FLEXO

vs.
OTHER PRINTING
METHODS

Web: www.luminite.com
Phone: 888-545-2270
As the printing industry moves forward into 2020 and beyond, let’s take a fresh look at the
technology available, how flexo has changed to meet consumer demand, and how 5 other
popular printing methods compare.

CONTENTS
● A History of Flexo Printing
● How Flexo Printing Works
● How Litho Printing Works
● How Digital Printing Works
● How Gravure Printing Works
● How Offset Printing Works
● What is Screen Printing?
● Corrugated Printing Considerations
● Flexo Hybrid Presses
● Ready to Get Started with Flexo?

2
A History of Flexo Printing
The basic process of flexography dates back to the late 19th century. It was not nearly as refined,
precise, or versatile as the flexo process today -- and can be best described as a high-tech method
of rubber stamping. Printing capabilities were limited to very basic materials and designs, with
other printing methods greatly outshining flexo.

Over the past few decades flexo technology has continuously evolved. This is largely thanks to the
integration of Direct Laser Engraving technology, advancements in image carrier materials, and in
press technologies. These innovations, among others, have led to increased quality and precision
in flexo products.

These technological improvements have positioned flexography at the helm of consumer product
and flexible packaging printing. Flexo is growing in popularity in a variety of other industries, too,
including medical and pharmaceutical; school, home, and office products; and even publishing.

How Flexo Printing Works

Flexo typically utilizes an elastomer or polymer image
carrier such as sleeves, cylinders, and plates. The
image carrier is engraved or imaged to create the
design for the final desired product. Ink is transferred
from the ink pan via an anilox roll onto the image
carrier, where it is then printed onto the substrate.

Flexo printing is most commonly associated with uses

in flexible packaging and labels, utilizing a variety of
substrates including film, paper, foil and non-woven.
Producing these products generally takes 3 steps:

1. Artwork
The first step in flexographic printing is designing your artwork. Creating a design that fits the specifications
needed to produce the final desired print can be challenging. Failure to thoroughly proof your artwork can result in
costly mistakes. Image carriers cannot be changed once they are produced. When mounted to a printing cylinder,
image carriers created flat stretch and distort your image. You can learn how to calculate and compensate for the
distortion -- or opt for In-The-Round, continuous print image carriers that are distortion free.

2. Web-Fed Substrate Materials

The rolling design of the flexographic printing press allows for continuous substrate materials (in roll-form) to be
fed through the machine. This feature of flexography is what allows for the continuous printing process that can
achieve high speeds, maintain accuracy, and efficiently produce large print runs.

3
3. The Flexographic Printing Press

● Unwind and Infeed - A roll of substrate is fed into the printing press. Tension must be kept taught
to prevent slack which can cause wrinkling, misregistration, web breaks, and other print defects.

● Enclosed Doctor Blade Inking System - A continuous cycling pump fills the enclosed chamber
with ink. The ink is transferred onto the anilox roll with any excess removed by the doctor blade.
The ink cycles in and out of the enclosed system during printing.

● Inking Anilox Roller - The anilox roller contains microscopic cells which carry a thin layer of ink
from the inking system to the image carrier.

● Image Carrier and Impression Cylinder - The image carrier transfers the image to the substrate.
The flexographic press pulls the substrate between the image carrier and the impression
cylinder. Simultaneously, the impression cylinder holds exactly the right amount of pressure on
the substrate for even ink distribution.

● Drying - The substrate winds through roller-less and plate-less sections to dry the ink. Depending
on the number of colors used, the substrate might pass through multiple image carriers,
impression cylinders, and drying sections in a single print run (one per color).

● Outfeed and Rewind - The final step on a flexographic printing press is the outfeed and rewind,
where a substrate is rolled up again in preparation for a cutting die, which will separate individual
prints.

4
How Litho Printing Works
Litho printing is an offset process which uses a printing plate. The ink is first applied onto the
printing plate and then transferred to a rubber blanket through multiple ink rolls, and finally applied
to the substrate from the blanket. This means the image is not printed directly onto the substrate
from the plate.

