Scribd Logo
Upload

Welcome to Scribd!

  • 36 views

    Pilot II: Technical Data Sheet Application Guide

    Uploaded by

    TamerTamer
    This technical data sheet provides product details and application guidelines for Pilot II, a one-component, oxidatively drying alkyd coating intended for use as a topcoat in atmospheric environments. The document outlines surface preparation procedures for new, coated, and aged surfaces to remove contamination and prepare a sound substrate. It also describes acceptable previously applied coatings of organic primers or intermediates and states that the surface must be free of contamination prior to applying additional coats.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Pilot II: Technical Data Sheet Application Guide

    Uploaded by

    TamerTamer
    36 views1 page
    This technical data sheet provides product details and application guidelines for Pilot II, a one-component, oxidatively drying alkyd coating intended for use as a topcoat in atmospheric environments. The document outlines surface preparation procedures for new, coated, and aged surfaces to remove contamination and prepare a sound substrate. It also describes acceptable previously applied coatings of organic primers or intermediates and states that the surface must be free of contamination prior to applying additional coats.

    Original Title

    yyy_Part1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This technical data sheet provides product details and application guidelines for Pilot II, a one-component, oxidatively drying alkyd coating intended for use as a topcoat in atmospheric environments. The document outlines surface preparation procedures for new, coated, and aged surfaces to remove contamination and prepare a sound substrate. It also describes acceptable previously applied coatings of organic primers or intermediates and states that the surface must be free of contamination prior to applying additional coats.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    36 views1 page

    Pilot II: Technical Data Sheet Application Guide

    Uploaded by

    TamerTamer
    This technical data sheet provides product details and application guidelines for Pilot II, a one-component, oxidatively drying alkyd coating intended for use as a topcoat in atmospheric environments. The document outlines surface preparation procedures for new, coated, and aged surfaces to remove contamination and prepare a sound substrate. It also describes acceptable previously applied coatings of organic primers or intermediates and states that the surface must be free of contamination prior to applying additional coats.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Technical Data Sheet

    Application Guide

    Approved 635 1,2 635 alkyd ^(ValidationDate) 1

    Pilot II

    Product description
    This is a one component oxidatively drying alkyd coating. It has a glossy finish with good gloss retention. To be
    used as topcoat in atmospheric environments.

    Scope
    The Application Guide offers product details and recommended practices for the use of the product.

    The data and information provided are not definite requirements. They are guidelines to assist with efficient and
    safe use, and optimum service of the product. Adherence to the guidelines does not relieve the applicator of
    responsibility for ensuring that the work meets specification requirements.
    Jotuns liability is in accordance with general product liability rules.
    The Application Guide (AG) must be read in conjunction with the relevant specification, Technical Data Sheet
    (TDS) and Safety Data Sheet (SDS) for all the products used as part of the coating system.

    Referred standards
    Reference is generally made to ISO Standards. When using standards from other regions it is recommended to
    reference only one corresponding standard for the substrate being treated.

    Surface preparation
    The required quality of surface preparation can vary depending on the area of use, expected durability and if
    applicable, project specification.

    When preparing new surfaces, maintaining already coated surfaces or aged coatings it is necessary to remove all
    contamination that can interfere with coating adhesion, and prepare a sound substrate for the subsequent
    product.
    Inspect the surface for hydrocarbon and other contamination and if present, remove with an alkaline detergent.
    Agitate the surface to activate the cleaner and before it dries, wash the treated area using fresh water.
    Paint solvents (thinners) shall not be used for general degreasing or preparation of the surface for painting due
    to the risk of spreading dissolved hydrocarbon contamination. Paint thinners can be used to treat small localized
    areas of contamination such as marks from marker pens. Use clean, white cotton cloths that are turned and
    replaced often. Do not bundle used solvent saturated cloths. Place used cloths into water.

    Coated surfaces

    Organic primers/intermediates

    Primers/ intermediates based on alkyd or epoxy are accepted.


    The surface of previous coats shall be free from contamination by water, hydrocarbon based products, wax, mud,
    mortar droppings and loose, chalked and flaking coating.
    Inspect the surface for oil, grease and other contamination and if present, remove with an alkaline detergent.
    Agitate the surface to activate the detergent and before it dries, wash the treated area using plenty of fresh
    water.
    When applied on coatings past maximum over coating interval light abrading may be required to achieve proper
    intercoat adhesion.

    Date of issue: 6 August 2020 Page: 1/7

    This Application Guide supersedes those previously issued.


    The Application Guide (AG) must be read in conjunction with the relevant specification, Technical Data Sheet (TDS) and Safety
    Data Sheet (SDS) for all the products used as part of the coating system.
    For your nearest local Jotun office, please visit our website at www.jotun.com.

    You might also like