navigator
Manual LED Lights
Heating 3D 3D+
Level 2 Wide
Shiatsu
Tiếng Việt buttons.
Manual Mode: Press Menu to select 3D- Level 3 Airbag Español
Stop: press“menu”key,select
Timer Footrest Back Rubbing
manual mode by pressing OK. It has six Out Level 4 Roller ON stop through the navigation key,
Finger Knead
function settings including Mode, Position, Settings
In it will stop massage, and go back Auto-Recover
Level 5 Heating OFF
Width, Speed, 3D and Footrest. Select Stop to main interface. Speed 20 min
one function, then press OK to enter next Timer
Width
menu, select the desired massage mode Select by the navigation keys Settings Intensity
and position, adjust the width and speed. After Power is on, the first time to use auto 3D：
Stop program,the massage chair will start body
When massage chair in manual fixed point work modes, users can use up/down button detecting, and “body scanning…” will be
to adjust massage position,information for“massage position adjusting…”will show Select by the navigation keys shown on screen display. After body
at the bottom of the display screen. scanning finishes,a buzzer will tick 5 times
Partial: Massage machine will center on the current position and move up and down in circles (once every second), meanwhile, the
within certain limits. massage machine is located in shoulders position, if the user thinks the
1. When select the massage mode, the default position is whole, just do only one time body scan.
position is not proper, press Up and Down to adjust, when adjusting,
2. Partial and Point massage doesn’t need body scan. In other words, if during the body scan or before the “shoulder height adjusting…” is showing on screen display.
body scan completes, select Partial or Point will stop the body scan and directly enter the corresponding Default working time is 20 minutes. ( Massage chair will turn off and Set function by pressing Menu key.
function, if you switch back to whole or select other mode at this time, body scan will be activated once again. return after the massage is over)
19 Operation instruction and function illustration Operation instruction and function illustration 20

ON/OFF Function Illustration

Power switch Legrest Up Zero gravity
Press this button on controller, Press the remote control
On/Off legrest goes up.Release the button ,the back goes
button,legrest stops moving, down,the legrest goes up.
the angle is locked in this The chair then goes into
4 Zero gravity .Press the
position.
button again to
a reset the chair
3 back from Zero
gravity.

Step1. Power on Tips: Zero-gravity

Legrest Down is based on the
1 ① Put one end plug of power line to hole “a”. Press this button on controller, NASA Space
② Put power plug into socket. legrest goes down.Release capsule relaxation
③ Turn on the power switch which is on the the button,legrest stops theory. Using the
moving, the angle is back ,seat, and
power box, massage chair is on.
locked in this position.
legrest the chair can
④ Press "ON/OFF" on the controller, beep
make the angle
tone will sound, the display will show
Massage operation

Massage operation
2 128 degrees between Body and legrest.
Logo information, then enter the display
This puts the heart and knee at
interface.
the same level, reducing the blood circulation
pressure.,Not only that, but all the
Step2. Massage Speed
Width
20 min
Legrest up and backrest down
Intensity
3D：
gravitational forces can be dispersed
① Operate according to controller operation Press this button on controller,
to the massage chair, reducing heart and
backrest go down and legrest
instruction. Set function by pressing Menu key.

spine pressure. This makes the Zero gravity

On/Off
Hot Air
Intensity
go up.Release this button,
position the most relaxing position possible.
Rocks

② When the massage stops, massage machine Menu Auto

backrest and legrest stop
returns to the default position, meanwhile
3D- OK 3D+
moving,the angle is
locked in this position.
“Shutting down” is displayed on the controller, Zero

Controller turns off after 3-5 seconds.

Step3. Turn off the power

On/Off Backrest up and Legrest down
①When the chair is On, press On/Off button
to turn off the massage chair and it will Press this button on controller,
1
restore automatically. backrest go up and legrest go
②Turn off the power switch on the bottom of down. Release this button,
backrest and legrest stop
the back of chair after the rollers stay at
moving,the angle is
storage position.
locked in this position.
3 2 ③Unplug the power plug from the socket.

1. Before using, pull up the pillow, 1.Before sitting down, make sure there
back cushion etc. to check if the is no things pinched between armrest,
PU material is broken, if there is legrest , backrest and seat of the
chair. 1. Please make sure there are no people, no pets or anything else within range of the backrest to avoid
damage, please stop using, unexpected injury or property loss.
2.Make sure the chair is in returned
unplug the chair, and call for 2. When adjusting the backrest, be careful of the gap between the backrest and armrest.
Warning Attention position before using.
repair. 3. When the legrest is moving, please do not stand on or leave from the seat, do not stop the legrest from moving
3.Do not stand on it when using the
2.Only plug in to proper socket. or you can cause damage to the chair.
massage chair. 4. Please refer to control instruction for more details.
21 Operation instruction and function illustration After massage 22

Function Illustration Restoration of massage chair

Legrest extend and retract New Curved rail. Unique back 1 Make sure there is no people or pets or anything 5 Switch off the power.
Legrest can extend and retract within 8” and buttocks massage. within the range of backrest and legrest.
automatically. Massage chair adopts 3D curved rail
technology, combining with 3D massage
mechanism patent, realizing multi-angle
integrated massage for back and buttocks. 5
It has all the benefits of traditional L
shape rail function, as well as
adding in the ability to
lay down flat and fully
Arm massage stretch the body.
This Massage chair uses space 2 Make backrest and legrest restore to the
capsule type armrests, with normal position by controller.(or press
built-in pulse air pressure ON/Off key to make backrest and legrest
massage functions. Put the restore to the normal position)
arms between armrest's
air bags. After filling with 6 Unplug the electricity from the socket.
Music therapy
air, kneading massage On/Off
begins on the arms and There are multiple speakers around Or
Massage operation