What is the Difference Between Flexo & Litho Printing?

Both flexo and litho printing can produce reliable prints in very high volumes. They can be used to produce
quality product packaging, labels, and a wide variety of printed paper materials. While lithographic printing
might dominate some markets, flexo printing has increasingly gained popularity since the 1970s with the
introduction of direct laser engraving.

COST:
Litho can accommodate foil stamping, spot gloss, embossing, and other embellishments, but these options
also come at a higher cost.

Additionally, since the only way to print with litho is through an indirect pre-print, this guarantees an
additional step in production and thusly raises costs. Both processes can be very cost-effective when
printing large runs with basic needs.

With proper maintenance and storage, as well as an investment in durable image carrier materials, flexo
image carriers can be reused many times before they need to be replaced.

SUBSTRATES:
Litho is generally limited to printing on smooth, flat surfaces as the image must be pressed onto the
substrate. Printing on corrugated substrates requires an additional step in production where the images are
first printed onto linerboard, which is then attached to the corrugated substrate.

Flexo can print on both porous and non-porous surfaces, making it ideal for a wider variety of substrates,
including coated linerboard and paper.

INKS:
Litho generally uses oil-based inks, and printing usually consists of the four process colors, each requiring a
dedicated printing station.

Flexo also utilizes one image carrier per color and can use oil-based inks; it additionally accommodates
printing with a wide variety of other inks -- including water-based, solvent-based, and UV inks. Curable inks,
such as UV, afford faster drying times. Faster drying can lead to faster production runs.

IMAGE QUALITY:
Flexo is noted for producing superior print with fine line and text detail.

Making the final decision whether to print using the flexo or litho process depends on the substrate, budget
considerations, and a number of other production requirements.

5
How Digital Printing Works
Digital printing presses function similarly to
the printers we use at home. Unlike the other
printing methods, digital printing does not
require the creation of printing plates
because a digital press uses electronic files
to print images.

Digital printing is capable of rendering high

resolution images. This method costs more
per print than the other methods and moves
more slowly, but without the need for
printing plates, set up is less expensive.

This makes digital printing a great option for small volume printing, samples, or test marketing.

What is the Difference Between Flexo & Digital Printing?

COST:
Flexo is a more cost effective option than digital for high-speed and high-volume printing needs. Being a
continuous printing solution, there is little to no press downtime.

However, for short runs, digital printing is considered more cost effective due to the comparatively minimal
initial investment in materials and quick set-up time.

INKS/SPEED:
Due to the fast-drying inks that are compatible with flexo printing image carriers and presses, flexo is a
great option for applications where speed is of utmost importance.

QUALITY:
For some industries, digitally printed final products may be less durable than ones printed with flexography.

This is a particular consideration when printing products intended for outdoor use, or needed to withstand
many years of display.

6
How Gravure Printing Works
Gravure printing works by applying ink to a
substrate with the use of a metal plate that
is typically mounted onto a cylinder. This
plate is often made of copper or chrome.

The image or text that is intended for

printing is typically laser etched into said
metal plate, a process that often delivers
high quality and precise results with good
repeatability.

What is the Difference Between Flexo & Gravure Printing?

COST AND LEAD TIME:
Gravure image carriers are typically much more expensive than Flexo, making the number of prints required
to break even much higher. Gravure, however, has a longer press run time as the cylinders do not require as
frequent changing as Flexo. Gravure lead time is usually 3-4 times that of Flexo in the time it takes to
manufacture the image carrier.

SUBSTRATES:
One of the limitations of gravure printing is that it generally better suited for porous substrates. This is one
of the reasons that gravure is best suited for high detail printing on applications such as magazine covers.
That isn’t the case with flexo printing, which is able to print on both porous and non-porous substrates,
making the technology ideal for everything from film to paperboard.

INKS:
Another key differentiator is the range of inks Flexo is able to print with. Gravure is more limited in the inks
that it works with, often making Flexo the superior choice due to the ease of printing with a wider variety of
inks. Gravure requires much more ink per print, which can drive up the cost of printing.

