Scribd
Upload
50 views7 pages

University of California College of Engineering Department of Electrical Engineering and Computer Sciences

1) The document is a midterm exam for an electrical engineering course. It contains 3 problems testing knowledge of noise, termination, and current mirrors. 2) Problem 1 asks the student to calculate the total voltage noise variance at the output of an amplifier circuit. Problem 2 has 3 parts examining noise and signal-to-noise ratio in different termination and amplification circuits. Problem 3 has 2 parts about noise currents in a current mirror and error in a current mirror due to source resistance. 3) The exam tests essential concepts in electrical engineering including noise, termination, amplification, and current mirror design. Students are instructed to show their work and partial credit will be given. They are provided constants to assume in calculations.

Uploaded by

Bob
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
50 views7 pages

University of California College of Engineering Department of Electrical Engineering and Computer Sciences

1) The document is a midterm exam for an electrical engineering course. It contains 3 problems testing knowledge of noise, termination, and current mirrors. 2) Problem 1 asks the student to calculate the total voltage noise variance at the output of an amplifier circuit. Problem 2 has 3 parts examining noise and signal-to-noise ratio in different termination and amplification circuits. Problem 3 has 2 parts about noise currents in a current mirror and error in a current mirror due to source resistance. 3) The exam tests essential concepts in electrical engineering including noise, termination, amplification, and current mirror design. Students are instructed to show their work and partial credit will be given. They are provided constants to assume in calculations.

Uploaded by

Bob
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

UNIVERSITY OF CALIFORNIA

College of Engineering
Department of Electrical Engineering and Computer Sciences

E. Alon Midterm EECS 240


Thursday, March 11, 2010 SPRING 2010

You should write your results on the exam sheets only. Partial credit will be given only if
you show your work and reasoning clearly.

Throughout the exam, you can ignore flicker noise, assume that the ro of the transistors is
infinite, and ignore all capacitors except those drawn in the circuit unless the problem
states otherwise.

Name: _________________________________________

SID: _________________________________________

Problem 1 ______/ 10

Problem 2 ______/ 18

Problem 3 ______/ 9

Total ______/ 37

1
Problem 1 (10 points) Noise

What is the total voltage noise variance von2 at the output of the amplifier shown above?
You should provide your final answer in terms of k, T, γ, RL, Ls, CL, and Av0 = gmRL.

2
Problem 2 (18 points) Termination and Noise

As we will see later on in class, in many applications we have to design our amplifiers
such that they provide an input termination resistance that is equal to the resistance of the
source (e.g., in order to avoid reflections). In this problem we will examine a few options
for implementing the amplifier and the termination resistor.

a) (4 pts) For the circuit shown below, what is the noise voltage density (von2/Δf) at
the output if you assume that the source resistance Rs is noiseless (i.e., noise is
only contributed by Rin)? Under this same condition and assuming that Vin is a
sinusoid with amplitude of Ain, what is the SNR of Vout? You should provide
your answers in terms of k, T, Rs, Δf , and Ain.

3
b) (6 pts) Your colleague Ace says he thinks he can do better with an active circuit
to create the termination and amplify the signal. Assuming that Rs and RL are
noiseless and that 1/gm1 = Rs (i.e., the transistor provides the termination
resistance) and still with an input sinusoid whose amplitude is Ain, now what is
the SNR at Vout? You can assume that γ = 1, and you should provide your
answers in terms of k, T, Rs, Δf , and Ain.

RL
Vout
Vb M1
Rs

Vin Ib

4
c) (8 pts) Your other colleague Pat suggests she can achieve better noise
performance with the circuit shown below. Ignoring all noise sources except for
the noise from M1 and assuming that gm2RL = gm3Rs and that 1/gm1 = Rs, what is
the noise voltage density at Vout? What is the small signal gain of the circuit from
Vin to Vout? You should provide your answers in terms of k, T, Rs, RL, RL2, gm3,
and Δf.

5
Problem 3 (9 points) Current Mirror Issues

d) (4 pts) For the circuit shown above, what is the total noise current flowing into R
(ion2) due to the noise current of device M1? You can ignore all capacitors except
for the Cgs of the PMOS transistors, and you should provide your answer in terms
of k, T, γ, gm1, Cgs1, and M.

6
Rs
M1 M2
1 M

Iout

Ib

e) (5 pts) Now let’s look at why we want to route currents instead of voltages in our
mirrors. For the circuit shown above, approximately what is the error in output
current (Iout) due to Rs? You should provide your answer as a function of V1*, M,
Ib, and Rs.

You might also like