Massage operation
hands. your head. The blue-tooth wireless
music player function integrates music
into the massage techniques to realize
a music sync relaxing therapy and
effectively adjust the mood and
Shoulder massage
ease fatigue.
Multi-layer extrusion type
air bags on both sides of
the shoulder, realize
stretch function. The 3D
massage machine 7 Clean the chair if necessary.
pushes your body while
air pressure holds on to
your shoulders, allowing
for body stretch function.
3 Adjust the back cushion and pillow to the
original position.
Speed 20 min

Warm foot therapy

Width
Intensity
3D：

Attention!
Unique to this chair, Set function by pressing Menu key.

two-way rotary foot

Hot Air
On/Off Intensity
Rocks

Menu Auto

kneading technique, 3D- OK 3D+

realizing the sole Zero

After using, press ON/OFF to end all the

function of kneading massage method and wait for restoration.
foot, combining with
foot heating. It can Make sure to cut the electricity to avoid any
perform the best foot unexpected hurt to children or pets.
massage experience.
After using, turn off the power, unplug the
electricity.
1. Please make sure there is no people, no pets or any things within range for backrest to avoid unexpected damage
or property loss. 4 After chair returns to the upright position,
2. When adjusting the backrest, be careful of the gap between the backrest and armrest.
3. When the legrest is moving, please do not stand on or leave from the seat, do not stop the legrest from moving
put the remote control back in the pocket.
in case of causing damage to the chair.
4. Please refer to control instruction for more details.
23 Cleaning and Maintenance Malfunction guide 24

合成皮革leather
Synthetic 塑胶区域
Plastic parts FAQ and Troubleshooting
常见现象处理
General cleaning
●
1 Dip cloth into neutral detergent, Trouble Possible reason Troubleshooting
Clean with tidy, soft and dry cloth.
squeeze it and clean. Check if the control is on or not. Open control switch
●
2 Wipe with water-dipped but
Not choose massage function Choose massage function
squeezed cloth.
(Chemical or medical Check whether the plug and socket
Make sure plug and socket are connected.
cleaning products are ●
3 Allow to dry. The massage chair won’t
are in poor contact.
forbidden) work after power is on. Please ask manufacturer or appointed
Wire or plug is damaged. or authorized maintenance man for
checking and replacement.
The fuse burned out. Replace fuse of same specification.
Please ask appointed or authorized

If Synthetic leather is dirty

Clean the controller Something wrong with inner circuit maintenance man for checking and
repairing.
There is beep sound inside It is sound of air pump, motor and Normal sound, no need to pay
●
1 Dip soft cloth into 3-5% neutral detergent the massager while working. mechanical parts. attention to it.
solution, squeeze it then clean the stain on ●
1 Wipe with soft cloth after squeezing.
Different height of the left Massage rollers work on shifts. Normal, no need to pay attention to it.
the surface gently. roller and right roller.
●
2 Wash cloth, squeeze it and wipe with
Turn off the power to have the
detergent. ●
2 Allow to dry.
Check if it is due to long time working. massager rest for over half an
Propellant, diluent or Sound suddenly becomes hour before next turn working.
●
1
Maintenance

much louder while working.

Others
●
3 alcohol are prohibited. Please ask appointed or authorized
Inner parts worn out from long use.
maintenance man for checking and
●
4
●
1 ●
2 ●
3 Speed
Width
Intensity
3D：
20 min
repairing.
Sudden power-loss Connect the electricity power again
●
3 Clean it softly with dry cloth. Set function by pressing Menu key.
Massage function suddenly
Turn off the power to have the
●
4 Allow to dry (do not blow dry)
On/Off

Menu
Hot
Rocks
Air
Intensity

Auto
stops while working. Setting time is up. massager rest for over half an
3D- OK 3D+
hour before next turn working.
Check if there are any obstacles; the Remove the obstacles; turn off
Zero

Neither the backrest nor the chair has safety functions that will the power to have the massager
legrest can move. shut it down if there is an object rest for over half an hour before
Fabric material blocking normal function next turn working.

The chair can't return to its Please ask manufacturer or appointed

Excessive operation; setting time is up. or authorized maintenance man for
●
1 Dip cloth into weak neutral original position.
checking and replacement.
detergent, squeeze it and clean
Turn off the power to have the
the material surface. It may have overload massager rest for over half an
(Diluent, gas, alcohol About cleaning Electric wire or plug hour before next round working.
●
1
hot.
are prohibited) Before cleaning, unplug the electricity, Ask or appointed or authorized
Other abnormal case
Brush the dirty parts maintenance man for help.
don't touch plug with wet hands.
with weak neutral detergent. ●
2
(avoid excessive brushing) Make sure hands are dry when plugging
●
2 Excessive cleaning may cause to the socket.
damage to cloth material. Failure to follow these instructions may
●
3
●
3 Wipe with water-dipped but
cause user to experience electric shock.
squeezed cloth.
● Allow to dry.
4 Note: If the troubles are not caused by above reasons, please turn off the power switch and
cut off the power, then contact the manufacturer or service agent to repair your chair.
25 Technical data
Technical data

Name Power 280W

Main body :253/302 lbs

Model Presidential
NW/GW Armrest :32/43 lbs
□AC120V，60Hz Legrest &footrest : 66/76 lbs
Input voltage □AC220V，50/60Hz
Main body:59.8×31×38 ”
□AC240V，50Hz
Packing size Armrest : 38.5×15.5×28 ”
Safety design ClassⅠ Legrest &footrest :23 × 20 × 24 ”
（L×W×H)
Others