ENVIRONMENTAL CONSIDERATIONS:
Due to the fact that Gravure is traditionally associated with solvent based inks, although water based ink
capabilities have been evolving, Flexo is commonly considered the “greener” options.

Flexo generally has more options for VOC considerations, and the press operations are associated with
more environmentally friendly practices.

QUALITY:
Gravure was once considered best for fine detail and tonal work, but Flexo technology is further enabling
prints with higher resolution and detail as it evolves -- enabling it to move into print jobs that were previously
associated exclusively with Gravure.

7
How Offset Printing Works
Similar to flexo, Offset also uses a plate, but
it works in a different manner than flexo.
Offset plates are usually made of metal, and
the printing ink is transferred via the plate to
a rubber piece of material (often this is
called a "blanket") and then to the printing
surface.

Offset is most commonly used to print on

paper (think: newspapers and magazines),
as a flat and smooth surface is required for
printing.

What is the Difference Between Flexo & Offset Printing?

INKS:
Flexo is able to operate with many more types of inks.

Offset generally works with inks that are oil-based along with using some water-based and UV curable inks.

MAINTENANCE:
One thing to consider about offset is that the plates used in the process are susceptible to oxidation if
they're not cared for properly. For this reason, extra maintenance is often necessary to ensure plate quality.

AFFORDABILITY:
Flexo image carriers are generally a bit cheaper to create, and they also are typically more durable than the
plates used for offset -- meaning they can be re-used a few times before replacement is necessary.

What's more is the wider range of inks that flexo works with (notably the faster drying times with low
viscosity inks and UV inks) can accelerate print jobs and increase job profit.

CONVENIENCE:
As noted briefly above, offset printing can only be accomplished on a smooth, flat surface. Flexo, on the
other hand, can print on a wide variety of substrates, making it a more convenient choice for many.

Combine this with Flexo’s ability to use many more types of ink and the ease of printing more large-scale
tasks, it is often hailed as the superior choice.

So what process is right for you? It largely depends on the job, substrate and a variety of other factors of the
job you're printing.

8
What is Screen Printing?
Screen printing has evolved from the two color machine presses that were utilized in the 1960s for
various print applications. The old presses featured a long dryer between print stations, and wire
screens that were rigid and contained photographic emulsion.

Since the 1960s, the screen printing process has evolved greatly with the improvement of
technology and materials.

Label and Narrow Web magazine explains the modern process of screen printing:

“Screens, which come in a variety of meshes, are covered by chemical emulsions, which are the
proprietary products of the manufacturers. To prepare a screen for use, a film containing a positive
image is placed on the screen and exposed to light. The screen is then washed with water, which
removes unexposed emulsion and opens the mesh below the image areas. In exposed areas the
emulsion fuses together, closing all mesh openings to prohibit ink flow.”

Though the aforementioned process of screen printing is standard, there are two types of screen
printing, flat and rotary, that differ slightly in process.

Flat Screen Printing

During the process of flat screen printing, the exposed screen is arranged over the top of the chosen
substrate. The ink is then deposited in front of a squeegee. The squeegee then moves over the screen,
thusly forcing the ink through the mesh and creating a print.

Rotary Screen Printing

The rotary screen process differs slightly. Rather than the squeegee moving atop the screen, it is fixed
inside of the screen. The squeegee and screen are mounted ITR, and ink is introduced.

When the mounted cylinder rotates, the ink is forced through the mesh via the squeegee. The substrate
moves outside of the screen and receives the ink, producing a print.

9
Flexo Printing vs. Screen Printing
SUBSTRATES:
The substrates available for screen printing, specifically rotary screen printing, are limited when compared
to flexo. The most common substrates used for screen printing include:
● Textile
● Sign board
● Film
● Paper

Though flexo is not a common choice for printing on textiles, it does support a wider variety of substrates
and executes detailed prints.

