Scribd
Upload
1K views1 page

Product Sheet IR 2011: Intended Use

The IR 2011 is an optoelectronic edge sensor used for contact-free optical scanning of web edges in conjunction with BST eltromat controllers. It has an operating range of 16mm (±8mm) in analog mode and 24mm (±12mm) in digital mode. The sensor can be mounted with an optional sensor mount and has connections for power, analog or digital signal output, and an optional blowing device to protect the lens from contamination.

Uploaded by

Marcelo Silva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

Product Sheet IR 2011: Intended Use

The IR 2011 is an optoelectronic edge sensor used for contact-free optical scanning of web edges in conjunction with BST eltromat controllers. It has an operating range of 16mm (±8mm) in analog mode and 24mm (±12mm) in digital mode. The sensor can be mounted with an optional sensor mount and has connections for power, analog or digital signal output, and an optional blowing device to protect the lens from contamination.

Uploaded by

Marcelo Silva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

// Product Sheet IR 2011

Dimensional Drawing Spatial Illustration

Intended Use
The IR 2011 is an optoelectronic edge
sensor. It is solely used in conjunction
with BST eltromat controllers for
contact-free optical scanning of web
edges.
Note: For commissioning and opera-
tion, please refer to the separate docu-
mentation.

Mounting
The sensor can be mounted with an
Working Principle and Characteristics optional sensor mount available at BST
eltromat.
 Optoelectronic edge sensor (insensitive to external light sources)
 No influence on the measurements by flutter of the material within the sensor measuring range
Electrical Connection
 Optional connection for air sweep protects the lens against contamination from paper dust or
abraded particles
 Selectable operating modes: Analog (output signal 0-10 V); Digital (via integrated CAN-Bus)
 Operation display: LED (2 colors)
 Field of application: transparent and non-transparent materials, thick materials

General Data Plug viewed from sensor

Sensor IR 2011/40 IR 2011/70 Pin Analog Mode Digital Mode


Fork Width 40 mm 70 mm 1 +12 … 30 VDC +12 … 30 VDC
Measuring Range (Analog Mode) 16 mm (± 8 mm) 16 mm (± 8 mm) 2 Analog signal CAN-H
Measuring Range (Digital Mode) 24 mm (± 12 mm) 20 mm (± 10 mm) 0 … 10 V
Light Emitter Wave Length 630 nm 3 0V 0V
4 0V CAN-L
Electrical Data
Supply Voltage 12 … 30 VDC Order Data
Power Consumption 20 mA (24 VDC) Sensor Part No.
Output Signal (Analog Mode) 0 … 10 V IR 2011/40 3SEOP156765
Output Signal (Digital Mode) BST-eltromat CAN-Bus IR 2011/70 3SEOP164183
Polarity Reversal Protection (Supply) Yes
Connecting Cable Part No.
Short Circuit Protection (Analog Output) Yes
Analog: 3 m 2ELKB133456
Electrical Connection M8 plug, 4-pin
Analog: 5 m 2ELKB133457
PDB.025.EN.07/04.05.2016 | Subject to change

Mechanical Data Analog: 10 m 2ELKB128967


Digital: 2 m 1ELKB131993
Weight < 400 g < 500 g
Digital: 5 m 1ELKB131994

Operating Conditions Digital: 10 m 1ELKB131995

Ambient Temperature In Operation 0 … +60 °C Accessories Part No.


In Storage -10 … +70 °C Blowing Device 3BGSO162310
Protection Class IP 54
Noise Emission < 70 dB
RoHS Yes

BST eltromat International GmbH  Heidsieker Heide 53  D-33739 Bielefeld  Tel. +49 (0) 5206 999-0  Fax +49 (0) 5206 999-999  www.bst-eltromat.com Page: 1/1

You might also like