INKS:
In general, the majority of inks used for rotary screen printing are UV curable, especially for use in narrow
web applications. There are some projects, however, that require solvent based inks, which can be used.
When it comes to color, white ink is the most popular in the screen printing market.

Flexo utilizes a wider variety of inks. A full guide to the inks used in flexo printing, and the considerations
based on application, can be found here.

SPEED:
Due to the high number of jobs that utilize UV curable inks, print speed is largely dependent on the ink, and
more specifically the amount of time the ink requires for curing.
Because of this, print run speeds are slower than that of flexo.

Corrugated Printing Considerations:

Today's advanced technologies and materials have revolutionized printing on corrugated
packaging materials. With modern printing technologies, and the ever-increasing capabilities of
flexo, brands can simultaneously use corrugated product boxes to increase product visibility and
promote a brand’s awareness, in addition to benefiting from the material's lightweight durability
which is ideal for shipping.

The variety of available processes and materials have created several methods for printing on
corrugated material, including flexography (flexo), offset lithography (litho), screen printing, and
digital printing. Due to its versatility, flexographic printing has become one of the most commonly
utilized.

We have a complete guide to Flexo Printing on Corrugated!

10
Four Options For Printing On Corrugated Surfaces
1. OFFSET LITHOGRAPHY (LITHO LAMINATION):
Not actually a direct printing method, lithography pre-prints images onto linerboard, which is then attached
to the corrugated substrate. While this is an option for all printing methods listed, this is the only way to
print on corrugated with litho, which guarantees an additional step in production. This method easily
accommodates foil stamping, spot gloss, embossing, and other embellishments and renders
high-resolution images. Lithography's nearly limitless options come at a premium. The set up, added
embellishments, and pre-printing method all increase costs.

2. SCREEN PRINTING
During the screen printing process, a squeegee forces ink through a screen, depositing color onto the
substrate. Stencils (masks) shield negative space from ink and allow ink to pass through onto colored
areas.A stencil is made for each separate color, and each color is applied separately. It is a time
consuming process that is often done by hand. It produces richly colored images, but it is most suitable
for small volume prints.

3. DIGITAL PRINTING
Digital printing presses function similarly to the printers we use at home. Unlike the other printing
methods, digital printing does not require the creation of printing plates because a digital press uses
electronic files to print images. Digital printing is capable of rendering high resolution images. This
method costs more per print than the other methods and moves more slowly, but without the need for
printing plates, set up is less expensive.This makes digital printing a great option for small volume
printing, samples, or test marketing.

3. FLEXOGRAPHY (FLEXO)

By far the most popular choice for printing on corrugated substrates, flexography uses an inked image
carrier to transfer graphics onto a substrate. The process is gentle enough for corrugated substrates and
can still achieve vibrant graphics on the final product.

Since flexography requires printing image carriers

(one per color), there is some up-front cost
associated with set up. Once the printing image
carriers are ready, however, flexography is a
cost-effective and high-speed method for printing
large volume orders with attractive graphics.

11
 Flexo Hybrid Presses:
The commercial printing industry has recently seen the popularity of hybrid presses grow.
Consumer products are requiring more intricate prints and durable final products, which in turn
has required printers to adjust their capabilities to meet demands.

This has resulted in many printers opting for hybrid presses which delivers more of the “pros” of
each of the above printing methods, without sacrificing quality or efficiency.

DIGITAL FLEXO HYBRID PRESSES:

One of the main reasons that printers are opting for digital flexo hybrid preses is it allows the
flexographic printing process to better accomplish shorter runs, without sacrificing the quality of
a final flexo print.

Hybrid presses enable full color digital inkjet technology to be utilized with an existing flexo
press. Brand new digital presses that feature flexo printing stations are also available.

Ready to Get Started with Flexo?

If you’re ready to get started printing with flexography, contact the experts at Luminite today. Our
team is eager to help manufacture and supply quality flexographic image carriers that are perfect
for your project requirements.

Web: www.luminite.com
Phone: 888-545-2270